@c This is part of the XEmacs manual.
@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997 Free Software Foundation, Inc.
@c See file xemacs.texi for copying conditions.
@node Packages, Basic, Startup Paths, Top
@comment  node-name,  next,  previous,  up

@section Packages
@cindex packages

The XEmacs 21 distribution comes only with a very basic set of
built-in modes and packages.  Most of the packages that were part of
the distribution of earlier versions of XEmacs are now available
separately.  The installer as well as the user can choose which
packages to install; the actual installation process is easy.
This gives an installer the ability to tailor an XEmacs installation for
local needs with safe removal of unnecessary code.

@menu
* Package Terminology:: Understanding different kinds of packages.
* Installing Packages:: How to install packages.
* Building Packages::   Building packages from CVS sources.
* Local.rules File::    This is an important file that you must create.
* Creating Packages::   The basics.
* Available Packages::  A brief directory of packaged LISP.
@end menu

@node Package Terminology, Installing Packages, , Packages
@comment  node-name,  next,  previous,  up
@heading Package Terminology:
@subsection Package Flavors

There are two main flavors of packages.

@itemize @bullet
@item 
Regular Packages
@cindex regular packages
A regular package is one in which multiple files are involved and one
may not in general safely remove any of them.

@item 
Single-File Packages
@cindex single-file packages
A single-file package is an aggregate collection of thematically
related but otherwise independent lisp files.  These files are bundled 
together for download convenience and individual files may be deleted at
will without any loss of functionality.  However, we would recommend
that you follow this rule of thumb: "When in doubt, don't delete".
@end itemize

@subsection Package Distributions
@cindex package distributions
XEmacs Lisp packages are distributed in two ways, depending on the
intended use.  Binary Packages are for installers and end-users that can
be installed directly into an XEmacs package directory.  Source Packages
are for developers and include all files necessary for rebuilding
bytecompiled lisp and creating tarballs for distribution.

@subsection Binary Packages
@cindex binary packages
Binary packages may be installed directly into an XEmacs package
hierarchy.

@subsection Source Packages
@cindex source packages
Source packages contain all of the Package author's (where appropriate
in regular packages) source code plus all of the files necessary to
build distribution tarballs (Unix Tar format files, gzipped for space
savings).

Currently, source packages are only available via CVS.  See
@url{http://cvs.xemacs.org/} for details.
@node Installing Packages, Building Packages, Package Terminology, Packages
@comment  node-name,  next,  previous,  up
@cindex installing packages
@cindex install
@heading Installing Packages:
@subsection Getting Started

When you first download XEmacs 21, you will usually first grab the
@dfn{core distribution},
@cindex core distribution
a file called
@file{xemacs-21.x.x.tar.gz}. (Replace the @t{21.x.x} by the current version
number.)  The core distribution contains the sources of XEmacs and a
minimal set of Emacs Lisp files, which are in the subdirectory named
@file{lisp}.  This subdirectory used to contain all Emacs Lisp files
distributed with XEmacs.  Now, to conserve disk space, most
non-essential packages were made optional.

@subsection Choosing the Packages You Need
@cindex choosing packages
The @ref{Available Packages} can currently be found in the same ftp directory
where you grabbed the core distribution from, and are located in the
subdirectory @file{packages}.  Package file names follow
the naming convention @file{<package-name>-<version>-pkg.tar.gz}.

If you have EFS @ref{(EFS)}, packages can be installed over the network.
Alternatively, if you have copies of the packages locally, you can
install packages from a local disk or CDROM.

The file @file{etc/PACKAGES} in the core distribution contains a list of
the @ref{Available Packages} at the time of the XEmacs release.

You can also get a list of available packages, and whether or not they
are installed, using the visual package browser and installer.  You can
access it via the menus:

@example
        Tools -> Packages -> List and Install
@end example

Or, you can get to it via the keyboard:

@example
M-x pui-list-packages
@end example

Hint to system administrators of multi-user systems: it might be a good
idea to install all packages and not interfere with the wishes of your
users.

