## DIST: This is the distribution Makefile for XEmacs.  configure can
## DIST: make most of the changes to this file you might want, so try
## DIST: that first.

## This file is part of XEmacs.

## XEmacs is free software; you can redistribute it and/or modify it
## under the terms of the GNU General Public License as published by the
## Free Software Foundation; either version 2, or (at your option) any
## later version.

## XEmacs is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.

## You should have received a copy of the GNU General Public License
## along with XEmacs; see the file COPYING.  If not, write to
## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
## Boston, MA 02111-1307, USA.

## make all	to compile and build XEmacs.
## make install	to build and install it.
## make install-only	to install after a previous complete build
## make TAGS	to update tags tables.

## make clean  or  make mostlyclean
##      Delete all files from the current directory that are normally
##      created by building the program.	 Don't delete the files that
##      record the configuration.  Also preserve files that could be made
##      by building, but normally aren't because the distribution comes
##      with them.

##      Delete `.dvi' files here if they are not part of the distribution.

## make distclean
##      Delete all files from the current directory that are created by
##      configuring or building the program.  If you have unpacked the
##      source and built the program without creating any other files,
##      `make distclean' should leave only the files that were in the
##      distribution.

## make realclean
##      Delete everything from the current directory that can be
##      reconstructed with this Makefile.  This typically includes
##      everything deleted by distclean, plus more: C source files
##      produced by Bison, tags tables, info files, and so on.

## make extraclean
##      Still more severe - delete backup and autosave files, too.

SHELL = /bin/sh
@SET_MAKE@

## ==================== Things `configure' Might Edit ====================

CC=@CC@
CPP=@CPP@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
YACC=@YACC@
pwd=/bin/pwd
RM=rm -f

## These help us choose version- and architecture-specific directories
## to install files in.

## This should be the number of the XEmacs version we're building,
## like `19.12' or `19.13'.
version=@version@

## This should be the name of the configuration we're building XEmacs
## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@

## ==================== Where To Install Things ====================

## The default location for installation.  Everything is placed in
## subdirectories of this directory.  The default values for many of
## the variables below are expressed in terms of this one, so you may
## not need to change them.  This defaults to /usr/local.
prefix=@prefix@

## Like `prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@

## Where to install XEmacs and other binaries that people will want to
## run directly (like etags).
bindir=@bindir@

## Where to install architecture-independent data files.
## ${lispdir} and ${etcdir} are subdirectories of this.
datadir=@datadir@

pkgdir=@pkgdir@

## Where to install and expect the files that XEmacs modifies as it runs.
## These files are all architecture-independent. Right now, the
## only such data is the locking directory;
## ${lockdir} is a subdirectory of this.
statedir=@statedir@

## Where to install and expect executable files to be run by XEmacs
## rather than directly by users, and other architecture-dependent data
## ${archlibdir} is a subdirectory of this.
libdir=@libdir@

## Where to install XEmacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1

## Where to install and expect the info files describing XEmacs.	In the
## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
## since there are now many packages documented with the texinfo
## system, it is inappropriate to imply that it is part of XEmacs.
infodir=@infodir@

## This is set to 'yes' if the user specified the --infodir flag at
## configuration time.
infodir_user_defined=@infodir_user_defined@

## Where to find the source code.  The source code for XEmacs's C kernel is
## expected to be in ${srcdir}/src, and the source code for XEmacs's
## utility programs is expected to be in ${srcdir}/lib-src.  This is
## set by the configure script's `--srcdir' option.
srcdir=@srcdir@

## ==================== XEmacs-specific directories ====================

## These variables hold the values XEmacs will actually use.  They are
## based on the values of the standard Make variables above.

## Where to install the lisp files distributed with
## XEmacs.  This includes the XEmacs version, so that the
## lisp files for different versions of XEmacs will install
## themselves in separate directories.
lispdir=@lispdir@

## This is set to 'yes' if the user specified the --lispdir or
## --datadir flag at configuration time.
lispdir_user_defined=@lispdir_user_defined@

## Directories XEmacs should search for lisp files specific
## to this site (i.e. customizations), before consulting
## ${lispdir}.  This should be a colon-separated list of
## directories.
sitelispdir=@sitelispdir@

