Mercurial > hg > xemacs-beta
view src/scrollbar-gtk.c @ 665:fdefd0186b75
[xemacs-hg @ 2001-09-20 06:28:42 by ben]
The great integral types renaming.
The purpose of this is to rationalize the names used for various
integral types, so that they match their intended uses and follow
consist conventions, and eliminate types that were not semantically
different from each other.
The conventions are:
-- All integral types that measure quantities of anything are
signed. Some people disagree vociferously with this, but their
arguments are mostly theoretical, and are vastly outweighed by
the practical headaches of mixing signed and unsigned values,
and more importantly by the far increased likelihood of
inadvertent bugs: Because of the broken "viral" nature of
unsigned quantities in C (operations involving mixed
signed/unsigned are done unsigned, when exactly the opposite is
nearly always wanted), even a single error in declaring a
quantity unsigned that should be signed, or even the even more
subtle error of comparing signed and unsigned values and
forgetting the necessary cast, can be catastrophic, as
comparisons will yield wrong results. -Wsign-compare is turned
on specifically to catch this, but this tends to result in a
great number of warnings when mixing signed and unsigned, and
the casts are annoying. More has been written on this
elsewhere.
-- All such quantity types just mentioned boil down to EMACS_INT,
which is 32 bits on 32-bit machines and 64 bits on 64-bit
machines. This is guaranteed to be the same size as Lisp
objects of type `int', and (as far as I can tell) of size_t
(unsigned!) and ssize_t. The only type below that is not an
EMACS_INT is Hashcode, which is an unsigned value of the same
size as EMACS_INT.
-- Type names should be relatively short (no more than 10
characters or so), with the first letter capitalized and no
underscores if they can at all be avoided.
-- "count" == a zero-based measurement of some quantity. Includes
sizes, offsets, and indexes.
-- "bpos" == a one-based measurement of a position in a buffer.
"Charbpos" and "Bytebpos" count text in the buffer, rather than
bytes in memory; thus Bytebpos does not directly correspond to
the memory representation. Use "Membpos" for this.
-- "Char" refers to internal-format characters, not to the C type
"char", which is really a byte.
-- For the actual name changes, see the script below.
I ran the following script to do the conversion. (NOTE: This script
is idempotent. You can safely run it multiple times and it will
not screw up previous results -- in fact, it will do nothing if
nothing has changed. Thus, it can be run repeatedly as necessary
to handle patches coming in from old workspaces, or old branches.)
There are two tags, just before and just after the change:
`pre-integral-type-rename' and `post-integral-type-rename'. When
merging code from the main trunk into a branch, the best thing to
do is first merge up to `pre-integral-type-rename', then apply the
script and associated changes, then merge from
`post-integral-type-change' to the present. (Alternatively, just do
the merging in one operation; but you may then have a lot of
conflicts needing to be resolved by hand.)
Script `fixtypes.sh' follows:
----------------------------------- cut ------------------------------------
files="*.[ch] s/*.h m/*.h config.h.in ../configure.in Makefile.in.in ../lib-src/*.[ch] ../lwlib/*.[ch]"
gr Memory_Count Bytecount $files
gr Lstream_Data_Count Bytecount $files
gr Element_Count Elemcount $files
gr Hash_Code Hashcode $files
gr extcount bytecount $files
gr bufpos charbpos $files
gr bytind bytebpos $files
gr memind membpos $files
gr bufbyte intbyte $files
gr Extcount Bytecount $files
gr Bufpos Charbpos $files
gr Bytind Bytebpos $files
gr Memind Membpos $files
gr Bufbyte Intbyte $files
gr EXTCOUNT BYTECOUNT $files
gr BUFPOS CHARBPOS $files
gr BYTIND BYTEBPOS $files
gr MEMIND MEMBPOS $files
gr BUFBYTE INTBYTE $files
gr MEMORY_COUNT BYTECOUNT $files
gr LSTREAM_DATA_COUNT BYTECOUNT $files
gr ELEMENT_COUNT ELEMCOUNT $files
gr HASH_CODE HASHCODE $files
----------------------------------- cut ------------------------------------
`fixtypes.sh' is a Bourne-shell script; it uses 'gr':
