view lisp/dragdrop.el @ 665:fdefd0186b75

[xemacs-hg @ 2001-09-20 06:28:42 by ben] The great integral types renaming. The purpose of this is to rationalize the names used for various integral types, so that they match their intended uses and follow consist conventions, and eliminate types that were not semantically different from each other. The conventions are: -- All integral types that measure quantities of anything are signed. Some people disagree vociferously with this, but their arguments are mostly theoretical, and are vastly outweighed by the practical headaches of mixing signed and unsigned values, and more importantly by the far increased likelihood of inadvertent bugs: Because of the broken "viral" nature of unsigned quantities in C (operations involving mixed signed/unsigned are done unsigned, when exactly the opposite is nearly always wanted), even a single error in declaring a quantity unsigned that should be signed, or even the even more subtle error of comparing signed and unsigned values and forgetting the necessary cast, can be catastrophic, as comparisons will yield wrong results. -Wsign-compare is turned on specifically to catch this, but this tends to result in a great number of warnings when mixing signed and unsigned, and the casts are annoying. More has been written on this elsewhere. -- All such quantity types just mentioned boil down to EMACS_INT, which is 32 bits on 32-bit machines and 64 bits on 64-bit machines. This is guaranteed to be the same size as Lisp objects of type `int', and (as far as I can tell) of size_t (unsigned!) and ssize_t. The only type below that is not an EMACS_INT is Hashcode, which is an unsigned value of the same size as EMACS_INT. -- Type names should be relatively short (no more than 10 characters or so), with the first letter capitalized and no underscores if they can at all be avoided. -- "count" == a zero-based measurement of some quantity. Includes sizes, offsets, and indexes. -- "bpos" == a one-based measurement of a position in a buffer. "Charbpos" and "Bytebpos" count text in the buffer, rather than bytes in memory; thus Bytebpos does not directly correspond to the memory representation. Use "Membpos" for this. -- "Char" refers to internal-format characters, not to the C type "char", which is really a byte. -- For the actual name changes, see the script below. I ran the following script to do the conversion. (NOTE: This script is idempotent. You can safely run it multiple times and it will not screw up previous results -- in fact, it will do nothing if nothing has changed. Thus, it can be run repeatedly as necessary to handle patches coming in from old workspaces, or old branches.) There are two tags, just before and just after the change: `pre-integral-type-rename' and `post-integral-type-rename'. When merging code from the main trunk into a branch, the best thing to do is first merge up to `pre-integral-type-rename', then apply the script and associated changes, then merge from `post-integral-type-change' to the present. (Alternatively, just do the merging in one operation; but you may then have a lot of conflicts needing to be resolved by hand.) Script `fixtypes.sh' follows: ----------------------------------- cut ------------------------------------ files="*.[ch] s/*.h m/*.h config.h.in ../configure.in Makefile.in.in ../lib-src/*.[ch] ../lwlib/*.[ch]" gr Memory_Count Bytecount $files gr Lstream_Data_Count Bytecount $files gr Element_Count Elemcount $files gr Hash_Code Hashcode $files gr extcount bytecount $files gr bufpos charbpos $files gr bytind bytebpos $files gr memind membpos $files gr bufbyte intbyte $files gr Extcount Bytecount $files gr Bufpos Charbpos $files gr Bytind Bytebpos $files gr Memind Membpos $files gr Bufbyte Intbyte $files gr EXTCOUNT BYTECOUNT $files gr BUFPOS CHARBPOS $files gr BYTIND BYTEBPOS $files gr MEMIND MEMBPOS $files gr BUFBYTE INTBYTE $files gr MEMORY_COUNT BYTECOUNT $files gr LSTREAM_DATA_COUNT BYTECOUNT $files gr ELEMENT_COUNT ELEMCOUNT $files gr HASH_CODE HASHCODE $files ----------------------------------- cut ------------------------------------ `fixtypes.sh' is a Bourne-shell script; it uses 'gr': ----------------------------------- cut ------------------------------------ #!