Mercurial > hg > xemacs-beta
view lisp/map-ynp.el @ 5127:a9c41067dd88 ben-lisp-object
more cleanups, terminology clarification, lots of doc work
-------------------- ChangeLog entries follow: --------------------
man/ChangeLog addition:
2010-03-05 Ben Wing <ben@xemacs.org>
* internals/internals.texi (Introduction to Allocation):
* internals/internals.texi (Integers and Characters):
* internals/internals.texi (Allocation from Frob Blocks):
* internals/internals.texi (lrecords):
* internals/internals.texi (Low-level allocation):
Rewrite section on allocation of Lisp objects to reflect the new
reality. Remove references to nonexistent XSETINT and XSETCHAR.
modules/ChangeLog addition:
2010-03-05 Ben Wing <ben@xemacs.org>
* postgresql/postgresql.c (allocate_pgconn):
* postgresql/postgresql.c (allocate_pgresult):
* postgresql/postgresql.h (struct Lisp_PGconn):
* postgresql/postgresql.h (struct Lisp_PGresult):
* ldap/eldap.c (allocate_ldap):
* ldap/eldap.h (struct Lisp_LDAP):
Same changes as in src/ dir. See large log there in ChangeLog,
but basically:
ALLOC_LISP_OBJECT -> ALLOC_NORMAL_LISP_OBJECT
LISP_OBJECT_HEADER -> NORMAL_LISP_OBJECT_HEADER
../hlo/src/ChangeLog addition:
2010-03-05 Ben Wing <ben@xemacs.org>
* alloc.c:
* alloc.c (old_alloc_sized_lcrecord):
* alloc.c (very_old_free_lcrecord):
* alloc.c (copy_lisp_object):
* alloc.c (zero_sized_lisp_object):
* alloc.c (zero_nonsized_lisp_object):
* alloc.c (lisp_object_storage_size):
* alloc.c (free_normal_lisp_object):
* alloc.c (FREE_FIXED_TYPE_WHEN_NOT_IN_GC):
* alloc.c (ALLOC_FROB_BLOCK_LISP_OBJECT):
* alloc.c (Fcons):
* alloc.c (noseeum_cons):
* alloc.c (make_float):
* alloc.c (make_bignum):
* alloc.c (make_bignum_bg):
* alloc.c (make_ratio):
* alloc.c (make_ratio_bg):
* alloc.c (make_ratio_rt):
* alloc.c (make_bigfloat):
* alloc.c (make_bigfloat_bf):
* alloc.c (size_vector):
* alloc.c (make_compiled_function):
* alloc.c (Fmake_symbol):
* alloc.c (allocate_extent):
* alloc.c (allocate_event):
* alloc.c (make_key_data):
* alloc.c (make_button_data):
* alloc.c (make_motion_data):
* alloc.c (make_process_data):
* alloc.c (make_timeout_data):
* alloc.c (make_magic_data):
* alloc.c (make_magic_eval_data):
* alloc.c (make_eval_data):
* alloc.c (make_misc_user_data):
* alloc.c (Fmake_marker):
* alloc.c (noseeum_make_marker):
* alloc.c (size_string_direct_data):
* alloc.c (make_uninit_string):
* alloc.c (make_string_nocopy):
* alloc.c (mark_lcrecord_list):
* alloc.c (alloc_managed_lcrecord):
* alloc.c (free_managed_lcrecord):
* alloc.c (sweep_lcrecords_1):
* alloc.c (malloced_storage_size):
* buffer.c (allocate_buffer):
* buffer.c (compute_buffer_usage):
* buffer.c (DEFVAR_BUFFER_LOCAL_1):
* buffer.c (nuke_all_buffer_slots):
* buffer.c (common_init_complex_vars_of_buffer):
* buffer.h (struct buffer_text):
* buffer.h (struct buffer):
* bytecode.c:
* bytecode.c (make_compiled_function_args):
* bytecode.c (size_compiled_function_args):
* bytecode.h (struct compiled_function_args):
* casetab.c (allocate_case_table):
* casetab.h (struct Lisp_Case_Table):
* charset.h (struct Lisp_Charset):
* chartab.c (fill_char_table):
* chartab.c (Fmake_char_table):