## Where XEmacs will search for its lisp files while
## building.  This is only used during the process of
## compiling XEmacs, to help XEmacs find its lisp files
## before they've been installed in their final location.
## It's usually identical to lispdir, except that the
## entry for the directory containing the installed lisp
## files has been replaced with ../lisp.  This should be a
## colon-separated list of directories.
buildlispdir=${srcdir}/lisp

## Where to install the other architecture-independent
## data files distributed with XEmacs (like the tutorial,
## the cookie recipes and the Zippy database). This path
## usually contains the XEmacs version number, so the data
## files for multiple versions of XEmacs may be installed
## at once.
etcdir=@etcdir@

## This is set to 'yes' if the user specified the --etcdir or
## --datadir flag at configuration time.
etcdir_user_defined=@etcdir_user_defined@

## Where to create and expect the locking directory, where
## the XEmacs locking code keeps track of which files are
## currently being edited.
lockdir=@lockdir@

## This is set to 'yes' if the user specified the --lockdir or
## --statedir flag at configuration time.
lockdir_user_defined=@lockdir_user_defined@

## Where to put executables to be run by XEmacs rather than
## the user.  This path usually includes the XEmacs version
## and configuration name, so that multiple configurations
## for multiple versions of XEmacs may be installed at
## once.
archlibdir=@archlibdir@

## This is set to 'yes' if the user specified any of --exec-prefix,
## --libdir or --archlibdir at configuration time.
archlibdir_user_defined=@archlibdir_user_defined@

## ==================== Utility Programs for the Build ====================

## Allow the user to specify the install program.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

## ============================= Targets ==============================

## Subdirectories to make recursively.  `lisp' is not included
## because the compiled lisp files are part of the distribution
## and you cannot remake them without installing XEmacs first.
MAKE_SUBDIR = @MAKE_SUBDIR@

## Subdirectories that can be made recursively.
SUBDIR = ${MAKE_SUBDIR} man

## The makefiles of the directories in ${MAKE_SUBDIR}.
SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@

## Subdirectories to install, and where they'll go.
## lib-src's makefile knows how to install it, so we don't do that here.
## When installing the info files, we need to do special things to
## avoid nuking an existing dir file, so we don't do that here;
## instead, we have written out explicit code in the `install' targets.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/puresize_adjust.h src/config.h lwlib/config.h

all:	${GENERATED_HEADERS} ${MAKE_SUBDIR}

## For performance and consistency, no built-in rules
.SUFFIXES:

.NO_PARALLEL:	${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
.PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads

## Convenience target for XEmacs beta testers
beta:	clean all-elc

## Convenience target for XEmacs maintainers
## This would run `make-xemacsdist' if I were really confident that everything
## was turnkey.
dist:	all-elc info

## Build XEmacs and recompile out-of-date and missing .elc files along
## the way.
all-elc all-elcs:   lib-src lwlib dump-elcs src
	MAKE='$(MAKE)' sh ${srcdir}/lib-src/update-elc.sh

## Sub-target for all-elc.
dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
	cd src && $(MAKE) dump-elcs $(MFLAGS) \
		CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'

autoloads:	src
	MAKE='$(MAKE)' sh ${srcdir}/lib-src/update-autoloads.sh

## We force the rebuilding of src/paths.h because the user might give
## different values for the various directories.  Since we use
## move-if-change, src/paths.h only actually changes if the user did
## something notable, so the only unnecessary work we do is in building
## src/paths.h.tmp, which isn't much.  Note that sed is not in /bin on
## 386bsd.
src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC.src.paths.h
	@echo "Producing \`src/paths.h' from \`src/paths.h.in'."
	@$(RM) src/paths.h.tmp
	@cp ${srcdir}/src/paths.h.in src/paths.h.tmp
	@-chmod 0644 src/paths.h.tmp
	@(echo '#define PATH_PREFIX "${prefix}"'; \
	 if test "${lispdir_user_defined}" = "yes"; \
	   then echo    '#define PATH_LOADSEARCH "${lispdir}"'; \
	   else echo '/* #define PATH_LOADSEARCH "${lispdir}" */'; \
	 fi; \
	 if test "${archlibdir_user_defined}" = "yes"; \
	   then echo    '#define PATH_EXEC "${archlibdir}"'; \
	   else echo '/* #define PATH_EXEC "${archlibdir}" */'; \
	 fi; \
	 if test "${etcdir_user_defined}" = "yes"; \
	   then echo    '#define PATH_DATA "${etcdir}"'; \
	   else echo '/* #define PATH_DATA "${etcdir}" */'; \
	 fi; \
	 if test "${lockdir_user_defined}" = "yes"; \
	   then echo    '#define PATH_LOCK "${lockdir}"'; \
	   else echo '/* #define PATH_LOCK "${lockdir}" */'; \
	 fi; \
	 if test "${infodir_user_defined}" = "yes"; \
	   then echo    '#define PATH_INFO "${infodir}"'; \
	   else echo '/* #define PATH_INFO "${infodir}" */'; \
	fi; ) >> src/paths.h.tmp; \
	sh ${srcdir}/move-if-change src/paths.h.tmp src/paths.h