----------------------------------- cut ------------------------------------
#!/bin/sh
# Usage is like this:
# gr FROM TO FILES ...
# globally replace FROM with TO in FILES. FROM and TO are regular expressions.
# backup files are stored in the `backup' directory.
from="$1"
to="$2"
shift 2
echo ${1+"$@"} | xargs global-replace "s/$from/$to/g"
----------------------------------- cut ------------------------------------
`gr' in turn uses a Perl script to do its real work,
`global-replace', which follows:
----------------------------------- cut ------------------------------------
: #-*- Perl -*-
### global-modify --- modify the contents of a file by a Perl expression
## Copyright (C) 1999 Martin Buchholz.
## Copyright (C) 2001 Ben Wing.
## Authors: Martin Buchholz <martin@xemacs.org>, Ben Wing <ben@xemacs.org>
## Maintainer: Ben Wing <ben@xemacs.org>
## Current Version: 1.0, May 5, 2001
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with XEmacs; see the file COPYING. If not, write to the Free
# Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
eval 'exec perl -w -S $0 ${1+"$@"}'
if 0;
use strict;
use FileHandle;
use Carp;
use Getopt::Long;
use File::Basename;
(my $myName = $0) =~ s@.*/@@; my $usage="
Usage: $myName [--help] [--backup-dir=DIR] [--line-mode] [--hunk-mode]
PERLEXPR FILE ...
Globally modify a file, either line by line or in one big hunk.
Typical usage is like this:
[with GNU print, GNU xargs: guaranteed to handle spaces, quotes, etc.
in file names]
find . -name '*.[ch]' -print0 | xargs -0 $0 's/\bCONST\b/const/g'\n
[with non-GNU print, xargs]
find . -name '*.[ch]' -print | xargs $0 's/\bCONST\b/const/g'\n
The file is read in, either line by line (with --line-mode specified)
or in one big hunk (with --hunk-mode specified; it's the default), and
the Perl expression is then evalled with \$_ set to the line or hunk of
text, including the terminating newline if there is one. It should
destructively modify the value there, storing the changed result in \$_.
Files in which any modifications are made are backed up to the directory
specified using --backup-dir, or to `backup' by default. To disable this,
use --backup-dir= with no argument.
Hunk mode is the default because it is MUCH MUCH faster than line-by-line.
Use line-by-line only when it matters, e.g. you want to do a replacement
only once per line (the default without the `g' argument). Conversely,
when using hunk mode, *ALWAYS* use `g'; otherwise, you will only make one
replacement in the entire file!
";
my %options = ();
$Getopt::Long::ignorecase = 0;
&GetOptions (
\%options,
'help', 'backup-dir=s', 'line-mode', 'hunk-mode',
);
die $usage if $options{"help"} or @ARGV <= 1;
my $code = shift;
die $usage if grep (-d || ! -w, @ARGV);
sub SafeOpen {
open ((my $fh = new FileHandle), $_[0]);
confess "Can't open $_[0]: $!" if ! defined $fh;
return $fh;
}
sub SafeClose {
close $_[0] or confess "Can't close $_[0]: $!";
}
sub FileContents {
my $fh = SafeOpen ("< $_[0]");
my $olddollarslash = $/;
local $/ = undef;
my $contents = <$fh>;
$/ = $olddollarslash;
return $contents;
}
sub WriteStringToFile {
my $fh = SafeOpen ("> $_[0]");
binmode $fh;
print $fh $_[1] or confess "$_[0]: $!\n";
SafeClose $fh;
}
foreach my $file (@ARGV) {
my $changed_p = 0;
my $new_contents = "";
if ($options{"line-mode"}) {
my $fh = SafeOpen $file;
while (<$fh>) {
my $save_line = $_;
eval $code;
$changed_p = 1 if $save_line ne $_;
$new_contents .= $_;
}
} else {
my $orig_contents = $_ = FileContents $file;
eval $code;
if ($_ ne $orig_contents) {
$changed_p = 1;
$new_contents = $_;
}
}
if ($changed_p) {
my $backdir = $options{"backup-dir"};
$backdir = "backup" if !defined ($backdir);
if ($backdir) {
my ($name, $path, $suffix) = fileparse ($file, "");
my $backfulldir = $path . $backdir;
my $backfile = "$backfulldir/$name";
mkdir $backfulldir, 0755 unless -d $backfulldir;
print "modifying $file (original saved in $backfile)\n";
rename $file, $backfile;
}
WriteStringToFile ($file, $new_contents);
}
}
----------------------------------- cut ------------------------------------
In addition to those programs, I needed to fix up a few other
things, particularly relating to the duplicate definitions of
types, now that some types merged with others. Specifically:
1. in lisp.h, removed duplicate declarations of Bytecount. The
changed code should now look like this: (In each code snippet
below, the first and last lines are the same as the original, as
are all lines outside of those lines. That allows you to locate
the section to be replaced, and replace the stuff in that
section, verifying that there isn't anything new added that
would need to be kept.)
