--- a/man/texinfo.tex	Mon Aug 13 11:19:22 2007 +0200
+++ b/man/texinfo.tex	Mon Aug 13 11:20:41 2007 +0200
@@ -1,11 +1,7 @@
 % texinfo.tex -- TeX macros to handle Texinfo files.
+% $Id: texinfo.tex,v 1.5 1998/06/13 04:28:12 steve Exp $
 %
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{1999-09-25.10}
-%
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99
+% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98
 % Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software; you can redistribute it and/or
@@ -29,44 +25,36 @@
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   ftp://ftp.gnu.org/gnu/texinfo.tex
-%   (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
-%   ftp://texinfo.org/tex/texinfo.tex
-%   ftp://us.ctan.org/macros/texinfo/texinfo.tex
-%   (and all CTAN mirrors, finger ctan@us.ctan.org for a list).
-%   /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-% The texinfo.tex in any given Texinfo distribution could well be out
-% of date, so if that's what you're using, please check.
-% Texinfo has a small home page at http://texinfo.org/.
-%
-% Send bug reports to bug-texinfo@gnu.org.  Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem.  Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution.  For a simple
-% manual foo.texi, however, you can get away with this:
-%   tex foo.texi
-%   texindex foo.??
-%   tex foo.texi
-%   tex foo.texi
-%   dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
-% The extra runs of TeX get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages.  You can get
-% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
-
-\message{Loading texinfo [version \texinfoversion]:}
+% ftp://ftp.cs.umb.edu/pub/tex/texinfo.tex
+% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+% 
+% Send bug reports to bug-texinfo@gnu.org.
+% Please include a precise test case in each bug report,
+% including a complete document with which we can reproduce the problem.
+% 
+% Texinfo macros (with @macro) are *not* supported by texinfo.tex.  You
+% have to run makeinfo -E to expand macros first; the texi2dvi script
+% does this.
+
+
+% Make it possible to create a .fmt file just by loading this file:
+% if the underlying format is not loaded, start by loading it now.
+% Added by gildea November 1993.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+
+% This automatically updates the version number based on RCS.
+\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
+\deftexinfoversion$Revision: 1.5 $
+\message{Loading texinfo package [Version \texinfoversion]:}
 
 % If in a .fmt file, print the version number
 % and turn on active characters that we couldn't do earlier because
 % they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
+\everyjob{\message{[Texinfo version \texinfoversion]}\message{}
   \catcode`+=\active \catcode`\_=\active}
 
 % Save some parts of plain tex whose names we will redefine.
+
 \let\ptexb=\b
 \let\ptexbullet=\bullet
 \let\ptexc=\c
@@ -82,9 +70,18 @@
 \let\ptexstar=\*
 \let\ptext=\t
 
-% We never want plain's outer \+ definition in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
 
 \message{Basics,}
 \chardef\other=12
@@ -93,47 +90,18 @@
 % starts a new line in the output.
 \newlinechar = `^^J
 
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined     \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
-\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
-\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
+% Set up fixed words for English.
+\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
+\def\putwordInfo{Info}%
+\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
+\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
+\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
+\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
+\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
+\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
+\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
+\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
+\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
 
 % Ignore a token.
 %
@@ -154,35 +122,30 @@
 % since that produces some useless output on the terminal.
 %
 \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\ifx\eTeXversion\undefined
 \def\loggingall{\tracingcommands2 \tracingstats2
    \tracingpages1 \tracingoutput1 \tracinglostchars1
    \tracingmacros2 \tracingparagraphs1 \tracingrestores1
    \showboxbreadth\maxdimen\showboxdepth\maxdimen
 }%
-\else
-\def\loggingall{\tracingcommands3 \tracingstats2
-   \tracingpages1 \tracingoutput1 \tracinglostchars1
-   \tracingmacros2 \tracingparagraphs1 \tracingrestores1
-   \tracingscantokens1 \tracingassigns1 \tracingifs1
-   \tracinggroups1 \tracingnesting2
-   \showboxbreadth\maxdimen\showboxdepth\maxdimen
-}%
-\fi
 
 % For @cropmarks command.
 % Do @cropmarks to get crop marks.
-%
+% 
 \newif\ifcropmarks
 \let\cropmarks = \cropmarkstrue
 %
 % Dimensions to add cropmarks at corners.
 % Added by P. A. MacKay, 12 Nov. 1986
 %
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong  \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
+\newdimen\cornerlong \newdimen\cornerthick
+\newdimen\topandbottommargin
+\newdimen\outerhsize \newdimen\outervsize
+\cornerlong=1pc\cornerthick=.3pt        % These set size of cropmarks
+\outerhsize=7in
+%\outervsize=9.5in
+% Alternative @smallbook page size is 9.25in
+\outervsize=9.25in
+\topandbottommargin=.75in
 
 % Main output routine.
 \chardef\PAGE = 255
@@ -216,16 +179,13 @@
     \shipout\vbox{%
       \ifcropmarks \vbox to \outervsize\bgroup
         \hsize = \outerhsize
-        \vskip-\topandbottommargin
-        \vtop to0pt{%
-          \line{\ewtop\hfil\ewtop}%
-          \nointerlineskip
-          \line{%
-            \vbox{\moveleft\cornerthick\nstop}%
-            \hfill
-            \vbox{\moveright\cornerthick\nstop}%
-          }%
-          \vss}%
+        \line{\ewtop\hfil\ewtop}%
+        \nointerlineskip
+        \line{%
+          \vbox{\moveleft\cornerthick\nstop}%
+          \hfill
+          \vbox{\moveright\cornerthick\nstop}%
+        }%
         \vskip\topandbottommargin
         \line\bgroup
           \hfil % center the page within the outer (page) hsize.
@@ -243,22 +203,18 @@
         \unvbox\footlinebox
       \fi
       %
-      \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
-      %
       \ifcropmarks
           \egroup % end of \vbox\bgroup
         \hfil\egroup % end of (centering) \line\bgroup
         \vskip\topandbottommargin plus1fill minus1fill
         \boxmaxdepth = \cornerthick
-        \vbox to0pt{\vss
-          \line{%
-            \vbox{\moveleft\cornerthick\nsbot}%
-            \hfill
-            \vbox{\moveright\cornerthick\nsbot}%
-          }%
-          \nointerlineskip
-          \line{\ewbot\hfil\ewbot}%
+        \line{%
+          \vbox{\moveleft\cornerthick\nsbot}%
+          \hfill
+          \vbox{\moveright\cornerthick\nsbot}%
         }%
+        \nointerlineskip
+        \line{\ewbot\hfil\ewbot}%
       \egroup % \vbox from first cropmarks clause
       \fi
     }% end of \shipout\vbox
@@ -374,11 +330,11 @@
 %% Call \inENV within environments (after a \begingroup)
 \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
 \def\ENVcheck{%
-\ifENV\errmessage{Still within an environment; press RETURN to continue}
+\ifENV\errmessage{Still within an environment.  Type Return to continue.}
 \endgroup\fi} % This is not perfect, but it should reduce lossage
 
 % @begin foo  is the same as @foo, for now.
-\newhelp\EMsimple{Press RETURN to continue.}
+\newhelp\EMsimple{Type <Return> to continue.}
 
 \outer\def\begin{\parsearg\beginxxx}
 
@@ -437,7 +393,7 @@
 
 % @@ prints an @
 % Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
+\def\@{{\tt \char '100}}
 
 % This is turned off because it was never documented
 % and you can use @w{...} around a quote to suppress ligatures.
@@ -447,8 +403,8 @@
 %\def\'{{'}}
 
 % Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
+\def\mylbrace {{\tt \char '173}}
+\def\myrbrace {{\tt \char '175}}
 \let\{=\mylbrace
 \let\}=\myrbrace
 \begingroup
@@ -485,18 +441,6 @@
   \fi\fi
 }
 
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
 % @: forces normal size whitespace following.
 \def\:{\spacefactor=1000 }
 
@@ -594,47 +538,41 @@
 %% This method tries to make TeX break the page naturally
 %% if the depth of the box does not fit.
 %{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
+%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
 %\prevdepth=-1000pt
 %}}
 
 \def\needx#1{%
-  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % Go into vertical mode, so we don't make a big box in the middle of a
   % paragraph.
   \par
   %
-  % If the @need value is less than one line space, it's useless.
-  \dimen0 = #1\mil
-  \dimen2 = \ht\strutbox
-  \advance\dimen2 by \dp\strutbox
-  \ifdim\dimen0 > \dimen2
-    %
-    % Do a \strut just to make the height of this box be normal, so the
-    % normal leading is inserted relative to the preceding line.
-    % And a page break here is fine.
-    \vtop to #1\mil{\strut\vfil}%
-    %
-    % TeX does not even consider page breaks if a penalty added to the
-    % main vertical list is 10000 or more.  But in order to see if the
-    % empty box we just added fits on the page, we must make it consider
-    % page breaks.  On the other hand, we don't want to actually break the
-    % page after the empty box.  So we use a penalty of 9999.
-    %
-    % There is an extremely small chance that TeX will actually break the
-    % page at this \penalty, if there are no other feasible breakpoints in
-    % sight.  (If the user is using lots of big @group commands, which
-    % almost-but-not-quite fill up a page, TeX will have a hard time doing
-    % good page breaking, for example.)  However, I could not construct an
-    % example where a page broke at this \penalty; if it happens in a real
-    % document, then we can reconsider our strategy.
-    \penalty9999
-    %
-    % Back up by the size of the box, whether we did a page break or not.
-    \kern -#1\mil
-    %
-    % Do not allow a page break right after this kern.
-    \nobreak
-  \fi
+  % Don't add any leading before our big empty box, but allow a page
+  % break, since the best break might be right here.
+  \allowbreak
+  \nointerlineskip
+  \vtop to #1\mil{\vfil}%
+  %
+  % TeX does not even consider page breaks if a penalty added to the
+  % main vertical list is 10000 or more.  But in order to see if the
+  % empty box we just added fits on the page, we must make it consider
+  % page breaks.  On the other hand, we don't want to actually break the
+  % page after the empty box.  So we use a penalty of 9999.
+  %
+  % There is an extremely small chance that TeX will actually break the
+  % page at this \penalty, if there are no other feasible breakpoints in
+  % sight.  (If the user is using lots of big @group commands, which
+  % almost-but-not-quite fill up a page, TeX will have a hard time doing
+  % good page breaking, for example.)  However, I could not construct an
+  % example where a page broke at this \penalty; if it happens in a real
+  % document, then we can reconsider our strategy.
+  \penalty9999
+  %
+  % Back up by the size of the box, whether we did a page break or not.
+  \kern -#1\mil
+  %
+  % Do not allow a page break right after this kern.
+  \nobreak
 }
 
 % @br   forces paragraph break
@@ -645,19 +583,15 @@
 % We do .5em per period so that it has the same spacing in a typewriter
 % font as three actual period characters.
 %
-\def\dots{%
-  \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil minus 0.25fil
-    .\hss.\hss.%
-    \hskip 0pt plus 0.5fil minus 0.5fil
-  }%
-}
+\def\dots{\hbox to 1.5em{%
+  \hskip 0pt plus 0.25fil minus 0.25fil
+  .\hss.\hss.%
+  \hskip 0pt plus 0.5fil minus 0.5fil
+}}
 
 % @enddots{} is an end-of-sentence ellipsis.
-%
+% 
 \def\enddots{%
-  \leavevmode
   \hbox to 2em{%
     \hskip 0pt plus 0.25fil minus 0.25fil
     .\hss.\hss.\hss.%
@@ -668,7 +602,7 @@
 
 
 % @page    forces the start of a new page
-%
+
 \def\page{\par\vfill\supereject}
 
 % @exdent text....
@@ -735,50 +669,332 @@
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
 
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
+\parsearg \commentxxx}
+
+\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
 
