@c -*-texinfo-*-
@c This is part of the XEmacs Lisp Reference Manual.
@c Copyright (C) 1996 Ben Wing.
@c See the file lispref.texi for copying conditions.
@setfilename ../../info/internationalization.info
@node MULE, Tips, Internationalization, top
@chapter MULE

@dfn{MULE} is the name originally given to the version of GNU Emacs
extended for multi-lingual (and in particular Asian-language) support.
``MULE'' is short for ``MUlti-Lingual Emacs''.  It was originally called
Nemacs (``Nihon Emacs'' where ``Nihon'' is the Japanese word for
``Japan''), when it only provided support for Japanese.  XEmacs
refers to its multi-lingual support as @dfn{MULE support} since it
is based on @dfn{MULE}.

@menu
* Internationalization Terminology::
                        Definition of various internationalization terms.
* Charsets::            Sets of related characters.
* MULE Characters::     Working with characters in XEmacs/MULE.
* Composite Characters:: Making new characters by overstriking other ones.
* ISO 2022::            An international standard for charsets and encodings.
* Coding Systems::      Ways of representing a string of chars using integers.
* CCL::                 A special language for writing fast converters.
* Category Tables::     Subdividing charsets into groups.
@end menu

@node Internationalization Terminology
@section Internationalization Terminology

   In internationalization terminology, a string of text is divided up
into @dfn{characters}, which are the printable units that make up the
text.  A single character is (for example) a capital @samp{A}, the
number @samp{2}, a Katakana character, a Kanji ideograph (an
@dfn{ideograph} is a ``picture'' character, such as is used in Japanese
Kanji, Chinese Hanzi, and Korean Hangul; typically there are thousands
of such ideographs in each language), etc.  The basic property of a
character is its shape.  Note that the same character may be drawn by
two different people (or in two different fonts) in slightly different
ways, although the basic shape will be the same.

  In some cases, the differences will be significant enough that it is
actually possible to identify two or more distinct shapes that both
represent the same character.  For example, the lowercase letters
@samp{a} and @samp{g} each have two distinct possible shapes---the
@samp{a} can optionally have a curved tail projecting off the top, and
the @samp{g} can be formed either of two loops, or of one loop and a
tail hanging off the bottom.  Such distinct possible shapes of a
character are called @dfn{glyphs}.  The important characteristic of two
glyphs making up the same character is that the choice between one or
the other is purely stylistic and has no linguistic effect on a word
(this is the reason why a capital @samp{A} and lowercase @samp{a}
are different characters rather than different glyphs---e.g.
@samp{Aspen} is a city while @samp{aspen} is a kind of tree).

  Note that @dfn{character} and @dfn{glyph} are used differently
here than elsewhere in XEmacs.

  A @dfn{character set} is simply a set of related characters.  ASCII,
for example, is a set of 94 characters (or 128, if you count
non-printing characters).  Other character sets are ISO8859-1 (ASCII
plus various accented characters and other international symbols),
JISX0201 (ASCII, more or less, plus half-width Katakana), JISX0208
(Japanese Kanji), JISX0212 (a second set of less-used Japanese Kanji),
GB2312 (Mainland Chinese Hanzi), etc.

  Every character set has one or more @dfn{orderings}, which can be
viewed as a way of assigning a number (or set of numbers) to each
character in the set.  For most character sets, there is a standard
ordering, and in fact all of the character sets mentioned above define a
particular ordering.  ASCII, for example, places letters in their
``natural'' order, puts uppercase letters before lowercase letters,
numbers before letters, etc.  Note that for many of the Asian character
sets, there is no natural ordering of the characters.  The actual
orderings are based on one or more salient characteristic, of which
there are many to choose from---e.g. number of strokes, common
radicals, phonetic ordering, etc.

  The set of numbers assigned to any particular character are called
the character's @dfn{position codes}.  The number of position codes
required to index a particular character in a character set is called
the @dfn{dimension} of the character set.  ASCII, being a relatively
small character set, is of dimension one, and each character in the
set is indexed using a single position code, in the range 0 through
127 (if non-printing characters are included) or 33 through 126
(if only the printing characters are considered).  JISX0208, i.e.
Japanese Kanji, has thousands of characters, and is of dimension two --
every character is indexed by two position codes, each in the range
33 through 126. (Note that the choice of the range here is somewhat
arbitrary.  Although a character set such as JISX0208 defines an
@emph{ordering} of all its characters, it does not define the actual
mapping between numbers and characters.  You could just as easily
index the characters in JISX0208 using numbers in the range 0 through
93, 1 through 94, 2 through 95, etc.  The reason for the actual range
chosen is so that the position codes match up with the actual values
used in the common encodings.)

  An @dfn{encoding} is a way of numerically representing characters from
one or more character sets into a stream of like-sized numerical values
called @dfn{words}; typically these are 8-bit, 16-bit, or 32-bit
quantities.  If an encoding encompasses only one character set, then the
position codes for the characters in that character set could be used
directly. (This is the case with ASCII, and as a result, most people do
not understand the difference between a character set and an encoding.)
This is not possible, however, if more than one character set is to be
used in the encoding.  For example, printed Japanese text typically
requires characters from multiple character sets---ASCII, JISX0208, and
JISX0212, to be specific.  Each of these is indexed using one or more
position codes in the range 33 through 126, so the position codes could
not be used directly or there would be no way to tell which character
was meant.  Different Japanese encodings handle this differently---JIS
uses special escape characters to denote different character sets; EUC
sets the high bit of the position codes for JISX0208 and JISX0212, and
puts a special extra byte before each JISX0212 character; etc. (JIS,
EUC, and most of the other encodings you will encounter are 7-bit or
8-bit encodings.  There is one common 16-bit encoding, which is Unicode;
this strives to represent all the world's characters in a single large
character set.  32-bit encodings are generally used internally in
programs to simplify the code that manipulates them; however, they are
not much used externally because they are not very space-efficient.)

  Encodings are classified as either @dfn{modal} or @dfn{non-modal}.  In
a @dfn{modal encoding}, there are multiple states that the encoding can be in,
and the interpretation of the values in the stream depends on the
current global state of the encoding.  Special values in the encoding,
called @dfn{escape sequences}, are used to change the global state.
JIS, for example, is a modal encoding.  The bytes @samp{ESC $ B}
indicate that, from then on, bytes are to be interpreted as position
codes for JISX0208, rather than as ASCII.  This effect is cancelled
using the bytes @samp{ESC ( B}, which mean ``switch from whatever the
current state is to ASCII''.  To switch to JISX0212, the escape sequence
@samp{ESC $ ( D}. (Note that here, as is common, the escape sequences do
in fact begin with @samp{ESC}.  This is not necessarily the case,
however.)

A @dfn{non-modal encoding} has no global state that extends past the
character currently being interpreted.  EUC, for example, is a
non-modal encoding.  Characters in JISX0208 are encoded by setting
the high bit of the position codes, and characters in JISX0212 are
encoded by doing the same but also prefixing the character with the
byte 0x8F.