/bin/sh # Usage is like this: # gr FROM TO FILES ... # globally replace FROM with TO in FILES. FROM and TO are regular expressions. # backup files are stored in the `backup' directory. from="$1" to="$2" shift 2 echo ${1+"$@"} | xargs global-replace "s/$from/$to/g" ----------------------------------- cut ------------------------------------ `gr' in turn uses a Perl script to do its real work, `global-replace', which follows: ----------------------------------- cut ------------------------------------ : #-*- Perl -*- ### global-modify --- modify the contents of a file by a Perl expression ## Copyright (C) 1999 Martin Buchholz. ## Copyright (C) 2001 Ben Wing. ## Authors: Martin Buchholz <martin@xemacs.org>, Ben Wing <ben@xemacs.org> ## Maintainer: Ben Wing <ben@xemacs.org> ## Current Version: 1.0, May 5, 2001 # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with XEmacs; see the file COPYING. If not, write to the Free # Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. eval 'exec perl -w -S $0 ${1+"$@"}' if 0; use strict; use FileHandle; use Carp; use Getopt::Long; use File::Basename; (my $myName = $0) =~ s@.*/@@; my $usage=" Usage: $myName [--help] [--backup-dir=DIR] [--line-mode] [--hunk-mode] PERLEXPR FILE ... Globally modify a file, either line by line or in one big hunk. Typical usage is like this: [with GNU print, GNU xargs: guaranteed to handle spaces, quotes, etc. in file names] find . -name '*.[ch]' -print0 | xargs -0 $0 's/\bCONST\b/const/g'\n [with non-GNU print, xargs] find . -name '*.[ch]' -print | xargs $0 's/\bCONST\b/const/g'\n The file is read in, either line by line (with --line-mode specified) or in one big hunk (with --hunk-mode specified; it's the default), and the Perl expression is then evalled with \$_ set to the line or hunk of text, including the terminating newline if there is one. It should destructively modify the value there, storing the changed result in \$_. Files in which any modifications are made are backed up to the directory specified using --backup-dir, or to `backup' by default. To disable this, use --backup-dir= with no argument. Hunk mode is the default because it is MUCH MUCH faster than line-by-line. Use line-by-line only when it matters, e.g. you want to do a replacement only once per line (the default without the `g' argument). Conversely, when using hunk mode, *ALWAYS* use `g'; otherwise, you will only make one replacement in the entire file! "; my %options = (); $Getopt::Long::ignorecase = 0; &GetOptions ( \%options, 'help', 'backup-dir=s', 'line-mode', 'hunk-mode', ); die $usage if $options{"help"} or @ARGV <= 1; my $code = shift; die $usage if grep (-d || ! -w, @ARGV); sub SafeOpen { open ((my $fh = new FileHandle), $_[0]); confess "Can't open $_[0]: $!" if ! defined $fh; return $fh; } sub SafeClose { close $_[0] or confess "Can't close $_[0]: $!"; } sub FileContents { my $fh = SafeOpen ("< $_[0]"); my $olddollarslash = $/; local $/ = undef; my $contents = <$fh>; $/ = $olddollarslash; return $contents; } sub WriteStringToFile { my $fh = SafeOpen ("> $_[0]"); binmode $fh; print $fh $_[1] or confess "$_[0]: $!\n"; SafeClose $fh; } foreach my $file (@ARGV) { my $changed_p = 0; my $new_contents = ""; if ($options{"line-mode"}) { my $fh = SafeOpen $file; while (<$fh>) { my $save_line = $_; eval $code; $changed_p = 1 if $save_line ne $_; $new_contents .