 \let\c=\comment
 
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% We cannot implement @paragraphindent asis, though.
-% 
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
+% @paragraphindent  is defined for the Info formatting commands only.
+\let\paragraphindent=\comment
+
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+\let\chapter=\relax
+\let\unnumbered=\relax
+\let\top=\relax
+\let\unnumberedsec=\relax
+\let\unnumberedsection=\relax
+\let\unnumberedsubsec=\relax
+\let\unnumberedsubsection=\relax
+\let\unnumberedsubsubsec=\relax
+\let\unnumberedsubsubsection=\relax
+\let\section=\relax
+\let\subsec=\relax
+\let\subsubsec=\relax
+\let\subsection=\relax
+\let\subsubsection=\relax
+\let\appendix=\relax
+\let\appendixsec=\relax
+\let\appendixsection=\relax
+\let\appendixsubsec=\relax
+\let\appendixsubsection=\relax
+\let\appendixsubsubsec=\relax
+\let\appendixsubsubsection=\relax
+\let\contents=\relax
+\let\smallbook=\relax
+\let\titlepage=\relax
+}
+
+% Used in nested conditionals, where we have to parse the Texinfo source
+% and so want to turn off most commands, in case they are used
+% incorrectly.
+%
+\def\ignoremorecommands{%
+  \let\defcodeindex = \relax
+  \let\defcv = \relax
+  \let\deffn = \relax
+  \let\deffnx = \relax
+  \let\defindex = \relax
+  \let\defivar = \relax
+  \let\defmac = \relax
+  \let\defmethod = \relax
+  \let\defop = \relax
+  \let\defopt = \relax
+  \let\defspec = \relax
+  \let\deftp = \relax
+  \let\deftypefn = \relax
+  \let\deftypefun = \relax
+  \let\deftypevar = \relax
+  \let\deftypevr = \relax
+  \let\defun = \relax
+  \let\defvar = \relax
+  \let\defvr = \relax
+  \let\ref = \relax
+  \let\xref = \relax
+  \let\printindex = \relax
+  \let\pxref = \relax
+  \let\settitle = \relax
+  \let\setchapternewpage = \relax
+  \let\setchapterstyle = \relax
+  \let\everyheading = \relax
+  \let\evenheading = \relax
+  \let\oddheading = \relax
+  \let\everyfooting = \relax
+  \let\evenfooting = \relax
+  \let\oddfooting = \relax
+  \let\headings = \relax
+  \let\include = \relax
+  \let\lowersections = \relax
+  \let\down = \relax
+  \let\raisesections = \relax
+  \let\up = \relax
+  \let\set = \relax
+  \let\clear = \relax
+  \let\item = \relax
+}
+
+% Ignore @ignore ... @end ignore.
+%
+\def\ignore{\doignore{ignore}}
+
+% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+%
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\html{\doignore{html}}
+\def\menu{\doignore{menu}}
+\def\direntry{\doignore{direntry}}
+
+% Also ignore @macro ... @end macro.  The user must run texi2dvi,
+% which runs makeinfo to do macro expansion.  Ignore @unmacro, too.
+\def\macro{\doignore{macro}}
+\let\unmacro = \comment
+
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory = \comment
+
+% Ignore text until a line `@end #1'.
 %
-\def\paragraphindent{\parsearg\doparagraphindent}
-\def\doparagraphindent#1{%
-  \def\temp{#1}%
-  \ifx\temp\asisword
-  \else
-    \ifx\temp\noneword
-      \defaultparindent = 0pt
-    \else
-      \defaultparindent = #1em
+\def\doignore#1{\begingroup
+  % Don't complain about control sequences we have declared \outer.
+  \ignoresections
+  %
+  % Define a command to swallow text until we reach `@end #1'.
+  \long\def\doignoretext##1\end #1{\enddoignore}%
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \catcode32 = 10
+  %
+  % Ignore braces, too, so mismatched braces don't cause trouble.
+  \catcode`\{ = 9
+  \catcode`\} = 9
+  %
+  % And now expand that command.
+  \doignoretext
+}
+
+% What we do to finish off ignored text.
+%
+\def\enddoignore{\endgroup\ignorespaces}%
+
+\newif\ifwarnedobs\warnedobsfalse
+\def\obstexwarn{%
+  \ifwarnedobs\relax\else
+  % We need to warn folks that they may have trouble with TeX 3.0.
+  % This uses \immediate\write16 rather than \message to get newlines.
+    \immediate\write16{}
+    \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
+    \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
+    \immediate\write16{If you are running another version of TeX, relax.}
+    \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
+    \immediate\write16{  Then upgrade your TeX installation if you can.}
+    \immediate\write16{  (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
+    \immediate\write16{If you are stuck with version 3.0, run the}
+    \immediate\write16{  script ``tex3patch'' from the Texinfo distribution}
+    \immediate\write16{  to use a workaround.}
+    \immediate\write16{}
+    \global\warnedobstrue
     \fi
+}
+
+% **In TeX 3.0, setting text in \nullfont hangs tex.  For a
+% workaround (which requires the file ``dummy.tfm'' to be installed),
+% uncomment the following line:
+%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+
+% Ignore text, except that we keep track of conditional commands for
+% purposes of nesting, up to an `@end #1' command.
+%
+\def\nestedignore#1{%
+  \obstexwarn
+  % We must actually expand the ignored text to look for the @end
+  % command, so that nested ignore constructs work.  Thus, we put the
+  % text into a \vbox and then do nothing with the result.  To minimize
+  % the change of memory overflow, we follow the approach outlined on
+  % page 401 of the TeXbook: make the current font be a dummy font.
+  %
+  \setbox0 = \vbox\bgroup
+    % Don't complain about control sequences we have declared \outer.
+    \ignoresections
+    %
+    % Define `@end #1' to end the box, which will in turn undefine the
+    % @end command again.
+    \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
+    %
+    % We are going to be parsing Texinfo commands.  Most cause no
+    % trouble when they are used incorrectly, but some commands do
+    % complicated argument parsing or otherwise get confused, so we
+    % undefine them.
+    %
+    % We can't do anything about stray @-signs, unfortunately;
+    % they'll produce `undefined control sequence' errors.
+    \ignoremorecommands
+    %
+    % Set the current font to be \nullfont, a TeX primitive, and define
+    % all the font commands to also use \nullfont.  We don't use
+    % dummy.tfm, as suggested in the TeXbook, because not all sites
+    % might have that installed.  Therefore, math mode will still
+    % produce output, but that should be an extremely small amount of
+    % stuff compared to the main input.
+    %
+    \nullfont
+    \let\tenrm = \nullfont  \let\tenit = \nullfont  \let\tensl = \nullfont
+    \let\tenbf = \nullfont  \let\tentt = \nullfont  \let\smallcaps = \nullfont
+    \let\tensf = \nullfont
+    % Similarly for index fonts (mostly for their use in
+    % smallexample)
+    \let\indrm = \nullfont  \let\indit = \nullfont  \let\indsl = \nullfont
+    \let\indbf = \nullfont  \let\indtt = \nullfont  \let\indsc = \nullfont
+    \let\indsf = \nullfont
+    %
+    % Don't complain when characters are missing from the fonts.
+    \tracinglostchars = 0
+    %
+    % Don't bother to do space factor calculations.
+    \frenchspacing
+    %
+    % Don't report underfull hboxes.
+    \hbadness = 10000
+    %
+    % Do minimal line-breaking.
+    \pretolerance = 10000
+    %
+    % Do not execute instructions in @tex
+    \def\tex{\doignore{tex}}%
+}
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.  Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
+%
+\def\set{\begingroup\catcode` =10
+  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+  \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  \def\temp{#2}%
+  \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+  \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
   \fi
-  \parindent = \defaultparindent
+  \endgroup
 }
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\def\exampleindent{\parsearg\doexampleindent}
-\def\doexampleindent#1{%
-  \def\temp{#1}%
-  \ifx\temp\asisword
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
+
+% @value{foo} gets the text saved in variable foo.
+%
+\def\value{\begingroup
+  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+  \valuexxx}
+\def\valuexxx#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {\{No value for ``#1''\}}%
   \else
-    \ifx\temp\noneword
-      \lispnarrowing = 0pt
-    \else
-      \lispnarrowing = #1em
-    \fi
+    \csname SET#1\endcsname
+  \fi
+\endgroup}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+\def\ifset{\parsearg\ifsetxxx}
+\def\ifsetxxx #1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    \expandafter\ifsetfail
+  \else
+    \expandafter\ifsetsucceed
   \fi
 }
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\nestedignore{ifset}}
+\defineunmatchedend{ifset}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+\def\ifclear{\parsearg\ifclearxxx}
+\def\ifclearxxx #1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    \expandafter\ifclearsucceed
+  \else
+    \expandafter\ifclearfail
+  \fi
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\nestedignore{ifclear}}
+\defineunmatchedend{ifclear}
+
+% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
+% following, through the first @end iftex (etc.).  Make `@end iftex'
+% (etc.) valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+
+% We can't just want to start a group at @iftex (for example) and end it
+% at @end iftex, since then @set commands inside the conditional have no
+% effect (they'd get reverted at the end of the group).  So we must
+% define \Eiftex to redefine itself to be its previous value.  (We can't
+% just define it to fail again with an ``unmatched end'' error, since
+% the @ifset might be nested.)
+%
+\def\conditionalsucceed#1{%
+  \edef\temp{%
+    % Remember the current value of \E#1.
+    \let\nece{prevE#1} = \nece{E#1}%
+    %
+    % At the `@end #1', redefine \E#1 to be its previous value.
+    \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
+  }%
+  \temp
+}
+
+% We need to expand lots of \csname's, but we don't want to expand the
+% control sequences after we've constructed them.
+%
+\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
 
 % @asis just yields its argument.  Used with @table, for example.
 %
@@ -801,23 +1017,33 @@
 \def\bullet{\implicitmath\ptexbullet\implicitmath}
 \def\minus{\implicitmath-\implicitmath}
 
+\def\node{\ENVcheck\parsearg\nodezzz}
+\def\nodezzz#1{\nodexxx [#1,]}
+\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
+\let\nwnode=\node
+\let\lastnode=\relax
+
+\def\donoderef{\ifx\lastnode\relax\else
+\expandafter\expandafter\expandafter\setref{\lastnode}\fi
+\global\let\lastnode=\relax}
+
+\def\unnumbnoderef{\ifx\lastnode\relax\else
+\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
+\global\let\lastnode=\relax}
+
+\def\appendixnoderef{\ifx\lastnode\relax\else
+\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
+\global\let\lastnode=\relax}
+
 % @refill is a no-op.
 \let\refill=\relax
 
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
 % @setfilename is done at the beginning of every texinfo file.
 % So open here the files we need to have open while reading the input.
 % This makes it possible to make a .fmt file for texinfo.
 \def\setfilename{%
-   \iflinks
-     \readauxfile
-   \fi % \openindices needs to do some work in any case.
+   \readauxfile
+   \opencontents
    \openindices
    \fixbackslash  % Turn off hack to swallow `\input texinfo'.
    \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
@@ -833,197 +1059,30 @@
    \comment % Ignore the actual filename.
 }
 
-% Called from \setfilename.
-%
-\def\openindices{%
-  \newindex{cp}%
-  \newcodeindex{fn}%
-  \newcodeindex{vr}%
-  \newcodeindex{tp}%
-  \newcodeindex{ky}%
-  \newcodeindex{pg}%
-}
-
 % @bye.
 \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
 
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-\ifx\pdfoutput\undefined
-  \pdffalse
-  \let\pdfmkdest = \gobble
-  \let\pdfurl = \gobble
-  \let\endlink = \relax
-  \let\linkcolor = \relax
-  \let\pdfmakeoutlines = \relax
-\else
-  \pdftrue
-  \pdfoutput = 1
-  \input pdfcolor
-  \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}%
-    \def\imageheight{#3}%
-    \ifnum\pdftexversion < 14
-      \pdfimage
-    \else
-      \pdfximage
-    \fi
-      \ifx\empty\imagewidth\else width \imagewidth \fi
-      \ifx\empty\imageheight\else height \imageheight \fi
-      {#1.pdf}%
-    \ifnum\pdftexversion < 14 \else
-      \pdfrefximage \pdflastximage
-    \fi}
-  \def\pdfmkdest#1{\pdfdest name{#1@} xyz}
-  \def\pdfmkpgn#1{#1@}
-  \let\linkcolor = \Cyan
-  \def\endlink{\Black\pdfendlink}
-  % Adding outlines to PDF; macros for calculating structure of outlines
-  % come from Petr Olsak
-  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
-    \else \csname#1\endcsname \fi}
-  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
-    \advance\tempnum by1
-    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
-  \def\pdfmakeoutlines{{%
-    \openin 1 \jobname.toc
-    \ifeof 1\else\bgroup
-      \closein 1 
-      \indexnofonts
-      \def\tt{}
-      % thanh's hack / proper braces in bookmarks  
-      \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
-      \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
-      %
-      \def\chapentry ##1##2##3{}
-      \def\unnumbchapentry ##1##2{}
-      \def\secentry ##1##2##3##4{\advancenumber{chap##2}}
-      \def\unnumbsecentry ##1##2{}
-      \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
-      \def\unnumbsubsecentry ##1##2{}
-      \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
-      \def\unnumbsubsubsecentry ##1##2{}
-      \input \jobname.toc
-      \def\chapentry ##1##2##3{%
-        \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
-      \def\unnumbchapentry ##1##2{%
-        \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
-      \def\secentry ##1##2##3##4{%
-        \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
-      \def\unnumbsecentry ##1##2{%
-        \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
-      \def\subsecentry ##1##2##3##4##5{%
-        \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
-      \def\unnumbsubsecentry ##1##2{%
-        \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
-      \def\subsubsecentry ##1##2##3##4##5##6{%
-        \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
-      \def\unnumbsubsubsecentry ##1##2{%
-        \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
-      \input \jobname.toc
-    \egroup\fi
-  }}
-  \def\makelinks #1,{%
-    \def\params{#1}\def\E{END}%
-    \ifx\params\E
-      \let\nextmakelinks=\relax
-    \else
-      \let\nextmakelinks=\makelinks
-      \ifnum\lnkcount>0,\fi
-      \picknum{#1}%
-      \startlink attr{/Border [0 0 0]} 
-        goto name{\pdfmkpgn{\the\pgn}}%
-      \linkcolor #1%
-      \advance\lnkcount by 1%
-      \endlink
-    \fi
-    \nextmakelinks
-  }
-  \def\picknum#1{\expandafter\pn#1}
-  \def\pn#1{%
-    \def\p{#1}%
-    \ifx\p\lbrace
-      \let\nextpn=\ppn
-    \else
-      \let\nextpn=\ppnn
-      \def\first{#1}
-    \fi
-    \nextpn
-  }
-  \def\ppn#1{\pgn=#1\gobble}
-  \def\ppnn{\pgn=\first}
-  \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
-  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
-  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
-    \ifx\PP\D\let\nextsp\relax
-    \else\let\nextsp\skipspaces
-      \ifx\p\space\else\addtokens{\filename}{\PP}%
-        \advance\filenamelength by 1
-      \fi
-    \fi
-    \nextsp}
-  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
-  \ifnum\pdftexversion < 14
-    \let \startlink \pdfannotlink
-  \else
-    \let \startlink \pdfstartlink
-  \fi
-  \def\pdfurl#1{%
-    \begingroup
-      \normalturnoffactive\def\@{@}%
-      \leavevmode\Red
-      \startlink attr{/Border [0 0 0]}%
-        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
-        % #1
-    \endgroup}
-  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
-  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
-  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
-  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
-  \def\maketoks{%
-    \expandafter\poptoks\the\toksA|ENDTOKS|
-    \ifx\first0\adn0
-    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
-    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
-    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 
-    \else
-      \ifnum0=\countA\else\makelink\fi
-      \ifx\first.\let\next=\done\else
-        \let\next=\maketoks
-        \addtokens{\toksB}{\the\toksD}
-        \ifx\first,\addtokens{\toksB}{\space}\fi
-      \fi
-    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
-    \next}
-  \def\makelink{\addtokens{\toksB}%
-    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
-  \def\pdflink#1{%
-    \startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}}
-    \linkcolor #1\endlink}
-  \def\mkpgn#1{#1@} 
-  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\fi % \ifx\pdfoutput
+% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
+% \def\macroxxx#1#2 \end macro{%
+% \expandafter\gdef\macrotemp#1{#2}%
+% \endgroup}
+
+%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
+%\def\linemacroxxx#1#2 \end linemacro{%
+%\let\parsearg=\relax
+%\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
+%\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
+%\expandafter\gdef\macrotempx#1{#2}%
+%\endgroup}
+
+%\def\butfirst#1{}
 
 
 \message{fonts,}
+
 % Font-change commands.
 
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% Texinfo supports the sans serif font style, which plain TeX does not.
 % So we set up a \sf analogous to plain's \rm, etc.
 \newfam\sffam
 \def\sf{\fam=\sffam \tensf}
@@ -1089,17 +1148,22 @@
 \setfont\deftt\ttshape{10}{\magstep1}
 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
 
-% Fonts for indices, footnotes, small examples (9pt).
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
+% Fonts for indices and small examples (9pt).
+% We actually use the slanted font rather than the italic,
+% because texinfo normally uses the slanted fonts for that.
+% Do not make many font distinctions in general in the index, since they
+% aren't very useful.
+\setfont\ninett\ttshape{9}{1000}
+\setfont\indrm\rmshape{9}{1000}
+\setfont\indit\slshape{9}{1000}
+\let\indsl=\indit
+\let\indtt=\ninett
+\let\indttsl=\ninett
+\let\indsf=\indrm
+\let\indbf=\indrm
+\setfont\indsc\scshape{10}{900}
+\font\indi=cmmi9
+\font\indsy=cmsy9
 
 % Fonts for title page:
 \setfont\titlerm\rmbshape{12}{\magstep3}
@@ -1213,12 +1277,11 @@
   \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
   \resetmathfonts \setleading{15pt}}
 \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
-\def\smallfonts{%
-  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
-  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
-  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
-  \let\tenttsl=\smallttsl
-  \resetmathfonts \setleading{11pt}}
+\def\indexfonts{%
+  \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
+  \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
+  \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
+  \resetmathfonts \setleading{12pt}}
 
 % Set up the default fonts, so we can use them for creating boxes.
 %
@@ -1242,14 +1305,13 @@
 % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
 % unless the following character is such as not to need one.
 \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
-\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
 
 \let\i=\smartitalic
-\let\var=\smartslanted
-\let\dfn=\smartslanted
+\let\var=\smartitalic
+\let\dfn=\smartitalic
 \let\emph=\smartitalic
-\let\cite=\smartslanted
+\let\cite=\smartitalic
 
 \def\b#1{{\bf #1}}
 \let\strong=\b
@@ -1267,9 +1329,9 @@
 }
 \let\ttfont=\t
 \def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+\setfont\smallrm\rmshape{8}{1000}
+\font\smallsy=cmsy9
+\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
   \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
     \vbox{\hrule\kern-0.4pt
      \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
@@ -1279,9 +1341,7 @@
 %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
 
-% @file, @option are the same as @samp.
 \let\file=\samp
-\let\option=\samp
 
 % @code is a modification of @t,
 % which makes spaces the same size as normal in the surrounding text.
@@ -1316,18 +1376,20 @@
 % and arrange explicitly to hyphenate at a dash.
 %  -- rms.
 {
-  \catcode`\-=\active
-  \catcode`\_=\active
-  %
-  \global\def\code{\begingroup
-    \catcode`\-=\active \let-\codedash
-    \catcode`\_=\active \let_\codeunder
-    \codex
-  }
-  %
-  % If we end up with any active - characters when handling the index,
-  % just treat them as a normal -.
-  \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
+\catcode`\-=\active
+\catcode`\_=\active
+\catcode`\|=\active
+\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
+% The following is used by \doprintindex to insure that long function names
+% wrap around.  It is necessary for - and _ to be active before the index is
+% read from the file, as \entry parses the arguments long before \code is
+% ever called.  -- mycroft
+% _ is always active; and it shouldn't be \let = to an _ that is a
+% subscript character anyway. Then, @cindex @samp{_} (for example)
+% fails.  --karl
+\global\def\indexbreaks{%
+  \catcode`\-=\active \let-\realdash
+}
 }
 
 \def\realdash{-}
@@ -1368,55 +1430,27 @@
 \else{\tclose{\kbdfont\look}}\fi
 \else{\tclose{\kbdfont\look}}\fi}
 
