Mercurial > hg > xemacs-beta

view src/commands.h @ 4921:17362f371cc2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
add more byte-code assertions and better failure output -------------------- ChangeLog entries follow: -------------------- src/ChangeLog addition: 2010-02-03 Ben Wing <ben@xemacs.org> * alloc.c (Fmake_byte_code): * bytecode.h: * lisp.h: * lread.c: * lread.c (readevalloop): * lread.c (Fread): * lread.c (Fread_from_string): * lread.c (read_list_conser): * lread.c (read_list): * lread.c (vars_of_lread): * symbols.c: * symbols.c (Fdefine_function): Turn on the "compiled-function annotation hack". Implement it properly by hooking into Fdefalias(). Note in the docstring to `defalias' that we do this. Remove some old broken code and change code that implemented the old kludgy way of hooking into the Lisp reader into bracketed by `#ifdef COMPILED_FUNCTION_ANNOTATION_HACK_OLD_WAY', which is not enabled. Also enable byte-code metering when DEBUG_XEMACS -- this is a form of profiling for computing histograms of which sequences of two bytecodes are used most often. * bytecode-ops.h: * bytecode-ops.h (OPCODE): New file. Extract out all the opcodes and declare them using OPCODE(), a bit like frame slots and such. This way the file can be included multiple times if necessary to iterate multiple times over the byte opcodes. * bytecode.c: * bytecode.c (NUM_REMEMBERED_BYTE_OPS): * bytecode.c (OPCODE): * bytecode.c (assert_failed_with_remembered_ops): * bytecode.c (READ_UINT_2): * bytecode.c (READ_INT_1): * bytecode.c (READ_INT_2): * bytecode.c (PEEK_INT_1): * bytecode.c (PEEK_INT_2): * bytecode.c (JUMP_RELATIVE): * bytecode.c (JUMP_NEXT): * bytecode.c (PUSH): * bytecode.c (POP_WITH_MULTIPLE_VALUES): * bytecode.c (DISCARD): * bytecode.c (UNUSED): * bytecode.c (optimize_byte_code): * bytecode.c (optimize_compiled_function): * bytecode.c (Fbyte_code): * bytecode.c (vars_of_bytecode): * bytecode.c (init_opcode_table_multi_op): * bytecode.c (reinit_vars_of_bytecode): * emacs.c (main_1): * eval.c (funcall_compiled_function): * symsinit.h: Any time we change either the instruction pointer or the stack pointer, assert that we're going to move it to a valid location. This should catch failures right when they occur rather than sometime later. This requires that we pass in another couple of parameters into some functions (only with error-checking enabled, see below). Also keep track, using a circular queue, of the last 100 byte opcodes seen, and when we hit an assert failure during byte-code execution, output the contents of the queue in a nice readable fashion. This requires that bytecode-ops.h be included a second time so that a table mapping opcodes to the name of their operation can be constructed. This table is constructed in new function reinit_vars_of_bytecode(). Everything in the last two paras happens only when ERROR_CHECK_BYTE_CODE. Add some longish comments describing how the arrays that hold the stack and instructions, and the pointers used to access them, work. * gc.c: Import some code from my `latest-fix' workspace to mark the staticpro's in order from lowest to highest, rather than highest to lowest, so it's easier to debug when something goes wrong. * lisp.h (abort_with_message): Renamed from abort_with_msg(). * symbols.c (defsymbol_massage_name_1): * symbols.c (defsymbol_nodump): * symbols.c (defsymbol): * symbols.c (defkeyword): * symeval.h (DEFVAR_SYMVAL_FWD_OBJECT): Make the various calls to staticpro() instead call staticpro_1(), passing in the name of the C var being staticpro'ed, so that it shows up in staticpro_names. Otherwise staticpro_names just has 1000+ copies of the word `location'.
author Ben Wing <ben@xemacs.org>
date Wed, 03 Feb 2010 08:01:55 -0600
parents 61855263cb07
children 308d34e9f07d
line wrap: on
line source

/* Definitions needed by most editing commands.
   Copyright (C) 1985-1994 Free Software Foundation, Inc.