* chartab.c (make_char_table_entry):
* chartab.c (copy_char_table_entry):
* chartab.c (Fcopy_char_table):
* chartab.c (put_char_table):
* chartab.h (struct Lisp_Char_Table_Entry):
* chartab.h (struct Lisp_Char_Table):
* console-gtk-impl.h (struct gtk_device):
* console-gtk-impl.h (struct gtk_frame):
* console-impl.h (struct console):
* console-msw-impl.h (struct Lisp_Devmode):
* console-msw-impl.h (struct mswindows_device):
* console-msw-impl.h (struct msprinter_device):
* console-msw-impl.h (struct mswindows_frame):
* console-msw-impl.h (struct mswindows_dialog_id):
* console-stream-impl.h (struct stream_console):
* console-stream.c (stream_init_console):
* console-tty-impl.h (struct tty_console):
* console-tty-impl.h (struct tty_device):
* console-tty.c (allocate_tty_console_struct):
* console-x-impl.h (struct x_device):
* console-x-impl.h (struct x_frame):
* console.c (allocate_console):
* console.c (nuke_all_console_slots):
* console.c (DEFVAR_CONSOLE_LOCAL_1):
* console.c (common_init_complex_vars_of_console):
* data.c (make_weak_list):
* data.c (make_weak_box):
* data.c (make_ephemeron):
* database.c:
* database.c (struct Lisp_Database):
* database.c (allocate_database):
* database.c (finalize_database):
* device-gtk.c (allocate_gtk_device_struct):
* device-impl.h (struct device):
* device-msw.c:
* device-msw.c (mswindows_init_device):
* device-msw.c (msprinter_init_device):
* device-msw.c (finalize_devmode):
* device-msw.c (allocate_devmode):
* device-tty.c (allocate_tty_device_struct):
* device-x.c (allocate_x_device_struct):
* device.c:
* device.c (nuke_all_device_slots):
* device.c (allocate_device):
* dialog-msw.c (handle_question_dialog_box):
* elhash.c:
* elhash.c (struct Lisp_Hash_Table):
* elhash.c (finalize_hash_table):
* elhash.c (make_general_lisp_hash_table):
* elhash.c (Fcopy_hash_table):
* elhash.h (htentry):
* emacs.c (main_1):
* eval.c:
* eval.c (size_multiple_value):
* event-stream.c (finalize_command_builder):
* event-stream.c (allocate_command_builder):
* event-stream.c (free_command_builder):
* event-stream.c (event_stream_generate_wakeup):
* event-stream.c (event_stream_resignal_wakeup):
* event-stream.c (event_stream_disable_wakeup):
* event-stream.c (event_stream_wakeup_pending_p):
* events.h (struct Lisp_Timeout):
* events.h (struct command_builder):
* extents-impl.h:
* extents-impl.h (struct extent_auxiliary):
* extents-impl.h (struct extent_info):
* extents-impl.h (set_extent_no_chase_aux_field):
* extents-impl.h (set_extent_no_chase_normal_field):
* extents.c:
* extents.c (gap_array_marker):
* extents.c (gap_array):
* extents.c (extent_list_marker):
* extents.c (extent_list):
* extents.c (stack_of_extents):
* extents.c (gap_array_make_marker):
* extents.c (extent_list_make_marker):
* extents.c (allocate_extent_list):
* extents.c (SLOT):
* extents.c (mark_extent_auxiliary):
* extents.c (allocate_extent_auxiliary):
* extents.c (attach_extent_auxiliary):
* extents.c (size_gap_array):
* extents.c (finalize_extent_info):
* extents.c (allocate_extent_info):
* extents.c (uninit_buffer_extents):
* extents.c (allocate_soe):
* extents.c (copy_extent):