If you can't find which package provides the feature you require, try
using the @code{package-get-package-provider} function. Eg., if you know 
that you need @code{thingatpt}, type:

@example
M-x package-get-package-provider RET thingatpt
@end example

which will return something like (fsf-compat "1.08"). You can the use
one of the methods above for installing the package you want.

@subsection XEmacs and Installing Packages

There are three main ways to install packages:

@menu
* Sumo::              All at once, using the 'Sumo Tarball'.
* Manually::          Using individual package tarballs.
* Automatically::     Using the package tools from XEmacs.
* Which Packages::    Which packages to install.
* Removing Packages:: Removing packages.
@end menu

But regardless of the method you use to install packages, they can only
be used by XEmacs after a restart.

@node Sumo, Manually, ,Installing Packages
@comment  node-name,  next,  previous,  up
@cindex sumo package install
@heading Installing the Sumo Packages:
Those with little time, cheap connections and plenty of disk space can
install all the packages at once using the sumo tarballs.
Download the file: @file{xemacs-sumo.tar.gz}

For an XEmacs compiled with Mule you also need: @file{xemacs-mule-sumo.tar.gz}

N.B. They are called 'Sumo Tarballs' for good reason. They are
currently about 19MB and 4.5MB (gzipped) respectively.

Install them by:

@code{cd $prefix/lib/xemacs ; gunzip -c <tarballname> | tar xvf - RET}

Or, if you have GNU tar:

@code{cd $prefix/lib/xemacs ; tar zxvf /path/to/<tarballname> RET}

As the Sumo tarballs are not regenerated as often as the individual
packages, it is recommended that you use the automatic package tools
afterwards to pick up any recent updates.

@node Manually, Automatically, Sumo, Installing Packages
@comment  node-name,  next,  previous,  up
@cindex manual package install
@heading Manual Package Installation:
Fetch the packages from the FTP site, CD-ROM whatever. The filenames
have the form @file{name-<version>-pkg.tar.gz} and are gzipped tar files. For
a fresh install it is sufficient to untar the file at the top of the
package hierarchy. 

Note: If you are upgrading packages already installed, it's best to
remove the old package first @ref{Removing Packages}.

For example if we are installing the @file{xemacs-base}
package (version 1.48):

@example
   mkdir $prefix/lib/xemacs/xemacs-packages RET # if it does not exist yet
   cd $prefix/lib/xemacs/xemacs-packages RET
   gunzip -c /path/to/xemacs-base-1.48-pkg.tar.gz | tar xvf - RET

Or if you have GNU tar, the last step can be:

   tar zxvf /path/to/xemacs-base-1.48-pkg.tar.gz RET
@end example

For MULE related packages, it is best to untar into the mule-packages
hierarchy, i.e. for the @file{mule-base} package, version 1.37:

@example
   mkdir $prefix/lib/xemacs/mule-packages RET # if it does not exist yet
   cd $prefix/lib/xemacs/mule-packages RET
   gunzip -c /path/to/mule-base-1.37-pkg.tar.gz | tar xvf - RET

Or if you have GNU tar, the last step can be:

   tar zxvf /path/to/mule-base-1.37-pkg.tar.gz RET
@end example

@node Automatically, Which Packages ,Manually, Installing Packages
@comment  node-name,  next,  previous,  up
@cindex automatic package install
@cindex package tools
@heading Automatic Package Installation:
XEmacs comes with some tools to make the periodic updating and
installing easier. It will notice if new packages or versions are
available and will fetch them from the FTP site.

Unfortunately this requires that a few packages are already in place.
You will have to install them by hand as above or use a SUMO tarball.
This requirement will hopefully go away in the future. The packages
you need are:

@example
   efs          - To fetch the files from the FTP site or mirrors.
   xemacs-base  - Needed by efs.

and optionally:

   mule-base    - Needed if you want to use XEmacs with MULE.
@end example

After installing these by hand, fire up XEmacs and follow these
steps.