-% For @url, @env, @command quotes seem unnecessary, so use \code.
+% @url.  Quotes do not seem necessary, so use \code.
 \let\url=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself.  First (mandatory) arg is the url.  Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
-  \unsepspaces
-  \pdfurl{#1}%
-  \setbox0 = \hbox{\ignorespaces #3}%
+
+% @uref (abbreviation for `urlref') takes an optional second argument
+% specifying the text to display.  First (mandatory) arg is the url.
+% Perhaps eventually put in a hypertex \special here.
+% 
+\def\uref#1{\urefxxx #1,,\finish}
+\def\urefxxx#1,#2,#3\finish{%
+  \setbox0 = \hbox{\ignorespaces #2}%
   \ifdim\wd0 > 0pt
-    \unhbox0 % third arg given, show only that
+    \unhbox0\ (\code{#1})%
   \else
-    \setbox0 = \hbox{\ignorespaces #2}%
-    \ifdim\wd0 > 0pt
-      \ifpdf
-        \unhbox0             % PDF: 2nd arg given, show only it
-      \else
-        \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
-      \fi
-    \else
-      \code{#1}% only url given, so show it
-    \fi
+    \code{#1}%
   \fi
-  \endlink
-\endgroup}
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-% 
+}
+
+% rms does not like the angle brackets --karl, 17may97.
+% So now @email is just like @uref.
 %\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
-  \def\email#1{\doemail#1,,\finish}
-  \def\doemail#1,#2,#3\finish{\begingroup
-    \unsepspaces
-    \pdfurl{mailto:#1}%
-    \setbox0 = \hbox{\ignorespaces #2}%
-    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
-    \endlink
-  \endgroup}
-\else
-  \let\email=\uref
-\fi
+\let\email=\uref
 
 % Check if we are currently using a typewriter font.  Since all the
 % Computer Modern typewriter fonts have zero interword stretch (and
@@ -1426,7 +1460,8 @@
 \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
 
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+% argument is to make the input look right: @dmn{pt} instead of
+% @dmn{}pt.
 %
 \def\dmn#1{\thinspace #1}
 
@@ -1437,14 +1472,11 @@
 % Polish suppressed-l.  --karl, 22sep96.
 %\def\l#1{{\li #1}\null}
 
-% Explicit font changes: @r, @sc, undocumented @ii.
 \def\r#1{{\rm #1}}              % roman font
+% Use of \lowercase was suggested.
 \def\sc#1{{\smallcaps#1}}       % smallcaps font
 \def\ii#1{{\it #1}}             % italic font
 
-% @acronym downcases the argument and prints in smallcaps.
-\def\acronym#1{{\smallcaps \lowercase{#1}}}
-
 % @pounds{} is a sterling sign.
 \def\pounds{{\it\$}}
 
@@ -1458,20 +1490,15 @@
 \newif\ifseenauthor
 \newif\iffinishedtitlepage
 
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
 \def\shorttitlepage{\parsearg\shorttitlepagezzz}
 \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
         \endgroup\page\hbox{}\page}
 
 \def\titlepage{\begingroup \parindent=0pt \textfonts
    \let\subtitlerm=\tenrm
+% I deinstalled the following change because \cmr12 is undefined.
+% This change was not in the ChangeLog anyway.  --rms.
+%   \let\subtitlerm=\cmr12
    \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
    %
    \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
@@ -1520,23 +1547,6 @@
    % after the title page, which we certainly don't want.
    \oldpage
    \endgroup
-   %
-   % If they want short, they certainly want long too.
-   \ifsetshortcontentsaftertitlepage
-     \shortcontents
-     \contents
-     \global\let\shortcontents = \relax
-     \global\let\contents = \relax
-   \fi
-   %
-   \ifsetcontentsaftertitlepage
-     \contents
-     \global\let\contents = \relax
-     \global\let\shortcontents = \relax
-   \fi
-   %
-   \ifpdf \pdfmakepagedesttrue \fi
-   %
    \HEADINGSon
 }
 
@@ -1550,10 +1560,10 @@
 
 \let\thispage=\folio
 
-\newtoks\evenheadline    % headline on even pages
-\newtoks\oddheadline     % headline on odd pages
-\newtoks\evenfootline    % footline on even pages
-\newtoks\oddfootline     % footline on odd pages
+\newtoks \evenheadline    % Token sequence for heading line of even pages
+\newtoks \oddheadline     % Token sequence for heading line of odd pages
+\newtoks \evenfootline    % Token sequence for footing line of even pages
+\newtoks \oddfootline     % Token sequence for footing line of odd pages
 
 % Now make Tex use those variables
 \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
@@ -1671,23 +1681,39 @@
 
 % Subroutines used in generating headings
 % Produces Day Month Year style of output.
-\def\today{%
-  \number\day\space
-  \ifcase\month
-  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
-  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
-  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
-  \fi
-  \space\number\year}
-
-% @settitle line...  specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
+\def\today{\number\day\space
+\ifcase\month\or
+January\or February\or March\or April\or May\or June\or
+July\or August\or September\or October\or November\or December\fi
+\space\number\year}
+
+% Use this if you want the Month Day, Year style of output.
+%\def\today{\ifcase\month\or
+%January\or February\or March\or April\or May\or June\or
+%July\or August\or September\or October\or November\or December\fi
+%\space\number\day, \number\year}
+
+% @settitle line...  specifies the title of the document, for headings
+% It generates no output of its own
+
+\def\thistitle{No Title}
 \def\settitle{\parsearg\settitlezzz}
 \def\settitlezzz #1{\gdef\thistitle{#1}}
 
 
 \message{tables,}
+
+% @tabs -- simple alignment
+
+% These don't work.  For one thing, \+ is defined as outer.
+% So these macros cannot even be defined.
+
+%\def\tabs{\parsearg\tabszzz}
+%\def\tabszzz #1{\settabs\+#1\cr}
+%\def\tabline{\parsearg\tablinezzz}
+%\def\tablinezzz #1{\+#1\cr}
+%\def\&{&}
+
 % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
 
 % default indentation of table text
@@ -1731,6 +1757,11 @@
   \itemindex{#1}%
   \nobreak % This prevents a break before @itemx.
   %
+  % Be sure we are not still in the middle of a paragraph.
+  %{\parskip = 0in
+  %\par
+  %}%
+  %
   % If the item text does not fit in the space we have, put it on a line
   % by itself, and do not allow a page break either before or after that
   % line.  We do not start a paragraph here because then if the next
@@ -1759,17 +1790,13 @@
     \itemxneedsnegativevskipfalse
   \else
     % The item text fits into the space.  Start a paragraph, so that the
-    % following text (if any) will end up on the same line.
+    % following text (if any) will end up on the same line.  Since that
+    % text will be indented by \tableindent, we make the item text be in
+    % a zero-width box.
     \noindent
-    % Do this with kerns and \unhbox so that if there is a footnote in
-    % the item text, it can migrate to the main vertical list and
-    % eventually be printed.
-    \nobreak\kern-\tableindent
-    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
-    \unhbox0
-    \nobreak\kern\dimen0
-    \endgroup
-    \itemxneedsnegativevskiptrue
+    \rlap{\hskip -\tableindent\box0}\ignorespaces%
+    \endgroup%
+    \itemxneedsnegativevskiptrue%
   \fi
 }
 
@@ -1780,10 +1807,9 @@
 \def\xitem{\errmessage{@xitem while not in a table}}
 \def\xitemx{\errmessage{@xitemx while not in a table}}
 
-% Contains a kludge to get @end[description] to work.
+%% Contains a kludge to get @end[description] to work
 \def\description{\tablez{\dontindex}{1}{}{}{}{}}
 
-% @table, @ftable, @vtable.
 \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
 {\obeylines\obeyspaces%
 \gdef\tablex #1^^M{%
@@ -1843,7 +1869,7 @@
 \def\itemize{\parsearg\itemizezzz}
 
 \def\itemizezzz #1{%
-  \begingroup % ended by the @end itemize
+  \begingroup % ended by the @end itemsize
   \itemizey {#1}{\Eitemize}
 }
 
@@ -2056,60 +2082,46 @@
 \multitablelinespace=0pt
 
 % Macros used to set up halign preamble:
-%
+% 
 \let\endsetuptable\relax
 \def\xendsetuptable{\endsetuptable}
 \let\columnfractions\relax
 \def\xcolumnfractions{\columnfractions}
 \newif\ifsetpercent
 
-% #1 is the part of the @columnfraction before the decimal point, which
-% is presumably either 0 or the empty string (but we don't check, we
-% just throw it away).  #2 is the decimal part, which we use as the
-% percent of \hsize for this column.
-\def\pickupwholefraction#1.#2 {%
-  \global\advance\colcount by 1
-  \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
-  \setuptable
-}
+% 2/1/96, to allow fractions to be given with more than one digit.
+\def\pickupwholefraction#1 {\global\advance\colcount by1 %
+\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
+\setuptable}
 
 \newcount\colcount
-\def\setuptable#1{%
-  \def\firstarg{#1}%
-  \ifx\firstarg\xendsetuptable
-    \let\go = \relax
+\def\setuptable#1{\def\firstarg{#1}%
+\ifx\firstarg\xendsetuptable\let\go\relax%
+\else
+  \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
   \else
-    \ifx\firstarg\xcolumnfractions
-      \global\setpercenttrue
+    \ifsetpercent
+       \let\go\pickupwholefraction   % In this case arg of setuptable
+                                     % is the decimal point before the
+                                     % number given in percent of hsize.
+                                     % We don't need this so we don't use it.
     \else
-      \ifsetpercent
-         \let\go\pickupwholefraction
-      \else
-         \global\advance\colcount by 1
-         \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
-                            % typically that is always in the input, anyway.
-         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
-      \fi
-    \fi
-    \ifx\go\pickupwholefraction
-      % Put the argument back for the \pickupwholefraction call, so
-      % we'll always have a period there to be parsed.
-      \def\go{\pickupwholefraction#1}%
-    \else
-      \let\go = \setuptable
+       \global\advance\colcount by1
+       \setbox0=\hbox{#1 }% Add a normal word space as a separator;
+                          % typically that is always in the input, anyway.
+       \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
     \fi%
-  \fi
-  \go
-}
-
-% This used to have \hskip1sp.  But then the space in a template line is
-% not enough.  That is bad.  So let's go back to just & until we
-% encounter the problem it was intended to solve again.
-% --karl, nathan@acm.org, 20apr99.
-\def\tab{&}
+  \fi%
+\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
+\fi\go}
+
+% multitable syntax
+\def\tab{&\hskip1sp\relax} % 2/2/96
+                           % tiny skip here makes sure this column space is
+                           % maintained, even if it is never used.
 
 % @multitable ... @end multitable definitions:
-%
+
 \def\multitable{\parsearg\dotable}
 \def\dotable#1{\bgroup
   \vskip\parskip
@@ -2148,15 +2160,15 @@
   % In order to keep entries from bumping into each other
   % we will add a \leftskip of \multitablecolspace to all columns after
   % the first one.
-  %
+  % 
   % If a template has been used, we will add \multitablecolspace
   % to the width of each template entry.
-  %
+  % 
   % If the user has set preamble in terms of percent of \hsize we will
   % use that dimension as the width of the column, and the \leftskip
   % will keep entries from bumping into each other.  Table will start at
   % left margin and final column will justify at right margin.
-  %
+  % 
   % Make sure we don't inherit \rightskip from the outer environment.
   \rightskip=0pt
   \ifnum\colcount=1
@@ -2187,18 +2199,15 @@
 % If so, do nothing. If not, give it an appropriate dimension based on
 % current baselineskip.
 \ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
 %% strut to put in table in case some entry doesn't have descenders,
 %% to keep lines equally spaced
 \let\multistrut = \strut
-\else
-%% FIXME: what is \box0 supposed to be?
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
 %% Test to see if parskip is larger than space between lines of
 %% table. If not, do nothing.
 %%        If so, set to same dimension as multitablelinespace.
+\else
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
 \ifdim\multitableparskip>\multitablelinespace
 \global\multitableparskip=\multitablelinespace
 \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
@@ -2211,356 +2220,6 @@
 \fi}
 
 
-\message{conditionals,}
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-  \let\chapter=\relax
-  \let\unnumbered=\relax
-  \let\top=\relax
-  \let\unnumberedsec=\relax
-  \let\unnumberedsection=\relax
-  \let\unnumberedsubsec=\relax
-  \let\unnumberedsubsection=\relax
-  \let\unnumberedsubsubsec=\relax
-  \let\unnumberedsubsubsection=\relax
-  \let\section=\relax
-  \let\subsec=\relax
-  \let\subsubsec=\relax
-  \let\subsection=\relax
-  \let\subsubsection=\relax
-  \let\appendix=\relax
-  \let\appendixsec=\relax
-  \let\appendixsection=\relax
-  \let\appendixsubsec=\relax
-  \let\appendixsubsection=\relax
-  \let\appendixsubsubsec=\relax
-  \let\appendixsubsubsection=\relax
-  \let\contents=\relax
-  \let\smallbook=\relax
-  \let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-\def\ignoremorecommands{%
-  \let\defcodeindex = \relax
-  \let\defcv = \relax
-  \let\deffn = \relax
-  \let\deffnx = \relax
-  \let\defindex = \relax
-  \let\defivar = \relax
-  \let\defmac = \relax
-  \let\defmethod = \relax
-  \let\defop = \relax
-  \let\defopt = \relax
-  \let\defspec = \relax
-  \let\deftp = \relax
-  \let\deftypefn = \relax
-  \let\deftypefun = \relax
-  \let\deftypeivar = \relax
-  \let\deftypeop = \relax
-  \let\deftypevar = \relax
-  \let\deftypevr = \relax
-  \let\defun = \relax
-  \let\defvar = \relax
-  \let\defvr = \relax
-  \let\ref = \relax
-  \let\xref = \relax
-  \let\printindex = \relax
-  \let\pxref = \relax
-  \let\settitle = \relax
-  \let\setchapternewpage = \relax
-  \let\setchapterstyle = \relax
-  \let\everyheading = \relax
-  \let\evenheading = \relax
-  \let\oddheading = \relax
-  \let\everyfooting = \relax
-  \let\evenfooting = \relax
-  \let\oddfooting = \relax
-  \let\headings = \relax
-  \let\include = \relax
-  \let\lowersections = \relax
-  \let\down = \relax
-  \let\raisesections = \relax
-  \let\up = \relax
-  \let\set = \relax
-  \let\clear = \relax
-  \let\item = \relax
-}
-
-% Ignore @ignore ... @end ignore.
-%
-\def\ignore{\doignore{ignore}}
-
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
-%
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
-
-% @dircategory CATEGORY  -- specify a category of the dir file
-% which this file should belong to.  Ignore this in TeX.
-\let\dircategory = \comment
-
-% Ignore text until a line `@end #1'.
-%
-\def\doignore#1{\begingroup
-  % Don't complain about control sequences we have declared \outer.
-  \ignoresections
-  %
-  % Define a command to swallow text until we reach `@end #1'.
-  % This @ is a catcode 12 token (that is the normal catcode of @ in
-  % this texinfo.tex file).  We change the catcode of @ below to match.
-  \long\def\doignoretext##1@end #1{\enddoignore}%
-  %
-  % Make sure that spaces turn into tokens that match what \doignoretext wants.
-  \catcode32 = 10
-  %
-  % Ignore braces, too, so mismatched braces don't cause trouble.
-  \catcode`\{ = 9
-  \catcode`\} = 9
-  %
-  % We must not have @c interpreted as a control sequence.
-  \catcode`\@ = 12
-  %
-  % Make the letter c a comment character so that the rest of the line
-  % will be ignored. This way, the document can have (for example)
-  %   @c @end ifinfo
-  % and the @end ifinfo will be properly ignored.
-  % (We've just changed @ to catcode 12.)
-  \catcode`\c = 14
-  %
-  % And now expand that command.
-  \doignoretext
-}
-
-% What we do to finish off ignored text.
-%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
-  \ifwarnedobs\relax\else
-  % We need to warn folks that they may have trouble with TeX 3.0.
-  % This uses \immediate\write16 rather than \message to get newlines.
-    \immediate\write16{}
-    \immediate\write16{WARNING: for users of Unix TeX 3.0!}
-    \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
-    \immediate\write16{If you are running another version of TeX, relax.}
-    \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
-    \immediate\write16{  Then upgrade your TeX installation if you can.}
-    \immediate\write16{  (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
-    \immediate\write16{If you are stuck with version 3.0, run the}
-    \immediate\write16{  script ``tex3patch'' from the Texinfo distribution}
-    \immediate\write16{  to use a workaround.}
-    \immediate\write16{}
-    \global\warnedobstrue
-    \fi
-}
-
-% **In TeX 3.0, setting text in \nullfont hangs tex.  For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
-  \obstexwarn
-  % We must actually expand the ignored text to look for the @end
-  % command, so that nested ignore constructs work.  Thus, we put the
-  % text into a \vbox and then do nothing with the result.  To minimize
-  % the change of memory overflow, we follow the approach outlined on
-  % page 401 of the TeXbook: make the current font be a dummy font.
-  %
-  \setbox0 = \vbox\bgroup
-    % Don't complain about control sequences we have declared \outer.
-    \ignoresections
-    %
-    % Define `@end #1' to end the box, which will in turn undefine the
-    % @end command again.
-    \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
-    %
-    % We are going to be parsing Texinfo commands.  Most cause no
-    % trouble when they are used incorrectly, but some commands do
-    % complicated argument parsing or otherwise get confused, so we
-    % undefine them.
-    %
-    % We can't do anything about stray @-signs, unfortunately;
-    % they'll produce `undefined control sequence' errors.
-    \ignoremorecommands
-    %
-    % Set the current font to be \nullfont, a TeX primitive, and define
-    % all the font commands to also use \nullfont.  We don't use
-    % dummy.tfm, as suggested in the TeXbook, because not all sites
-    % might have that installed.  Therefore, math mode will still
-    % produce output, but that should be an extremely small amount of
-    % stuff compared to the main input.
-    %
-    \nullfont
-    \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
-    \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
-    \let\tensf=\nullfont
-    % Similarly for index fonts (mostly for their use in smallexample).
-    \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
-    \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
-    \let\smallsf=\nullfont
-    %
-    % Don't complain when characters are missing from the fonts.
-    \tracinglostchars = 0
-    %
-    % Don't bother to do space factor calculations.
-    \frenchspacing
-    %
-    % Don't report underfull hboxes.
-    \hbadness = 10000
-    %
-    % Do minimal line-breaking.
-    \pretolerance = 10000
-    %
-    % Do not execute instructions in @tex
-    \def\tex{\doignore{tex}}%
-    % Do not execute macro definitions.
-    % `c' is a comment character, so the word `macro' will get cut off.
-    \def\macro{\doignore{ma}}%
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.  Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
-  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
-  \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
-  \def\temp{#2}%
-  \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
-  \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
-  \fi
-  \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-{
-  \catcode`\_ = \active
-  %
-  % We might end up with active _ or - characters in the argument if
-  % we're called from @code, as @code{@value{foo-bar_}}.  So \let any
-  % such active characters to their normal equivalents.
-  \gdef\value{\begingroup
-    \catcode`\-=12 \catcode`\_=12
-    \indexbreaks \let_\normalunderscore
-    \valuexxx}
-}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies).  Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that.  The command has to be fully expandable, since the result
-% winds up in the index file.  This means that if the variable's value
-% contains other Texinfo commands, it's almost certain it will fail
-% (although perhaps we could fix that with sufficient work to do a
-% one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    {[No value for ``#1'']}%
-  \else
-    \csname SET#1\endcsname
-  \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    \expandafter\ifsetfail
-  \else
-    \expandafter\ifsetsucceed
-  \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    \expandafter\ifclearsucceed
-  \else
-    \expandafter\ifclearfail
-  \fi
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.).  Make `@end iftex'
-% (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-
-% We can't just want to start a group at @iftex (for example) and end it
-% at @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group).  So we must
-% define \Eiftex to redefine itself to be its previous value.  (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
-%
-\def\conditionalsucceed#1{%
-  \edef\temp{%
-    % Remember the current value of \E#1.
-    \let\nece{prevE#1} = \nece{E#1}%
-    %
-    % At the `@end #1', redefine \E#1 to be its previous value.
-    \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
-  }%
-  \temp
-}
-
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
 \message{indexing,}
 % Index generation facilities
 