  The advantage of a modal encoding is that it is generally more
space-efficient, and is easily extendable because there are essentially
an arbitrary number of escape sequences that can be created.  The
disadvantage, however, is that it is much more difficult to work with
if it is not being processed in a sequential manner.  In the non-modal
EUC encoding, for example, the byte 0x41 always refers to the letter
@samp{A}; whereas in JIS, it could either be the letter @samp{A}, or
one of the two position codes in a JISX0208 character, or one of the
two position codes in a JISX0212 character.  Determining exactly which
one is meant could be difficult and time-consuming if the previous
bytes in the string have not already been processed.

  Non-modal encodings are further divided into @dfn{fixed-width} and
@dfn{variable-width} formats.  A fixed-width encoding always uses
the same number of words per character, whereas a variable-width
encoding does not.  EUC is a good example of a variable-width
encoding: one to three bytes are used per character, depending on
the character set.  16-bit and 32-bit encodings are nearly always
fixed-width, and this is in fact one of the main reasons for using
an encoding with a larger word size.  The advantages of fixed-width
encodings should be obvious.  The advantages of variable-width
encodings are that they are generally more space-efficient and allow
for compatibility with existing 8-bit encodings such as ASCII.

  Note that the bytes in an 8-bit encoding are often referred to
as @dfn{octets} rather than simply as bytes.  This terminology
dates back to the days before 8-bit bytes were universal, when
some computers had 9-bit bytes, others had 10-bit bytes, etc.

@node Charsets
@section Charsets

  A @dfn{charset} in MULE is an object that encapsulates a
particular character set as well as an ordering of those characters.
Charsets are permanent objects and are named using symbols, like
faces.

@defun charsetp object
This function returns non-@code{nil} if @var{object} is a charset.
@end defun

@menu
* Charset Properties::          Properties of a charset.
* Basic Charset Functions::     Functions for working with charsets.
* Charset Property Functions::  Functions for accessing charset properties.
* Predefined Charsets::         Predefined charset objects.
@end menu

@node Charset Properties
@subsection Charset Properties

  Charsets have the following properties:

@table @code
@item name
A symbol naming the charset.  Every charset must have a different name;
this allows a charset to be referred to using its name rather than
the actual charset object.
@item doc-string
A documentation string describing the charset.
@item registry
A regular expression matching the font registry field for this character
set.  For example, both the @code{ascii} and @code{latin-iso8859-1}
charsets use the registry @code{"ISO8859-1"}.  This field is used to
choose an appropriate font when the user gives a general font
specification such as @samp{-*-courier-medium-r-*-140-*}, i.e. a
14-point upright medium-weight Courier font.
@item dimension
Number of position codes used to index a character in the character set.
XEmacs/MULE can only handle character sets of dimension 1 or 2.
This property defaults to 1.
@item chars
Number of characters in each dimension.  In XEmacs/MULE, the only
allowed values are 94 or 96. (There are a couple of pre-defined
character sets, such as ASCII, that do not follow this, but you cannot
define new ones like this.) Defaults to 94.  Note that if the dimension
is 2, the character set thus described is 94x94 or 96x96.
@item columns
Number of columns used to display a character in this charset.
Only used in TTY mode. (Under X, the actual width of a character
can be derived from the font used to display the characters.)
If unspecified, defaults to the dimension. (This is almost
always the correct value, because character sets with dimension 2
are usually ideograph character sets, which need two columns to
display the intricate ideographs.)
@item direction
A symbol, either @code{l2r} (left-to-right) or @code{r2l}
(right-to-left).  Defaults to @code{l2r}.  This specifies the
direction that the text should be displayed in, and will be
left-to-right for most charsets but right-to-left for Hebrew
and Arabic. (Right-to-left display is not currently implemented.)
@item final
Final byte of the standard ISO 2022 escape sequence designating this
charset.  Must be supplied.  Each combination of (@var{dimension},
@var{chars}) defines a separate namespace for final bytes, and each
charset within a particular namespace must have a different final byte.
Note that ISO 2022 restricts the final byte to the range 0x30 - 0x7E if
dimension == 1, and 0x30 - 0x5F if dimension == 2.  Note also that final
bytes in the range 0x30 - 0x3F are reserved for user-defined (not
official) character sets.  For more information on ISO 2022, see @ref{Coding
Systems}.
@item graphic
0 (use left half of font on output) or 1 (use right half of font on
output).  Defaults to 0.  This specifies how to convert the position
codes that index a character in a character set into an index into the
font used to display the character set.  With @code{graphic} set to 0,
position codes 33 through 126 map to font indices 33 through 126; with
it set to 1, position codes 33 through 126 map to font indices 161
through 254 (i.e. the same number but with the high bit set).  For
example, for a font whose registry is ISO8859-1, the left half of the
font (octets 0x20 - 0x7F) is the @code{ascii} charset, while the right
half (octets 0xA0 - 0xFF) is the @code{latin-iso8859-1} charset.
@item ccl-program
A compiled CCL program used to convert a character in this charset into
an index into the font.  This is in addition to the @code{graphic}
property.  If a CCL program is defined, the position codes of a
character will first be processed according to @code{graphic} and
then passed through the CCL program, with the resulting values used
to index the font.

This is used, for example, in the Big5 character set (used in Taiwan).
This character set is not ISO-2022-compliant, and its size (94x157) does
not fit within the maximum 96x96 size of ISO-2022-compliant character
sets.  As a result, XEmacs/MULE splits it (in a rather complex fashion,
so as to group the most commonly used characters together) into two
charset objects (@code{big5-1} and @code{big5-2}), each of size 94x94,
and each charset object uses a CCL program to convert the modified
position codes back into standard Big5 indices to retrieve a character
from a Big5 font.
@end table

Most of the above properties can only be changed when the charset
is created.  @xref{Charset Property Functions}.

@node Basic Charset Functions
@subsection Basic Charset Functions

@defun find-charset charset-or-name
This function retrieves the charset of the given name.  If
@var{charset-or-name} is a charset object, it is simply returned.
Otherwise, @var{charset-or-name} should be a symbol.  If there is no
such charset, @code{nil} is returned.  Otherwise the associated charset
object is returned.
@end defun

@defun get-charset name
This function retrieves the charset of the given name.  Same as
@code{find-charset} except an error is signalled if there is no such
charset instead of returning @code{nil}.
@end defun

@defun charset-list
This function returns a list of the names of all defined charsets.
@end defun

@defun make-charset name doc-string props
This function defines a new character set.  This function is for use
with Mule support.  @var{name} is a symbol, the name by which the
character set is normally referred.  @var{doc-string} is a string
describing the character set.  @var{props} is a property list,
describing the specific nature of the character set.  The recognized
properties are @code{registry}, @code{dimension}, @code{columns},
@code{chars}, @code{final}, @code{graphic}, @code{direction}, and
@code{ccl-program}, as previously described.
@end defun

@defun make-reverse-direction-charset charset new-name
This function makes a charset equivalent to @var{charset} but which goes
in the opposite direction.  @var{new-name} is the name of the new
charset.  The new charset is returned.
@end defun

@defun charset-from-attributes dimension chars final &optional direction
This function returns a charset with the given @var{dimension},
@var{chars}, @var{final}, and @var{direction}.  If @var{direction} is
omitted, both directions will be checked (left-to-right will be returned
if character sets exist for both directions).
@end defun

@defun charset-reverse-direction-charset charset
This function returns the charset (if any) with the same dimension,
number of characters, and final byte as @var{charset}, but which is
displayed in the opposite direction.
@end defun

@node Charset Property Functions
@subsection Charset Property Functions

All of these functions accept either a charset name or charset object.