* extents.c (vars_of_extents):
* extents.h:
* faces.c (allocate_face):
* faces.h (struct Lisp_Face):
* faces.h (struct face_cachel):
* file-coding.c:
* file-coding.c (finalize_coding_system):
* file-coding.c (sizeof_coding_system):
* file-coding.c (Fcopy_coding_system):
* file-coding.h (struct Lisp_Coding_System):
* file-coding.h (MARKED_SLOT):
* fns.c (size_bit_vector):
* font-mgr.c:
* font-mgr.c (finalize_fc_pattern):
* font-mgr.c (print_fc_pattern):
* font-mgr.c (Ffc_pattern_p):
* font-mgr.c (Ffc_pattern_create):
* font-mgr.c (Ffc_name_parse):
* font-mgr.c (Ffc_name_unparse):
* font-mgr.c (Ffc_pattern_duplicate):
* font-mgr.c (Ffc_pattern_add):
* font-mgr.c (Ffc_pattern_del):
* font-mgr.c (Ffc_pattern_get):
* font-mgr.c (fc_config_create_using):
* font-mgr.c (fc_strlist_to_lisp_using):
* font-mgr.c (fontset_to_list):
* font-mgr.c (Ffc_config_p):
* font-mgr.c (Ffc_config_up_to_date):
* font-mgr.c (Ffc_config_build_fonts):
* font-mgr.c (Ffc_config_get_cache):
* font-mgr.c (Ffc_config_get_fonts):
* font-mgr.c (Ffc_config_set_current):
* font-mgr.c (Ffc_config_get_blanks):
* font-mgr.c (Ffc_config_get_rescan_interval):
* font-mgr.c (Ffc_config_set_rescan_interval):
* font-mgr.c (Ffc_config_app_font_add_file):
* font-mgr.c (Ffc_config_app_font_add_dir):
* font-mgr.c (Ffc_config_app_font_clear):
* font-mgr.c (size):
* font-mgr.c (Ffc_config_substitute):
* font-mgr.c (Ffc_font_render_prepare):
* font-mgr.c (Ffc_font_match):
* font-mgr.c (Ffc_font_sort):
* font-mgr.c (finalize_fc_config):
* font-mgr.c (print_fc_config):
* font-mgr.h:
* font-mgr.h (struct fc_pattern):
* font-mgr.h (XFC_PATTERN):
* font-mgr.h (struct fc_config):
* font-mgr.h (XFC_CONFIG):
* frame-gtk.c (allocate_gtk_frame_struct):
* frame-impl.h (struct frame):
* frame-msw.c (mswindows_init_frame_1):
* frame-x.c (allocate_x_frame_struct):
* frame.c (nuke_all_frame_slots):
* frame.c (allocate_frame_core):
* gc.c:
* gc.c (GC_CHECK_NOT_FREE):
* glyphs.c (finalize_image_instance):
* glyphs.c (allocate_image_instance):
* glyphs.c (Fcolorize_image_instance):
* glyphs.c (allocate_glyph):
* glyphs.c (unmap_subwindow_instance_cache_mapper):
* glyphs.c (register_ignored_expose):
* glyphs.h (struct Lisp_Image_Instance):
* glyphs.h (struct Lisp_Glyph):
* glyphs.h (struct glyph_cachel):
* glyphs.h (struct expose_ignore):
* gui.c (allocate_gui_item):
* gui.h (struct Lisp_Gui_Item):
* keymap.c (struct Lisp_Keymap):
* keymap.c (make_keymap):
* lisp.h:
* lisp.h (struct Lisp_String_Direct_Data):
* lisp.h (struct Lisp_String_Indirect_Data):
* lisp.h (struct Lisp_Vector):
* lisp.h (struct Lisp_Bit_Vector):
* lisp.h (DECLARE_INLINE_LISP_BIT_VECTOR):
* lisp.h (struct weak_box):
* lisp.h (struct ephemeron):
* lisp.h (struct weak_list):
* lrecord.h:
* lrecord.h (struct lrecord_implementation):
* lrecord.h (MC_ALLOC_CALL_FINALIZER):
* lrecord.h (struct lcrecord_list):
* lstream.c (finalize_lstream):
* lstream.c (sizeof_lstream):
* lstream.c (Lstream_new):
* lstream.c (Lstream_delete):
* lstream.h (struct lstream):
* marker.c:
* marker.c (finalize_marker):
* marker.c (compute_buffer_marker_usage):
* mule-charset.c:
* mule-charset.c (make_charset):