--------------------------------- snip -------------------------------------
/* Counts of bytes or chars */
typedef EMACS_INT Bytecount;
typedef EMACS_INT Charcount;
/* Counts of elements */
typedef EMACS_INT Elemcount;
/* Hash codes */
typedef unsigned long Hashcode;
/* ------------------------ dynamic arrays ------------------- */
--------------------------------- snip -------------------------------------
2. in lstream.h, removed duplicate declaration of Bytecount.
Rewrote the comment about this type. The changed code should
now look like this:
--------------------------------- snip -------------------------------------
#endif
/* The have been some arguments over the what the type should be that
specifies a count of bytes in a data block to be written out or read in,
using Lstream_read(), Lstream_write(), and related functions.
Originally it was long, which worked fine; Martin "corrected" these to
size_t and ssize_t on the grounds that this is theoretically cleaner and
is in keeping with the C standards. Unfortunately, this practice is
horribly error-prone due to design flaws in the way that mixed
signed/unsigned arithmetic happens. In fact, by doing this change,
Martin introduced a subtle but fatal error that caused the operation of
sending large mail messages to the SMTP server under Windows to fail.
By putting all values back to be signed, avoiding any signed/unsigned
mixing, the bug immediately went away. The type then in use was
Lstream_Data_Count, so that it be reverted cleanly if a vote came to
that. Now it is Bytecount.
Some earlier comments about why the type must be signed: This MUST BE
SIGNED, since it also is used in functions that return the number of
bytes actually read to or written from in an operation, and these
functions can return -1 to signal error.
Note that the standard Unix read() and write() functions define the
count going in as a size_t, which is UNSIGNED, and the count going
out as an ssize_t, which is SIGNED. This is a horrible design
flaw. Not only is it highly likely to lead to logic errors when a
-1 gets interpreted as a large positive number, but operations are
bound to fail in all sorts of horrible ways when a number in the
upper-half of the size_t range is passed in -- this number is
unrepresentable as an ssize_t, so code that checks to see how many
bytes are actually written (which is mandatory if you are dealing
with certain types of devices) will get completely screwed up.
--ben
*/
typedef enum lstream_buffering
--------------------------------- snip -------------------------------------
3. in dumper.c, there are four places, all inside of switch()
statements, where XD_BYTECOUNT appears twice as a case tag. In
each case, the two case blocks contain identical code, and you
should *REMOVE THE SECOND* and leave the first.
