view src/sysdep.h @ 4921:17362f371cc2

add more byte-code assertions and better failure output -------------------- ChangeLog entries follow: -------------------- src/ChangeLog addition: 2010-02-03 Ben Wing <ben@xemacs.org> * alloc.c (Fmake_byte_code): * bytecode.h: * lisp.h: * lread.c: * lread.c (readevalloop): * lread.c (Fread): * lread.c (Fread_from_string): * lread.c (read_list_conser): * lread.c (read_list): * lread.c (vars_of_lread): * symbols.c: * symbols.c (Fdefine_function): Turn on the "compiled-function annotation hack". Implement it properly by hooking into Fdefalias(). Note in the docstring to `defalias' that we do this. Remove some old broken code and change code that implemented the old kludgy way of hooking into the Lisp reader into bracketed by `#ifdef COMPILED_FUNCTION_ANNOTATION_HACK_OLD_WAY', which is not enabled. Also enable byte-code metering when DEBUG_XEMACS -- this is a form of profiling for computing histograms of which sequences of two bytecodes are used most often. * bytecode-ops.h: * bytecode-ops.h (OPCODE): New file. Extract out all the opcodes and declare them using OPCODE(), a bit like frame slots and such. This way the file can be included multiple times if necessary to iterate multiple times over the byte opcodes. * bytecode.c: * bytecode.c (NUM_REMEMBERED_BYTE_OPS): * bytecode.c (OPCODE): * bytecode.c (assert_failed_with_remembered_ops): * bytecode.c (READ_UINT_2): * bytecode.c (READ_INT_1): * bytecode.c (READ_INT_2): * bytecode.c (PEEK_INT_1): * bytecode.c (PEEK_INT_2): * bytecode.c (JUMP_RELATIVE): * bytecode.c (JUMP_NEXT): * bytecode.c (PUSH): * bytecode.c (POP_WITH_MULTIPLE_VALUES): * bytecode.c (DISCARD): * bytecode.c (UNUSED): * bytecode.c (optimize_byte_code): * bytecode.c (optimize_compiled_function): * bytecode.c (Fbyte_code): * bytecode.c (vars_of_bytecode): * bytecode.c (init_opcode_table_multi_op): * bytecode.c (reinit_vars_of_bytecode): * emacs.c (main_1): * eval.c (funcall_compiled_function): * symsinit.h: Any time we change either the instruction pointer or the stack pointer, assert that we're going to move it to a valid location. This should catch failures right when they occur rather than sometime later. This requires that we pass in another couple of parameters into some functions (only with error-checking enabled, see below). Also keep track, using a circular queue, of the last 100 byte opcodes seen, and when we hit an assert failure during byte-code execution, output the contents of the queue in a nice readable fashion. This requires that bytecode-ops.h be included a second time so that a table mapping opcodes to the name of their operation can be constructed. This table is constructed in new function reinit_vars_of_bytecode(). Everything in the last two paras happens only when ERROR_CHECK_BYTE_CODE. Add some longish comments describing how the arrays that hold the stack and instructions, and the pointers used to access them, work. * gc.c: Import some code from my `latest-fix' workspace to mark the staticpro's in order from lowest to highest, rather than highest to lowest, so it's easier to debug when something goes wrong. * lisp.h (abort_with_message): Renamed from abort_with_msg(). * symbols.c (defsymbol_massage_name_1): * symbols.c (defsymbol_nodump): * symbols.c (defsymbol): * symbols.c (defkeyword): * symeval.h (DEFVAR_SYMVAL_FWD_OBJECT): Make the various calls to staticpro() instead call staticpro_1(), passing in the name of the C var being staticpro'ed, so that it shows up in staticpro_names. Otherwise staticpro_names just has 1000+ copies of the word `location'.
author Ben Wing <ben@xemacs.org>
date Wed, 03 Feb 2010 08:01:55 -0600
parents 5bb998bf84bd
children 308d34e9f07d
line wrap: on
line source

/* System-dependent prototypes
   Copyright (C) 1985, 1993, 1994 Free Software Foundation, Inc.
   Copyright (C) 2001, 2002 Ben Wing.

This file is part of XEmacs.

XEmacs is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.

XEmacs is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with XEmacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

/* Synched up with: FSF 19.30.  Split out of sysdep.c/emacs.c. */

#ifndef INCLUDED_sysdep_h_
#define INCLUDED_sysdep_h_

#include <setjmp.h>

#ifdef PDUMP
int pdump_read_file (char **pdump_start_pos, size_t *pdump_length);
#endif

int eight_bit_tty (struct device *d);

void stuff_char (struct console *con, int c);

void init_baud_rate (struct device *d);

void set_exclusive_use (int fd);

void set_descriptor_non_blocking (int fd);

int get_pty_max_bytes (int fd);
Ibyte get_eof_char (int fd);

/* Wait for subprocess with process id `pid' to terminate and
   make sure it will get eliminated (not remain forever as a zombie) */
void wait_for_termination (int pid);

/* flush any pending output
 * (may flush input as well; it does not matter the way we use it)
 */
void flush_pending_output (int channel);

void child_setup_tty (int out);

/* Suspend the Emacs process; give terminal to its superior.  */
void sys_suspend (void);
/* Suspend a process if possible; give terminal to its superior. */
void sys_suspend_process (int process);

void request_sigio (void);
void unrequest_sigio (void);

BEGIN_C_DECLS

#ifndef WIN32_NATIVE
extern char **environ;
#endif

void stop_interrupts (void);
void start_interrupts (void);
MODULE_API void slow_down_interrupts (void);
MODULE_API void speed_up_interrupts (void);
void init_poll_for_quit (void);

END_C_DECLS

/* Used so that signals can break out of system calls that aren't
   naturally interruptible. */

extern JMP_BUF break_system_call_jump;
extern volatile int can_break_system_calls;

/* Call these functions if you want to change some terminal parameter --
   reset the console, change the parameter, and init it again. */
void init_one_console (struct console *c);
void reset_one_console (struct console *c);
void init_one_device (struct device *d);
void reset_one_device (struct device *d);

/* Prepare all terminals for exiting Emacs; move the cursor to the
   bottom of the frame, turn off special modes, etc.  Called at exit.
   This calls reset_one_console() on all consoles and does some other
   stuff (e.g. fix the foreground pgroup). */

void reset_all_consoles (void);

/* Call these functions if you are going to temporarily exit back to
   the shell (e.g. when suspending).  This calls reset_one_console()
   on the initial console and does some other stuff (e.g. fix the
   foreground pgroup). */

void reset_initial_console (void);
void reinit_initial_console (void);

/* We muck around with our process group.  This function needs
   to be called at startup.  The rest of the mucking is done as
   part of the functions reset_all_consoles(), reset_initial_console(),
   and reinit_initial_console(). */

void init_process_group (void);
void munge_tty_process_group (void);
void unmunge_tty_process_group (void);

void disconnect_controlling_terminal (void);

/* Return nonzero if safe to use tabs in output.
   At the time this is called, init_sys_modes has not been done yet.  */
int tabs_safe_p (struct device *d);

/* Get terminal size from system.
   If zero or a negative number is stored, the value is not valid.  */
void get_tty_device_size (struct device *d, int *widthp, int *heightp);
/* Set the logical window size associated with descriptor FD */
int set_window_size (int fd, int height, int width);

/* Set up the proper status flags for use of a pty.  */
void setup_pty (int fd);

/* Return the address of the start of the text segment prior to unexec. */
char *start_of_text (void);
/* Return the address of the start of the data segment prior to unexec. */
void *start_of_data (void);

/* Get_system_name returns as its value a string for system-name to return. */
void init_system_name (void);

#ifdef WIN32_NATIVE
void *sbrk (unsigned long increment);
#endif

Bytecount total_data_usage (void);

#endif /* INCLUDED_sysdep_h_ */