* mule-charset.c (compute_charset_usage):
* objects-impl.h (struct Lisp_Color_Instance):
* objects-impl.h (struct Lisp_Font_Instance):
* objects-tty-impl.h (struct tty_color_instance_data):
* objects-tty-impl.h (struct tty_font_instance_data):
* objects-tty.c (tty_initialize_color_instance):
* objects-tty.c (tty_initialize_font_instance):
* objects.c (finalize_color_instance):
* objects.c (Fmake_color_instance):
* objects.c (finalize_font_instance):
* objects.c (Fmake_font_instance):
* objects.c (reinit_vars_of_objects):
* opaque.c:
* opaque.c (sizeof_opaque):
* opaque.c (make_opaque_ptr):
* opaque.c (free_opaque_ptr):
* opaque.h:
* opaque.h (Lisp_Opaque):
* opaque.h (Lisp_Opaque_Ptr):
* print.c (printing_unreadable_lcrecord):
* print.c (external_object_printer):
* print.c (debug_p4):
* process.c (finalize_process):
* process.c (make_process_internal):
* procimpl.h (struct Lisp_Process):
* rangetab.c (Fmake_range_table):
* rangetab.c (Fcopy_range_table):
* rangetab.h (struct Lisp_Range_Table):
* scrollbar.c:
* scrollbar.c (create_scrollbar_instance):
* scrollbar.c (compute_scrollbar_instance_usage):
* scrollbar.h (struct scrollbar_instance):
* specifier.c (finalize_specifier):
* specifier.c (sizeof_specifier):
* specifier.c (set_specifier_caching):
* specifier.h (struct Lisp_Specifier):
* specifier.h (struct specifier_caching):
* symeval.h:
* symeval.h (SYMBOL_VALUE_MAGIC_P):
* symeval.h (DEFVAR_SYMVAL_FWD):
* symsinit.h:
* syntax.c (init_buffer_syntax_cache):
* syntax.h (struct syntax_cache):
* toolbar.c:
* toolbar.c (allocate_toolbar_button):
* toolbar.c (update_toolbar_button):
* toolbar.h (struct toolbar_button):
* tooltalk.c (struct Lisp_Tooltalk_Message):
* tooltalk.c (make_tooltalk_message):
* tooltalk.c (struct Lisp_Tooltalk_Pattern):
* tooltalk.c (make_tooltalk_pattern):
* ui-gtk.c:
* ui-gtk.c (allocate_ffi_data):
* ui-gtk.c (emacs_gtk_object_finalizer):
* ui-gtk.c (allocate_emacs_gtk_object_data):
* ui-gtk.c (allocate_emacs_gtk_boxed_data):
* ui-gtk.h:
* window-impl.h (struct window):
* window-impl.h (struct window_mirror):
* window.c (finalize_window):
* window.c (allocate_window):
* window.c (new_window_mirror):
* window.c (mark_window_as_deleted):
* window.c (make_dummy_parent):
* window.c (compute_window_mirror_usage):
* window.c (compute_window_usage):
Overall point of this change and previous ones in this repository:
(1) Introduce new, clearer terminology: everything other than int
or char is a "record" object, which comes in two types: "normal
objects" and "frob-block objects". Fix up all places that
referred to frob-block objects as "simple", "basic", etc.
(2) Provide an advertised interface for doing operations on Lisp
objects, including creating new types, that is clean and
consistent in its naming, uses the above-referenced terms and
avoids referencing "lrecords", "old lcrecords", etc., which should
hide under the surface.
(3) Make the size_in_bytes and finalizer methods take a
Lisp_Object rather than a void * for consistency with other methods.
(4) Separate finalizer method into finalizer and disksaver, so
that normal finalize methods don't have to worry about disksaving.