= $_; } } else { my $orig_contents = $_ = FileContents $file; eval $code; if ($_ ne $orig_contents) { $changed_p = 1; $new_contents = $_; } } if ($changed_p) { my $backdir = $options{"backup-dir"}; $backdir = "backup" if !defined ($backdir); if ($backdir) { my ($name, $path, $suffix) = fileparse ($file, ""); my $backfulldir = $path . $backdir; my $backfile = "$backfulldir/$name"; mkdir $backfulldir, 0755 unless -d $backfulldir; print "modifying $file (original saved in $backfile)\n"; rename $file, $backfile; } WriteStringToFile ($file, $new_contents); } } ----------------------------------- cut ------------------------------------ In addition to those programs, I needed to fix up a few other things, particularly relating to the duplicate definitions of types, now that some types merged with others. Specifically: 1. in lisp.h, removed duplicate declarations of Bytecount. The changed code should now look like this: (In each code snippet below, the first and last lines are the same as the original, as are all lines outside of those lines. That allows you to locate the section to be replaced, and replace the stuff in that section, verifying that there isn't anything new added that would need to be kept.) --------------------------------- snip ------------------------------------- /* Counts of bytes or chars */ typedef EMACS_INT Bytecount; typedef EMACS_INT Charcount; /* Counts of elements */ typedef EMACS_INT Elemcount; /* Hash codes */ typedef unsigned long Hashcode; /* ------------------------ dynamic arrays ------------------- */ --------------------------------- snip ------------------------------------- 2. in lstream.h, removed duplicate declaration of Bytecount. Rewrote the comment about this type. The changed code should now look like this: --------------------------------- snip ------------------------------------- #endif /* The have been some arguments over the what the type should be that specifies a count of bytes in a data block to be written out or read in, using Lstream_read(), Lstream_write(), and related functions. Originally it was long, which worked fine; Martin "corrected" these to size_t and ssize_t on the grounds that this is theoretically cleaner and is in keeping with the C standards. Unfortunately, this practice is horribly error-prone due to design flaws in the way that mixed signed/unsigned arithmetic happens. In fact, by doing this change, Martin introduced a subtle but fatal error that caused the operation of sending large mail messages to the SMTP server under Windows to fail. By putting all values back to be signed, avoiding any signed/unsigned mixing, the bug immediately went away. The type then in use was Lstream_Data_Count, so that it be reverted cleanly if a vote came to that. Now it is Bytecount. Some earlier comments about why the type must be signed: This MUST BE SIGNED, since it also is used in functions that return the number of bytes actually read to or written from in an operation, and these functions can return -1 to signal error. Note that the standard Unix read() and write() functions define the count going in as a size_t, which is UNSIGNED, and the count going out as an ssize_t, which is SIGNED. This is a horrible design flaw. Not only is it highly likely to lead to logic errors when a -1 gets interpreted as a large positive number, but operations are bound to fail in all sorts of horrible ways when a number in the upper-half of the size_t range is passed in -- this number is unrepresentable as an ssize_t, so code that checks to see how many bytes are actually written (which is mandatory if you are dealing with certain types of devices) will get completely screwed up. --ben */ typedef enum lstream_buffering --------------------------------- snip ------------------------------------- 3. in dumper.c, there are four places, all inside of switch() statements, where XD_BYTECOUNT appears twice as a case tag. In each case, the two case blocks contain identical code, and you should *REMOVE THE SECOND* and leave the first.
author ben
date Thu, 20 Sep 2001 06:31:11 +0000
parents 8f3fb4fd879b
children 79940b592197
line wrap: on
line source