author | ben |
---|---|
date | Thu, 20 Sep 2001 06:31:11 +0000 |
parents | af57a77cbc92 |
children | e38acbeb1cae |
line wrap: on
line source
/* scrollbar implementation -- X interface. Copyright (C) 1994, 1995 Board of Trustees, University of Illinois. Copyright (C) 1994 Amdhal Corporation. Copyright (C) 1995 Sun Microsystems, Inc. Copyright (C) 1995 Darrell Kindred <dkindred+@cmu.edu>. This file is part of XEmacs. XEmacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. XEmacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with XEmacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Synched up with: Not in FSF. */ /* Gtk version by William M. Perry */ #include <config.h> #include "lisp.h" #include "console-gtk.h" #include "glyphs-gtk.h" #include "gui-gtk.h" #include "scrollbar-gtk.h" #include "frame.h" #include "window.h" static gboolean scrollbar_cb (GtkAdjustment *adj, gpointer user_data); /* Used to prevent changing the size of the slider while drag scrolling, under Motif. This is necessary because the Motif scrollbar is incredibly stupid about updating the slider and causes lots of flicker if it is done too often. */ static int inhibit_slider_size_change; static int vertical_drag_in_progress; /* A device method. */ static int gtk_inhibit_scrollbar_slider_size_change (void) { return inhibit_slider_size_change; } /* A device method. */ static void gtk_free_scrollbar_instance (struct scrollbar_instance *instance) { if (SCROLLBAR_GTK_WIDGET (instance)) { gtk_widget_hide_all (SCROLLBAR_GTK_WIDGET (instance)); gtk_widget_destroy (SCROLLBAR_GTK_WIDGET (instance)); } if (instance->scrollbar_data) xfree (instance->scrollbar_data); } /* A device method. */ static void gtk_release_scrollbar_instance (struct scrollbar_instance *instance) { /* It won't hurt to hide it all the time, will it? */ gtk_widget_hide_all (SCROLLBAR_GTK_WIDGET (instance)); } static gboolean scrollbar_drag_hack_cb (GtkWidget *w, GdkEventButton *ev, gpointer v) { vertical_drag_in_progress = (int) v; inhibit_slider_size_change = (int) v; return (FALSE); } /* A device method. */ static void gtk_create_scrollbar_instance (struct frame *f, int vertical, struct scrollbar_instance *instance) { GtkAdjustment *adj = GTK_ADJUSTMENT (gtk_adjustment_new (0,0,0,0,0,0)); GtkScrollbar *sb = NULL; /* initialize the X specific data section. */ instance->scrollbar_data = xnew_and_zero (struct gtk_scrollbar_data); SCROLLBAR_GTK_ID (instance) = new_gui_id (); SCROLLBAR_GTK_VDRAG_ORIG_VALUE (instance) = -1; SCROLLBAR_GTK_LAST_VALUE (instance) = adj->value; gtk_object_set_data (GTK_OBJECT (adj), "xemacs::gui_id", (void *) SCROLLBAR_GTK_ID (instance)); gtk_object_set_data (GTK_OBJECT (adj), "xemacs::frame", f); sb = GTK_SCROLLBAR (vertical ? gtk_vscrollbar_new (adj) : gtk_hscrollbar_new (adj)); SCROLLBAR_GTK_WIDGET (instance) = GTK_WIDGET (sb); gtk_signal_connect (GTK_OBJECT (adj),"value-changed", GTK_SIGNAL_FUNC (scrollbar_cb), (gpointer) vertical); gtk_signal_connect (GTK_OBJECT (sb), "button-press-event", GTK_SIGNAL_FUNC (scrollbar_drag_hack_cb), (gpointer) 1); gtk_signal_connect (GTK_OBJECT (sb), "button-release-event", GTK_SIGNAL_FUNC (scrollbar_drag_hack_cb), (gpointer) 0); gtk_fixed_put (GTK_FIXED (FRAME_GTK_TEXT_WIDGET (f)), SCROLLBAR_GTK_WIDGET (instance), 0, 0); /* ** With gtk version > 1.2.8 the scrollbars in gtk-xemacs and xemacs ** from CVS are invisible. In fact they are not invisible but very ** thin (0 pixels wide). This is so, because the new gtk code does ** not call gtk_widget_request_size() on the newly created ** scrollbars anymore. this change was done to allow the theme ** engines to manipulate the scrollbar width. This patch calls ** gtk_widget_request_size with the newly created scollbars. Maybe ** it is better to postpone this call just before the ** gtk_widget_show() call is done on the scrolbar. */ gtk_widget_size_request(GTK_WIDGET(sb), &(GTK_WIDGET(sb)->requisition)); gtk_widget_hide (SCROLLBAR_GTK_WIDGET (instance)); } #define UPDATE_DATA_FIELD(field) \ if (new_##field >= 0 && \ SCROLLBAR_GTK_POS_DATA (inst).field != new_##field) { \ SCROLLBAR_GTK_POS_DATA (inst).field = new_##field; \ inst->scrollbar_instance_changed = 1; \ } /* A device method. */ /* #### The -1 check is such a hack. */ static void gtk_update_scrollbar_instance_values (struct window *w, struct scrollbar_instance *inst, int new_line_increment, int new_page_increment, int new_minimum, int new_maximum, int new_slider_size, int new_slider_position, int new_scrollbar_width, int new_scrollbar_height, int new_scrollbar_x, int new_scrollbar_y) { UPDATE_DATA_FIELD (line_increment); UPDATE_DATA_FIELD (page_increment); UPDATE_DATA_FIELD (minimum); UPDATE_DATA_FIELD (maximum); UPDATE_DATA_FIELD (slider_size); UPDATE_DATA_FIELD (slider_position); UPDATE_DATA_FIELD (scrollbar_width); UPDATE_DATA_FIELD (scrollbar_height); UPDATE_DATA_FIELD (scrollbar_x); UPDATE_DATA_FIELD (scrollbar_y); if (w && !vertical_drag_in_progress) { int new_vov = SCROLLBAR_GTK_POS_DATA (inst).slider_position; int new_vows = marker_position (w->start[CURRENT_DISP]); if (SCROLLBAR_GTK_VDRAG_ORIG_VALUE (inst) != new_vov) { SCROLLBAR_GTK_VDRAG_ORIG_VALUE (inst) = new_vov; inst->scrollbar_instance_changed = 1; } if (SCROLLBAR_GTK_VDRAG_ORIG_WINDOW_START (inst) != new_vows) { SCROLLBAR_GTK_VDRAG_ORIG_WINDOW_START (inst) = new_vows; inst->scrollbar_instance_changed = 1; } } } /* Used by gtk_update_scrollbar_instance_status. */ static void update_one_widget_scrollbar_pointer (struct window *w, GtkWidget *wid) { if (!wid->window) gtk_widget_realize (wid); if (POINTER_IMAGE_INSTANCEP (w->scrollbar_pointer)) { gdk_window_set_cursor (GET_GTK_WIDGET_WINDOW (wid), XIMAGE_INSTANCE_GTK_CURSOR (w->scrollbar_pointer)); gdk_flush (); } } /* A device method. */ static void gtk_update_scrollbar_instance_status (struct window *w, int active, int size, struct scrollbar_instance *instance) { struct frame *f = XFRAME (w->frame); GtkWidget *wid = SCROLLBAR_GTK_WIDGET (instance); gboolean managed = GTK_WIDGET_MAPPED (wid); if (active && size) { if (instance->scrollbar_instance_changed) { /* Need to set the height, width, and position of the widget */ GtkAdjustment *adj = gtk_range_get_adjustment (GTK_RANGE (wid)); scrollbar_values *pos_data = & SCROLLBAR_GTK_POS_DATA (instance); int modified_p = 0; /* We do not want to update the size all the time if we can help it. This cuts down on annoying flicker. */ if ((wid->allocation.width != pos_data->scrollbar_width) || (wid->allocation.height != pos_data->scrollbar_height)) { gtk_widget_set_usize (wid, pos_data->scrollbar_width, pos_data->scrollbar_height); modified_p = 1; } /* Ditto for the x/y position. */ if ((wid->allocation.x != pos_data->scrollbar_x) || (wid->allocation.y != pos_data->scrollbar_y)) { gtk_fixed_move (GTK_FIXED (FRAME_GTK_TEXT_WIDGET (f)), wid, pos_data->scrollbar_x, pos_data->scrollbar_y); modified_p = 1; } adj->lower = pos_data->minimum; adj->upper = pos_data->maximum; adj->page_increment = pos_data->slider_size + 1; adj->step_increment = w->max_line_len - 1; adj->page_size = pos_data->slider_size + 1; adj->value = pos_data->slider_position; /* But, if we didn't resize or move the scrollbar, the widget will not get redrawn correctly when the user scrolls around in the XEmacs frame manually. So we update the slider manually here. */ if (!modified_p) gtk_range_slider_update (GTK_RANGE (wid)); instance->scrollbar_instance_changed = 0; } if (!managed) { gtk_widget_show (wid); update_one_widget_scrollbar_pointer (w, wid); } } else if (managed) { gtk_widget_hide (wid); } } enum gtk_scrollbar_loop { GTK_FIND_SCROLLBAR_WINDOW_MIRROR, GTK_SET_SCROLLBAR_POINTER, GTK_WINDOW_IS_SCROLLBAR, GTK_UPDATE_FRAME_SCROLLBARS }; static struct window_mirror * gtk_scrollbar_loop (enum gtk_scrollbar_loop type, Lisp_Object window, struct window_mirror *mir, GUI_ID id, GdkWindow *x_win) { struct window_mirror *retval = NULL; while (mir) { struct scrollbar_instance *vinstance = mir->scrollbar_vertical_instance; struct scrollbar_instance *hinstance = mir->scrollbar_horizontal_instance; struct window *w = XWINDOW (window); if (mir->vchild) retval = gtk_scrollbar_loop (type, w->vchild, mir->vchild, id, x_win); else if (mir->hchild) retval = gtk_scrollbar_loop (type, w->hchild, mir->hchild, id, x_win); if (retval) return retval; if (hinstance || vinstance) { switch (type) { case GTK_FIND_SCROLLBAR_WINDOW_MIRROR: if ((vinstance && SCROLLBAR_GTK_ID (vinstance) == id) || (hinstance && SCROLLBAR_GTK_ID (hinstance) == id)) return mir; break; case GTK_UPDATE_FRAME_SCROLLBARS: if (!mir->vchild && !mir->hchild) update_window_scrollbars (w, mir, 1, 0); break; case GTK_SET_SCROLLBAR_POINTER: if (!mir->vchild && !mir->hchild) { GtkWidget *widget; widget = SCROLLBAR_GTK_WIDGET (hinstance); if (widget && GTK_WIDGET_MAPPED (widget)) update_one_widget_scrollbar_pointer (w, widget); widget = SCROLLBAR_GTK_WIDGET (vinstance); if (widget && GTK_WIDGET_MAPPED (widget)) update_one_widget_scrollbar_pointer (w, widget); } break; case GTK_WINDOW_IS_SCROLLBAR: if (!mir->vchild && !mir->hchild) { GtkWidget *widget; widget = SCROLLBAR_GTK_WIDGET (hinstance); if (widget && GTK_WIDGET_MAPPED (widget) && GET_GTK_WIDGET_WINDOW (widget) == x_win) return (struct window_mirror *) 1; widget = SCROLLBAR_GTK_WIDGET (vinstance); if (widget && GTK_WIDGET_MAPPED (widget) && GET_GTK_WIDGET_WINDOW (widget) == x_win) return (struct window_mirror *) 1; } break; default: abort (); } } mir = mir->next; window = w->next; } return NULL; } /* Used by callbacks. */ static struct window_mirror * find_scrollbar_window_mirror (struct frame *f, GUI_ID id) { if (f->mirror_dirty) update_frame_window_mirror (f); return gtk_scrollbar_loop (GTK_FIND_SCROLLBAR_WINDOW_MIRROR, f->root_window, XWINDOW_MIRROR (f->root_mirror), id, (GdkWindow *) NULL); } static gboolean scrollbar_cb (GtkAdjustment *adj, gpointer user_data) { /* This function can GC */ int vertical = (int) user_data; struct frame *f = gtk_object_get_data (GTK_OBJECT (adj), "xemacs::frame"); struct scrollbar_instance *instance; GUI_ID id = (GUI_ID) gtk_object_get_data (GTK_OBJECT (adj), "xemacs::gui_id"); Lisp_Object win, frame; struct window_mirror *mirror; Lisp_Object event_type = Qnil; Lisp_Object event_data = Qnil; if (!f) return(FALSE); mirror = find_scrollbar_window_mirror (f, id); if (!mirror) return(FALSE); win = real_window (mirror, 1); if (NILP (win)) return(FALSE); instance = vertical ? mirror->scrollbar_vertical_instance : mirror->scrollbar_horizontal_instance; frame = WINDOW_FRAME (XWINDOW (win)); inhibit_slider_size_change = 0; switch (GTK_RANGE (SCROLLBAR_GTK_WIDGET (instance))->scroll_type) { case GTK_SCROLL_PAGE_BACKWARD: event_type = vertical ? Qscrollbar_page_up : Qscrollbar_page_left; event_data = Fcons (win, Qnil); break; case GTK_SCROLL_PAGE_FORWARD: event_type = vertical ? Qscrollbar_page_down : Qscrollbar_page_right; event_data = Fcons (win, Qnil); break; case GTK_SCROLL_STEP_FORWARD: event_type = vertical ? Qscrollbar_line_down : Qscrollbar_char_right; event_data = win; break; case GTK_SCROLL_STEP_BACKWARD: event_type = vertical ? Qscrollbar_line_up : Qscrollbar_char_left; event_data = win; break; case GTK_SCROLL_NONE: case GTK_SCROLL_JUMP: inhibit_slider_size_change = 1; event_type = vertical ? Qscrollbar_vertical_drag : Qscrollbar_horizontal_drag; event_data = Fcons (win, make_int ((int)adj->value)); break; default: abort(); } signal_special_gtk_user_event (frame, event_type, event_data); return (TRUE); } static void gtk_scrollbar_pointer_changed_in_window (struct window *w) { Lisp_Object window; XSETWINDOW (window, w); gtk_scrollbar_loop (GTK_SET_SCROLLBAR_POINTER, window, find_window_mirror (w), 0, (GdkWindow *) NULL); } /* #### BILL!!! This comment is not true for Gtk - should it be? */ /* Make sure that all scrollbars on frame are up-to-date. Called directly from gtk_set_frame_properties in frame-gtk.c*/ void gtk_update_frame_scrollbars (struct frame *f) { /* Consider this code to be "in_display" so that we abort() if Fsignal() gets called. */ in_display++; gtk_scrollbar_loop (GTK_UPDATE_FRAME_SCROLLBARS, f->root_window, XWINDOW_MIRROR (f->root_mirror), 0, (GdkWindow *) NULL); in_display--; if (in_display < 0) abort (); } #ifdef MEMORY_USAGE_STATS static int gtk_compute_scrollbar_instance_usage (struct device *d, struct scrollbar_instance *inst, struct overhead_stats *ovstats) { int total = 0; while (inst) { struct gtk_scrollbar_data *data = (struct gtk_scrollbar_data *) inst->scrollbar_data; total += malloced_storage_size (data, sizeof (*data), ovstats); inst = inst->next; } return total; } #endif /* MEMORY_USAGE_STATS */ /************************************************************************/ /* initialization */ /************************************************************************/ void console_type_create_scrollbar_gtk (void) { CONSOLE_HAS_METHOD (gtk, inhibit_scrollbar_slider_size_change); CONSOLE_HAS_METHOD (gtk, free_scrollbar_instance); CONSOLE_HAS_METHOD (gtk, release_scrollbar_instance); CONSOLE_HAS_METHOD (gtk, create_scrollbar_instance); CONSOLE_HAS_METHOD (gtk, update_scrollbar_instance_values); CONSOLE_HAS_METHOD (gtk, update_scrollbar_instance_status); CONSOLE_HAS_METHOD (gtk, scrollbar_pointer_changed_in_window); #ifdef MEMORY_USAGE_STATS CONSOLE_HAS_METHOD (gtk, compute_scrollbar_instance_usage); #endif /* MEMORY_USAGE_STATS */ } void vars_of_scrollbar_gtk (void) { Fprovide (intern ("gtk-scrollbars")); }