Other specifics:
(1) Renaming:
LISP_OBJECT_HEADER -> NORMAL_LISP_OBJECT_HEADER
ALLOC_LISP_OBJECT -> ALLOC_NORMAL_LISP_OBJECT
implementation->basic_p -> implementation->frob_block_p
ALLOCATE_FIXED_TYPE_AND_SET_IMPL -> ALLOC_FROB_BLOCK_LISP_OBJECT
*FCCONFIG*, wrap_fcconfig -> *FC_CONFIG*, wrap_fc_config
*FCPATTERN*, wrap_fcpattern -> *FC_PATTERN*, wrap_fc_pattern
(the last two changes make the naming of these macros consistent
with the naming of all other macros, since the objects are named
fc-config and fc-pattern with a hyphen)
(2) Lots of documentation fixes in lrecord.h.
(3) Eliminate macros for copying, freeing, zeroing objects, getting
their storage size. Instead, new functions:
zero_sized_lisp_object()
zero_nonsized_lisp_object()
lisp_object_storage_size()
free_normal_lisp_object()
(copy_lisp_object() already exists)
LISP_OBJECT_FROB_BLOCK_P() (actually a macro)
Eliminated:
free_lrecord()
zero_lrecord()
copy_lrecord()
copy_sized_lrecord()
old_copy_lcrecord()
old_copy_sized_lcrecord()
old_zero_lcrecord()
old_zero_sized_lcrecord()
LISP_OBJECT_STORAGE_SIZE()
COPY_SIZED_LISP_OBJECT()
COPY_SIZED_LCRECORD()
COPY_LISP_OBJECT()
ZERO_LISP_OBJECT()
FREE_LISP_OBJECT()
(4) Catch the remaining places where lrecord stuff was used directly
and use the advertised interface, e.g. alloc_sized_lrecord() ->
ALLOC_SIZED_LISP_OBJECT().
(5) Make certain statically-declared pseudo-objects
(buffer_local_flags, console_local_flags) have their lheader
initialized correctly, so things like copy_lisp_object() can work
on them. Make extent_auxiliary_defaults a proper heap object
Vextent_auxiliary_defaults, and make extent auxiliaries dumpable
so that this object can be dumped. allocate_extent_auxiliary()
now just creates the object, and attach_extent_auxiliary()
creates an extent auxiliary and attaches to an extent, like the
old allocate_extent_auxiliary().
(6) Create EXTENT_AUXILIARY_SLOTS macro, similar to the foo-slots.h
files but in a macro instead of a file. The purpose is to avoid
duplication when iterating over all the slots in an extent auxiliary.
Use it.
(7) In lstream.c, don't zero out object after allocation because
allocation routines take care of this.
(8) In marker.c, fix a mistake in computing marker overhead.
(9) In print.c, clean up printing_unreadable_lcrecord(),
external_object_printer() to avoid lots of ifdef NEW_GC's.
(10) Separate toolbar-button allocation into a separate
allocate_toolbar_button() function for use in the example code
in lrecord.h.
author | Ben Wing <ben@xemacs.org> |
---|---|
date | Fri, 05 Mar 2010 04:08:17 -0600 |
parents | e29fcfd8df5f |
children | 308d34e9f07d |
line wrap: on
line source
;;; map-ynp.el --- General-purpose boolean question-asker. ;; Copyright (C) 1991-1995, 1997 Free Software Foundation, Inc. ;; Author: Roland McGrath <roland@gnu.ai.mit.edu> ;; Keywords: lisp, extensions, dumped ;; This file is part of XEmacs. ;; XEmacs is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; XEmacs is distributed in the hope that it will be useful, but ;; WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ;; General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with XEmacs; see the file COPYING. If not, write to the Free ;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ;; 02111-1307, USA. ;;; Synched up with: Emacs/Mule zeta. ;;; Commentary: ;; This file is dumped with XEmacs. ;; map-y-or-n-p is a general-purpose question-asking function. ;; It asks a series of y/n questions (a la y-or-n-p), and decides to ;; apply an action to each element of a list based on the answer. ;; The nice thing is that you also get some other possible answers ;; to use, reminiscent of query-replace: ! to answer y to all remaining ;; questions; ESC or q to answer n to all remaining questions; . to answer ;; y once and then n for the remainder; and you can get help with C-h. ;;; Code: (defun map-y-or-n-p (prompter actor list &optional help action-alist no-cursor-in-echo-area) "Ask a series of boolean questions. Takes args PROMPTER ACTOR LIST, and optional args HELP and ACTION-ALIST. LIST is a list of objects, or a function of no arguments to return the next object or nil. If PROMPTER is a string, the prompt is \(format PROMPTER OBJECT\). If not a string, PROMPTER is a function of one arg (an object from LIST), which returns a string to be used as the prompt for that object. If the return value is not a string, it may be nil to ignore the object or non-nil to act on the object without asking the user. ACTOR is a function of one arg (an object from LIST), which gets called with each object that the user answers `yes' for. If HELP is given, it is a list (OBJECT OBJECTS ACTION), where OBJECT is a string giving the singular noun for an elt of LIST; OBJECTS is the plural noun for elts of LIST, and ACTION is a transitive verb describing ACTOR. The default is \(\"object\" \"objects\" \"act on\"\). At the prompts, the user may enter y, Y, or SPC to act on that object; n, N, or DEL to skip that object; ! to act on all following objects; ESC or q to exit (skip all following objects); . (period) to act on the current object and then exit; or \\[help-command] to get help. If ACTION-ALIST is given, it is an alist (KEY FUNCTION HELP) of extra keys that will be accepted. KEY is a character; FUNCTION is a function of one arg (an object from LIST); HELP is a string. When the user hits KEY, FUNCTION is called. If it returns non-nil, the object is considered \"acted upon\", and the next object from LIST is processed. If it returns nil, the prompt is repeated for the same object. Final optional argument NO-CURSOR-IN-ECHO-AREA non-nil says not to set `cursor-in-echo-area' while prompting. This function uses `query-replace-map' to define the standard responses, but not all of the responses which `query-replace' understands are meaningful here. Returns the number of actions taken." (let* ((actions 0) user-keys mouse-event map prompt char elt def ;; Non-nil means we should use mouse menus to ask. ;; use-menus ;;delayed-switch-frame (next (if (or (and list (symbolp list)) (subrp list) (compiled-function-p list) (and (consp list) (eq (car list) 'lambda))) #'(lambda () (setq elt (funcall list))) #'(lambda () (if list (progn (setq elt (car list) list (cdr list)) t) nil))))) (if (should-use-dialog-box-p) ;; Make a list describing a dialog box. (let (;; (object (capitalize (or (nth 0 help) "object"))) ;; (objects (capitalize (or (nth 1 help) "objects"))) ;; (action (capitalize (or (nth 2 help) "act on"))) ) (setq map `(("%_Yes" . act) ("%_No" . skip) ; bogus crap. --ben ; ((, (if help ; (capitalize ; (or (nth 3 help) ; (concat action " All " objects))) ; "Do All")) . automatic) ; ((, (if help ; (capitalize ; (or (nth 4 help) ; (concat