@@ -2576,14 +2235,12 @@
 % the file that accumulates this index.  The file's extension is foo.
 % The name of an index should be no more than 2 characters long
 % for the sake of vms.
-%
-\def\newindex#1{%
-  \iflinks
-    \expandafter\newwrite \csname#1indfile\endcsname
-    \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-  \fi
-  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
-    \noexpand\doindex{#1}}
+
+\def\newindex #1{
+\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
+\noexpand\doindex {#1}}
 }
 
 % @defindex foo  ==  \newindex{foo}
@@ -2592,37 +2249,31 @@
 
 % Define @defcodeindex, like @defindex except put all entries in @code.
 
-\def\newcodeindex#1{%
-  \iflinks
-    \expandafter\newwrite \csname#1indfile\endcsname
-    \openout \csname#1indfile\endcsname \jobname.#1
-  \fi
-  \expandafter\xdef\csname#1index\endcsname{%
-    \noexpand\docodeindex{#1}}
+\def\newcodeindex #1{
+\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
+\noexpand\docodeindex {#1}}
 }
 
 \def\defcodeindex{\parsearg\newcodeindex}
 
 % @synindex foo bar    makes index foo feed into index bar.
 % Do this instead of @defindex foo if you don't want it as a separate index.
-% The \closeout helps reduce unnecessary open files; the limit on the
-% Acorn RISC OS is a mere 16 files.
-\def\synindex#1 #2 {%
-  \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-  \expandafter\closeout\csname#1indfile\endcsname
-  \expandafter\let\csname#1indfile\endcsname=\synindexfoo
-  \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
-    \noexpand\doindex{#2}}%
+\def\synindex #1 #2 {%
+\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
+\expandafter\let\csname#1indfile\endcsname=\synindexfoo
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
+\noexpand\doindex {#2}}%
 }
 
 % @syncodeindex foo bar   similar, but put all entries made for index foo
 % inside @code.
-\def\syncodeindex#1 #2 {%
-  \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-  \expandafter\closeout\csname#1indfile\endcsname
-  \expandafter\let\csname#1indfile\endcsname=\synindexfoo
-  \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
-    \noexpand\docodeindex{#2}}%
+\def\syncodeindex #1 #2 {%
+\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
+\expandafter\let\csname#1indfile\endcsname=\synindexfoo
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
+\noexpand\docodeindex {#2}}%
 }
 
 % Define \doindex, the driver for all \fooindex macros.
@@ -2643,7 +2294,6 @@
 \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
 
 \def\indexdummies{%
-\def\ { }%
 % Take care of the plain tex accent commands.
 \def\"{\realbackslash "}%
 \def\`{\realbackslash `}%
@@ -2673,11 +2323,8 @@
 % (Must be a way to avoid doing expansion at all, and thus not have to
 % laboriously list every single command here.)
 \def\@{@}% will be @@ when we switch to @ as escape char.
-% Need these in case \tex is in effect and \{ is a \delimiter again.
-% But can't use \lbracecmd and \rbracecmd because texindex assumes
-% braces and backslashes are used only as delimiters.  
-\let\{ = \mylbrace
-\let\} = \myrbrace
+%\let\{ = \lbracecmd
+%\let\} = \rbracecmd
 \def\_{{\realbackslash _}}%
 \def\w{\realbackslash w }%
 \def\bf{\realbackslash bf }%
@@ -2688,6 +2335,7 @@
 \def\gtr{\realbackslash gtr}%
 \def\less{\realbackslash less}%
 \def\hat{\realbackslash hat}%
+%\def\char{\realbackslash char}%
 \def\TeX{\realbackslash TeX}%
 \def\dots{\realbackslash dots }%
 \def\result{\realbackslash result}%
@@ -2699,11 +2347,6 @@
 \def\copyright{\realbackslash copyright}%
 \def\tclose##1{\realbackslash tclose {##1}}%
 \def\code##1{\realbackslash code {##1}}%
-\def\uref##1{\realbackslash uref {##1}}%
-\def\url##1{\realbackslash url {##1}}%
-\def\env##1{\realbackslash env {##1}}%
-\def\command##1{\realbackslash command {##1}}%
-\def\option##1{\realbackslash option {##1}}%
 \def\dotless##1{\realbackslash dotless {##1}}%
 \def\samp##1{\realbackslash samp {##1}}%
 \def\,##1{\realbackslash ,{##1}}%
@@ -2719,16 +2362,8 @@
 \def\kbd##1{\realbackslash kbd {##1}}%
 \def\dfn##1{\realbackslash dfn {##1}}%
 \def\emph##1{\realbackslash emph {##1}}%
-\def\acronym##1{\realbackslash acronym {##1}}%
-%
-% Handle some cases of @value -- where the variable name does not
-% contain - or _, and the value does not contain any
-% (non-fully-expandable) commands.
-\let\value = \expandablevalue
-%
+\def\value##1{\realbackslash value {##1}}%
 \unsepspaces
-% Turn off macro expansion
-\turnoffmacros
 }
 
 % If an index command is used in an @example environment, any spaces
@@ -2785,12 +2420,6 @@
 %\let\tt=\indexdummyfont
 \let\tclose=\indexdummyfont
 \let\code=\indexdummyfont
-\let\url=\indexdummyfont
-\let\uref=\indexdummyfont
-\let\env=\indexdummyfont
-\let\acronym=\indexdummyfont
-\let\command=\indexdummyfont
-\let\option=\indexdummyfont
 \let\file=\indexdummyfont
 \let\samp=\indexdummyfont
 \let\kbd=\indexdummyfont
@@ -2806,24 +2435,14 @@
 % so we do not become unable to do a definition.
 
 {\catcode`\@=0 \catcode`\\=\other
- @gdef@realbackslash{\}}
+@gdef@realbackslash{\}}
 
 \let\indexbackslash=0  %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% For \ifx comparisons.
-\def\emptymacro{\empty}
-
-% Most index entries go through here, but \dosubind is the general case.
-%
-\def\doind#1#2{\dosubind{#1}{#2}\empty}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% \empty if called from \doind, as we usually are.  The main exception
-% is with defuns, which call us directly.
-%
-\def\dosubind#1#2#3{%
+
+\let\SETmarginindex=\relax %initialize!
+% workhorse for all \fooindexes
+% #1 is name of index, #2 is stuff to put there
+\def\doind #1#2{%
   % Put the index entry in the margin if desired.
   \ifx\SETmarginindex\relax\else
     \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
@@ -2834,75 +2453,48 @@
       \indexdummies % Must do this here, since \bf, etc expand at this stage
       \escapechar=`\\
       {%
-        \let\folio = 0% We will expand all macros now EXCEPT \folio.
+        \let\folio=0% We will expand all macros now EXCEPT \folio.
         \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
         % so it will be output as is; and it will print as backslash.
         %
-        \def\thirdarg{#3}%
-        %
-        % If third arg is present, precede it with space in sort key.
-        \ifx\thirdarg\emptymacro
-          \let\subentry = \empty
-        \else
-          \def\subentry{ #3}%
-        \fi
-        %
-        % First process the index entry with all font commands turned
-        % off to get the string to sort by.
-        {\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
+        % First process the index-string with all font commands turned off
+        % to get the string to sort by.
+        {\indexnofonts \xdef\indexsorttmp{#2}}%
         %
-        % Now the real index entry with the fonts.
+        % Now produce the complete index entry, with both the sort key and the
+        % original text, including any font commands.
         \toks0 = {#2}%
-        %
-        % If third (subentry) arg is present, add it to the index
-        % string.  And include a space.
-        \ifx\thirdarg\emptymacro \else
-          \toks0 = \expandafter{\the\toks0 \space #3}%
-        \fi
-        %
-        % Set up the complete index entry, with both the sort key
-        % and the original text, including any font commands.  We write
-        % three arguments to \entry to the .?? file, texindex reduces to
-        % two when writing the .??s sorted result.
         \edef\temp{%
           \write\csname#1indfile\endcsname{%
             \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
         }%
-        %
-        % If a skip is the last thing on the list now, preserve it
-        % by backing up by \lastskip, doing the \write, then inserting
-        % the skip again.  Otherwise, the whatsit generated by the
-        % \write will make \lastskip zero.  The result is that sequences
-        % like this:
-        % @end defun
-        % @tindex whatever
-        % @defun ...
-        % will have extra space inserted, because the \medbreak in the
-        % start of the @defun won't see the skip inserted by the @end of
-        % the previous defun.
-        %
-        % But don't do any of this if we're not in vertical mode.  We
-        % don't want to do a \vskip and prematurely end a paragraph.
-        %
-        % Avoid page breaks due to these extra skips, too.
-        %
-        \iflinks
-          \ifvmode
-            \skip0 = \lastskip
-            \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
-          \fi
-          %
-          \temp % do the write
-          %
-          %
-          \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
-        \fi
+        \temp
       }%
     }%
     \penalty\count255
   }%
 }
 
+\def\dosubind #1#2#3{%
+{\count10=\lastpenalty %
+{\indexdummies % Must do this here, since \bf, etc expand at this stage
+\escapechar=`\\%
+{\let\folio=0%
+\def\rawbackslashxx{\indexbackslash}%
+%
+% Now process the index-string once, with all font commands turned off,
+% to get the string to sort the index by.
+{\indexnofonts
+\xdef\temp1{#2 #3}%
+}%
+% Now produce the complete index entry.  We process the index-string again,
+% this time with font commands expanded, to get what to print in the index.
+\edef\temp{%
+\write \csname#1indfile\endcsname{%
+\realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
+\temp }%
+}\penalty\count10}}
+
 % The index entry written in the file actually looks like
 %  \entry {sortstring}{page}{topic}
 % or
@@ -2942,7 +2534,7 @@
 \def\doprintindex#1{\begingroup
   \dobreak \chapheadingskip{10000}%
   %
-  \smallfonts \rm
+  \indexfonts \rm
   \tolerance = 9500
   \indexbreaks
   %
@@ -2958,7 +2550,7 @@
     % and it loses the chapter title and the aux file entries for the
     % index.  The easiest way to prevent this problem is to make sure
     % there is some text.
-    \putwordIndexNonexistent
+    (Index is nonexistent)
   \else
     %
     % If the index file exists but is empty, then \openin leaves \ifeof
@@ -2966,7 +2558,7 @@
     % it can discover if there is anything in it.
     \read 1 to \temp
     \ifeof 1
-      \putwordIndexIsEmpty
+      (Index is empty)
     \else
       % Index files are almost Texinfo source, but we use \ as the escape
       % character.  It would be better to use @, but that's too big a change
@@ -2985,35 +2577,21 @@
 % These macros are used by the sorted index file itself.
 % Change them to control the appearance of the index.
 