@enumerate 1
@item 
Choose a download site.
via menu: Tools -> Packages -> Add Download Site 
via keyb: @code{M-x customize-variable RET package-get-remote RET}
(put in the details of remote host and directory)

If the package tarballs _AND_ the package-index file are in a
local directory, you can: @code{M-x pui-add-install-directory RET}

@item 
Obtain a list of packages and display the list in a buffer named
@file{*Packages*}.
menu: Tools -> Packages -> List & Install
keyb: @code{M-x pui-list-packages RET}

XEmacs will now connect to the remote site and download the
latest package-index file.  If you see an error about the
package-index entries not being PGP signed, you can safely
ignore this because PGP has not been integrated into the XEmacs
package tools yet.

The visual package browser will then display a list of all packages.
Help information will be displayed at the very bottom of the buffer; you
may have to scroll down to see it.  You can also press @kbd{?} to get
the same help.  From this buffer, you can tell the package status by the
character in the first column:

@table @kbd
@item -
The package has not been installed.
@item *
The package has been installed, but a newer version is available.  The
current version is out-of-date.
@item +
The package has been marked for installation/update.
@end table

If there is no character in the first column, the package has been
installed and is up-to-date.

From here, you can select or unselect packages for installation using
the @key{RET} key, the @kbd{Mouse-2} button or selecting "Select" from
the (Popup) Menu.
Once you've finished selecting the packages, you can
press the @kbd{x} key (or use the menu) to actually install the
packages. Note that you will have to restart XEmacs for XEmacs to
recognize any new packages.

Key summary:

@table @kbd
@item ?
Display simple help.
@item @key{RET}
@itemx @key{Mouse-2}
Toggle between selecting and unselecting a package for installation.
@item x
Install selected packages.
@item @key{SPC}
View, in the minibuffer, additional information about the package, such
as the package date (not the build date) and the package author.  Moving 
the mouse over a package name will also do the same thing.
@item v
Toggle between verbose and non-verbose package display.
@item g
Refresh the package display.
@item q
Kill the package buffer.
@end table

Moving the mouse over a package will also cause additional information
about the package to be displayed in the minibuffer.


@item 
Choose the packages you wish to install.
mouse: Click button 2 on the package name.
 keyb: @kbd{RET} on the package name

@item 
Make sure you have everything you need.
menu: Packages -> Add Required
keyb: @kbd{r}

XEmacs will now search for packages that are required by the
ones that you have chosen to install and offer to select
those packages also.

For novices and gurus alike, this step can save your bacon.
It's easy to forget to install a critical package.

@item 
Download and install the packages.
menu: Packages -> Install/Remove Selected
keyb: @kbd{x}
@end enumerate

You can also install packages using a semi-manual interface:

@example
M-x package-get-all <return>
@end example

Enter the name of the package (e.g., @code{prog-modes}), and XEmacs
will search for the latest version and install it and any packages that
it depends upon.

@node Which Packages, Removing Packages, Automatically, Installing Packages
@comment  node-name,  next,  previous,  up
@cindex which packages
@cindex choosing packages
@heading Which Packages to Install:
This is difficult to say. When in doubt install a package. If you
administrate a big site it might be a good idea to just install
everything. A good minimal set of packages for XEmacs-latin1 would be

xemacs-base, xemacs-devel, c-support, cc-mode, debug, dired, efs,
edit-utils, fsf-compat, mail-lib, net-utils, os-utils, prog-modes,
text-modes, time

If you are using the XEmacs package tools, don't forget to do:

	Packages -> Add Required

To make sure you have everything that the packages you have chosen to
install need.

See also @ref{Available Packages} for further descriptions of the individual
packages.

@node Removing Packages, ,Which Packages, Installing Packages
@comment  node-name,  next,  previous,  up
@cindex removing packages
@cindex deleting packages
@heading Removing Packages:
Because the exact files and their locations contained in a package may
change it is recommended to remove a package first before installing a
new version. In order to facilitate removal each package contains an
@file{pgkinfo/MANIFEST.pkgname} file which list all the files belonging
to the package. 

No need to panic, you don't have to go through the
@file{pkinfo/MANIFEST.pkgname} and manually delete the files.  Instead, use
@code{M-x package-get-delete-package RET}.

Note that the interactive package tools included with XEmacs already do
this for you.

@node Building Packages, Local.rules File, Installing Packages, Packages
@comment  node-name,  next,  previous,  up
@cindex building packages
@cindex package building
@heading Building Packages:
Currently, source packages are only available via anonymous CVS.  See
@url{http://cvs.xemacs.org/} for details of checking out the
@file{xemacs-packages} module.

@subsection Prerequisites for Building Source Packages

@table @code
@item GNU cp
@item GNU install 
(or a BSD compatible install program).
@item GNU make 
(3.75 or later preferred).
@item makeinfo 
(1.68 from texinfo-3.11 or later required).
@item GNU tar
(or equivalent).
@item GNU gzip
(or equivalent).
@item A properly configured @file{Local.rules} file.
@ref{Local.rules File}.
@end table
And of course, XEmacs 21.0 or higher.

@subsection What You Can Do With Source Packages

The packages CVS sources are most useful for creating XEmacs package
tarballs for installation into your own XEmacs installations or for
distributing to others.

Supported operations from @file{make} are:

@table @code
@item all
Bytecompile all files, build and bytecompile byproduct files like
@file{auto-autoloads.el} and @file{custom-load.el}.  Create info version
of TeXinfo documentation if present.

@item bindist
Does a @code{make all} as well as create a binary package tarball in the
staging directory.

@item install
Bytecompile all files, build and bytecompile byproduct files like
@file{auto-autoloads.el} and @file{custom-load.el}.  Create info version
of TeXinfo documentation if present.  And install everything into the
staging directory.

@item srckit
Usually aliased to @code{srckit-std}.  This does a @code{make
distclean} and creates a package source tarball in the staging
directory.  This is generally only of use for package maintainers.

@item binkit
May be aliased to @code{binkit-sourceonly}, @code{binkit-sourceinfo},
@code{binkit-sourcedata}, or
@code{binkit-sourcedatainfo}. @code{sourceonly} indicates there is
nothing to install in a data directory or info directory.
@code{sourceinfo} indicates that source and info files are to be
installed.  @code{sourcedata} indicates that source and etc (data) files
are to be installed.  @code{sourcedatainfo} indicates source, etc
(data), and info files are to be installed.  A few packages have needs
beyond the basic templates so this is not yet complete.

@item dist
Runs the rules @code{srckit} followed by @code{binkit}.  This is
primarily of use by XEmacs maintainers producing files for distribution.

@item clean
Remove all built files except @file{auto-autoloads.el} and @file{custom-load.el}.

@item distclean
Remove all created files.
@end table

@node Local.rules File, Creating Packages, Building Packages, Packages
@comment  node-name,  next,  previous,  up
@cindex local.rules
@heading The Local.rules File:
This file is used when building and installing packages from source.  In
the top level of the CVS module, @file{xemacs-packages}, contains the
file, @file{Local.rules.template}.  Simply copy that to
@file{Local.rules} and edit it to suit your needs.

These are the variables in 'Local.rules' that you will need to
address. 

@table @var
@item symlink = 
Set this to 't' if you want to do a "run in place".
Setting this doesn't work well with 'make bindist'

@item XEMACS_PACKAGES =
This is where you set the normal packages that you
want to install. eg:
@example
      XEMACS_PACKAGES = xemacs-packages/xemacs-base xemacs-packages/bbdb
@end example

@item XEMACS_STAGING = $@{XEMACS_PACKAGES_BASE@}/../Packages
Set this to where you want normal packages to be
installed to.

@item PACKAGE_INDEX = package-index
If you want the package-index file to have a different
name, change this.

@item BUILD_WITHOUT_MULE =
Building from CVS defaults to building the Mule
packages.  Set this to 't' if you don't want/have Mule

@item MULE_PACKAGES =
Same as for 'XEMACS_PACKAGES' except you list the Mule
packages you want to install here. eg:
@example
      MULE_PACKAGES = mule-packages/mule-base mule-packages/skk
@end example

@item MULE_STAGING = $@{XEMACS_PACKAGES_BASE@}/../Mule-Packages
Set this to where you want Mule packages installed
to.  Note:  'make bindist' does not use this variable.

@item XEMACS = xemacs
If your XEmacs isn't in your path, change this.

@item XEMACS_NATIVE_NT =
Set this to 't' if you are building on WinNT.

@item INSTALL = install -c
The path to your BSD compatible install program.

@item TAR = tar
The path to your tar program

@item BZIP2 =
If you want bzip2 tarballs, set this.

@item MAKEINFO = makeinfo
The path to your makeinfo program
@end table


@node Creating Packages, Available Packages, Local.rules File, Packages
@comment  node-name,  next,  previous,  up
@cindex creating packages
@heading Creating Packages:
Creating a package from an existing Lisp library is not very difficult.

In addition to the Lisp libraries themselves, you need a
@file{package-info.in} file and a simple @file{Makefile}.  The rest is
done by @file{XEmacs.rules}, part of the packaging system
infrastructure.

@file{package-info.in} contains a single Lisp form like this:

@example
(name                               ; your package's name
  (standards-version 1.1
   version VERSION
   author-version AUTHOR_VERSION
   date DATE
   build-date BUILD_DATE
   maintainer MAINTAINER
   distribution xemacs              ; change to "mule" if MULE is needed
   priority high
   category CATEGORY
   dump nil
   description "description"        ; a one-line description string
   filename FILENAME
   md5sum MD5SUM
   size SIZE
   provides (feature1 feature2)     ; one for every `provides' form
   requires (REQUIRES)
   type regular
))
@end example

You must fill in the four commented lines.  The value of @code{name} is
the name of your package as an unquoted symbol.  Normally it is the name
of the main Lisp file or principal feature provided.  The allowed values
for distribution are @code{xemacs} and @code{mule}.  Write them as
unquoted symbols.  The @code{description} is a quoted Lisp string; use
the usual conventions.  The value for @code{provides} is a list of
feature symbols (written unquoted).  All of the features provided by
libraries in your package should be elements of this list.  Implementing
an automatic method for generating the @file{provides} line is
desirable, but as yet undone.

The variables in upper-case are references to variables set in the
@file{Makefile} or automatically generated.  Do not change them; they
are automatically filled in by the build process.

The remaining lines refer to implementation constants
(@code{standards-version}), or features that are unimplemented or have
been removed (@code{priority} and @code{dump}).  The @code{type} line is
not normally relevant to external maintainers; the alternate value is
@code{single-file}, which refers to packages consed up out of a number
of single-file libraries that are more or less thematically related.  An
example is @code{prog-modes}.  Single-file packages are basically for
administrative convenience, and new packages should generally be created
as regular packages.

The @file{Makefile} is quite stylized.  The idea is similar to an
@file{Imakefile} or an @code{automake} file: the complexity is hidden in
generic rules files, in this case the @file{XEmacs.rules} include file
in the top directory of the packages hierarchy.  Although a number of
facilities are available for complex libraries, most simple packages'
@file{Makefile}s contain a copyright notice, a few variable definitions,
an include for @file{XEmacs.rules}, and a couple of standard targets.

The first few @code{make} variables defined are @code{VERSION},
@code{AUTHOR_VERSION}, @code{MAINTAINER}, @code{PACKAGE},
@code{PKG_TYPE}, @code{REQUIRES}, and @code{CATEGORY}.  All but one were
described in the description of @file{package-info.in}.  The last is an
administrative grouping.  Current categories include @code{standard},
and @code{mule}.

Next, define the variable @code{ELCS}.  This contains the list of the
byte-compiled Lisp files used by the package.  These files and their
@file{.el} versions will be included in the binary package.  If there
are other files (such as extra Lisp sources or an upstream
@file{Makefile}) that are normally placed in the installed Lisp
directory, but not byte-compiled, they can be listed as the value of
@code{EXTRA_SOURCES}.

The include is simply
@example
include ../../XEmacs.rules
@end example

The standard targets follow.  These are

@example
all:: $(ELCS) auto-autoloads.elc

srckit: srckit-alias

binkit: binkit-alias
@end example

Other targets (such as Texinfo sources) may need to be added as
dependencies for the @code{all} target.  Dependencies for @code{srckit}
and @code{binkit} (that is, values for @var{srckit-alias} and
@var{binkit-alias}) are defined in @file{XEmacs.rules}.  The most useful
of these values are given in the following table.

@table @var
@item srckit-alias
Usually set to @code{srckit-std}.

@item binkit-alias
May be set to @code{binkit-sourceonly}, @code{binkit-sourceinfo},
@code{binkit-sourcedata}, or
@code{binkit-sourcedatainfo}.  @code{sourceonly} indicates there is
nothing to install in a data directory or info directory.
@code{sourceinfo} indicates that source and info files are to be
installed.  @code{sourcedata} indicates that source and etc (data) files
are to be installed.  @code{sourcedatainfo} indicates source, etc
(data), and info files are to be installed.
@end table

Data files include things like pixmaps for a package-specific toolbar,
and are normally installed in @file{etc/@var{PACKAGE_NAME}}.  A few
packages have needs beyond the basic templates.  See @file{XEmacs.rules}
or a future revision of this manual for details.

@node Available Packages,  , Creating Packages, Packages
@comment  node-name,  next,  previous,  up
@cindex available packages
@cindex packages
@heading Available Packages:
This section lists the Lisp packages that are currently available from
xemacs.org and it's mirrors.  If a particular package that you are
looking for isn't here, please send a message to the
@email{xemacs-beta@@xemacs.org, XEmacs Beta list}.

This data is up-to-date as of May 15, 2001.

@subsection Normal Packages
A very broad selection of elisp packages.

@table @file
@item Sun
Support for Sparcworks.

@item ada
Ada language support.

@item apel
A Portable Emacs Library.  Used by XEmacs MIME support.

@item auctex
Basic TeX/LaTeX support.

@item bbdb
The Big Brother Data Base

@item build
Build XEmacs using custom widgets.

@item c-support
Basic single-file add-ons for editing C code.

@item calc
Emacs calculator.

@item calendar
Calendar and diary support.

@item cc-mode
C, C++ and Java language support.

@item cookie
Spook and Yow (Zippy quotes).

@item crisp
Crisp/Brief emulation.

@item debug
GUD, gdb, dbx debugging support.

@item dired
The DIRectory EDitor is for manipulating, and running commands on
files in a directory.

@item edebug
A Lisp debugger.

@item ediff
Interface over patch.

@item edit-utils
Single file lisp packages for various XEmacs goodies.  Load this and
weed out the junk you don't want.

@item edt
DEC EDIT/EDT emulation.

@item efs
Treat files on remote systems the same as local files.

@item eicq
ICQ Client developed and tested on Linux x86; 
only supported on that platform

@item eieio
Enhanced Implementation of Emacs Interpreted Objects.

@item elib
Portable Emacs Lisp utilities library.

@item emerge
Another interface over patch.

@item eshell
Command shell implemented entirely in Emacs Lisp.

@item eterm
Terminal emulator.

@item eudc
Emacs Unified Directory Client (LDAP, PH).

@item footnote
Footnoting in mail message editing modes.

@item forms
Forms editing support (obsolete, use the built-in Widget instead).

@item frame-icon
Provide a WM icon based on major mode.

@item fsf-compat
FSF Emacs compatibility files.