action " " object " And Quit"))) ; "Do it and Quit")) . act-and-exit) ; ((, (capitalize ; (or (and help (nth 5 help)) "Quit"))) ; . exit) ("Yes %_All" . automatic) ("No A%_ll" . exit) ("%_Cancel" . quit) ,@(mapcar #'(lambda (elt) (cons (capitalize (nth 2 elt)) (vector (nth 1 elt)))) action-alist)) mouse-event last-command-event)) (setq user-keys (if action-alist (concat (mapconcat #'(lambda (elt) (key-description (if (characterp (car elt)) ;; XEmacs (char-to-string (car elt)) (car elt)))) action-alist ", ") " ") "") ;; Make a map that defines each user key as a vector containing ;; its definition. ;; XEmacs map (let ((foomap (make-sparse-keymap))) (mapc #'(lambda (elt) (define-key foomap (if (characterp (car elt)) (char-to-string (car elt)) (car elt)) (vector (nth 1 elt)))) action-alist) (set-keymap-parents foomap (list query-replace-map)) foomap))) (unwind-protect (progn (if (stringp prompter) (setq prompter `(lambda (object) (format ,prompter object)))) (while (funcall next) (setq prompt (funcall prompter elt)) (cond ((stringp prompt) ;; Prompt the user about this object. (setq quit-flag nil) (if mouse-event ; XEmacs (setq def (or (and-fboundp #'get-dialog-box-response (get-dialog-box-response mouse-event (cons prompt map))) 'quit)) ;; Prompt in the echo area. (let ((cursor-in-echo-area (not no-cursor-in-echo-area))) (display-message 'prompt (format "%s(y, n, !, ., q, %sor %s) " prompt user-keys (key-description (vector help-char)))) (setq char (next-command-event)) ;; Show the answer to the question. (display-message 'prompt (format "%s(y, n, !, ., q, %sor %s) %s" prompt user-keys (key-description (vector help-char)) (single-key-description char)))) (setq def (lookup-key map (vector char)))) (cond ((eq def 'exit) (setq next #'(lambda () nil))) ((eq def 'act) ;; Act on the object. (funcall actor elt) (setq actions (1+ actions))) ((eq def 'skip) ;; Skip the object. ) ((eq def 'act-and-exit) ;; Act on the object and then exit. (funcall actor elt) (setq actions (1+ actions) next (function (lambda () nil)))) ((or (eq def 'quit) (eq def 'exit-prefix)) (setq quit-flag t) (setq next `(lambda () (setq next ',next) ',elt))) ((eq def 'automatic) ;; Act on this and all following objects. ;; (if (funcall prompter elt) ; Emacs (if (eval (funcall prompter elt)) (progn (funcall actor elt) (setq actions (1+ actions)))) (while (funcall next) ;; (funcall prompter elt) ; Emacs (if (eval (funcall prompter elt)) (progn (funcall actor elt) (setq actions (1+ actions)))))) ((eq def 'help) (with-output-to-temp-buffer "*Help*" (princ (let ((object (if help (nth 0 help) "object")) (objects (if help (nth 1 help) "objects")) (action (if help (nth 2 help) "act on"))) (concat (format "Type SPC or `y' to %s the current %s; DEL or `n' to skip the current %s; ! to %s all remaining %s; ESC or `q' to exit;\n" action object object action objects) (mapconcat (function (lambda (elt) (format "%c to %s" (nth 0 elt) (downcase (normalize-menu-text (nth 2 elt)))))) action-alist ";\n") (if action-alist ";\n") (format "or . (period) to %s \ the current %s and exit." action object)))) (save-excursion (set-buffer standard-output) (help-mode))) (setq next `(lambda () (setq next ',next) ',elt))) ((vectorp def) ;; A user-defined key. (if (funcall (aref def 0) elt) ;Call its function. ;; The function has eaten this object. (setq actions (1+ actions)) ;; Regurgitated; try again. (setq next `(lambda () (setq next ',next) ',elt)))) ;((and (consp char) ; Emacs ; (eq (car char) 'switch-frame)) ; ;; switch-frame event. Put it off until we're done. ; (setq delayed-switch-frame char) ; (setq next `(lambda () ; (setq next ',next) ; ',elt))) (t ;; Random char. (message "Type %s for help." (key-description (vector help-char))) (beep) (sit-for 1) (setq next `(lambda () (setq next ',next) ',elt))))) ((eval prompt) (progn (funcall actor elt) (setq actions (1+ actions))))))) ;;(if delayed-switch-frame ;; (setq unread-command-events ;; (cons delayed-switch-frame unread-command-events)))) ;; ((eval prompt) ;; (progn ;; (funcall actor elt) ;; (setq actions (1+ actions))))) ) ;; Clear the last prompt from the minibuffer. (clear-message 'prompt) ;; Return the number of actions that were taken. actions)) ;;; map-ynp.el ends here