-\def\initial#1{{%
-  % Some minor font changes for the special characters.
-  \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
-  %
-  % Remove any glue we may have, we'll be inserting our own.
-  \removelastskip
-  %
-  % We like breaks before the index initials, so insert a bonus.
-  \penalty -300
-  %
-  % Typeset the initial.  Making this add up to a whole number of
-  % baselineskips increases the chance of the dots lining up from column
-  % to column.  It still won't often be perfect, because of the stretch
-  % we need before each entry, but it's better.
-  %
-  % No shrink because it confuses \balancecolumns.
-  \vskip 1.67\baselineskip plus .5\baselineskip
-  \leftline{\secbf #1}%
-  \vskip .33\baselineskip plus .1\baselineskip
-  %
-  % Do our best not to break after the initial.
-  \nobreak
-}}
+% Same as \bigskipamount except no shrink.
+% \balancecolumns gets confused if there is any shrink.
+\newskip\initialskipamount \initialskipamount 12pt plus4pt
+
+\def\initial #1{%
+{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+\ifdim\lastskip<\initialskipamount
+\removelastskip \penalty-200 \vskip \initialskipamount\fi
+\line{\secbf#1\hfill}\kern 2pt\penalty10000}}
 
 % This typesets a paragraph consisting of #1, dot leaders, and then #2
 % flush to the right margin.  It is used for index and table of contents
 % entries.  The paragraph is indented by \leftskip.
 %
-\def\entry#1#2{\begingroup
+\def\entry #1#2{\begingroup
   %
   % Start a new paragraph if necessary, so our assignments below can't
   % affect previous text.
@@ -3036,15 +2614,12 @@
   %
   % \hangafter is reset to 1 (which is the value we want) at the start
   % of each paragraph, so we need not do anything with that.
-  \hangindent = 2em
+  \hangindent=2em
   %
   % When the entry text needs to be broken, just fill out the first line
   % with blank space.
   \rightskip = 0pt plus1fil
   %
-  % A bit of stretch before each entry for the benefit of balancing columns.
-  \vskip 0pt plus1pt
-  %
   % Start a ``paragraph'' for the index entry so the line breaking
   % parameters we've set above will have an effect.
   \noindent
@@ -3069,11 +2644,7 @@
     % The `\ ' here is removed by the implicit \unskip that TeX does as
     % part of (the primitive) \par.  Without it, a spurious underfull
     % \hbox ensues.
-    \ifpdf
-      \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
-    \else
-      \ #2% The page number ends the paragraph.
-    \fi
+    \ #2% The page number ends the paragraph.
   \fi%
   \par
 \endgroup}
@@ -3102,26 +2673,24 @@
 
 \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
   % Grab any single-column material above us.
-  \output = {%
-    %
+  \output = {\global\setbox\partialpage = \vbox{%
+    % 
     % Here is a possibility not foreseen in manmac: if we accumulate a
     % whole lot of material, we might end up calling this \output
     % routine twice in a row (see the doublecol-lose test, which is
     % essentially a couple of indexes with @setchapternewpage off).  In
-    % that case we just ship out what is in \partialpage with the normal
-    % output routine.  Generally, \partialpage will be empty when this
-    % runs and this will be a no-op.  See the indexspread.tex test case.
-    \ifvoid\partialpage \else
-      \onepageout{\pagecontents\partialpage}%
-    \fi
+    % that case, we must prevent the second \partialpage from
+    % simply overwriting the first, causing us to lose the page.
+    % This will preserve it until a real output routine can ship it
+    % out.  Generally, \partialpage will be empty when this runs and
+    % this will be a no-op.
+    \unvbox\partialpage
     %
-    \global\setbox\partialpage = \vbox{%
-      % Unvbox the main output page.
-      \unvbox\PAGE
-      \kern-\topskip \kern\baselineskip
-    }%
-  }%
-  \eject % run that output routine to set \partialpage
+    % Unvbox the main output page.
+    \unvbox255
+    \kern-\topskip \kern\baselineskip
+  }}%
+  \eject
   %
   % Use the double-column output routine for subsequent pages.
   \output = {\doublecolumnout}%
@@ -3149,21 +2718,14 @@
   %
   % Double the \vsize as well.  (We don't need a separate register here,
   % since nobody clobbers \vsize.)
-  \advance\vsize by -\ht\partialpage
   \vsize = 2\vsize
 }
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
 \def\doublecolumnout{%
   \splittopskip=\topskip \splitmaxdepth=\maxdepth
   % Get the available space for the double columns -- the normal
   % (undoubled) page height minus any material left over from the
   % previous page.
-  \dimen@ = \vsize
-  \divide\dimen@ by 2
-  %
+  \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
   % box0 will be the left-hand column, box2 the right.
   \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
   \onepageout\pagesofar
@@ -3172,67 +2734,42 @@
 }
 \def\pagesofar{%
   % Re-output the contents of the output page -- any previous material,
-  % followed by the two boxes we just split, in box0 and box2.
+  % followed by the two boxes we just split.
   \unvbox\partialpage
-  %
   \hsize = \doublecolumnhsize
-  \wd0=\hsize \wd2=\hsize
-  \hbox to\pagewidth{\box0\hfil\box2}%
+  \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
 }
 \def\enddoublecolumns{%
-  \output = {%
-    % Split the last of the double-column material.  Leave it on the
-    % current page, no automatic page break.
-    \balancecolumns
-    %
-    % If we end up splitting too much material for the current page,
-    % though, there will be another page break right after this \output
-    % invocation ends.  Having called \balancecolumns once, we do not
-    % want to call it again.  Therefore, reset \output to its normal
-    % definition right away.  (We hope \balancecolumns will never be
-    % called on to balance too much material, but if it is, this makes
-    % the output somewhat more palatable.)
-    \global\output = {\onepageout{\pagecontents\PAGE}}%
-  }%
-  \eject
+  \output = {\balancecolumns}\eject % split what we have
   \endgroup % started in \begindoublecolumns
   %
-  % \pagegoal was set to the doubled \vsize above, since we restarted
-  % the current page.  We're now back to normal single-column
-  % typesetting, so reset \pagegoal to the normal \vsize (after the
-  % \endgroup where \vsize got restored).
+  % Back to normal single-column typesetting, but take account of the
+  % fact that we just accumulated some stuff on the output page.
   \pagegoal = \vsize
 }
 \def\balancecolumns{%
   % Called at the end of the double column material.
-  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \setbox0 = \vbox{\unvbox255}%
   \dimen@ = \ht0
   \advance\dimen@ by \topskip
   \advance\dimen@ by-\baselineskip
-  \divide\dimen@ by 2 % target to split to
-  %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+  \divide\dimen@ by 2
   \splittopskip = \topskip
   % Loop until we get a decent breakpoint.
-  {%
-    \vbadness = 10000
-    \loop
-      \global\setbox3 = \copy0
-      \global\setbox1 = \vsplit3 to \dimen@
-    \ifdim\ht3>\dimen@
-      \global\advance\dimen@ by 1pt
-    \repeat
-  }%
-  %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+  {\vbadness=10000 \loop
+    \global\setbox3=\copy0
+    \global\setbox1=\vsplit3 to\dimen@
+    \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
+   \repeat}%
   \setbox0=\vbox to\dimen@{\unvbox1}%
   \setbox2=\vbox to\dimen@{\unvbox3}%
-  %
   \pagesofar
 }
 \catcode`\@ = \other
 
 
 \message{sectioning,}
-% Chapters, sections, etc.
+% Define chapters, sections, etc.
 
 \newcount\chapno
 \newcount\secno        \secno=0
@@ -3241,48 +2778,58 @@
 
 % This counter is funny since it counts through charcodes of letters A, B, ...
 \newcount\appendixno  \appendixno = `\@
-% \def\appendixletter{\char\the\appendixno}
-% We do the following for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-\def\appendixletter{%
-  \ifnum\appendixno=`A A%
-  \else\ifnum\appendixno=`B B%
-  \else\ifnum\appendixno=`C C%
-  \else\ifnum\appendixno=`D D%
-  \else\ifnum\appendixno=`E E%
-  \else\ifnum\appendixno=`F F%
-  \else\ifnum\appendixno=`G G%
-  \else\ifnum\appendixno=`H H%
-  \else\ifnum\appendixno=`I I%
-  \else\ifnum\appendixno=`J J%
-  \else\ifnum\appendixno=`K K%
-  \else\ifnum\appendixno=`L L%
-  \else\ifnum\appendixno=`M M%
-  \else\ifnum\appendixno=`N N%
-  \else\ifnum\appendixno=`O O%
-  \else\ifnum\appendixno=`P P%
-  \else\ifnum\appendixno=`Q Q%
-  \else\ifnum\appendixno=`R R%
-  \else\ifnum\appendixno=`S S%
-  \else\ifnum\appendixno=`T T%
-  \else\ifnum\appendixno=`U U%
-  \else\ifnum\appendixno=`V V%
-  \else\ifnum\appendixno=`W W%
-  \else\ifnum\appendixno=`X X%
-  \else\ifnum\appendixno=`Y Y%
-  \else\ifnum\appendixno=`Z Z%
-  % The \the is necessary, despite appearances, because \appendixletter is
-  % expanded while writing the .toc file.  \char\appendixno is not
-  % expandable, thus it is written literally, thus all appendixes come out
-  % with the same letter (or @) in the toc without it.
-  \else\char\the\appendixno
-  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
-  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+\def\appendixletter{\char\the\appendixno}
+
+\newwrite\contentsfile
+% This is called from \setfilename.
+\def\opencontents{\openout\contentsfile = \jobname.toc }
 
 % Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it.  @section does likewise.
-\def\thischapter{}
-\def\thissection{}
+% page headings and footings can use it.  @section does likewise
+
+\def\thischapter{} \def\thissection{}
+\def\seccheck#1{\ifnum \pageno<0
+  \errmessage{@#1 not allowed after generating table of contents}%
+\fi}
+
+\def\chapternofonts{%
+  \let\rawbackslash=\relax
+  \let\frenchspacing=\relax
+  \def\result{\realbackslash result}%
+  \def\equiv{\realbackslash equiv}%
+  \def\expansion{\realbackslash expansion}%
+  \def\print{\realbackslash print}%
+  \def\TeX{\realbackslash TeX}%
+  \def\dots{\realbackslash dots}%
+  \def\result{\realbackslash result}%
+  \def\equiv{\realbackslash equiv}%
+  \def\expansion{\realbackslash expansion}%
+  \def\print{\realbackslash print}%
+  \def\error{\realbackslash error}%
+  \def\point{\realbackslash point}%
+  \def\copyright{\realbackslash copyright}%
+  \def\tt{\realbackslash tt}%
+  \def\bf{\realbackslash bf}%
+  \def\w{\realbackslash w}%
+  \def\less{\realbackslash less}%
+  \def\gtr{\realbackslash gtr}%
+  \def\hat{\realbackslash hat}%
+  \def\char{\realbackslash char}%
+  \def\tclose##1{\realbackslash tclose{##1}}%
+  \def\code##1{\realbackslash code{##1}}%
+  \def\samp##1{\realbackslash samp{##1}}%
+  \def\r##1{\realbackslash r{##1}}%
+  \def\b##1{\realbackslash b{##1}}%
+  \def\key##1{\realbackslash key{##1}}%
+  \def\file##1{\realbackslash file{##1}}%
+  \def\kbd##1{\realbackslash kbd{##1}}%
+  % These are redefined because @smartitalic wouldn't work inside xdef.
+  \def\i##1{\realbackslash i{##1}}%
+  \def\cite##1{\realbackslash cite{##1}}%
+  \def\var##1{\realbackslash var{##1}}%
+  \def\emph##1{\realbackslash emph{##1}}%
+  \def\dfn##1{\realbackslash dfn{##1}}%
+}
 
 \newcount\absseclevel % used to calculate proper heading level
 \newcount\secbase\secbase=0 % @raise/lowersections modify this count
@@ -3354,59 +2901,59 @@
 \fi
 }
 
-% @chapter, @appendix, @unnumbered.
+
 \def\thischaptername{No Chapter Title}
 \outer\def\chapter{\parsearg\chapteryyy}
 \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{%
+\def\chapterzzz #1{\seccheck{chapter}%
 \secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
+\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
 \chapmacro {#1}{\the\chapno}%
 \gdef\thissection{#1}%
 \gdef\thischaptername{#1}%
 % We don't substitute the actual chapter name into \thischapter
 % because we don't want its macros evaluated now.
 \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
-                                  {\the\chapno}}}%
-\temp
-\donoderef
+\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp  %
+\donoderef %
 \global\let\section = \numberedsec
 \global\let\subsection = \numberedsubsec
 \global\let\subsubsection = \numberedsubsubsec
-}
+}}
 
 \outer\def\appendix{\parsearg\appendixyyy}
 \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{%
+\def\appendixzzz #1{\seccheck{appendix}%
 \secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \appendixno by 1
-\message{\putwordAppendix\space \appendixletter}%
+\global\advance \appendixno by 1 \message{Appendix \appendixletter}%
 \chapmacro {#1}{\putwordAppendix{} \appendixletter}%
 \gdef\thissection{#1}%
 \gdef\thischaptername{#1}%
 \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
-                       {\putwordAppendix{} \appendixletter}}}%
-\temp
-\appendixnoderef
+\edef\temp{{\realbackslash chapentry{\the\toks0}%
+  {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp  %
+\appendixnoderef %
 \global\let\section = \appendixsec
 \global\let\subsection = \appendixsubsec
 \global\let\subsubsection = \appendixsubsubsec
-}
+}}
 
 % @centerchap is like @unnumbered, but the heading is centered.
 \outer\def\centerchap{\parsearg\centerchapyyy}
 \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
 
-% @top is like @unnumbered.
 \outer\def\top{\parsearg\unnumberedyyy}
-
 \outer\def\unnumbered{\parsearg\unnumberedyyy}
 \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{%
+\def\unnumberedzzz #1{\seccheck{unnumbered}%
 \secno=0 \subsecno=0 \subsubsecno=0
 %
 % This used to be simply \message{#1}, but TeX fully expands the
@@ -3418,139 +2965,155 @@
 % Anyway, we don't want the fully-expanded definition of @cite to appear
 % as a result of the \message, we just want `@cite' itself.  We use
 % \the<toks register> to achieve this: TeX expands \the<toks> only once,
-% simply yielding the contents of <toks register>.  (We also do this for
-% the toc entries.)
+% simply yielding the contents of the <toks register>.
 \toks0 = {#1}\message{(\the\toks0)}%
 %
 \unnumbchapmacro {#1}%
 \gdef\thischapter{#1}\gdef\thissection{#1}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
-\temp
-\unnumbnoderef
+\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp  %
+\unnumbnoderef %
 \global\let\section = \unnumberedsec
 \global\let\subsection = \unnumberedsubsec
 \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% Sections.
+}}
+
 \outer\def\numberedsec{\parsearg\secyyy}
 \def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{%
+\def\seczzz #1{\seccheck{section}%
 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
 \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
-                                  {\the\chapno}{\the\secno}}}%
-\temp
-\donoderef
-\nobreak
-}
+\edef\temp{{\realbackslash secentry %
+{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\donoderef %
+\penalty 10000 %
+}}
 
 \outer\def\appendixsection{\parsearg\appendixsecyyy}
 \outer\def\appendixsec{\parsearg\appendixsecyyy}
 \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{%
+\def\appendixsectionzzz #1{\seccheck{appendixsection}%
 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
 \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
-                                  {\appendixletter}{\the\secno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
+\edef\temp{{\realbackslash secentry %
+{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\appendixnoderef %
+\penalty 10000 %
+}}
 
 \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
 \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{%
+\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
 \plainsecheading {#1}\gdef\thissection{#1}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsections.
+\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\unnumbnoderef %
+\penalty 10000 %
+}}
+
 \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
 \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{%
+\def\numberedsubseczzz #1{\seccheck{subsection}%
 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
 \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
-                                    {\the\chapno}{\the\secno}{\the\subsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
+\edef\temp{{\realbackslash subsecentry %
+{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\donoderef %
+\penalty 10000 %
+}}
 
 \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
 \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{%
+\def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
 \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
-                                {\appendixletter}{\the\secno}{\the\subsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
+\edef\temp{{\realbackslash subsecentry %
+{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\appendixnoderef %
+\penalty 10000 %
+}}
 
 \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
 \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{%
+\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
 \plainsubsecheading {#1}\gdef\thissection{#1}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
-                                    {\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsubsections.
+\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\unnumbnoderef %
+\penalty 10000 %
+}}
+
 \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
 \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{%
+\def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
 \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
 \subsubsecheading {#1}
   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
-  {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
+  {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
+  {\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\donoderef %
+\penalty 10000 %
+}}
 
 \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
 \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{%
+\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
 \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
 \subsubsecheading {#1}
   {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
-  {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
+  {\appendixletter}
+  {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\appendixnoderef %
+\penalty 10000 %
+}}
 
 \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
 \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{%
+\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
 \plainsubsubsecheading {#1}\gdef\thissection{#1}%
+{\chapternofonts%
 \toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
-                                    {\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
+\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\escapechar=`\\%
+\write \contentsfile \temp %
+\unnumbnoderef %
+\penalty 10000 %
+}}
 
 % These are variants which are not "outer", so they can appear in @ifinfo.
 % Actually, they should now be obsolete; ordinary section commands should work.
@@ -3579,7 +3142,8 @@
 
 % Define @majorheading, @heading and @subheading
 
-% NOTE on use of \vbox for chapter headings, section headings, and such:
+% NOTE on use of \vbox for chapter headings, section headings, and
+% such:
 %       1) We use \vbox rather than the earlier \line to permit
 %          overlong headings to fold.
 %       2) \hyphenpenalty is set to 10000 because hyphenation in a
@@ -3626,12 +3190,12 @@
 
 \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
 
-\def\CHAPPAGoff{%
+\def\CHAPPAGoff{
 \global\let\contentsalignmacro = \chappager
 \global\let\pchapsepmacro=\chapbreak
 \global\let\pagealignmacro=\chappager}
 
-\def\CHAPPAGon{%
+\def\CHAPPAGon{
 \global\let\contentsalignmacro = \chappager
 \global\let\pchapsepmacro=\chappager
 \global\let\pagealignmacro=\chappager
@@ -3685,7 +3249,7 @@
 \def\unnchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt\raggedright
-                       \rm #1\hfill}}\bigskip \par\nobreak
+                       \rm #1\hfill}}\bigskip \par\penalty 10000 %
 }
 
 \def\chfopen #1#2{\chapoddpage {\chapfonts
@@ -3696,7 +3260,7 @@
 \def\centerchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt
-                       \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+                       \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
 }
 
 \def\CHAPFopen{
@@ -3749,45 +3313,24 @@
 }
 
 
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.  We supply {\folio} at the end of the
-% argument, which will end up as the last argument to the \...entry macro.
-%
-% We open the .toc file here instead of at @setfilename or any other
-% given time so that @contents can be put in the document anywhere.
-%
-\newif\iftocfileopened
-\def\writetocentry#1{%
-  \iftocfileopened\else
-    \immediate\openout\tocfile = \jobname.toc
-    \global\tocfileopenedtrue
-  \fi
-  \iflinks \write\tocfile{#1{\folio}}\fi
-}
+\message{toc printing,}
+% Finish up the main text and prepare to read what we've written
+% to \contentsfile.
 