## We have to force the building of Emacs.ad.h as well in order to get it
## updated correctly when VPATH is being used.  Since we use move-if-change,
## it will only actually change if the user modified ${etcdir}/Emacs.ad.
src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
	@echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
	@$(RM) src/Emacs.ad.h
	@(echo "/*	Do not edit this file!" ; \
	  echo "  	Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
	  echo " */" ; \
	  /bin/sh ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
	  src/Emacs.ad.h

src/puresize_adjust.h:	${srcdir}/src/puresize.h
	@echo "Resetting \`src/puresize_adjust.h'."; \
	(echo "/*	Do not edit this file!" ; \
	 echo "  	Automatically generated by XEmacs */" ; \
	 echo "#define PURESIZE_ADJUSTMENT 0") > $@

src:	@SRC_SUBDIR_DEPS@ FRC.src
lib-src: FRC.lib-src
lwlib:	FRC.lwlib
dynodump: FRC.dynodump
FRC.src FRC.lib-src FRC.lwlib FRC.dynodump:

.RECURSIVE: ${SUBDIR}

${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
	cd $@ && $(MAKE) all $(MFLAGS) \
		CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'

Makefile: ${srcdir}/Makefile.in config.status
	./config.status

src/Makefile: ${srcdir}/src/Makefile.in.in config.status
	./config.status

lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
	./config.status

lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
	./config.status

lwlib/config.h: ${srcdir}/lwlib/config.h.in
	./config.status && touch $@

src/config.h: ${srcdir}/src/config.h.in
	./config.status && touch $@

## ==================== Installation ====================

## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.

## On AIX, use tar xBf.
## On Xenix, use tar xpf.

.PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir

## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS).  In order to make this safe, we make sure that the
## source exists and is distinct from the destination.

## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
## they "won't ever modify src/paths.h".  But that means you can't do
## 'make install' right off the bat because src/paths.h won't exist.
## And, in XEmacs case, src/Emacs.ad.h won't exist either.  I also
## don't see the point in avoiding modifying paths.h.  It creates an
## inconsistency in the build process.  So we go ahead and depend on
## all.  --cet

install-only: ${MAKE_SUBDIR} install-arch-dep install-arch-indep

install: all install-arch-dep install-arch-indep;

install-arch-dep: mkdir
	cd lib-src && \
	  $(MAKE) install $(MFLAGS) prefix=${prefix} \
	    exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
	    archlibdir=${archlibdir}
	if [ `(cd ${archlibdir} && $(pwd))` != `(cd ./lib-src && $(pwd))` ]; \
	then \
	   ${INSTALL_DATA} lib-src/DOC ${archlibdir}/DOC ; \
	   for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
	     (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
	   done ; \
	else true; fi
	${INSTALL_PROGRAM} src/xemacs ${bindir}/xemacs-${version}
	-chmod 0755 ${bindir}/xemacs-${version}
	$(RM) ${bindir}/xemacs
	cd ${bindir} && ${LN_S} xemacs-${version} ./xemacs

install-arch-indep: mkdir
	-@set ${COPYDESTS} ; \
	 for dir in ${COPYDIR} ; do \
	   if [ `(cd $$1 && $(pwd))` != `(cd $${dir} && $(pwd))` ] ; then \
	     : do nothing - echo "rm -rf $$1" ; \
	   fi ; \
	   shift ; \
	 done
	-set ${COPYDESTS} ; \
	 for dir in ${COPYDESTS} ; do test -d $${dir} || mkdir $${dir} ; done ; \
	 for dir in ${COPYDIR} ; do \
	   dest=$$1 ; shift ; \
	   test -d $${dir} \
	     -a `(cd $${dir} && $(pwd))` != `(cd $${dest} && $(pwd))` \
	   && (echo "Copying $${dir}..." ; \
	       (cd $${dir} && tar -cf - . ) | \
		(cd $${dest} && umask 022 && tar -xf - );\
	       chmod 0755 $${dest}; \
	       for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
		 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
	       done) ; \
	 done
	if test `(cd ${srcdir}/info && $(pwd))` != `(cd ${infodir} && $(pwd))` && cd ${srcdir}/info; then \
	  if test ! -f ${infodir}/dir -a -f dir ; then \
	    ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
	  fi ; \
	  for file in *.info* ; do \
	    ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
	    chmod 0644 ${infodir}/$${file}; \
	  done ; \
	fi
	cd ${srcdir}/etc && \
	  for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
	    ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
	    chmod 0644 ${mandir}/$${page}${manext} ; \
	  done
	@echo "If you would like to save approximately 15M of disk space, do"
	@echo "make gzip-el"
	@echo "or you may run "
	@echo lib-src/gzip-el.sh lispdir " from the command line."
	@echo "Where lispdir is where the lisp files were installed, i.e.,"
	@echo "${lispdir}"

gzip-el:
	lib-src/gzip-el.sh ${lispdir}

MAKEPATH=./lib-src/make-path
## Build all the directories we're going to install XEmacs in.	Since
## we may be creating several layers of directories (for example,
## /usr/local/lib/xemacs-19.13/mips-dec-ultrix4.2), we use make-path
## instead of mkdir.  Not all systems' mkdirs have the `-p' flag.
mkdir: FRC.mkdir
	${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
	  ${bindir} ${datadir} ${libdir} ${sitelispdir} ${pkdir}
	-chmod 0777 ${lockdir}

## Delete all the installed files that the `install' target would
## create (but not the noninstalled files such as `make all' would
## create).

#### Don't delete the lisp and etc directories if they're in the source tree.
#### This target has not been updated in sometime and until it is it
#### would be extremely dangerous for anyone to use it.
#uninstall:
#	(cd lib-src; 					\
#	 $(MAKE) $(MFLAGS) uninstall			\
#	    prefix=${prefix} exec_prefix=${exec_prefix}	\
#	    bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
#	for dir in ${lispdir} ${etcdir} ; do 		\
#	  case `(cd $${dir} ; $(pwd))` in			\
#	    `(cd ${srcdir} ; $(pwd))`* ) ;;		\
#	    * ) $(RM) $${dir} ;;			\
#	  esac ;					\
#	  case $${dir} in				\
#	    ${datadir}/xemacs/${version}/* )		\
#	      $(RM) -r ${datadir}/xemacs/${version}	\
#	    ;;						\
#	  esac ;					\
#	done
#	cd ${infodir} && $(RM) cl* xemacs* forms* info* vip*
#	cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
#	cd ${bindir} && $(RM) xemacs-${version} xemacs


## Some makes seem to remember that they've built something called FRC,
## so you can only use a given FRC once per makefile.
FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:

## ==================== Cleaning up and miscellanea ====================

.PHONY: mostlyclean clean distclean realclean extraclean

## `mostlyclean'
##      Like `clean', but may refrain from deleting a few files that people
##      normally don't want to recompile.  For example, the `mostlyclean'
##      target for GCC does not delete `libgcc.a', because recompiling it
##      is rarely necessary and takes a lot of time.
mostlyclean: FRC.mostlyclean
	for d in $(SUBDIR); do (cd $$d && $(MAKE) $(MFLAGS) $@); done

## `clean'
##      Delete all files from the current directory that are normally
##      created by building the program.  Don't delete the files that
##      record the configuration.  Also preserve files that could be made
##      by building, but normally aren't because the distribution comes
##      with them.

##      Delete `.dvi' files here if they are not part of the distribution.
clean: FRC.clean
	for d in $(SUBDIR); do (cd $$d && $(MAKE) $(MFLAGS) $@); done
	$(RM) core

## `distclean'
##      Delete all files from the current directory that are created by
##      configuring or building the program.  If you have unpacked the
##      source and built the program without creating any other files,
##      `make distclean' should leave only the files that were in the
##      distribution.
top_distclean=\
	$(RM) config.status config.log config-tmp-* build-install Installation ; \
	for d in src lib-src lwlib dynodump ; do \
	  $(RM) $$d/Makefile $$d/Makefile.in ; \
	done ; \
	$(RM) core .sbinit Makefile lock/*

distclean: FRC.distclean
	for d in lock site-lisp; do test -d $$d || mkdir $$d; done
	for d in $(SUBDIR); do (cd $$d && $(MAKE) $(MFLAGS) $@); done
	-${top_distclean}

## `realclean'
##      Delete everything from the current directory that can be
##      reconstructed with this Makefile.  This typically includes
##      everything deleted by distclean, plus more: C source files
##      produced by Bison, tags tables, info files, and so on.

##      One exception, however: `make realclean' should not delete
##      `configure' even if `configure' can be remade using a rule in the
##      Makefile.  More generally, `make realclean' should not delete
##      anything that needs to exist in order to run `configure' and then
##      begin to build the program.
realclean: FRC.realclean
	for d in $(SUBDIR); do (cd $$d && $(MAKE) $(MFLAGS) $@); done
	-${top_distclean}

## This doesn't actually appear in the coding standards, but Karl
## says GCC supports it, and that's where the configuration part of
## the coding standards seem to come from.  It's like distclean, but
## it deletes backup and autosave files too.
extraclean:
	for d in $(SUBDIR); do (cd $$d && $(MAKE) $(MFLAGS) $@); done
	$(RM) *~ \#*
	-${top_distclean}

## Unlocking and relocking.  The idea of these productions is to reduce
## hassles when installing an incremental tar of XEmacs.  Do `make unlock'
## before unlocking the file to take the write locks off all sources so
## that tar xvof will overwrite them without fuss.  Then do `make relock'
## afterward so that VC mode will know which files should be checked in
## if you want to mung them.

## Note: it's no disaster if these productions miss a file or two; tar
## and VC will swiftly let you know if this happens, and it is easily
## corrected.
SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
	README build-install.in configure make-dist move-if-change

.PHONY: unlock relock TAGS tags check dist info dvi mcs

unlock:
	chmod u+w $(SOURCES) cpp/*
	-cd elisp && chmod u+w Makefile README *.texi
	cd etc     && $(MAKE) $(MFLAGS) unlock
	cd lib-src && $(MAKE) $(MFLAGS) unlock
	cd lisp    && $(MAKE) $(MFLAGS) unlock
	cd lisp/term && chmod u+w README *.el
	cd man && chmod u+w *texi* ChangeLog split-man
	cd lwlib && chmod u+w *.[ch] Makefile.in.in
	cd src && $(MAKE) $(MFLAGS) $@

relock:
	chmod u-w $(SOURCES) cpp/*
	-cd elisp && chmod u-w Makefile README *.texi
	cd etc     && $(MAKE) $(MFLAGS) relock
	cd lib-src && $(MAKE) $(MFLAGS) relock
	cd lisp    && $(MAKE) $(MFLAGS) relock
	cd lisp/term && chmod u+w README *.el
	cd man && chmod u+w *texi* ChangeLog split-man
	cd lwlib && chmod u+w *.[ch] Makefile.in.in
	cd src && $(MAKE) $(MFLAGS) $@

TAGS tags: FRC.tags
	@echo "If you don't have a copy of etags around, then do 'make lib-src' first."
	@PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
	  echo "Using etags from `which etags`."
	PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
	etags --regex='/[ 	]*DEF\(VAR\|INE\)_[A-Z_]+[ 	]*([ 	]*"\([^"]+\)"/\2/' src/*.[ch] ; \
	for d in `find lisp -name SCCS -prune -o -name RCS -prune -o -type d -print` ; do \
	  (cd $$d && if [ "`echo *.el`" != "*.el" ] ; then etags -a -o ${srcdir}/TAGS *.el ; fi ) ; \
	done ; \
	etags -a lwlib/*.[ch]

check:
	@echo "We don't have any automated tests for XEmacs yet."

## Is this something Chuck used and doesn't work with CVS?  -slb
## dist:
##	cd ${srcdir} && make-dist

info: FRC.info
	cd ${srcdir}/man && $(MAKE) $(MFLAGS) $@

dvi:
	cd ${srcdir}/man && $(MAKE) $(MFLAGS) $@

## Fix up version information in executables (Solaris-only)
mcs:
	date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
	ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
	for f in `file lib-src/* src/xemacs | grep ELF | sed -e 's/:.*//'`; do \
	  mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \
	done