This file is part of XEmacs.

XEmacs is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.

XEmacs is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with XEmacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

/* Synched up with: FSF 19.30. */

#ifndef INCLUDED_commands_h_
#define INCLUDED_commands_h_

#if 0 /* FSFmacs */
#define Ctl(c) ((c)&037)
#endif

/* bunches of FSF keymap and minibuffer stuff not here (in Lisp) */

extern Lisp_Object Vlast_command_event;

extern Lisp_Object Vlast_input_event;

/* These next two for compatibility; they are V... because they can be
   nil. (Many FSFmacs equivalent variables incorrectly omit the V
   even though they are Lisp_Objects.) */
/* Last character of last key sequence.  */
extern Lisp_Object Vlast_command_char;

extern Lisp_Object Vlast_input_char;

#if 0 /* FSFmacs */
/* Last input character read as a command, not counting menus
   reached by the mouse.  */
extern Lisp_Object Vlast_nonmenu_event;
#endif

#if 0 /* Local to event-stream.c */
/* List of command events to be re-read, or Qnil.  */
extern Lisp_Object Vunread_command_events;
#endif

#if 0 /* FSFmacs */
/* Command char event to be re-read, or -1 if none.
   Setting this is obsolete, but some things should still check it.  */
extern int unread_command_char;
#endif

/* Last command executed by the editor command loop, not counting
   commands that set the prefix argument.  */

extern Lisp_Object Vlast_command;

/* The command being executed by the command loop.
   Commands may set this, and the value set will be copied into
   Vlast_command instead of the actual command.  */
extern Lisp_Object Vthis_command;

#if 0 /* FSFmacs */
/* If not Qnil, this is a switch-frame event which we decided to put
   off until the end of a key sequence.  This should be read as the
   next command input, after any Vunread_command_events.

   read_key_sequence uses this to delay switch-frame events until the
   end of the key sequence; Fread_char uses it to put off switch-frame
   events until a non-ASCII event is acceptable as input.  */
extern Lisp_Object unread_switch_frame;
#endif

#if 0 /* Local to event-stream.c */
/* The value of point when the last command was executed.  */
extern int last_point_position;

/* The buffer that was current when the last command was started.  */
extern Lisp_Object last_point_position_buffer;
#endif

/* This is so incredibly losing that it's been completely eliminated
   from the code.  Trust me, there are cleaner, safer ways of
   achieving the same functionality (e.g. use select()). */
/* extern int immediate_quit;	    Nonzero means ^G can quit instantly */

/* Nonzero if input is coming from the keyboard */

#define INTERACTIVE (NILP (Vexecuting_macro) && !noninteractive)

/* Set this nonzero to force reconsideration of modeline. */

extern int modeline_changed;

extern Lisp_Object recent_keys_ring;
extern int recent_keys_ring_index;

/* #ifndef LISP_COMMAND_LOOP */
extern Lisp_Object Vtop_level;
/* #else */
extern Lisp_Object Vcommand_loop;
/* #endif */
DECLARE_DOESNT_RETURN (initial_command_loop (Lisp_Object));
DECLARE_DOESNT_RETURN_TYPE (Lisp_Object,
			    call_command_loop (Lisp_Object catch_errors));
extern Fixnum command_loop_level;

extern Lisp_Object Vkeyboard_translate_table;
extern Lisp_Object Vlast_input_time;
extern Lisp_Object Vcurrent_mouse_event;

extern int zmacs_regions;
extern int zmacs_region_active_p;
extern int zmacs_region_stays;
void zmacs_update_region (void);
void zmacs_deactivate_region (void);
Lisp_Object zmacs_region_buffer (void);

extern Lisp_Object Vthis_command_keys; /* event-stream.c */

#endif /* INCLUDED_commands_h_ */