 \newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Finish up the main text and prepare to read what we've written
-% to \tocfile.
-%
 \def\startcontents#1{%
    % If @setchapternewpage on, and @headings double, the contents should
    % start on an odd page, unlike chapters.  Thus, we maintain
    % \contentsalignmacro in parallel with \pagealignmacro.
    % From: Torbjorn Granlund <tege@matematik.su.se>
    \contentsalignmacro
-   \immediate\closeout\tocfile
-   %
+   \immediate\closeout \contentsfile
+   \ifnum \pageno>0
+      \pageno = -1              % Request roman numbered pages.
+   \fi
    % Don't need to put `Contents' or `Short Contents' in the headline.
    % It is abundantly clear what they are.
    \unnumbchapmacro{#1}\def\thischapter{}%
-   \savepageno = \pageno
    \begingroup                  % Set up to handle contents files properly.
       \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
       % We can't do this, because then an actual ^ in a section
@@ -3795,31 +3338,20 @@
       %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
       \raggedbottom             % Worry more about breakpoints than the bottom.
       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
-      %
-      % Roman numerals for page numbers.
-      \ifnum \pageno>0 \pageno = \lastnegativepageno \fi
 }
 
 
 % Normal (long) toc.
-\def\contents{%
-   \startcontents{\putwordTOC}%
-     \openin 1 \jobname.toc
-     \ifeof 1 \else
-       \closein 1
-       \input \jobname.toc
-     \fi
-     \vfill \eject
-     \contentsalignmacro % in case @setchapternewpage odd is in effect
-     \pdfmakeoutlines
+\outer\def\contents{%
+   \startcontents{\putwordTableofContents}%
+      \input \jobname.toc
    \endgroup
-   \lastnegativepageno = \pageno
-   \pageno = \savepageno
+   \vfill \eject
 }
 
 % And just the chapters.
-\def\summarycontents{%
-   \startcontents{\putwordShortTOC}%
+\outer\def\summarycontents{%
+   \startcontents{\putwordShortContents}%
       %
       \let\chapentry = \shortchapentry
       \let\unnumbchapentry = \shortunnumberedentry
@@ -3835,23 +3367,12 @@
       \def\unnumbsubsecentry ##1##2{}
       \def\subsubsecentry ##1##2##3##4##5##6{}
       \def\unnumbsubsubsecentry ##1##2{}
-      \openin 1 \jobname.toc
-      \ifeof 1 \else
-        \closein 1
-        \input \jobname.toc
-      \fi
-     \vfill \eject
-     \contentsalignmacro % in case @setchapternewpage odd is in effect
+      \input \jobname.toc
    \endgroup
-   \lastnegativepageno = \pageno
-   \pageno = \savepageno
+   \vfill \eject
 }
 \let\shortcontents = \summarycontents
 
-\ifpdf
-  \pdfcatalog{/PageMode /UseOutlines}%
-\fi
-
 % These macros generate individual entries in the table of contents.
 % The first argument is the chapter or section name.
 % The last argument is the page number.
@@ -3862,7 +3383,7 @@
 
 % See comments in \dochapentry re vbox and related settings
 \def\shortchapentry#1#2#3{%
-  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
 }
 
 % Typeset the label for a chapter or appendix for the short contents.
@@ -3870,14 +3391,10 @@
 % We could simplify the code here by writing out an \appendixentry
 % command in the toc file for appendices, instead of using \chapentry
 % for both, but it doesn't seem worth it.
-%
-\newdimen\shortappendixwidth
-%
+\setbox0 = \hbox{\shortcontrm \putwordAppendix }
+\newdimen\shortappendixwidth \shortappendixwidth = \wd0
+
 \def\shortchaplabel#1{%
-  % Compute width of word "Appendix", may change with language.
-  \setbox0 = \hbox{\shortcontrm \putwordAppendix}%
-  \shortappendixwidth = \wd0
-  %
   % We typeset #1 in a box of constant width, regardless of the text of
   % #1, so the chapter titles will come out aligned.
   \setbox0 = \hbox{#1}%
@@ -3892,7 +3409,7 @@
 }
 
 \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
-\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}}
+\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
 
 % Sections.
 \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
@@ -3919,24 +3436,24 @@
    \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
    \begingroup
      \chapentryfonts
-     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+     \tocentry{#1}{\dopageno{#2}}%
    \endgroup
    \nobreak\vskip .25\baselineskip plus.1\baselineskip
 }
 
 \def\dosecentry#1#2{\begingroup
   \secentryfonts \leftskip=\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+  \tocentry{#1}{\dopageno{#2}}%
 \endgroup}
 
 \def\dosubsecentry#1#2{\begingroup
   \subsecentryfonts \leftskip=2\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+  \tocentry{#1}{\dopageno{#2}}%
 \endgroup}
 
 \def\dosubsubsecentry#1#2{\begingroup
   \subsubsecentryfonts \leftskip=3\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+  \tocentry{#1}{\dopageno{#2}}%
 \endgroup}
 
 % Final typesetting of a toc entry; we use the same \entry macro as for
@@ -3964,7 +3481,6 @@
 
 
 \message{environments,}
-% @foo ... @end foo.
 
 % Since these characters are used in examples, it should be an even number of
 % \tt widths. Each \tt character is 1en, so two makes it 1em.
@@ -4037,7 +3553,6 @@
   \let\!=\ptexexclam
   \let\i=\ptexi
   \let\{=\ptexlbrace
-  \let\+=\tabalign
   \let\}=\ptexrbrace
   \let\*=\ptexstar
   \let\t=\ptext
@@ -4089,8 +3604,8 @@
 % \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
 \let\nonarrowing=\relax
 
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \cartouche: draw rectangle w/rounded corners around argument
 \font\circle=lcircle10
 \newdimen\circthick
 \newdimen\cartouter\newdimen\cartinner
@@ -4117,9 +3632,9 @@
         \cartinner=\hsize \advance\cartinner by-\lskip
                           \advance\cartinner by-\rskip
         \cartouter=\hsize
-        \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+        \advance\cartouter by 18pt % allow for 3pt kerns on either
 %                                    side, and for 6pt waste from
-%                                    each corner char, and rule thickness
+%                                    each corner char
         \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
         % Flag to tell @lisp, etc., not to narrow margin.
         \let\nonarrowing=\comment
@@ -4173,52 +3688,49 @@
   \fi
 }
 
-% Define the \E... control sequence only if we are inside the particular
-% environment, so the error checking in \end will work.
+% To ending an @example-like environment, we first end the paragraph
+% (via \afterenvbreak's vertical glue), and then the group.  That way we
+% keep the zero \parskip that the environments set -- \parskip glue
+% will be inserted at the beginning of the next paragraph in the
+% document, after the environment.
 %
-% To end an @example-like environment, we first end the paragraph (via
-% \afterenvbreak's vertical glue), and then the group.  That way we keep
-% the zero \parskip that the environments set -- \parskip glue will be
-% inserted at the beginning of the next paragraph in the document, after
-% the environment.
-%
-\def\nonfillfinish{\afterenvbreak\endgroup}
-
-% @lisp: indented, narrowed, typewriter font.
+\def\nonfillfinish{\afterenvbreak\endgroup}%
+
 \def\lisp{\begingroup
   \nonfillstart
   \let\Elisp = \nonfillfinish
   \tt
-  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
-  \gobble       % eat return
+  % Make @kbd do something special, if requested.
+  \let\kbdfont\kbdexamplefont
+  \rawbackslash % have \ input char produce \ char from current font
+  \gobble
 }
 
-% @example: Same as @lisp.
-\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-
-% @small... is usually equivalent to the non-small (@smallbook
-% redefines).  We must call \example (or whatever) last in the
-% definition, since it reads the return following the @example (or
-% whatever) command.
+% Define the \E... control sequence only if we are inside the
+% environment, so the error checking in \end will work.
 %
-% This actually allows (for example) @end display inside an
-% @smalldisplay.  Too bad, but makeinfo will catch the error anyway.
+% We must call \lisp last in the definition, since it reads the
+% return following the @example (or whatever) command.
 %
-\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
-\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
-\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
-\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
-
-% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
-% Originally contributed by Pavel@xerox.
+\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
+\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
+\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
+
+% @smallexample and @smalllisp.  This is not used unless the @smallbook
+% command is given.  Originally contributed by Pavel@xerox.
+%
 \def\smalllispx{\begingroup
-  \def\Esmalllisp{\nonfillfinish\endgroup}%
-  \def\Esmallexample{\nonfillfinish\endgroup}%
-  \smallfonts
-  \lisp
+  \nonfillstart
+  \let\Esmalllisp = \nonfillfinish
+  \let\Esmallexample = \nonfillfinish
+  %
+  % Smaller fonts for small examples.
+  \indexfonts \tt
+  \rawbackslash % make \ output the \ character from the current font (tt)
+  \gobble
 }
 
-% @display: same as @lisp except keep current font.
+% This is @display; same as @lisp except use roman font.
 %
 \def\display{\begingroup
   \nonfillstart
@@ -4226,15 +3738,7 @@
   \gobble
 }
 
-% @smalldisplay (when @smallbook): @display plus smaller fonts.
-%
-\def\smalldisplayx{\begingroup
-  \def\Esmalldisplay{\nonfillfinish\endgroup}%
-  \smallfonts \rm
-  \display
-}
-
-% @format: same as @display except don't narrow margins.
+% This is @format; same as @display except don't narrow margins.
 %
 \def\format{\begingroup
   \let\nonarrowing = t
@@ -4243,27 +3747,20 @@
   \gobble
 }
 
-% @smallformat (when @smallbook): @format plus smaller fonts.
+% @flushleft (same as @format) and @flushright.
 %
-\def\smallformatx{\begingroup
-  \def\Esmallformat{\nonfillfinish\endgroup}%
-  \smallfonts \rm
-  \format
+\def\flushleft{\begingroup
+  \let\nonarrowing = t
+  \nonfillstart
+  \let\Eflushleft = \nonfillfinish
+  \gobble
 }
-
-% @flushleft (same as @format).
-%
-\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
-
-% @flushright.
-%
 \def\flushright{\begingroup
   \let\nonarrowing = t
   \nonfillstart
   \let\Eflushright = \nonfillfinish
   \advance\leftskip by 0pt plus 1fill
-  \gobble
-}
+  \gobble}
 
 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
 % and narrows the margins.
@@ -4286,11 +3783,9 @@
   \fi
 }
 
-
 \message{defuns,}
-% @defun etc.
-
-% Allow user to change definition object font (\df) internally
+% Define formatter for defuns
+% First, allow user to change definition object font (\df) internally
 \def\setdeffont #1 {\csname DEF#1\endcsname}
 
 \newskip\defbodyindent \defbodyindent=.4in
@@ -4344,16 +3839,10 @@
 %% contained text.  This is especially needed for [ and ]
 \def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
 \def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\let\ampnr = \&
+\def\ampnr{\&}
 \def\lbrb{{\bf\char`\[}}
 \def\rbrb{{\bf\char`\]}}
 
-% Active &'s sneak into the index arguments, so make sure it's defined.
-{
-  \catcode`& = 13
-  \global\let& = \ampnr
-}
-
 % First, defname, which formats the header line itself.
 % #1 should be the function name.
 % #2 should be the type of definition, such as "Function".
@@ -4363,18 +3852,20 @@
 % outside the @def...
 \dimen2=\leftskip
 \advance\dimen2 by -\defbodyindent
-\noindent
+\dimen3=\rightskip
+\advance\dimen3 by -\defbodyindent
+\noindent        %
 \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
 \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
 \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1
+\parshape 2 0in \dimen0 \defargsindent \dimen1     %
 % Now output arg 2 ("Function" or some such)
 % ending at \deftypemargin from the right margin,
 % but stuck inside a box of width 0 so it does not interfere with linebreaking
 {% Adjust \hsize to exclude the ambient margins,
 % so that \rightline will obey them.
-\advance \hsize by -\dimen2
-\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
+\advance \hsize by -\dimen2 \advance \hsize by -\dimen3
+\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
 % Make all lines underfull and no complaints:
 \tolerance=10000 \hbadness=10000
 \advance\leftskip by -\defbodyindent
@@ -4395,62 +3886,23 @@
 \def#1{\endgraf\endgroup\medbreak}%
 \def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
 \parindent=0in
-\advance\leftskip by \defbodyindent
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
 \exdentamount=\defbodyindent
 \begingroup %
 \catcode 61=\active % 61 is `='
 \obeylines\activeparens\spacesplit#3}
 
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence for consecutive fns (which we define).
-% #3 is the control sequence to call to resume processing.
-% #4, delimited by the space, is the class name.
-%
-\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
+\def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
 \medbreak %
 % Define the end token that this defining construct specifies
 % so that it will exit this group.
 \def#1{\endgraf\endgroup\medbreak}%
 \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
 \parindent=0in
-\advance\leftskip by \defbodyindent
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
 \exdentamount=\defbodyindent
 \begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
 
-% Used for @deftypemethod and @deftypeivar.
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence for consecutive fns (which we define).
-% #3 is the control sequence to call to resume processing.
-% #4, delimited by a space, is the class name.
-% #5 is the method's return type.
-%
-\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV
-  \medbreak
-  \def#1{\endgraf\endgroup\medbreak}%
-  \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
-  \parindent=0in
-  \advance\leftskip by \defbodyindent
-  \exdentamount=\defbodyindent
-  \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
-
-% Used for @deftypeop.  The change from \deftypemethparsebody is an
-% extra argument at the beginning which is the `category', instead of it
-% being the hardwired string `Method' or `Instance Variable'.  We have
-% to account for this both in the \...x definition and in parsing the
-% input at hand.  Thus also need a control sequence (passed as #5) for
-% the \E... definition to assign the category name to.
-% 
-\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV
-  \medbreak
-  \def#1{\endgraf\endgroup\medbreak}%
-  \def#2##1 ##2 ##3 {%
-    \def#4{##1}%
-    \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
-  \parindent=0in
-  \advance\leftskip by \defbodyindent
-  \exdentamount=\defbodyindent
-  \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}}
-
 \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
 \medbreak %
 % Define the end token that this defining construct specifies
@@ -4459,7 +3911,7 @@
 \def#2##1 ##2 {\def#4{##1}%
 \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
 \parindent=0in
-\advance\leftskip by \defbodyindent
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
 \exdentamount=\defbodyindent
 \begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
 
@@ -4474,7 +3926,7 @@
 \def#1{\endgraf\endgroup\medbreak}%
 \def#2{\begingroup\obeylines\spacesplit#3}%
 \parindent=0in
-\advance\leftskip by \defbodyindent
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
 \exdentamount=\defbodyindent
 \begingroup %
 \catcode 61=\active %
@@ -4491,7 +3943,7 @@
   \def#1{\endgraf\endgroup\medbreak}%
   \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
   \parindent=0in
-  \advance\leftskip by \defbodyindent
+  \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
   \exdentamount=\defbodyindent
   \begingroup\obeylines
 }
@@ -4536,7 +3988,7 @@
 \def#2##1 ##2 {\def#4{##1}%
 \begingroup\obeylines\spacesplit{#3{##2}}}%
 \parindent=0in
-\advance\leftskip by \defbodyindent
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
 \exdentamount=\defbodyindent
 \begingroup\obeylines\spacesplit{#3{#5}}}
 
@@ -4560,17 +4012,16 @@
 % First, define the processing that is wanted for arguments of \defun
 % Use this to expand the args and terminate the paragraph they make up
 
-\def\defunargs#1{\functionparens \sl
+\def\defunargs #1{\functionparens \sl
 % Expand, preventing hyphenation at `-' chars.
 % Note that groups don't affect changes in \hyphenchar.
-% Set the font temporarily and use \font in case \setfont made \tensl a macro.
-{\tensl\hyphenchar\font=0}%
+\hyphenchar\tensl=0
 #1%
-{\tensl\hyphenchar\font=45}%
+\hyphenchar\tensl=45
 \ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
 \interlinepenalty=10000
 \advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
+\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
 }
 