@item games
Tetris, Sokoban, and Snake.

@item gnats
XEmacs bug reports.

@item gnus
The Gnus Newsreader and Mailreader.

@item hm--html-menus
HTML editing.

@item idlwave
Editing and Shell mode for the Interactive Data Language.

@item igrep
Enhanced front-end for Grep.

@item ilisp
Front-end for Inferior Lisp.

@item ispell
Spell-checking with ispell.

@item jde
Java language and development support.

@item mail-lib
Fundamental lisp files for providing email support.

@item mailcrypt
Support for messaging encryption with PGP.

@item mew
Messaging in an Emacs World.

@item mh-e
Front end support for MH.

@item mine
Minehunt.

@item misc-games
Other amusements and diversions.

@item net-utils
Miscellaneous Networking Utilities.  This is a single-file package and 
files may be deleted at will.

@item os-utils
Miscellaneous single-file O/S utilities, for printing, archiving,
compression, remote shells, etc.

@item pc
PC style interface emulation.

@item pcl-cvs
CVS frontend.

@item pcomplete
Provides programmatic completion.

@item prog-modes
Miscellaneous single-file lisp files for various programming languages.

@item ps-print-nomule
Old, but no-Mule safe ps-print.

@item psgml
Validated HTML/SGML editing.

@item reftex
Emacs support for LaTeX cross-references, citations.

@item rmail
An obsolete Emacs mailer.  If you do not already use it don't start.

@item scheme
Front-end support for Inferior Scheme.

@item semantic
Semantic bovinator.

@item sgml
SGML/Linuxdoc-SGML editing.

@item sh-script
Support for editing shell scripts.

@item slider
User interface tool.

@item sounds-au
XEmacs Sun sound files.

@item sounds-wav
XEmacs Microsoft sound files.

@item speedbar
Provides a separate frame with convenient references.

@item strokes
Mouse enhancement utility.

@item supercite
An Emacs citation tool.  Useful with all Emacs Mailers and Newsreaders.

@item texinfo
XEmacs TeXinfo support.

@item text-modes
Various single file lisp packages for editing text files.

@item textools
Single-file TeX support.

@item time
Display time & date on the modeline.

@item tm
Emacs MIME support. Not needed for Gnus >= 5.8.0

@item tooltalk
Support for building with Tooltalk.

@item tpu
DEC EDIT/TPU support.

@item vc
Version Control for Free systems.

@item vc-cc
Version Control for ClearCase.  This package will shortly be
replaced with clearcase.el

@item vhdl
Support for VHDL.

@item view-process
A Unix process browsing tool.

@item viper
VI emulation support.

@item vm
An Emacs mailer.

@item w3
A Web browser.

@item xemacs-base
Fundamental XEmacs support.  Install this unless you wish a totally
naked XEmacs.

@item xemacs-devel
XEmacs Lisp developer support.  This package contains utilities for
supporting Lisp development.  It is a single-file package so it may be 
tailored.

@item xslt-process
A minor mode for (X)Emacs which allows running an XSLT processor on a
buffer.

@item zenirc
ZENIRC IRC Client.
@end table

@subsection Mule Support (mule)

MULti-lingual Enhancement.  Support for world scripts such as
Latin, Arabic, Cyrillic, Chinese, Japanese, Greek, Hebrew etc.
To use these packages your XEmacs must be compiled with Mule
support.

@table @file
@item edict
Lisp Interface to EDICT, Kanji Dictionary.

@item egg-its
Wnn (4.2 and 6) support.  SJ3 support.  Must be installed prior to
XEmacs build.

@item leim
Quail.  Used for everything other than English and Japanese.

@item locale
Used for localized menubars (French and Japanese) and localized splash
screens (Japanese).

@item lookup
Dictionary support. (This isn't an English dictionary program)

@item mule-base
Basic Mule support.  Must be installed prior to building with Mule.

@item skk
Another Japanese Language Input Method.  Can be used without a
separate process running as a dictionary server.
@end table