@defun charset-property charset prop
This function returns property @var{prop} of @var{charset}.
@xref{Charset Properties}.
@end defun

Convenience functions are also provided for retrieving individual
properties of a charset.

@defun charset-name charset
This function returns the name of @var{charset}.  This will be a symbol.
@end defun

@defun charset-doc-string charset
This function returns the doc string of @var{charset}.
@end defun

@defun charset-registry charset
This function returns the registry of @var{charset}.
@end defun

@defun charset-dimension charset
This function returns the dimension of @var{charset}.
@end defun

@defun charset-chars charset
This function returns the number of characters per dimension of
@var{charset}.
@end defun

@defun charset-columns charset
This function returns the number of display columns per character (in
TTY mode) of @var{charset}.
@end defun

@defun charset-direction charset
This function returns the display direction of @var{charset}---either
@code{l2r} or @code{r2l}.
@end defun

@defun charset-final charset
This function returns the final byte of the ISO 2022 escape sequence
designating @var{charset}.
@end defun

@defun charset-graphic charset
This function returns either 0 or 1, depending on whether the position
codes of characters in @var{charset} map to the left or right half
of their font, respectively.
@end defun

@defun charset-ccl-program charset
This function returns the CCL program, if any, for converting
position codes of characters in @var{charset} into font indices.
@end defun

The only property of a charset that can currently be set after
the charset has been created is the CCL program.

@defun set-charset-ccl-program charset ccl-program
This function sets the @code{ccl-program} property of @var{charset} to
@var{ccl-program}.
@end defun

@node Predefined Charsets
@subsection Predefined Charsets

The following charsets are predefined in the C code.

@example
Name                    Type  Fi Gr Dir Registry
--------------------------------------------------------------
ascii                    94    B  0  l2r ISO8859-1
control-1                94       0  l2r ---
latin-iso8859-1          94    A  1  l2r ISO8859-1
latin-iso8859-2          96    B  1  l2r ISO8859-2
latin-iso8859-3          96    C  1  l2r ISO8859-3
latin-iso8859-4          96    D  1  l2r ISO8859-4
cyrillic-iso8859-5       96    L  1  l2r ISO8859-5
arabic-iso8859-6         96    G  1  r2l ISO8859-6
greek-iso8859-7          96    F  1  l2r ISO8859-7
hebrew-iso8859-8         96    H  1  r2l ISO8859-8
latin-iso8859-9          96    M  1  l2r ISO8859-9
thai-tis620              96    T  1  l2r TIS620
katakana-jisx0201        94    I  1  l2r JISX0201.1976
latin-jisx0201           94    J  0  l2r JISX0201.1976
japanese-jisx0208-1978   94x94 @@  0  l2r JISX0208.1978
japanese-jisx0208        94x94 B  0  l2r JISX0208.19(83|90)
japanese-jisx0212        94x94 D  0  l2r JISX0212
chinese-gb2312           94x94 A  0  l2r GB2312
chinese-cns11643-1       94x94 G  0  l2r CNS11643.1
chinese-cns11643-2       94x94 H  0  l2r CNS11643.2
chinese-big5-1           94x94 0  0  l2r Big5
chinese-big5-2           94x94 1  0  l2r Big5
korean-ksc5601           94x94 C  0  l2r KSC5601
composite                96x96    0  l2r ---
@end example

The following charsets are predefined in the Lisp code.

@example
Name                     Type  Fi Gr Dir Registry
--------------------------------------------------------------
arabic-digit             94    2  0  l2r MuleArabic-0
arabic-1-column          94    3  0  r2l MuleArabic-1
arabic-2-column          94    4  0  r2l MuleArabic-2
sisheng                  94    0  0  l2r sisheng_cwnn\|OMRON_UDC_ZH
chinese-cns11643-3       94x94 I  0  l2r CNS11643.1
chinese-cns11643-4       94x94 J  0  l2r CNS11643.1
chinese-cns11643-5       94x94 K  0  l2r CNS11643.1
chinese-cns11643-6       94x94 L  0  l2r CNS11643.1
chinese-cns11643-7       94x94 M  0  l2r CNS11643.1
ethiopic                 94x94 2  0  l2r Ethio
ascii-r2l                94    B  0  r2l ISO8859-1
ipa                      96    0  1  l2r MuleIPA
vietnamese-lower         96    1  1  l2r VISCII1.1
vietnamese-upper         96    2  1  l2r VISCII1.1
@end example

For all of the above charsets, the dimension and number of columns are
the same.

Note that ASCII, Control-1, and Composite are handled specially.
This is why some of the fields are blank; and some of the filled-in
fields (e.g. the type) are not really accurate.

@node MULE Characters
@section MULE Characters

@defun make-char charset arg1 &optional arg2
This function makes a multi-byte character from @var{charset} and octets
@var{arg1} and @var{arg2}.
@end defun

@defun char-charset ch
This function returns the character set of char @var{ch}.
@end defun

@defun char-octet ch &optional n
This function returns the octet (i.e. position code) numbered @var{n}
(should be 0 or 1) of char @var{ch}.  @var{n} defaults to 0 if omitted.
@end defun

@defun find-charset-region start end &optional buffer
This function returns a list of the charsets in the region between
@var{start} and @var{end}.  @var{buffer} defaults to the current buffer
if omitted.
@end defun

@defun find-charset-string string
This function returns a list of the charsets in @var{string}.
@end defun

@node Composite Characters
@section Composite Characters

Composite characters are not yet completely implemented.

@defun make-composite-char string
This function converts a string into a single composite character.  The
character is the result of overstriking all the characters in the
string.
@end defun

@defun composite-char-string ch
This function returns a string of the characters comprising a composite
character.
@end defun

@defun compose-region start end &optional buffer
This function composes the characters in the region from @var{start} to
@var{end} in @var{buffer} into one composite character.  The composite
character replaces the composed characters.  @var{buffer} defaults to
the current buffer if omitted.
@end defun

@defun decompose-region start end &optional buffer
This function decomposes any composite characters in the region from
@var{start} to @var{end} in @var{buffer}.  This converts each composite
character into one or more characters, the individual characters out of
which the composite character was formed.  Non-composite characters are
left as-is.  @var{buffer} defaults to the current buffer if omitted.
@end defun

@node ISO 2022
@section ISO 2022

This section briefly describes the ISO 2022 encoding standard.  For more
thorough understanding, please refer to the original document of ISO
2022.

Character sets (@dfn{charsets}) are classified into the following four
categories, according to the number of characters of charset:
94-charset, 96-charset, 94x94-charset, and 96x96-charset.

@need 1000
@table @asis
@item 94-charset
 ASCII(B), left(J) and right(I) half of JISX0201, ...
@item 96-charset
 Latin-1(A), Latin-2(B), Latin-3(C), ...
@item 94x94-charset
 GB2312(A), JISX0208(B), KSC5601(C), ...
@item 96x96-charset
 none for the moment
@end table

The character in parentheses after the name of each charset
is the @dfn{final character} @var{F}, which can be regarded as
the identifier of the charset.  ECMA allocates @var{F} to each
charset.  @var{F} is in the range of 0x30..0x7F, but 0x30..0x3F
are only for private use.

Note: @dfn{ECMA} = European Computer Manufacturers Association

There are four @dfn{registers of charsets}, called G0 thru G3.
You can designate (or assign) any charset to one of these
registers.

The code space contained within one octet (of size 256) is divided into
4 areas: C0, GL, C1, and GR.  GL and GR are the areas into which a
register of charset can be invoked into.

@example
@group
        C0: 0x00 - 0x1F
        GL: 0x20 - 0x7F
        C1: 0x80 - 0x9F
        GR: 0xA0 - 0xFF
@end group
@end example

Usually, in the initial state, G0 is invoked into GL, and G1
is invoked into GR.

ISO 2022 distinguishes 7-bit environments and 8-bit environments.  In
7-bit environments, only C0 and GL are used.

Charset designation is done by escape sequences of the form:

@example
        ESC [@var{I}] @var{I} @var{F}
@end example

where @var{I} is an intermediate character in the range 0x20 - 0x2F, and
@var{F} is the final character identifying this charset.

The meaning of intermediate characters are:

@example
@group
        $ [0x24]: indicate charset of dimension 2 (94x94 or 96x96).
        ( [0x28]: designate to G0 a 94-charset whose final byte is @var{F}.
        ) [0x29]: designate to G1 a 94-charset whose final byte is @var{F}.
        * [0x2A]: designate to G2 a 94-charset whose final byte is @var{F}.
        + [0x2B]: designate to G3 a 94-charset whose final byte is @var{F}.
        - [0x2D]: designate to G1 a 96-charset whose final byte is @var{F}.
        . [0x2E]: designate to G2 a 96-charset whose final byte is @var{F}.
        / [0x2F]: designate to G3 a 96-charset whose final byte is @var{F}.
@end group
@end example

The following rule is not allowed in ISO 2022 but can be used in Mule.

@example
        , [0x2C]: designate to G0 a 96-charset whose final byte is @var{F}.
@end example

Here are examples of designations:

@example
@group
        ESC ( B :              designate to G0 ASCII
        ESC - A :              designate to G1 Latin-1
        ESC $ ( A or ESC $ A : designate to G0 GB2312
        ESC $ ( B or ESC $ B : designate to G0 JISX0208
        ESC $ ) C :            designate to G1 KSC5601
@end group
@end example

To use a charset designated to G2 or G3, and to use a charset designated
to G1 in a 7-bit environment, you must explicitly invoke G1, G2, or G3
into GL.  There are two types of invocation, Locking Shift (forever) and
Single Shift (one character only).

Locking Shift is done as follows:

@example
        LS0 or SI (0x0F): invoke G0 into GL
        LS1 or SO (0x0E): invoke G1 into GL
        LS2:  invoke G2 into GL
        LS3:  invoke G3 into GL
        LS1R: invoke G1 into GR
        LS2R: invoke G2 into GR
        LS3R: invoke G3 into GR
@end example

Single Shift is done as follows:

@example
@group
        SS2 or ESC N: invoke G2 into GL
        SS3 or ESC O: invoke G3 into GL
@end group
@end example

(#### Ben says: I think the above is slightly incorrect.  It appears that
SS2 invokes G2 into GR and SS3 invokes G3 into GR, whereas ESC N and
ESC O behave as indicated.  The above definitions will not parse 
EUC-encoded text correctly, and it looks like the code in mule-coding.c
has similar problems.)

You may realize that there are a lot of ISO-2022-compliant ways of
encoding multilingual text.  Now, in the world, there exist many coding
systems such as X11's Compound Text, Japanese JUNET code, and so-called
EUC (Extended UNIX Code); all of these are variants of ISO 2022.

In Mule, we characterize ISO 2022 by the following attributes:

@enumerate
@item
Initial designation to G0 thru G3.
@item
Allow designation of short form for Japanese and Chinese.
@item
Should we designate ASCII to G0 before control characters?
@item
Should we designate ASCII to G0 at the end of line?
@item
7-bit environment or 8-bit environment.
@item
Use Locking Shift or not.
@item
Use ASCII or JIS0201-1976-Roman.
@item
Use JISX0208-1983 or JISX0208-1976.
@end enumerate

(The last two are only for Japanese.)

By specifying these attributes, you can create any variant
of ISO 2022.

Here are several examples:

@example
@group
junet -- Coding system used in JUNET.
        1. G0 <- ASCII, G1..3 <- never used
        2. Yes.
        3. Yes.
        4. Yes.
        5. 7-bit environment
        6. No.
        7. Use ASCII
        8. Use JISX0208-1983
@end group

@group
ctext -- Compound Text
        1. G0 <- ASCII, G1 <- Latin-1, G2,3 <- never used
        2. No.
        3. No.
        4. Yes.
        5. 8-bit environment
        6. No.
        7. Use ASCII
        8. Use JISX0208-1983
@end group

@group
euc-china -- Chinese EUC.  Although many people call this
as "GB encoding", the name may cause misunderstanding.
        1. G0 <- ASCII, G1 <- GB2312, G2,3 <- never used
        2. No.
        3. Yes.
        4. Yes.
        5. 8-bit environment
        6. No.
        7. Use ASCII
        8. Use JISX0208-1983
@end group

@group
korean-mail -- Coding system used in Korean network.
        1. G0 <- ASCII, G1 <- KSC5601, G2,3 <- never used
        2. No.
        3. Yes.
        4. Yes.
        5. 7-bit environment
        6. Yes.
        7. No.
        8. No.
@end group
@end example

Mule creates all these coding systems by default.

@node Coding Systems
@section Coding Systems

A coding system is an object that defines how text containing multiple
character sets is encoded into a stream of (typically 8-bit) bytes.  The
coding system is used to decode the stream into a series of characters
(which may be from multiple charsets) when the text is read from a file
or process, and is used to encode the text back into the same format
when it is written out to a file or process.

For example, many ISO-2022-compliant coding systems (such as Compound
Text, which is used for inter-client data under the X Window System) use
escape sequences to switch between different charsets---Japanese Kanji,
for example, is invoked with @samp{ESC $ ( B}; ASCII is invoked with
@samp{ESC ( B}; and Cyrillic is invoked with @samp{ESC - L}.  See
@code{make-coding-system} for more information.

Coding systems are normally identified using a symbol, and the symbol is
accepted in place of the actual coding system object whenever a coding
system is called for. (This is similar to how faces and charsets work.)