 \def\deftypefunargs #1{%
@@ -4581,7 +4032,7 @@
 \tclose{#1}% avoid \code because of side effects on active chars
 \interlinepenalty=10000
 \advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
+\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
 }
 
 % Do complete processing of one @defun or @defunx line already parsed.
@@ -4600,7 +4051,7 @@
 \def\defun{\defparsebody\Edefun\defunx\defunheader}
 
 \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDeffunc}%
+\begingroup\defname {#1}{Function}%
 \defunargs {#2}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
 }
@@ -4614,7 +4065,7 @@
 % #1 is the data type, #2 the name, #3 the args.
 \def\deftypefunheaderx #1#2 #3\relax{%
 \doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
 \deftypefunargs {#3}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
 }
@@ -4645,7 +4096,7 @@
 \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
 
 \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefmac}%
+\begingroup\defname {#1}{Macro}%
 \defunargs {#2}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
 }
@@ -4655,77 +4106,53 @@
 \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
 
 \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefspec}%
+\begingroup\defname {#1}{Special Form}%
 \defunargs {#2}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
 }
 
-% @defop CATEGORY CLASS OPERATION ARG...
-%
+% This definition is run if you use @defunx
+% anywhere other than immediately after a @defun or @defunx.
+
+\def\deffnx #1 {\errmessage{@deffnx in invalid context}}
+\def\defunx #1 {\errmessage{@defunx in invalid context}}
+\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
+\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
+\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
+\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
+
+% @defmethod, and so on
+
+% @defop {Funny Method} foo-class frobnicate argument
+
 \def\defop #1 {\def\defoptype{#1}%
 \defopparsebody\Edefop\defopx\defopheader\defoptype}
-%
-\def\defopheader#1#2#3{%
-\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
+
+\def\defopheader #1#2#3{%
+\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
+\begingroup\defname {#2}{\defoptype{} on #1}%
 \defunargs {#3}\endgroup %
 }
 
-% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
-%
-\def\deftypeop #1 {\def\deftypeopcategory{#1}%
-  \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
-                       \deftypeopcategory}
-%
-% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
-\def\deftypeopheader#1#2#3#4{%
-  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{\defheaderxcond#2\relax$$$#3}
-            {\deftypeopcategory\ \putwordon\ \code{#1}}%
-    \deftypefunargs{#4}%
-  \endgroup
-}
-
-% @deftypemethod CLASS TYPE METHOD ARG...
+% @deftypemethod foo-class return-type foo-method args
 %
 \def\deftypemethod{%
-  \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+  \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
 %
 % #1 is the class name, #2 the data type, #3 the method name, #4 the args.
 \def\deftypemethodheader#1#2#3#4{%
-  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
-    \deftypefunargs{#4}%
-  \endgroup
-}
-
-% @deftypeivar CLASS TYPE VARNAME
-%
-\def\deftypeivar{%
-  \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
-%
-% #1 is the class name, #2 the data type, #3 the variable name.
-\def\deftypeivarheader#1#2#3{%
-  \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
-  \begingroup
-    \defname{#3}{\putwordInstanceVariableof\ \code{#1}}%
-    \defvarargs{#3}%
-  \endgroup
+  \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
 }
 
 % @defmethod == @defop Method
-%
+
 \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-%
-% #1 is the class name, #2 the method name, #3 the args.
-\def\defmethodheader#1#2#3{%
-  \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{#2}{\putwordMethodon\ \code{#1}}%
-    \defunargs{#3}%
-  \endgroup
+
+\def\defmethodheader #1#2#3{%
+\dosubind {fn}{\code{#2}}{on #1}% entry in function index
+\begingroup\defname {#2}{Method on #1}%
+\defunargs {#3}\endgroup %
 }
 
 % @defcv {Class Option} foo-class foo-flag
@@ -4734,30 +4161,37 @@
 \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
 
 \def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
+\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
+\begingroup\defname {#2}{\defcvtype{} of #1}%
 \defvarargs {#3}\endgroup %
 }
 
-% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
-%
+% @defivar == @defcv {Instance Variable}
+
 \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-%
-\def\defivarheader#1#2#3{%
-  \dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
-  \begingroup
-    \defname{#2}{\putwordInstanceVariableof\ #1}%
-    \defvarargs{#3}%
-  \endgroup
+
+\def\defivarheader #1#2#3{%
+\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
+\begingroup\defname {#2}{Instance Variable of #1}%
+\defvarargs {#3}\endgroup %
 }
 
-% @defvar
+% These definitions are run if you use @defmethodx, etc.,
+% anywhere other than immediately after a @defmethod, etc.
+
+\def\defopx #1 {\errmessage{@defopx in invalid context}}
+\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
+\def\defcvx #1 {\errmessage{@defcvx in invalid context}}
+\def\defivarx #1 {\errmessage{@defivarx in invalid context}}
+
+% Now @defvar
+
 % First, define the processing that is wanted for arguments of @defvar.
 % This is actually simple: just print them in roman.
 % This must expand the args and terminate the paragraph they make up
 \def\defvarargs #1{\normalparens #1%
 \interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak}
+\endgraf\penalty 10000\vskip -\parskip\penalty 10000}
 
 % @defvr Counter foo-count
 
@@ -4771,7 +4205,7 @@
 \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
 
 \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefvar}%
+\begingroup\defname {#1}{Variable}%
 \defvarargs {#2}\endgroup %
 }
 
@@ -4780,7 +4214,7 @@
 \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
 
 \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefopt}%
+\begingroup\defname {#1}{User Option}%
 \defvarargs {#2}\endgroup %
 }
 
@@ -4792,9 +4226,9 @@
 % is actually part of the data type, which should not be put into the index.
 \def\deftypevarheader #1#2{%
 \dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
 \interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
+\endgraf\penalty 10000\vskip -\parskip\penalty 10000
 \endgroup}
 \def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
 
@@ -4805,9 +4239,18 @@
 \def\deftypevrheader #1#2#3{\dovarind#3 \relax%
 \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
 \interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
+\endgraf\penalty 10000\vskip -\parskip\penalty 10000
 \endgroup}
 
+% This definition is run if you use @defvarx
+% anywhere other than immediately after a @defvar or @defvarx.
+
+\def\defvrx #1 {\errmessage{@defvrx in invalid context}}
+\def\defvarx #1 {\errmessage{@defvarx in invalid context}}
+\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
+\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
+\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
+
 % Now define @deftp
 % Args are printed in bold, a slight difference from @defvar.
 
@@ -4820,394 +4263,51 @@
 \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
 \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
 
-% These definitions are used if you use @defunx (etc.)
-% anywhere other than immediately after a @defun or @defunx.
-% 
-\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
-\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
-\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
-\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
-\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\defopx#1 {\errmessage{@defopx in invalid context}}
-\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
-\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
-\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
-\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
-\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
-\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
-\def\defunx#1 {\errmessage{@defunx in invalid context}}
-\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
-\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scanmacro#1{%
-   \begingroup \newlinechar`\^^M
-   % Undo catcode changes of \startcontents and \doprintindex
-   \catcode`\@=0 \catcode`\\=12 \escapechar=`\@
-   % Append \endinput to make sure that TeX does not see the ending newline.
-   \toks0={#1\endinput}%
-   \immediate\openout\macscribble=\jobname.tmp
-   \immediate\write\macscribble{\the\toks0}%
-   \immediate\closeout\macscribble
-   \let\xeatspaces\eatspaces
-   \input \jobname.tmp
-   \endgroup
-}
-\else
-\def\scanmacro#1{%
-\begingroup \newlinechar`\^^M
-% Undo catcode changes of \startcontents and \doprintindex
-\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
-\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
-\fi
-
-\newcount\paramno   % Count of parameters
-\newtoks\macname    % Macro name
-\newif\ifrecursive  % Is it recursive?
-\def\macrolist{}    % List of all defined macros in the form
-                    % \do\macro1\do\macro2...
-
-% Utility routines.
-% Thisdoes \let #1 = #2, except with \csnames.
-\def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=12\catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by  making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\macrobodyctxt{%
-  \catcode`\~=12
-  \catcode`\^=12
-  \catcode`\_=12
-  \catcode`\|=12
-  \catcode`\<=12
-  \catcode`\>=12
-  \catcode`\+=12
-  \catcode`\{=12
-  \catcode`\}=12
-  \catcode`\@=12
-  \catcode`\^^M=12
-  \usembodybackslash}
-
-\def\macroargctxt{%
-  \catcode`\~=12
-  \catcode`\^=12
-  \catcode`\_=12
-  \catcode`\|=12
-  \catcode`\<=12
-  \catcode`\>=12
-  \catcode`\+=12
-  \catcode`\@=12
-  \catcode`\\=12}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
-  \getargs{#1}%           now \macname is the macname and \argl the arglist
-  \ifx\argl\empty       % no arguments
-     \paramno=0%
-  \else
-     \expandafter\parsemargdef \argl;%
-  \fi
-  \if1\csname ismacro.\the\macname\endcsname
-     \message{Warning: redefining \the\macname}%
-  \else
-     \expandafter\ifx\csname \the\macname\endcsname \relax
-     \else \errmessage{The name \the\macname\space is reserved}\fi
-     \global\cslet{macsave.\the\macname}{\the\macname}%
-     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
-     % Add the macroname to \macrolist
-     \toks0 = \expandafter{\macrolist\do}%
-     \xdef\macrolist{\the\toks0
-       \expandafter\noexpand\csname\the\macname\endcsname}%
-  \fi
-  \begingroup \macrobodyctxt
-  \ifrecursive \expandafter\parsermacbody
-  \else \expandafter\parsemacbody
-  \fi}
-
-\def\unmacro{\parsearg\unmacroxxx}
-\def\unmacroxxx#1{%
-  \if1\csname ismacro.#1\endcsname
-    \global\cslet{#1}{macsave.#1}%
-    \global\expandafter\let \csname ismacro.#1\endcsname=0%
-    % Remove the macro name from \macrolist
-    \begingroup
-      \edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
-      \def\do##1{%
-        \def\tempb{##1}%
-        \ifx\tempa\tempb
-          % remove this
-        \else
-          \toks0 = \expandafter{\newmacrolist\do}%
-          \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
-        \fi}%
-      \def\newmacrolist{}%
-      % Execute macro list to define \newmacrolist
-      \macrolist
-      \global\let\macrolist\newmacrolist
-    \endgroup
-  \else
-    \errmessage{Macro #1 not defined}%
-  \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list.  Set up \paramno and \paramlist
-% so \defmacro knows what to do.  Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX:  let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
-        \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
-  \if#1;\let\next=\relax
-  \else \let\next=\parsemargdefxxx
-    \advance\paramno by 1%
-    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
-        {\xeatspaces{\hash\the\paramno}}%
-    \edef\paramlist{\paramlist\hash\the\paramno,}%
-  \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
-  \let\hash=##% convert placeholders to macro parameter chars
-  \ifrecursive
-    \ifcase\paramno
-    % 0
-      \expandafter\xdef\csname\the\macname\endcsname{%
-        \noexpand\scanmacro{\temp}}%
-    \or % 1
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \noexpand\braceorline
-         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
-      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
-         \egroup\noexpand\scanmacro{\temp}}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-        \csname\the\macname xxx\endcsname
-          \paramlist{\egroup\noexpand\scanmacro{\temp}}%
-    \fi
-  \else
-    \ifcase\paramno
-    % 0
-      \expandafter\xdef\csname\the\macname\endcsname{%
-        \noexpand\norecurse{\the\macname}%
-        \noexpand\scanmacro{\temp}\egroup}%
-    \or % 1
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \noexpand\braceorline
-         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
-      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
-        \egroup
-        \noexpand\norecurse{\the\macname}%
-        \noexpand\scanmacro{\temp}\egroup}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \expandafter\noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-      \csname\the\macname xxx\endcsname
-      \paramlist{%
-          \egroup
-          \noexpand\norecurse{\the\macname}%
-          \noexpand\scanmacro{\temp}\egroup}%
-    \fi
-  \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {.  If so it reads up to the closing }, if not, it reads the whole
-% line.  Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
-  \ifx\nchar\bgroup\else
-    \expandafter\parsearg
-  \fi \next}
-
-% We mant to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
-  \edef\next{\macrolist}\expandafter\endgroup\next}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign.  Just make them active and then expand them all to nothing.
-\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{\ignoreactivespaces
-\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
-           \expandafter\noexpand\csname#2\endcsname}%
-\expandafter\endgroup\next}
-
-
-\message{cross references,}
-% @xref etc.
-
-\newwrite\auxfile
-
-\newif\ifhavexrefs    % True if xref values are known.
+% This definition is run if you use @deftpx, etc
+% anywhere other than immediately after a @deftp, etc.
+
+\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+
+
+\message{cross reference,}
+% Define cross-reference macros
+\newwrite \auxfile
+
+\newif\ifhavexrefs  % True if xref values are known.
 \newif\ifwarnedxrefs  % True if we warned once that they aren't known.
 
-% @inforef is relatively simple.
+% @inforef is simple.
 \def\inforef #1{\inforefzzz #1,,,,**}
 \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
   node \samp{\ignorespaces#1{}}}
 
-% @node's job is to define \lastnode.
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\relax
-
-% The sectioning commands (@chapter, etc.) call these.
-\def\donoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}%
-      {Ysectionnumberandtype}%
-    \global\let\lastnode=\relax
-  \fi
-}
-\def\unnumbnoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
-    \global\let\lastnode=\relax
-  \fi
-}
-\def\appendixnoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}%
-      {Yappendixletterandtype}%
-    \global\let\lastnode=\relax
-  \fi
-}
-
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
-% NAME-title, NAME-pg, and NAME-SNT.  Called from \foonoderef.  We have
-% to set \indexdummies so commands such as @code in a section title
-% aren't expanded.  It would be nicer not to expand the titles in the
-% first place, but there's so many layers that that is hard to do.
-%
-\def\setref#1#2{{%
-  \indexdummies
-  \pdfmkdest{#1}%
-  \dosetq{#1-title}{Ytitle}%
-  \dosetq{#1-pg}{Ypagenumber}%
-  \dosetq{#1-snt}{#2}%
-}}
-
-% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual.  All but the node name can be omitted.
+% \setref{foo} defines a cross-reference point named foo.
+
+\def\setref#1{%
+\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-pg}{Ypagenumber}%
+\dosetq{#1-snt}{Ysectionnumberandtype}}
+
+\def\unnumbsetref#1{%
+\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-pg}{Ypagenumber}%
+\dosetq{#1-snt}{Ynothing}}
+
+\def\appendixsetref#1{%
+\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-pg}{Ypagenumber}%
+\dosetq{#1-snt}{Yappendixletterandtype}}
+
+% \xref, \pxref, and \ref generate cross-references to specified points.
+% For \xrefX, #1 is the node name, #2 the name of the Info
+% cross-reference, #3 the printed node name, #4 the name of the Info
+% file, #5 the name of the printed manual.  All but the node name can be
+% omitted.
 %
 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
 \def\ref#1{\xrefX[#1,,,,,,,]}
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
-  \unsepspaces
   \def\printedmanual{\ignorespaces #5}%
   \def\printednodename{\ignorespaces #3}%
   \setbox1=\hbox{\printedmanual}%
@@ -5220,7 +4320,7 @@
     \else
       % Use the actual chapter/section title appear inside
       % the square brackets.  Use the real section title if we have it.
-      \ifdim \wd1 > 0pt
+      \ifdim \wd1>0pt%
         % It is in another manual, so we don't have it.
         \def\printednodename{\ignorespaces #1}%
       \else
@@ -5241,54 +4341,27 @@
   % are best written with fairly long node names, containing hyphens, this
   % is a loss.  Therefore, we give the text of the node name again, so it
   % is as if TeX is seeing it for the first time.
-  \ifpdf
-    \leavevmode
-    \getfilename{#4}%
-    \ifnum\filenamelength>0
-      \startlink attr{/Border [0 0 0]}%
-        goto file{\the\filename.pdf} name{#1@}%
-    \else
-      \startlink attr{/Border [0 0 0]}%
-        goto name{#1@}%
-    \fi
-    \linkcolor
-  \fi
-  %
   \ifdim \wd1 > 0pt
-    \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
+    \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
   \else
     % _ (for example) has to be the character _ for the purposes of the
     % control sequence corresponding to the node, but it has to expand
     % into the usual \leavevmode...\vrule stuff for purposes of
     % printing. So we \turnoffactive for the \refx-snt, back on for the
     % printing, back off for the \refx-pg.
-    {\normalturnoffactive
-     % Only output a following space if the -snt ref is nonempty; for
-     % @unnumbered and @anchor, it won't be.
-     \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
-     \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
-    }%
-    % [mynode],
-    [\printednodename],\space
-    % page 3
+    {\turnoffactive \refx{#1-snt}{}}%
+    \space [\printednodename],\space
     \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
   \fi
-  \endlink
 \endgroup}
 