;;; dragdrop.el --- window system-independent Drag'n'Drop support.

;; Copyright (C) 1998 Oliver Graf <ograf@fga.de>

;; Maintainer: XEmacs Development Team, Oliver Graf <ograf@fga.de>
;; Keywords: mouse, gui, dumped

;; This file is part of XEmacs.

;; XEmacs is free software; you can redistribute it and/or modify it
;; under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; XEmacs is distributed in the hope that it will be useful, but
;; WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
;; General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with XEmacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Synched up with: Not in FSF.

;;; Commentary:

;; This file is dumped with XEmacs (when drag'n'drop support is compiled in).

;;; Code:

;; we need mouse-set-point
(require 'mouse)
(provide 'dragdrop)

;; I think this is a better name for the custom group
;; looks better in the menu and the group display as dragdrop
;; Anyway: is dragdrop- a good prefix for all this?
;; What if someone trys drop<TAB> in the minibuffer?
(defgroup drag-n-drop nil
  "*{EXPERIMENTAL} Window system-independent drag'n'drop support."
  :group 'editing)

(defcustom dragdrop-drop-at-point nil
  "*{EXPERIMENTAL} If non-nil, drop text at the cursor location.
Otherwise, the cursor will be moved to the location of the pointer drop before
text is inserted."
  :type 'boolean
  :group 'drag-n-drop)

(defcustom dragdrop-autoload-tm-view nil
  "*{EXPERIMENTAL} If non-nil, autoload tm-view to decode MIME data.
Otherwise, the buffer is only decoded if tm-view is already available."
  :type 'boolean
  :group 'drag-n-drop)

;; the widget for editing the drop-functions
(define-widget 'dragdrop-function-widget 'list
  "*{EXPERIMENTAL} Widget for editing drop dispatch functions."
  :args `((choice :tag "Function"
		  (function-item experimental-dragdrop-drop-url-default)
		  (function-item experimental-dragdrop-drop-mime-default)
		  (function-item experimental-dragdrop-drop-log-function)
		  (function :tag "Other" nil))
	  (choice :tag "Button" :value t
		  (choice-item :tag "Ignore" t)
		  (choice-item 0) (choice-item 1) (choice-item 2)
		  (choice-item 3) (choice-item 4) (choice-item 5)
		  (choice-item 6) (choice-item 7))
	  (radio-button-choice :tag "Modifiers"
			       (const :tag "Ignore Modifier Keys" t)
			       (checklist :greedy t
					  :format "Modifier Keys:\n%v"
					  :extra-offset 6
					  (const shift)
					  (const control)
					  (const meta)
					  (const alt)
					  (const hyper)
					  (const super)))
	  (repeat :inline t :value nil :tag "Extra Function Arguments"
		  (sexp :tag "Arg" :value nil)))
  :value '(nil t t))

(defcustom experimental-dragdrop-drop-functions '((experimental-dragdrop-drop-url-default t t)
						  (experimental-dragdrop-drop-mime-default t t))
  "*{EXPERIMENTAL} This is the standart drop function search list.
Each element is a list of a function, a button selector, a modifier
selector and optional argumets to the function call.
The function must accept at least two arguments: first is the event
of the drop, second the object data, followed by any of the optional
arguments provided in this list.
The functions are called in order, until one returns t."
  :group 'drag-n-drop
  :type '(repeat dragdrop-function-widget))

(defgroup dnd-debug nil
  "*{EXPERIMENTAL} Drag'n'Drop debugging options."
  :group 'drag-n-drop)

(defcustom dragdrop-drop-log nil
  "*{EXPERIMENTAL} If non-nil, every drop is logged.
The name of the buffer is set in the custom 'dragdrop-drop-log-name"
  :group 'dnd-debug
  :type 'boolean)

(defcustom dragdrop-drop-log-name "*drop log buffer*"
  "*{EXPERIMENTAL} The name of the buffer used to log drops.
Set dragdrop-drop-log to non-nil to enable this feature."
  :group 'dnd-debug
  :type 'string)

(defvar dragdrop-drop-log-buffer nil
  "*{EXPERIMENTAL} Buffer to log drops in debug mode.")

;;
;; Drop API
;;
(defun dragdrop-drop-dispatch (object)
  "*{EXPERIMENTAL} This function identifies DROP type misc-user-events.
It calls functions which will handle the drag."
  (let ((event current-mouse-event))
    (and dragdrop-drop-log
	 (experimental-dragdrop-drop-log-function event object))
    (dragdrop-drop-find-functions event object)))

(defun dragdrop-drop-find-functions (event object)
  "Finds valid drop-handle functions and executes them to dispose the drop.
It does this by looking for extent-properties called
'experimental-dragdrop-drop-functions and for variables named like this."
  (catch 'dragdrop-drop-is-done
    (and (event-over-text-area-p event)
	 ;; let's search the extents
	 (catch 'dragdrop-extents-done
	   (let ((window (event-window event))
		 (pos (event-point event))
		 (cpos (event-closest-point event))
		 (buffer nil))
	     (or window (throw 'dragdrop-extents-done nil))
	     (or pos (setq pos cpos))
	     (select-window window)
	     (setq buffer (window-buffer))
	     (let ((ext (extent-at pos buffer 'experimental-dragdrop-drop-functions)))
	       (while (not (eq ext nil))
		 (dragdrop-drop-do-functions
		  (extent-property ext 'experimental-dragdrop-drop-functions)
		  event
		  object)
		 (setq ext (extent-at pos buffer
				      'experimental-dragdrop-drop-functions
				      ext)))))))
    ;; now look into the variable experimental-dragdrop-drop-functions
    (dragdrop-drop-do-functions experimental-dragdrop-drop-functions event object)))

(defun dragdrop-compare-mods (first-mods second-mods)
  "Returns t if both first-mods and second-mods contain the same elements.
Order is not important."
  (let ((moda (copy-sequence first-mods))
	(modb (copy-sequence second-mods)))
    (while (and (not (eq moda ()))
		(not (eq modb ())))
      (setq modb (delete (car moda) modb))
      (setq moda (delete (car moda) moda)))
    (and (eq moda ())
	 (eq modb ()))))

(defun dragdrop-drop-do-functions (drop-funs event object)
  "Calls all functions in drop-funs with object until one returns t.
Returns t if one of drop-funs returns t. Otherwise returns nil."
  (let ((flist nil)
	(button (event-button event))
	(mods (event-modifiers event)))
    (while (not (eq drop-funs ()))
      (setq flist (car drop-funs))
      (and (or (eq (cadr flist) t)
	       (= (cadr flist) button))
	   (or (eq (caddr flist) t)
	       (dragdrop-compare-mods (caddr flist) mods))
	   (apply (car flist) `(,event ,object ,@(cdddr flist)))
	   ;; (funcall (car flist) event object)
	   (throw 'dragdrop-drop-is-done t))
      (setq drop-funs (cdr drop-funs))))
  nil)

(defun experimental-dragdrop-drop-log-function (event object &optional message buffer)
  "*{EXPERIMENTAL} Logs any drops into a buffer.
If buffer is nil, it inserts the data into a buffer called after
dragdrop-drop-log-name.
If dragdrop-drop-log is non-nil, this is done automatically for each drop.
The function always returns nil."
  (save-excursion
    (cond ((buffer-live-p buffer)
	   (set-buffer buffer))
	  ((stringp buffer)
	   (set-buffer (get-buffer-create buffer)))
	  ((buffer-live-p dragdrop-drop-log-buffer)
	   (set-buffer dragdrop-drop-log-buffer))
	  (t
	   (setq dragdrop-drop-log-buffer (get-buffer-create dragdrop-drop-log-name))
	   (set-buffer dragdrop-drop-log-buffer)))
    (insert (format "* %s: %s\n"
		    (current-time-string)
		    (if message message "received a drop")))
    (insert (format "  at %d,%d (%d,%d) with button %d and mods %s\n"
		    (event-x event)
		    (event-y event)
		    (event-x-pixel event)
		    (event-y-pixel event)
		    (event-button event)
		    (event-modifiers event)))
    (insert (format "  data is of type %s (%d %s)\n"
	     (cond ((eq (car object) 'dragdrop-URL) "URL")
		   ((eq (car object) 'dragdrop-MIME) "MIME")
		   (t "UNKNOWN"))
	     (length (cdr object))
	     (if (= (length (cdr object)) 1) "element" "elements")))
    (let ((i 1)
	  (data (cdr object)))
      (while (not (eq data ()))
	(insert (format "    Element %d: %S\n"
			i (car data)))
	(setq i (1+ i))
	(setq data (cdr data))))
    (insert "----------\n"))
  nil)

(defun experimental-dragdrop-drop-url-default (event object)
  "*{EXPERIMENTAL} Default handler for dropped URL data.
Finds files and URLs. Returns nil if object does not contain URL data."
  (cond ((eq (car object) 'dragdrop-URL)
	 (let* ((data (cdr object))
		(frame (event-channel event))
		(x pop-up-windows)
		(window (or (event-window event)
			    (frame-selected-window frame)
			    (frame-highest-window frame 0))))
	   (setq pop-up-windows nil)
	   (while (not (eq data ()))
	     (cond ((dragdrop-is-some-url "file" (car data))
		    ;; if it is some file, pop it to a buffer
		    (cond (window
			   (select-window window)))
		    (switch-to-buffer (find-file-noselect
				       (substring (car data) 5))))
		   ;; to-do: open ftp URLs with efs...
		   (t 
		    ;; some other URL, try to fire up some browser for it
		    (if (fboundp 'browse-url)
			(browse-url (car data))
		      (display-message 'error 
			"Can't show URL, no browser selected"))))
	     (undo-boundary)
	     (setq data (cdr data)))
	   (make-frame-visible frame)
	   (setq pop-up-windows x)
	   t))
	(t nil)))

(defun experimental-dragdrop-drop-mime-default (event object)
  "*{EXPERIMENTAL} Default handler for dropped MIME data.
Inserts text into buffer, creates MIME buffers for other types.
Returns nil if object does not contain MIME data."
  (cond ((eq (car object) 'dragdrop-MIME)
	 (let ((ldata (cdr object))
	       (frame (event-channel event))
	       (x pop-up-windows)
	       (data nil))
	   ;; how should this be handled???
	   ;; insert drops of text/* into buffer
	   ;; create new buffer if pointer is outside buffer...
	   ;; but there are many other ways...
	   ;;	
	   ;; first thing: check if it's only text/plain and if the
	   ;; drop happened inside some buffer. if yes insert it into
	   ;; this buffer (hope it is not encoded in some MIME way)
	   ;;
	   ;; Remember: ("text/plain" "dosnotmatter" "somedata")
	   ;; drops are inserted at mouse-point, if inside a buffer
	   (while (not (eq ldata ()))
	     (setq data (car ldata))
	     (if (and (listp data)
		      (= (length data) 3)
		      (listp (car data))
		      (stringp (caar data))
		      (string= (caar data) "text/plain")
		      (event-over-text-area-p event))
		 (let ((window (event-window event)))
		   (and window
			(select-window window))
		   (and (not dragdrop-drop-at-point)
			(mouse-set-point event))
		   (insert (caddr data)))
	       (let ((buf (get-buffer-create "*MIME-Drop data*")))
		 (set-buffer buf)
		 (pop-to-buffer buf nil frame)
		 (or (featurep 'tm-view)
		     (and dragdrop-autoload-tm-view
			  (require 'tm-view)))
		 (cond ((stringp data)
			;; this is some raw MIME stuff
			;; create some buffer and let tm do the job
			;;
			;; this is always the same buffer!!!
			;; change?
			(erase-buffer)
			(insert data)
			(and (featurep 'tm-view)
			     (declare-fboundp (mime/viewer-mode buf))))
		       ((and (listp data)
			     (= (length data) 3))
			;; change the internal content-type representation to the
			;; way tm does it ("content/type" (key . value)*)
			;; but for now list will do the job
			;;
			;; this is always the same buffer!!!
			;; change?
			(erase-buffer)
			(insert (caddr data))
			(and (featurep 'tm-view)
			     ;; this list of (car data) should be done before
			     ;; enqueing the event
			     (declare-fboundp 
			      (mime/viewer-mode buf (car data) (cadr data)))))
		       (t
			(display-message 'error "Wrong drop data")))))
	     (undo-boundary)
	     (setq ldata (cdr ldata)))
	   (make-frame-visible frame)
	   (setq pop-up-windows x))
	 t)
	(t nil)))