@defun coding-system-p object
This function returns non-@code{nil} if @var{object} is a coding system.
@end defun

@menu
* Coding System Types::               Classifying coding systems.
* EOL Conversion::                    Dealing with different ways of denoting
                                        the end of a line.
* Coding System Properties::          Properties of a coding system.
* Basic Coding System Functions::     Working with coding systems.
* Coding System Property Functions::  Retrieving a coding system's properties.
* Encoding and Decoding Text::        Encoding and decoding text.
* Detection of Textual Encoding::     Determining how text is encoded.
* Big5 and Shift-JIS Functions::      Special functions for these non-standard
                                        encodings.
@end menu

@node Coding System Types
@subsection Coding System Types

@table @code
@item nil
@itemx autodetect
Automatic conversion.  XEmacs attempts to detect the coding system used
in the file.
@item no-conversion
No conversion.  Use this for binary files and such.  On output, graphic
characters that are not in ASCII or Latin-1 will be replaced by a
@samp{?}. (For a no-conversion-encoded buffer, these characters will
only be present if you explicitly insert them.)
@item shift-jis
Shift-JIS (a Japanese encoding commonly used in PC operating systems).
@item iso2022
Any ISO-2022-compliant encoding.  Among other things, this includes JIS
(the Japanese encoding commonly used for e-mail), national variants of
EUC (the standard Unix encoding for Japanese and other languages), and
Compound Text (an encoding used in X11).  You can specify more specific
information about the conversion with the @var{flags} argument.
@item big5
Big5 (the encoding commonly used for Taiwanese).
@item ccl
The conversion is performed using a user-written pseudo-code program.
CCL (Code Conversion Language) is the name of this pseudo-code.
@item internal
Write out or read in the raw contents of the memory representing the
buffer's text.  This is primarily useful for debugging purposes, and is
only enabled when XEmacs has been compiled with @code{DEBUG_XEMACS} set
(the @samp{--debug} configure option).  @strong{Warning}: Reading in a
file using @code{internal} conversion can result in an internal
inconsistency in the memory representing a buffer's text, which will
produce unpredictable results and may cause XEmacs to crash.  Under
normal circumstances you should never use @code{internal} conversion.
@end table

@node EOL Conversion
@subsection EOL Conversion

@table @code
@item nil
Automatically detect the end-of-line type (LF, CRLF, or CR).  Also
generate subsidiary coding systems named @code{@var{name}-unix},
@code{@var{name}-dos}, and @code{@var{name}-mac}, that are identical to
this coding system but have an EOL-TYPE value of @code{lf}, @code{crlf},
and @code{cr}, respectively.
@item lf
The end of a line is marked externally using ASCII LF.  Since this is
also the way that XEmacs represents an end-of-line internally,
specifying this option results in no end-of-line conversion.  This is
the standard format for Unix text files.
@item crlf
The end of a line is marked externally using ASCII CRLF.  This is the
standard format for MS-DOS text files.
@item cr
The end of a line is marked externally using ASCII CR.  This is the
standard format for Macintosh text files.
@item t
Automatically detect the end-of-line type but do not generate subsidiary
coding systems.  (This value is converted to @code{nil} when stored
internally, and @code{coding-system-property} will return @code{nil}.)
@end table

@node Coding System Properties
@subsection Coding System Properties

@table @code
@item mnemonic
String to be displayed in the modeline when this coding system is
active.

@item eol-type
End-of-line conversion to be used.  It should be one of the types
listed in @ref{EOL Conversion}.

@item post-read-conversion
Function called after a file has been read in, to perform the decoding.
Called with two arguments, @var{beg} and @var{end}, denoting a region of
the current buffer to be decoded.

@item pre-write-conversion
Function called before a file is written out, to perform the encoding.
Called with two arguments, @var{beg} and @var{end}, denoting a region of
the current buffer to be encoded.
@end table

The following additional properties are recognized if @var{type} is
@code{iso2022}:

@table @code
@item charset-g0
@itemx charset-g1
@itemx charset-g2
@itemx charset-g3
The character set initially designated to the G0 - G3 registers.
The value should be one of

@itemize @bullet
@item
A charset object (designate that character set)
@item
@code{nil} (do not ever use this register)
@item
@code{t} (no character set is initially designated to the register, but
may be later on; this automatically sets the corresponding
@code{force-g*-on-output} property)
@end itemize

@item force-g0-on-output
@itemx force-g1-on-output
@itemx force-g2-on-output
@itemx force-g3-on-output
If non-@code{nil}, send an explicit designation sequence on output
before using the specified register.

@item short
If non-@code{nil}, use the short forms @samp{ESC $ @@}, @samp{ESC $ A},
and @samp{ESC $ B} on output in place of the full designation sequences
@samp{ESC $ ( @@}, @samp{ESC $ ( A}, and @samp{ESC $ ( B}.

@item no-ascii-eol
If non-@code{nil}, don't designate ASCII to G0 at each end of line on
output.  Setting this to non-@code{nil} also suppresses other
state-resetting that normally happens at the end of a line.

@item no-ascii-cntl
If non-@code{nil}, don't designate ASCII to G0 before control chars on
output.

@item seven
If non-@code{nil}, use 7-bit environment on output.  Otherwise, use 8-bit
environment.

@item lock-shift
If non-@code{nil}, use locking-shift (SO/SI) instead of single-shift or
designation by escape sequence.

@item no-iso6429
If non-@code{nil}, don't use ISO6429's direction specification.

@item escape-quoted
If non-nil, literal control characters that are the same as the
beginning of a recognized ISO 2022 or ISO 6429 escape sequence (in
particular, ESC (0x1B), SO (0x0E), SI (0x0F), SS2 (0x8E), SS3 (0x8F),
and CSI (0x9B)) are ``quoted'' with an escape character so that they can
be properly distinguished from an escape sequence.  (Note that doing
this results in a non-portable encoding.) This encoding flag is used for
byte-compiled files.  Note that ESC is a good choice for a quoting
character because there are no escape sequences whose second byte is a
character from the Control-0 or Control-1 character sets; this is
explicitly disallowed by the ISO 2022 standard.

@item input-charset-conversion
A list of conversion specifications, specifying conversion of characters
in one charset to another when decoding is performed.  Each
specification is a list of two elements: the source charset, and the
destination charset.

@item output-charset-conversion
A list of conversion specifications, specifying conversion of characters
in one charset to another when encoding is performed.  The form of each
specification is the same as for @code{input-charset-conversion}.
@end table

The following additional properties are recognized (and required) if
@var{type} is @code{ccl}:

@table @code
@item decode
CCL program used for decoding (converting to internal format).

@item encode
CCL program used for encoding (converting to external format).
@end table

@node Basic Coding System Functions
@subsection Basic Coding System Functions

@defun find-coding-system coding-system-or-name
This function retrieves the coding system of the given name.

If @var{coding-system-or-name} is a coding-system object, it is simply
returned.  Otherwise, @var{coding-system-or-name} should be a symbol.
If there is no such coding system, @code{nil} is returned.  Otherwise
the associated coding system object is returned.
@end defun

@defun get-coding-system name
This function retrieves the coding system of the given name.  Same as
@code{find-coding-system} except an error is signalled if there is no
such coding system instead of returning @code{nil}.
@end defun

@defun coding-system-list
This function returns a list of the names of all defined coding systems.
@end defun

@defun coding-system-name coding-system
This function returns the name of the given coding system.
@end defun

@defun make-coding-system name type &optional doc-string props
This function registers symbol @var{name} as a coding system.

@var{type} describes the conversion method used and should be one of
the types listed in @ref{Coding System Types}.

@var{doc-string} is a string describing the coding system.

@var{props} is a property list, describing the specific nature of the
character set.  Recognized properties are as in @ref{Coding System
Properties}.
@end defun

@defun copy-coding-system old-coding-system new-name
This function copies @var{old-coding-system} to @var{new-name}.  If
@var{new-name} does not name an existing coding system, a new one will
be created.
@end defun

@defun subsidiary-coding-system coding-system eol-type
This function returns the subsidiary coding system of
@var{coding-system} with eol type @var{eol-type}.
@end defun

@node Coding System Property Functions
@subsection Coding System Property Functions

@defun coding-system-doc-string coding-system
This function returns the doc string for @var{coding-system}.
@end defun

@defun coding-system-type coding-system
This function returns the type of @var{coding-system}.
@end defun

@defun coding-system-property coding-system prop
This function returns the @var{prop} property of @var{coding-system}.
@end defun

@node Encoding and Decoding Text
@subsection Encoding and Decoding Text

@defun decode-coding-region start end coding-system &optional buffer
This function decodes the text between @var{start} and @var{end} which
is encoded in @var{coding-system}.  This is useful if you've read in
encoded text from a file without decoding it (e.g. you read in a
JIS-formatted file but used the @code{binary} or @code{no-conversion} coding
system, so that it shows up as @samp{^[$B!<!+^[(B}).  The length of the
encoded text is returned.  @var{buffer} defaults to the current buffer
if unspecified.
@end defun

@defun encode-coding-region start end coding-system &optional buffer
This function encodes the text between @var{start} and @var{end} using
@var{coding-system}.  This will, for example, convert Japanese
characters into stuff such as @samp{^[$B!<!+^[(B} if you use the JIS
encoding.  The length of the encoded text is returned.  @var{buffer}
defaults to the current buffer if unspecified.
@end defun

@node Detection of Textual Encoding
@subsection Detection of Textual Encoding

@defun coding-category-list
This function returns a list of all recognized coding categories.
@end defun

@defun set-coding-priority-list list
This function changes the priority order of the coding categories.
@var{list} should be a list of coding categories, in descending order of
priority.  Unspecified coding categories will be lower in priority than
all specified ones, in the same relative order they were in previously.
@end defun

@defun coding-priority-list
This function returns a list of coding categories in descending order of
priority.
@end defun

@defun set-coding-category-system coding-category coding-system
This function changes the coding system associated with a coding category.
@end defun

@defun coding-category-system coding-category
This function returns the coding system associated with a coding category.
@end defun

@defun detect-coding-region start end &optional buffer
This function detects coding system of the text in the region between
@var{start} and @var{end}.  Returned value is a list of possible coding
systems ordered by priority.  If only ASCII characters are found, it
returns @code{autodetect} or one of its subsidiary coding systems
according to a detected end-of-line type.  Optional arg @var{buffer}
defaults to the current buffer.
@end defun

@node Big5 and Shift-JIS Functions
@subsection Big5 and Shift-JIS Functions

These are special functions for working with the non-standard
Shift-JIS and Big5 encodings.

@defun decode-shift-jis-char code
This function decodes a JISX0208 character of Shift-JIS coding-system.
@var{code} is the character code in Shift-JIS as a cons of type bytes.
The corresponding character is returned.
@end defun

@defun encode-shift-jis-char ch
This function encodes a JISX0208 character @var{ch} to SHIFT-JIS
coding-system.  The corresponding character code in SHIFT-JIS is
returned as a cons of two bytes.
@end defun

@defun decode-big5-char code
This function decodes a Big5 character @var{code} of BIG5 coding-system.
@var{code} is the character code in BIG5.  The corresponding character
is returned.
@end defun

@defun encode-big5-char ch
This function encodes the Big5 character @var{char} to BIG5
coding-system.  The corresponding character code in Big5 is returned.
@end defun

@node CCL, Category Tables, Coding Systems, MULE
@section CCL

CCL (Code Conversion Language) is a simple structured programming
language designed for character coding conversions.  A CCL program is
compiled to CCL code (represented by a vector of integers) and executed
by the CCL interpreter embedded in Emacs.  The CCL interpreter
implements a virtual machine with 8 registers called @code{r0}, ...,
@code{r7}, a number of control structures, and some I/O operators.  Take
care when using registers @code{r0} (used in implicit @dfn{set}
statements) and especially @code{r7} (used internally by several
statements and operations, especially for multiple return values and I/O 
operations).

CCL is used for code conversion during process I/O and file I/O for
non-ISO2022 coding systems.  (It is the only way for a user to specify a
code conversion function.)  It is also used for calculating the code
point of an X11 font from a character code.  However, since CCL is
designed as a powerful programming language, it can be used for more
generic calculation where efficiency is demanded.  A combination of
three or more arithmetic operations can be calculated faster by CCL than
by Emacs Lisp.

@strong{Warning:}  The code in @file{src/mule-ccl.c} and
@file{$packages/lisp/mule-base/mule-ccl.el} is the definitive
description of CCL's semantics.  The previous version of this section
contained several typos and obsolete names left from earlier versions of
MULE, and many may remain.  (I am not an experienced CCL programmer; the
few who know CCL well find writing English painful.)

A CCL program transforms an input data stream into an output data
stream.  The input stream, held in a buffer of constant bytes, is left
unchanged.  The buffer may be filled by an external input operation,
taken from an Emacs buffer, or taken from a Lisp string.  The output
buffer is a dynamic array of bytes, which can be written by an external
output operation, inserted into an Emacs buffer, or returned as a Lisp
string.

A CCL program is a (Lisp) list containing two or three members.  The
first member is the @dfn{buffer magnification}, which indicates the
required minimum size of the output buffer as a multiple of the input
buffer.  It is followed by the @dfn{main block} which executes while
there is input remaining, and an optional @dfn{EOF block} which is
executed when the input is exhausted.  Both the main block and the EOF
block are CCL blocks.

A @dfn{CCL block} is either a CCL statement or list of CCL statements.
A @dfn{CCL statement} is either a @dfn{set statement} (either an integer 
or an @dfn{assignment}, which is a list of a register to receive the
assignment, an assignment operator, and an expression) or a @dfn{control 
statement} (a list starting with a keyword, whose allowable syntax
depends on the keyword).

@menu
* CCL Syntax::          CCL program syntax in BNF notation.
* CCL Statements::      Semantics of CCL statements.
* CCL Expressions::     Operators and expressions in CCL.
* Calling CCL::         Running CCL programs.
* CCL Examples::        The encoding functions for Big5 and KOI-8.
@end menu

@node    CCL Syntax, CCL Statements, CCL,       CCL
@comment Node,       Next,           Previous,  Up
@subsection CCL Syntax

The full syntax of a CCL program in BNF notation:

@format
CCL_PROGRAM :=
        (BUFFER_MAGNIFICATION
         CCL_MAIN_BLOCK
         [ CCL_EOF_BLOCK ])

BUFFER_MAGNIFICATION := integer
CCL_MAIN_BLOCK := CCL_BLOCK
CCL_EOF_BLOCK := CCL_BLOCK

CCL_BLOCK :=
        STATEMENT | (STATEMENT [STATEMENT ...])
STATEMENT :=
        SET | IF | BRANCH | LOOP | REPEAT | BREAK | READ | WRITE
        | CALL | END

SET :=
        (REG = EXPRESSION)
        | (REG ASSIGNMENT_OPERATOR EXPRESSION)
        | integer

EXPRESSION := ARG | (EXPRESSION OPERATOR ARG)

IF := (if EXPRESSION CCL_BLOCK [CCL_BLOCK])
BRANCH := (branch EXPRESSION CCL_BLOCK [CCL_BLOCK ...])
LOOP := (loop STATEMENT [STATEMENT ...])
BREAK := (break)
REPEAT :=
        (repeat)
        | (write-repeat [REG | integer | string])
        | (write-read-repeat REG [integer | ARRAY])
READ :=
        (read REG ...)
        | (read-if (REG OPERATOR ARG) CCL_BLOCK CCL_BLOCK)
        | (read-branch REG CCL_BLOCK [CCL_BLOCK ...])
WRITE :=
        (write REG ...)
        | (write EXPRESSION)
        | (write integer) | (write string) | (write REG ARRAY)
        | string
CALL := (call ccl-program-name)
END := (end)

REG := r0 | r1 | r2 | r3 | r4 | r5 | r6 | r7
ARG := REG | integer
OPERATOR :=
        + | - | * | / | % | & | '|' | ^ | << | >> | <8 | >8 | //
        | < | > | == | <= | >= | != | de-sjis | en-sjis
ASSIGNMENT_OPERATOR :=
        += | -= | *= | /= | %= | &= | '|=' | ^= | <<= | >>=
ARRAY := '[' integer ... ']'
@end format

@node    CCL Statements, CCL Expressions, CCL Syntax, CCL
@comment Node,           Next,            Previous,   Up
@subsection CCL Statements

The Emacs Code Conversion Language provides the following statement
types: @dfn{set}, @dfn{if}, @dfn{branch}, @dfn{loop}, @dfn{repeat},
@dfn{break}, @dfn{read}, @dfn{write}, @dfn{call}, and @dfn{end}.

@heading Set statement:

The @dfn{set} statement has three variants with the syntaxes
@samp{(@var{reg} = @var{expression})},
@samp{(@var{reg} @var{assignment_operator} @var{expression})}, and
@samp{@var{integer}}.  The assignment operator variation of the
@dfn{set} statement works the same way as the corresponding C expression
statement does.  The assignment operators are @code{+=}, @code{-=},
@code{*=}, @code{/=}, @code{%=}, @code{&=}, @code{|=}, @code{^=},
@code{<<=}, and @code{>>=}, and they have the same meanings as in C.  A
"naked integer" @var{integer} is equivalent to a @var{set} statement of
the form @code{(r0 = @var{integer})}.

@heading I/O statements:

The @dfn{read} statement takes one or more registers as arguments.  It
reads one byte (a C char) from the input into each register in turn.  

The @dfn{write} takes several forms.  In the form @samp{(write @var{reg}
...)} it takes one or more registers as arguments and writes each in
turn to the output.  The integer in a register (interpreted as an
Emchar) is encoded to multibyte form (ie, Bufbytes) and written to the
current output buffer.  If it is less than 256, it is written as is.
The forms @samp{(write @var{expression})} and @samp{(write
@var{integer})} are treated analogously.  The form @samp{(write
@var{string})} writes the constant string to the output.  A
"naked string" @samp{@var{string}} is equivalent to the statement @samp{(write
@var{string})}.  The form @samp{(write @var{reg} @var{array})} writes
the @var{reg}th element of the @var{array} to the output.

@heading Conditional statements:

The @dfn{if} statement takes an @var{expression}, a @var{CCL block}, and
an optional @var{second CCL block} as arguments.  If the
@var{expression} evaluates to non-zero, the first @var{CCL block} is
executed.  Otherwise, if there is a @var{second CCL block}, it is
executed.

The @dfn{read-if} variant of the @dfn{if} statement takes an
@var{expression}, a @var{CCL block}, and an optional @var{second CCL
block} as arguments.  The @var{expression} must have the form
@code{(@var{reg} @var{operator} @var{operand})} (where @var{operand} is
a register or an integer).  The @code{read-if} statement first reads
from the input into the first register operand in the @var{expression},
then conditionally executes a CCL block just as the @code{if} statement
does.

The @dfn{branch} statement takes an @var{expression} and one or more CCL
blocks as arguments.  The CCL blocks are treated as a zero-indexed
array, and the @code{branch} statement uses the @var{expression} as the
index of the CCL block to execute.  Null CCL blocks may be used as
no-ops, continuing execution with the statement following the
@code{branch} statement in the containing CCL block.  Out-of-range
values for the @var{EXPRESSION} are also treated as no-ops.

The @dfn{read-branch} variant of the @dfn{branch} statement takes an
@var{register}, a @var{CCL block}, and an optional @var{second CCL
block} as arguments.  The @code{read-branch} statement first reads from
the input into the @var{register}, then conditionally executes a CCL
block just as the @code{branch} statement does.

@heading Loop control statements:

The @dfn{loop} statement creates a block with an implied jump from the
end of the block back to its head.  The loop is exited on a @code{break} 
statement, and continued without executing the tail by a @code{repeat}
statement.

The @dfn{break} statement, written @samp{(break)}, terminates the
current loop and continues with the next statement in the current
block. 

The @dfn{repeat} statement has three variants, @code{repeat},
@code{write-repeat}, and @code{write-read-repeat}.  Each continues the
current loop from its head, possibly after performing I/O.
@code{repeat} takes no arguments and does no I/O before jumping.
@code{write-repeat} takes a single argument (a register, an 
integer, or a string), writes it to the output, then jumps.
@code{write-read-repeat} takes one or two arguments.  The first must
be a register.  The second may be an integer or an array; if absent, it
is implicitly set to the first (register) argument.
@code{write-read-repeat} writes its second argument to the output, then
reads from the input into the register, and finally jumps.  See the
@code{write} and @code{read} statements for the semantics of the I/O
operations for each type of argument.

@heading Other control statements:

The @dfn{call} statement, written @samp{(call @var{ccl-program-name})},
executes a CCL program as a subroutine.  It does not return a value to
the caller, but can modify the register status.

The @dfn{end} statement, written @samp{(end)}, terminates the CCL
program successfully, and returns to caller (which may be a CCL
program).  It does not alter the status of the registers.

@node    CCL Expressions, Calling CCL, CCL Statements, CCL
@comment Node,            Next,        Previous,       Up
@subsection CCL Expressions

CCL, unlike Lisp, uses infix expressions.  The simplest CCL expressions
consist of a single @var{operand}, either a register (one of @code{r0},
..., @code{r0}) or an integer.  Complex expressions are lists of the
form @code{( @var{expression} @var{operator} @var{operand} )}.  Unlike
C, assignments are not expressions.

In the following table, @var{X} is the target resister for a @dfn{set}.
In subexpressions, this is implicitly @code{r7}.  This means that
@code{>8}, @code{//}, @code{de-sjis}, and @code{en-sjis} cannot be used
freely in subexpressions, since they return parts of their values in
@code{r7}.  @var{Y} may be an expression, register, or integer, while
@var{Z} must be a register or an integer.