 % \dosetq is the interface for calls from other macros
 
-% Use \normalturnoffactive so that punctuation chars such as underscore
-% and backslash work in node names.  (\turnoffactive doesn't do \.)
-\def\dosetq#1#2{%
-  {\let\folio=0%
-   \normalturnoffactive
-   \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
-   \iflinks
-     \next
-   \fi
-  }%
-}
+% Use \turnoffactive so that punctuation chars such as underscore
+% work in node names.
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive
+\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
+\next}}
 
 % \internalsetq {foo}{page} expands into
 % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
@@ -5340,14 +4413,12 @@
   \expandafter\ifx\csname X#1\endcsname\relax
     % If not defined, say something at least.
     \angleleft un\-de\-fined\angleright
-    \iflinks
-      \ifhavexrefs
-        \message{\linenumber Undefined cross reference `#1'.}%
-      \else
-        \ifwarnedxrefs\else
-          \global\warnedxrefstrue
-          \message{Cross reference values unknown; you must run TeX again.}%
-        \fi
+    \ifhavexrefs
+      \message{\linenumber Undefined cross reference `#1'.}%
+    \else
+      \ifwarnedxrefs\else
+        \global\warnedxrefstrue
+        \message{Cross reference values unknown; you must run TeX again.}%
       \fi
     \fi
   \else
@@ -5358,7 +4429,7 @@
 }
 
 % This is the macro invoked by entries in the aux file.
-%
+% 
 \def\xrdef#1{\begingroup
   % Reenable \ as an escape while reading the second argument.
   \catcode`\\ = 0
@@ -5421,7 +4492,8 @@
   \catcode`\$=\other
   \catcode`\#=\other
   \catcode`\&=\other
-  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  % `\+ does not work, so use 43.
+  \catcode43=\other
   % Make the characters 128-255 be printing characters
   {%
     \count 1=128
@@ -5510,8 +4582,6 @@
   \xspaceskip\z@skip
   \parindent\defaultparindent
   %
-  \smallfonts \rm
-  %
   % Hang the footnote text off the number.
   \hang
   \textindent{\thisfootno}%
@@ -5526,7 +4596,7 @@
   \else\let\next\f@t\fi \next}
 \def\f@@t{\bgroup\aftergroup\@foot\let\next}
 \def\f@t#1{#1\@foot}
-\def\@foot{\strut\par\egroup}
+\def\@foot{\strut\egroup}
 
 }%end \catcode `\@=11
 
@@ -5585,25 +4655,23 @@
 
 % @image.  We use the macros from epsf.tex to support this.
 % If epsf.tex is not installed and @image is used, we complain.
-%
+% 
 % Check for and read epsf.tex up front.  If we read it only at @image
 % time, we might be inside a group, and then its definitions would get
 % undone and the next image would fail.
 \openin 1 = epsf.tex
 \ifeof 1 \else
   \closein 1
-  % Do not bother showing banner with post-v2.7 epsf.tex (available in
-  % doc/epsf.tex until it shows up on ctan).
-  \def\epsfannounce{\toks0 = }%
+  \def\epsfannounce{\toks0 = }% do not bother showing banner
   \input epsf.tex
 \fi
 %
-% We will only complain once about lack of epsf.tex.
 \newif\ifwarnednoepsf
 \newhelp\noepsfhelp{epsf.tex must be installed for images to
   work.  It is also included in the Texinfo distribution, or you can get
-  it from ftp://tug.org/tex/epsf.tex.}
+  it from ftp://ftp.tug.org/tex/epsf.tex.}
 %
+% Only complain once about lack of epsf.tex.
 \def\image#1{%
   \ifx\epsfbox\undefined
     \ifwarnednoepsf \else
@@ -5621,79 +4689,42 @@
 % #2 is (optional) width, #3 is (optional) height.
 % #4 is just the usual extra ignored arg for parsing this stuff.
 \def\imagexxx#1,#2,#3,#4\finish{%
-  \ifpdf
-    \centerline{\dopdfimage{#1}{#2}{#3}}%
-  \else
-    % \epsfbox itself resets \epsf?size at each figure.
-    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
-    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
-    \begingroup
-      \catcode`\^^M = 5 % in case we're inside an example
-      % If the image is by itself, center it.
-      \ifvmode
-        \nobreak\bigskip
-        % Usually we'll have text after the image which will insert
-        % \parskip glue, so insert it here too to equalize the space
-        % above and below. 
-        \nobreak\vskip\parskip
-        \nobreak
-        \centerline{\epsfbox{#1.eps}}%
-        \bigbreak
-      \else
-        % In the middle of a paragraph, no extra space.
-        \epsfbox{#1.eps}%
-      \fi
-    \endgroup
-  \fi
+  % \epsfbox itself resets \epsf?size at each figure.
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+  \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+  \epsfbox{#1.eps}%
 }
 
-
-\message{localization,}
-% and i18n.
-
-% @documentlanguage is usually given very early, just after
-% @setfilename.  If done too late, it may not override everything
-% properly.  Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
-%
-\def\documentlanguage{\parsearg\dodocumentlanguage}
-\def\dodocumentlanguage#1{%
-  \tex % read txi-??.tex file in plain TeX.
-  % Read the file if it exists.
-  \openin 1 txi-#1.tex
-  \ifeof1
-    \errhelp = \nolanghelp
-    \errmessage{Cannot read language file txi-#1.tex}%
-    \let\temp = \relax
-  \else
-    \def\temp{\input txi-#1.tex }%
-  \fi
-  \temp
-  \endgroup
+% End of control word definitions.
+
+
+\message{and turning on texinfo input format.}
+
+\def\openindices{%
+   \newindex{cp}%
+   \newcodeindex{fn}%
+   \newcodeindex{vr}%
+   \newcodeindex{tp}%
+   \newcodeindex{ky}%
+   \newcodeindex{pg}%
 }
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty.  Maybe you need to install it?  In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
-%
+
+% Set some numeric style parameters, for 8.5 x 11 format.
+
+\hsize = 6in
+\hoffset = .25in
 \newdimen\defaultparindent \defaultparindent = 15pt
+\parindent = \defaultparindent
+\parskip 3pt plus 2pt minus 1pt
+\setleading{13.2pt}
+\advance\topskip by 1.2cm
 
 \chapheadingskip = 15pt plus 4pt minus 2pt
 \secheadingskip = 12pt plus 3pt minus 2pt
 \subsecheadingskip = 9pt plus 2pt minus 2pt
 
 % Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
+\vbadness=10000
 
 % Following George Bush, just get rid of widows and orphans.
 \widowpenalty=10000
@@ -5702,125 +4733,101 @@
 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
 % using an old version of TeX, don't do anything.  We want the amount of
 % stretch added to depend on the line length, hence the dependence on
-% \hsize.  We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
-  \ifx\emergencystretch\thisisundefined
-    % Allow us to assign to \emergencystretch anyway.
-    \def\emergencystretch{\dimen0}%
-  \else
-    \emergencystretch = .15\hsize
-  \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip.  Then whoever calls us can
-% set \parskip and call \setleading for \baselineskip.
+% \hsize.  This makes it come to about 9pt for the 8.5x11 format.
 %
-\def\internalpagesizes#1#2#3#4#5#6{%
-  \voffset = #3\relax
-  \topskip = #6\relax
-  \splittopskip = \topskip
-  %
-  \vsize = #1\relax
-  \advance\vsize by \topskip
-  \outervsize = \vsize
-  \advance\outervsize by 2\topandbottommargin
-  \pageheight = \vsize
-  %
-  \hsize = #2\relax
-  \outerhsize = \hsize
-  \advance\outerhsize by 0.5in
-  \pagewidth = \hsize
+\ifx\emergencystretch\thisisundefined
+  % Allow us to assign to \emergencystretch anyway.
+  \def\emergencystretch{\dimen0}%
+\else
+  \emergencystretch = \hsize
+  \divide\emergencystretch by 45
+\fi
+
+% Use @smallbook to reset parameters for 7x9.5 format  (or else 7x9.25)
+\def\smallbook{
+  \global\chapheadingskip = 15pt plus 4pt minus 2pt
+  \global\secheadingskip = 12pt plus 3pt minus 2pt
+  \global\subsecheadingskip = 9pt plus 2pt minus 2pt
   %
-  \normaloffset = #4\relax
-  \bindingoffset = #5\relax
-  %
-  \parindent = \defaultparindent
-  \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
-  \parskip = 3pt plus 2pt minus 1pt
-  \setleading{13.2pt}%
+  \global\lispnarrowing = 0.3in
+  \setleading{12pt}
+  \advance\topskip by -1cm
+  \global\parskip 2pt plus 1pt
+  \global\hsize = 5in
+  \global\vsize=7.5in
+  \global\tolerance=700
+  \global\hfuzz=1pt
+  \global\contentsrightmargin=0pt
+  \global\deftypemargin=0pt
+  \global\defbodyindent=.5cm
   %
-  % If page is nothing but text, make it come out even.
-  \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
-  \parskip = 2pt plus 1pt
-  \setleading{12pt}%
-  %
-  \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
+  \global\pagewidth=\hsize
+  \global\pageheight=\vsize
   %
-  \lispnarrowing = 0.3in
-  \tolerance = 700
-  \hfuzz = 1pt
-  \contentsrightmargin = 0pt
-  \deftypemargin = 0pt
-  \defbodyindent = .5cm
-  %
-  \let\smalldisplay = \smalldisplayx
-  \let\smallexample = \smalllispx
-  \let\smallformat = \smallformatx
-  \let\smalllisp = \smalllispx
-}}
+  \global\let\smalllisp=\smalllispx
+  \global\let\smallexample=\smalllispx
+  \global\def\Esmallexample{\Esmalllisp}
+}
 
 % Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
-  \setleading{12pt}%
-  \parskip = 3pt plus 2pt minus 1pt
-  %
-  \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
-  %
-  \tolerance = 700
-  \hfuzz = 1pt
-}}
+\def\afourpaper{
+\global\tolerance=700
+\global\hfuzz=1pt
+\setleading{12pt}
+\global\parskip 15pt plus 1pt
+
+\global\vsize= 53\baselineskip
+\advance\vsize by \topskip
+%\global\hsize=   5.85in     % A4 wide 10pt
+\global\hsize=  6.5in
+\global\outerhsize=\hsize
+\global\advance\outerhsize by 0.5in
+\global\outervsize=\vsize
+\global\advance\outervsize by 0.6in
+
+\global\pagewidth=\hsize
+\global\pageheight=\vsize
+}
+
+\bindingoffset=0pt
+\normaloffset=\hoffset
+\pagewidth=\hsize
+\pageheight=\vsize
+
+% Allow control of the text dimensions.  Parameters in order: textheight;
+% textwidth; voffset; hoffset; binding offset; topskip.
+% All require a dimension;
+% header is additional; added length extends the bottom of the page.
+
+\def\changepagesizes#1#2#3#4#5#6{
+ \global\vsize= #1
+ \global\topskip= #6
+ \advance\vsize by \topskip
+ \global\voffset= #3
+ \global\hsize= #2
+ \global\outerhsize=\hsize
+ \global\advance\outerhsize by 0.5in
+ \global\outervsize=\vsize
+ \global\advance\outervsize by 0.6in
+ \global\pagewidth=\hsize
+ \global\pageheight=\vsize
+ \global\normaloffset= #4
+ \global\bindingoffset= #5}
 
 % A specific text layout, 24x15cm overall, intended for A4 paper.  Top margin
 % 29mm, hence bottom margin 28mm, nominal side margin 3cm.
-\def\afourlatex{{\globaldefs = 1
-  \setleading{13.6pt}%
-  %
-  \afourpaper
-  \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
-  %
-  \globaldefs = 0
-}}
+\def\afourlatex
+        {\global\tolerance=700
+        \global\hfuzz=1pt
+        \setleading{12pt}
+        \global\parskip 15pt plus 1pt
+        \advance\baselineskip by 1.6pt
+        \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
+        }
 
 % Use @afourwide to print on European A4 paper in wide format.
-\def\afourwide{%
-  \afourpaper
-  \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
-  %
-  \globaldefs = 0
-}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\def\pagesizes{\parsearg\pagesizesxxx}
-\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
-  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
-  \globaldefs = 1
-  %
-  \parskip = 3pt plus 2pt minus 1pt
-  \setleading{13.2pt}%
-  %
-  \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
+\def\afourwide{\afourpaper
+\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
 
 % Define macros to output various characters with catcode for normal text.
 \catcode`\"=\other
@@ -5831,7 +4838,6 @@
 \catcode`\<=\other
 \catcode`\>=\other
 \catcode`\+=\other
-\catcode`\$=\other
 \def\normaldoublequote{"}
 \def\normaltilde{~}
 \def\normalcaret{^}
@@ -5840,7 +4846,6 @@
 \def\normalless{<}
 \def\normalgreater{>}
 \def\normalplus{+}
-\def\normaldollar{$}
 
 % This macro is used to make a character print one way in ttfont
 % where it can probably just be output, and another way in other fonts,
@@ -5851,13 +4856,7 @@
 % interword stretch (and shrink), and it is reasonable to expect all
 % typewriter fonts to have this, we can check that font parameter.
 %
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font.  Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts.  But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
 
 % Turn off all special characters except @
 % (and those which the user can use as if they were ordinary).
@@ -5865,10 +4864,10 @@
 % use math or other variants that look better in normal text.
 
 \catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
+\def\activedoublequote{{\tt \char '042}}
 \let"=\activedoublequote
 \catcode`\~=\active
-\def~{{\tt\char126}}
+\def~{{\tt \char '176}}
 \chardef\hat=`\^
 \catcode`\^=\active
 \def^{{\tt \hat}}
@@ -5879,7 +4878,7 @@
 \def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
 
 \catcode`\|=\active
-\def|{{\tt\char124}}
+\def|{{\tt \char '174}}
 \chardef \less=`\<
 \catcode`\<=\active
 \def<{{\tt \less}}
@@ -5888,8 +4887,6 @@
 \def>{{\tt \gtr}}
 \catcode`\+=\active
 \def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}
 %\catcode 27=\active
 %\def^^[{$\diamondsuit$}
 
@@ -5920,6 +4917,9 @@
 % \normalbackslash outputs one backslash in fixed width font.
 \def\normalbackslash{{\tt\rawbackslashxx}}
 
+% Say @foo, not \foo, in error messages.
+\escapechar=`\@
+
 % \catcode 17=0   % Define control-q
 \catcode`\\=\active
 
@@ -5933,8 +4933,7 @@
 @let|=@normalverticalbar
 @let<=@normalless
 @let>=@normalgreater
-@let+=@normalplus
-@let$=@normaldollar}
+@let+=@normalplus}
 
 @def@normalturnoffactive{@let"=@normaldoublequote
 @let\=@normalbackslash
@@ -5944,8 +4943,7 @@
 @let|=@normalverticalbar
 @let<=@normalless
 @let>=@normalgreater
-@let+=@normalplus
-@let$=@normaldollar}
+@let+=@normalplus}
 
 % Make _ and + \other characters, temporarily.
 % This is canceled by @fixbackslash.
@@ -5964,29 +4962,16 @@
 % Also back turn on active characters that might appear in the input
 % file name, in case not using a pre-dumped format.
 %
-@gdef@fixbackslash{%
-  @ifx\@eatinput @let\ = @normalbackslash @fi
-  @catcode`+=@active
-  @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These look ok in all fonts, so just make them not special.  
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
-
-@c Set initial fonts.
+@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active @catcode`@_=@active}
+
+%% These look ok in all fonts, so just make them not special.  The @rm below
+%% makes sure that the current font starts out as the newly loaded cmr10
+@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
+
 @textfonts
 @rm
 
-
 @c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
 @c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
 @c End: