Mercurial > hg > xemacs-beta

view lisp/mule/mule-win32-init.el @ 4921:17362f371cc2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
add more byte-code assertions and better failure output -------------------- ChangeLog entries follow: -------------------- src/ChangeLog addition: 2010-02-03 Ben Wing <ben@xemacs.org> * alloc.c (Fmake_byte_code): * bytecode.h: * lisp.h: * lread.c: * lread.c (readevalloop): * lread.c (Fread): * lread.c (Fread_from_string): * lread.c (read_list_conser): * lread.c (read_list): * lread.c (vars_of_lread): * symbols.c: * symbols.c (Fdefine_function): Turn on the "compiled-function annotation hack". Implement it properly by hooking into Fdefalias(). Note in the docstring to `defalias' that we do this. Remove some old broken code and change code that implemented the old kludgy way of hooking into the Lisp reader into bracketed by `#ifdef COMPILED_FUNCTION_ANNOTATION_HACK_OLD_WAY', which is not enabled. Also enable byte-code metering when DEBUG_XEMACS -- this is a form of profiling for computing histograms of which sequences of two bytecodes are used most often. * bytecode-ops.h: * bytecode-ops.h (OPCODE): New file. Extract out all the opcodes and declare them using OPCODE(), a bit like frame slots and such. This way the file can be included multiple times if necessary to iterate multiple times over the byte opcodes. * bytecode.c: * bytecode.c (NUM_REMEMBERED_BYTE_OPS): * bytecode.c (OPCODE): * bytecode.c (assert_failed_with_remembered_ops): * bytecode.c (READ_UINT_2): * bytecode.c (READ_INT_1): * bytecode.c (READ_INT_2): * bytecode.c (PEEK_INT_1): * bytecode.c (PEEK_INT_2): * bytecode.c (JUMP_RELATIVE): * bytecode.c (JUMP_NEXT): * bytecode.c (PUSH): * bytecode.c (POP_WITH_MULTIPLE_VALUES): * bytecode.c (DISCARD): * bytecode.c (UNUSED): * bytecode.c (optimize_byte_code): * bytecode.c (optimize_compiled_function): * bytecode.c (Fbyte_code): * bytecode.c (vars_of_bytecode): * bytecode.c (init_opcode_table_multi_op): * bytecode.c (reinit_vars_of_bytecode): * emacs.c (main_1): * eval.c (funcall_compiled_function): * symsinit.h: Any time we change either the instruction pointer or the stack pointer, assert that we're going to move it to a valid location. This should catch failures right when they occur rather than sometime later. This requires that we pass in another couple of parameters into some functions (only with error-checking enabled, see below). Also keep track, using a circular queue, of the last 100 byte opcodes seen, and when we hit an assert failure during byte-code execution, output the contents of the queue in a nice readable fashion. This requires that bytecode-ops.h be included a second time so that a table mapping opcodes to the name of their operation can be constructed. This table is constructed in new function reinit_vars_of_bytecode(). Everything in the last two paras happens only when ERROR_CHECK_BYTE_CODE. Add some longish comments describing how the arrays that hold the stack and instructions, and the pointers used to access them, work. * gc.c: Import some code from my `latest-fix' workspace to mark the staticpro's in order from lowest to highest, rather than highest to lowest, so it's easier to debug when something goes wrong. * lisp.h (abort_with_message): Renamed from abort_with_msg(). * symbols.c (defsymbol_massage_name_1): * symbols.c (defsymbol_nodump): * symbols.c (defsymbol): * symbols.c (defkeyword): * symeval.h (DEFVAR_SYMVAL_FWD_OBJECT): Make the various calls to staticpro() instead call staticpro_1(), passing in the name of the C var being staticpro'ed, so that it shows up in staticpro_names. Otherwise staticpro_names just has 1000+ copies of the word `location'.
author Ben Wing <ben@xemacs.org>
date Wed, 03 Feb 2010 08:01:55 -0600
parents d402d7b18bd8
children a63e666bb68a 308d34e9f07d
line wrap: on
line source

;;; mule-win32-init.el --- initialization code for MS Windows/Cygwin under MULE
;;; Copyright (C) 2001, 2002 Ben Wing.

;; This file is part of XEmacs.

;; XEmacs is free software; you can redistribute it and/or modify it
;; under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; XEmacs is distributed in the hope that it will be useful, but
;; WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
;; General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with XEmacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

(make-coding-system
 'mswindows-multibyte 'mswindows-multibyte
 "MS Windows Multibyte (current code page)"
 '(mnemonic "MSW-MB"
   documentation
   "MS Windows multibyte -- current code page.

This implements the encoding specified by the current code page --
i.e. the ANSI code page corresponding to the current locale, as
returned by

  (mswindows-locale-code-page (mswindows-current-locale))
"
   locale current
   code-page ansi))

;; we temporarily aliased this to raw-text in intl-win32.c.
(define-coding-system-alias 'mswindows-multibyte-system-default nil)
(make-coding-system
 'mswindows-multibyte-system-default 'mswindows-multibyte
 "MS Windows Multibyte (system default code page)"
 '(mnemonic "MSW-MB-SysDef"
   documentation
   "MS Windows multibyte -- system default code page.

This implements the encoding specified by the system default code page
-- i.e. the ANSI code page corresponding to the system default locale,
as returned by

  (mswindows-locale-code-page (mswindows-system-default-locale))
"
   locale system-default
   code-page ansi))

(make-coding-system
 'mswindows-multibyte-user-default 'mswindows-multibyte
 "MS Windows Multibyte (user default code page)"
 '(mnemonic "MSW-MB-UserDef"
   documentation
   "MS Windows multibyte -- user default code page.

This implements the encoding specified by the user default code page
-- i.e. the ANSI code page corresponding to the user default locale,
as returned by

  (mswindows-locale-code-page (mswindows-user-default-locale))
"
   locale user-default
   code-page ansi))

(make-coding-system
 'mswindows-multibyte-oem 'mswindows-multibyte
 "MS Windows Multibyte (current OEM code page)"
 '(mnemonic "MSW-MB-OEM"
   documentation
   "MS Windows multibyte -- current OEM code page.

This implements the encoding specified by the current OEM code page
-- i.e. the OEM code page corresponding to the current locale,
as returned by

  (mswindows-locale-oem-code-page (mswindows-current-locale))
"
   locale current
   code-page oem))

(make-coding-system
 'mswindows-multibyte-oem-system-default 'mswindows-multibyte
 "MS Windows Multibyte (system default OEM code page)"
 '(mnemonic "MSW-MB-OEM-SysDef"
   documentation
   "MS Windows multibyte -- system default OEM code page.

This implements the encoding specified by the system default OEM code page
-- i.e. the OEM code page corresponding to the system default locale,
as returned by

  (mswindows-locale-oem-code-page (mswindows-system-default-locale))
"
   locale system-default
   code-page oem))

(make-coding-system
 'mswindows-multibyte-oem-user-default 'mswindows-multibyte
 "MS Windows Multibyte (user default OEM code page)"
 '(mnemonic "MSW-MB-OEM-UserDef"
   documentation
   "MS Windows multibyte -- user default OEM code page.

This implements the encoding specified by the user default OEM code page
-- i.e. the OEM code page corresponding to the user default locale,
as returned by

  (mswindows-locale-oem-code-page (mswindows-user-default-locale))
"
   locale user-default
   code-page oem))

(loop
  for (ansioem cp category name)
  in '(("EBCDIC"      037 no-conversion "EBCDIC")
       ("OEM"         437 no-conversion "MS-DOS United States")
       ("EBCDIC"      500 no-conversion "EBCDIC \"500V1\"")

       ;; This is ISO-8859-6. 
       ;; ("OEM"         708 "Arabic (ASMO 708)")
       ("OEM"         709 no-conversion "Arabic (ASMO 449+, BCON V4)")
       ("OEM"         710 no-conversion "Arabic (Transparent Arabic)")
       ("OEM"         720 no-conversion "Arabic (Transparent ASMO)")
       ("OEM"         737 no-conversion "Greek (formerly 437G)")
       ("OEM"         775 no-conversion "Baltic")
       ("OEM"         850 no-conversion "MS-DOS Multilingual (Latin I)")
       ("OEM"         852 no-conversion "MS-DOS Slavic (Latin II)")
       ("OEM"         855 no-conversion "IBM Cyrillic (primarily Russian)")
       ("OEM"         857 no-conversion "IBM Turkish")
       ("OEM"         860 no-conversion "MS-DOS Portuguese")
       ("OEM"         861 no-conversion "MS-DOS Icelandic")
       ("OEM"         862 no-conversion "Hebrew")
       ("OEM"         863 no-conversion "MS-DOS Canadian-French")
       ("OEM"         864 no-conversion "Arabic")
       ("OEM"         865 no-conversion "MS-DOS Nordic")
       ; ("OEM"         866 no-conversion "MS-DOS Russian")
       ("OEM"         869 no-conversion "IBM Modern Greek")
       ("Ansi/OEM"    874 no-conversion "Thai")
       ("EBCDIC"      875 no-conversion "EBCDIC")
       ("Ansi/OEM"    932 shift_jis "Japanese")
       ("Ansi/OEM"    936 iso_8_2 "Chinese (PRC, Singapore)")
       ("Ansi/OEM"    949 iso_8_2 "Korean")
       ("Ansi/OEM"    950 big5 "Chinese (Taiwan; Hong Kong SAR, PRC)")
       ("EBCDIC"      1026 no-conversion "EBCDIC")

       ;; This code page doesn't work. See 
       ;; http://blogs.msdn.com/michkap/archive/2005/08/01/446475.aspx
       ; ("ANSI"        1200 utf-16-little-endian "Unicode (BMP of ISO 10646)")

       ;; We implement this ourselves, and keeping the same implementation
       ;; across platforms means behaviour is a bit more consistent.
       ; ("ANSI"        1250 no-conversion "Windows 3.1 Eastern European")
       ; ("ANSI"        1251 no-conversion "Windows 3.1 Cyrillic")
       ; ("ANSI"        1252 no-conversion "Windows 3.1 US (ANSI)")

        ; ("ANSI"        1253 no-conversion "Windows 3.1 Greek")
       ("ANSI"        1254 no-conversion "Windows 3.1 Turkish")
       ("ANSI"        1255 no-conversion "Hebrew")
       ;; We implement these ourselves.
       ; ("ANSI"        1256 no-conversion "Arabic")
       ("ANSI"        1257 no-conversion "Baltic")
       ("ANSI"        1258 no-conversion "VietNam")
       ;; #### Is this category right? I don't have Lunde to hand, and the
       ;; online information on Johab is scant.
       ("Ansi/OEM"    1361 iso_8_2 "Korean (Johab)")
       ("Mac"         10000 no-conversion "Macintosh Roman")
       ("Mac"         10001 shift_jis "Macintosh Japanese")
       ("Mac"         10006 no-conversion "Macintosh Greek I")
       ("Mac"         10007 no-conversion "Macintosh Cyrillic")
       ("Mac"         10029 no-conversion "Macintosh Latin 2")
       ("Mac"         10079 no-conversion "Macintosh Icelandic")
       ("Mac"         10081 no-conversion "Macintosh Turkish"))
  do
  (make-coding-system
   (intern (format "windows-%s" cp))
   'mswindows-multibyte
   (format "MS Windows code page %s (%s, %s)" cp ansioem name)
   `(mnemonic
     ,(format "MSW-%s" cp)
     code-page ,cp
     documentation
     ,(format
       "MS Windows Multibyte -- code page %s (%s, %s).

This implements the encoding specified by code page %s.
For more information on code pages, see `mswindows-charset-code-page'."
       cp ansioem name cp)))
  (define-coding-system-alias 
    (intern (format "cp%s" cp))
    (intern (format "windows-%s" cp)))
  (coding-system-put (intern (format "windows-%s" cp)) 'category category))