@multitable @columnfractions .22 .14 .09 .55
@item Name @tab Operator @tab Code @tab C-like Description
@item CCL_PLUS @tab @code{+} @tab 0x00 @tab X = Y + Z
@item CCL_MINUS @tab @code{-} @tab 0x01 @tab X = Y - Z
@item CCL_MUL @tab @code{*} @tab 0x02 @tab X = Y * Z
@item CCL_DIV @tab @code{/} @tab 0x03 @tab X = Y / Z
@item CCL_MOD @tab @code{%} @tab 0x04 @tab X = Y % Z
@item CCL_AND @tab @code{&} @tab 0x05 @tab X = Y & Z
@item CCL_OR @tab @code{|} @tab 0x06 @tab X = Y | Z
@item CCL_XOR @tab @code{^} @tab 0x07 @tab X = Y ^ Z
@item CCL_LSH @tab @code{<<} @tab 0x08 @tab X = Y << Z
@item CCL_RSH @tab @code{>>} @tab 0x09 @tab X = Y >> Z
@item CCL_LSH8 @tab @code{<8} @tab 0x0A @tab X = (Y << 8) | Z
@item CCL_RSH8 @tab @code{>8} @tab 0x0B @tab X = Y >> 8, r[7] = Y & 0xFF
@item CCL_DIVMOD @tab @code{//} @tab 0x0C @tab X = Y / Z, r[7] = Y % Z
@item CCL_LS @tab @code{<} @tab 0x10 @tab X = (X < Y)
@item CCL_GT @tab @code{>} @tab 0x11 @tab X = (X > Y)
@item CCL_EQ @tab @code{==} @tab 0x12 @tab X = (X == Y)
@item CCL_LE @tab @code{<=} @tab 0x13 @tab X = (X <= Y)
@item CCL_GE @tab @code{>=} @tab 0x14 @tab X = (X >= Y)
@item CCL_NE @tab @code{!=} @tab 0x15 @tab X = (X != Y)
@item CCL_ENCODE_SJIS @tab @code{en-sjis} @tab 0x16 @tab X = HIGHER_BYTE (SJIS (Y, Z))
@item @tab @tab @tab r[7] = LOWER_BYTE (SJIS (Y, Z)
@item CCL_DECODE_SJIS @tab @code{de-sjis} @tab 0x17 @tab X = HIGHER_BYTE (DE-SJIS (Y, Z))
@item @tab @tab @tab r[7] = LOWER_BYTE (DE-SJIS (Y, Z))
@end multitable

The CCL operators are as in C, with the addition of CCL_LSH8, CCL_RSH8,
CCL_DIVMOD, CCL_ENCODE_SJIS, and CCL_DECODE_SJIS.  The CCL_ENCODE_SJIS
and CCL_DECODE_SJIS treat their first and second bytes as the high and
low bytes of a two-byte character code.  (SJIS stands for Shift JIS, an
encoding of Japanese characters used by Microsoft.  CCL_ENCODE_SJIS is a
complicated transformation of the Japanese standard JIS encoding to
Shift JIS.  CCL_DECODE_SJIS is its inverse.)  It is somewhat odd to
represent the SJIS operations in infix form.

@node    Calling CCL, CCL Examples,  CCL Expressions, CCL
@comment Node,        Next,          Previous,        Up
@subsection Calling CCL

CCL programs are called automatically during Emacs buffer I/O when the
external representation has a coding system type of @code{shift-jis},
@code{big5}, or @code{ccl}.  The program is specified by the coding
system (@pxref{Coding Systems}).  You can also call CCL programs from
other CCL programs, and from Lisp using these functions:

@defun ccl-execute ccl-program status
Execute @var{ccl-program} with registers initialized by
@var{status}.  @var{ccl-program} is a vector of compiled CCL code
created by @code{ccl-compile}.  It is an error for the program to try to 
execute a CCL I/O command.  @var{status} must be a vector of nine
values, specifying the initial value for the R0, R1 .. R7 registers and
for the instruction counter IC.  A @code{nil} value for a register
initializer causes the register to be set to 0.  A @code{nil} value for
the IC initializer causes execution to start at the beginning of the
program.  When the program is done, @var{status} is modified (by
side-effect) to contain the ending values for the corresponding
registers and IC.  
@end defun

@defun ccl-execute-on-string ccl-program status str &optional continue
Execute @var{ccl-program} with initial @var{status} on
@var{string}.  @var{ccl-program} is a vector of compiled CCL code
created by @code{ccl-compile}.  @var{status} must be a vector of nine
values, specifying the initial value for the R0, R1 .. R7 registers and
for the instruction counter IC.  A @code{nil} value for a register
initializer causes the register to be set to 0.  A @code{nil} value for
the IC initializer causes execution to start at the beginning of the
program.  An optional fourth argument @var{continue}, if non-nil, causes
the IC to
remain on the unsatisfied read operation if the program terminates due
to exhaustion of the input buffer.  Otherwise the IC is set to the end
of the program.  When the program is done, @var{status} is modified (by 
side-effect) to contain the ending values for the corresponding
registers and IC.  Returns the resulting string.
@end defun

To call a CCL program from another CCL program, it must first be
registered:

@defun register-ccl-program name ccl-program
Register @var{name} for CCL program @var{program} in
@code{ccl-program-table}.  @var{program} should be the compiled form of
a CCL program, or nil.  Return index number of the registered CCL
program.
@end defun

Information about the processor time used by the CCL interpreter can be
obtained using these functions:

@defun ccl-elapsed-time
Returns the elapsed processor time of the CCL interpreter as cons of
user and system time, as
floating point numbers measured in seconds.  If only one
overall value can be determined, the return value will be a cons of that
value and 0.
@end defun

@defun ccl-reset-elapsed-time
Resets the CCL interpreter's internal elapsed time registers.
@end defun

@node    CCL Examples, ,     Calling CCL, CCL
@comment Node,         Next, Previous,    Up
@subsection CCL Examples

This section is not yet written.

@node Category Tables, , CCL, MULE
@section Category Tables

  A category table is a type of char table used for keeping track of
categories.  Categories are used for classifying characters for use in
regexps---you can refer to a category rather than having to use a
complicated [] expression (and category lookups are significantly
faster).

  There are 95 different categories available, one for each printable
character (including space) in the ASCII charset.  Each category is
designated by one such character, called a @dfn{category designator}.
They are specified in a regexp using the syntax @samp{\cX}, where X is a
category designator. (This is not yet implemented.)

  A category table specifies, for each character, the categories that
the character is in.  Note that a character can be in more than one
category.  More specifically, a category table maps from a character to
either the value @code{nil} (meaning the character is in no categories)
or a 95-element bit vector, specifying for each of the 95 categories
whether the character is in that category.

  Special Lisp functions are provided that abstract this, so you do not
have to directly manipulate bit vectors.

@defun category-table-p obj
This function returns @code{t} if @var{arg} is a category table.
@end defun

@defun category-table &optional buffer
This function returns the current category table.  This is the one
specified by the current buffer, or by @var{buffer} if it is
non-@code{nil}.
@end defun

@defun standard-category-table
This function returns the standard category table.  This is the one used
for new buffers.
@end defun

@defun copy-category-table &optional table
This function constructs a new category table and return it.  It is a
copy of the @var{table}, which defaults to the standard category table.
@end defun

@defun set-category-table table &optional buffer
This function selects a new category table for @var{buffer}.  One
argument, a category table.  @var{buffer} defaults to the current buffer
if omitted.
@end defun

@defun category-designator-p obj
This function returns @code{t} if @var{arg} is a category designator (a
char in the range @samp{' '} to @samp{'~'}).
@end defun

@defun category-table-value-p obj
This function returns @code{t} if @var{arg} is a category table value.
Valid values are @code{nil} or a bit vector of size 95.
@end defun