(defun dragdrop-is-some-url (method url)
  "Returns true if method equals the start of url.
If method does not end into ':' this is appended before the
compare."
  (cond ((and (stringp url)
	      (stringp method)
	      (> (length url) (length method)))
	 ;; is this ?: check efficient enough?
	 (if (not (string= (substring method -1) ":"))
	     (setq method (concat method ":")))
	 (string= method (substring url 0 (length method))))
	(t nil)))

;;
;; Drag API
;;
(defun experimental-dragdrop-drag (event object)
  "*{EXPERIMENTAL} The generic drag function.
Tries to do the best with object in the selected protocol.
Object must comply to the standart drag'n'drop object 
format."
  (error "Not implemented"))

(defun experimental-dragdrop-drag-region (event begin end)
  "*{EXPERIMENTAL} Drag a region.
This function uses special data types if the low-level
protocol requires it. It does so by calling
dragdrop-drag-pure-text."
  (experimental-dragdrop-drag-pure-text event
			   (buffer-substring-no-properties begin end)))

(defun experimental-dragdrop-drag-pure-text (event text)
  "*{EXPERIMENTAL} Drag text-only data.
Takes care of special low-level protocol data types.
Text must be a list of strings."
  (error "Not implemented"))

(defun experimental-dragdrop-drag-pure-file (event file)
  "*{EXPERIMENTAL} Drag filepath-only data.
Takes care of special low-level protocol data types.
file must be a list of strings."
  (error "Not implemented"))

;;
;; The following ones come from frame.el but the better belong here
;; until changed
;;
(defun cde-start-drag (event type data)
  "Implement the CDE drag operation.
Calls the internal function cde-start-drag-internal to do the actual work."
  (interactive "_eXX")
  (if (featurep 'cde)
      ;; Avoid build-time doc string warning by calling the function
      ;; in the following roundabout way:
      (funcall (intern "cde-start-drag-internal")
	       event type data)
    (error "CDE functionality not compiled in.")))

(defun cde-start-drag-region (event begin end)
  "Implement the CDE drag operation for a region.
Calls the internal function CDE-start-drag-internal to do the actual work.
This always does buffer transfers."
  ;; Oliver Graf <ograf@fga.de>
  (interactive "_er")
  (if (featurep 'cde)
      (funcall (intern "cde-start-drag-internal")
	       event nil (list (buffer-substring-no-properties begin end)))
    (error "CDE functionality not compiled in.")))

;; the OffiX drag stuff will soon move also (perhaps mouse.el)
;; if the drag event is done
(defun offix-start-drag (event data &optional type)
  "Implement the OffiX drag operation.
Calls the internal function offix-start-drag-internal to do the actual work.
If type is not given, DndText is assumed."
  ;; Oliver Graf <ograf@fga.de>
  (interactive "esi")
  (if (featurep 'offix)
      (funcall (intern "offix-start-drag-internal") event data type)
    (error "OffiX functionality not compiled in.")))

(defun offix-start-drag-region (event begin end)
  "Implement the OffiX drag operation for a region.
Calls the internal function offix-start-drag-internal to do the actual work.
This always assumes DndText as type."
  ;; Oliver Graf <ograf@fga.de>
  (interactive "_er")
  (if (featurep 'offix)
      (funcall (intern "offix-start-drag-internal")
	       event (buffer-substring-no-properties begin end))
    (error "OffiX functionality not compiled in.")))

(defun gtk-start-drag (event data &optional type)
  (interactive "esi")
  (if (featurep 'gtk)
      (declare-fboundp (gtk-start-drag-internal event data type))
    (error "GTK functionality not compiled in.")))

(defun gtk-start-drag-region (event begin end)
  (interactive "_er")
  (if (featurep 'gtk)
      (declare-fboundp (gtk-start-drag-internal event (buffer-substring-no-properties begin end) "text/plain"))
    (error "GTK functionality not compiled in.")))

;;; dragdrop.el ends here