--- a/src/unexelf.c	Mon Aug 13 10:54:55 2007 +0200
+++ b/src/unexelf.c	Mon Aug 13 10:55:33 2007 +0200
@@ -18,7 +18,7 @@
 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.  */
 
-/* Synched up with: FSF 20.2. */
+/* Synched up with: FSF 20.4. */
 
 /*
  * unexec.c - Convert a running program into an a.out file.
@@ -424,10 +424,98 @@
 #include <errno.h>
 #include <unistd.h>
 #include <fcntl.h>
+#if !defined (__NetBSD__) && !defined (__OpenBSD__)
 #include <elf.h>
+#endif
 #include <sys/mman.h>
+#if defined (__sony_news) && defined (_SYSTYPE_SYSV)
+#include <sys/elf_mips.h>
+#include <sym.h>
+#endif /* __sony_news && _SYSTYPE_SYSV */
+#if __sgi
+#include <sym.h> /* for HDRR declaration */
+#endif /* __sgi */
 
-#if __GLIBC__ - 0 >= 2
+#if defined (__alpha__) && !defined (__NetBSD__) && !defined (__OpenBSD__)
+/* Declare COFF debugging symbol table.  This used to be in
+   /usr/include/sym.h, but this file is no longer included in Red Hat
+   5.0 and presumably in any other glibc 2.x based distribution.  */
+typedef struct {
+	short magic;
+	short vstamp;
+	int ilineMax;
+	int idnMax;
+	int ipdMax;
+	int isymMax;
+	int ioptMax;
+	int iauxMax;
+	int issMax;
+	int issExtMax;
+	int ifdMax;
+	int crfd;
+	int iextMax;
+	long cbLine;
+	long cbLineOffset;
+	long cbDnOffset;
+	long cbPdOffset;
+	long cbSymOffset;
+	long cbOptOffset;
+	long cbAuxOffset;
+	long cbSsOffset;
+	long cbSsExtOffset;
+	long cbFdOffset;
+	long cbRfdOffset;
+	long cbExtOffset;
+} HDRR, *pHDRR; 
+#define cbHDRR sizeof(HDRR)
+#define hdrNil ((pHDRR)0)
+#endif
+
+#ifdef __NetBSD__
+/*
+ * NetBSD does not have normal-looking user-land ELF support.
+ */
+# ifdef __alpha__
+#  define ELFSIZE	64
+# else
+#  define ELFSIZE	32
+# endif
+# include <sys/exec_elf.h>
+
+# define PT_LOAD	Elf_pt_load
+# define SHT_SYMTAB	Elf_sht_symtab
+# define SHT_DYNSYM	Elf_sht_dynsym
+# define SHT_NULL	Elf_sht_null
+# define SHT_NOBITS	Elf_sht_nobits
+# define SHT_REL	Elf_sht_rel
+# define SHT_RELA	Elf_sht_rela
+
+# define SHN_UNDEF	Elf_eshn_undefined
+# define SHN_ABS	Elf_eshn_absolute
+# define SHN_COMMON	Elf_eshn_common
+
+/*
+ * The magic of picking the right size types is handled by the ELFSIZE
+ * definition above.
+ */
+# ifdef __STDC__
+#  define ElfW(type)    Elf_##type
+# else
+#  define ElfW(type)    Elf_/**/type
+# endif
+
+# ifdef __alpha__
+#  include <sys/exec_ecoff.h>
+#  define HDRR		struct ecoff_symhdr
+#  define pHDRR		HDRR *
+# endif
+#endif /* __NetBSD__ */
+
+#ifdef __OpenBSD__
+# include <sys/exec_elf.h>
+#endif
+
+#if __GNU_LIBRARY__ - 0 >= 6
 # include <link.h>	/* get ElfW etc */
 #endif
 
@@ -487,8 +575,8 @@
 
 /* Round X up to a multiple of Y.  */
 
-static int
-round_up (int x, int y)
+static ElfW(Addr)
+round_up (ElfW(Addr) x, ElfW(Addr) y)
 {
   int rem = x % y;
   if (rem == 0)
@@ -531,7 +619,8 @@
   ElfW(Off)  new_data2_offset;
   ElfW(Addr) new_data2_addr;
 
-  int n, nn, old_bss_index, old_data_index;
+  int n, nn, old_bss_index, old_data_index, new_data2_index;
+  int old_sbss_index, old_mdebug_index;
   struct stat stat_buf;
 
   /* Open the old file & map it into the address space. */
@@ -580,8 +669,48 @@
   if (old_bss_index == old_file_h->e_shnum)
     fatal ("Can't find .bss in %s.\n", old_name, 0);
 
-  old_bss_addr = OLD_SECTION_H (old_bss_index).sh_addr;
-  old_bss_size = OLD_SECTION_H (old_bss_index).sh_size;
+  for (old_sbss_index = 1; old_sbss_index < (int) old_file_h->e_shnum;
+       old_sbss_index++)
+    {
+#ifdef DEBUG
+      fprintf (stderr, "Looking for .sbss - found %s\n",
+	       old_section_names + OLD_SECTION_H (old_sbss_index).sh_name);
+#endif
+      if (!strcmp (old_section_names + OLD_SECTION_H (old_sbss_index).sh_name,
+		   ".sbss"))
+	break;
+    }
+  if (old_sbss_index == old_file_h->e_shnum)
+    {
+      old_sbss_index = -1;
+      old_bss_addr = OLD_SECTION_H(old_bss_index).sh_addr;
+      old_bss_size = OLD_SECTION_H(old_bss_index).sh_size;
+      new_data2_offset = OLD_SECTION_H(old_bss_index).sh_offset;
+      new_data2_index = old_bss_index;
+    }
+  else
+    {
+      old_bss_addr = OLD_SECTION_H(old_sbss_index).sh_addr;
+      old_bss_size = OLD_SECTION_H(old_bss_index).sh_size
+	+ OLD_SECTION_H(old_sbss_index).sh_size;
+      new_data2_offset = OLD_SECTION_H(old_sbss_index).sh_offset;
+      new_data2_index = old_sbss_index;
+    }
+
+  for (old_mdebug_index = 1; old_mdebug_index < (int) old_file_h->e_shnum;
+       old_mdebug_index++)
+    {
+#ifdef DEBUG
+      fprintf (stderr, "Looking for .mdebug - found %s\n",
+	       old_section_names + OLD_SECTION_H (old_mdebug_index).sh_name);
+#endif
+      if (!strcmp (old_section_names + OLD_SECTION_H (old_mdebug_index).sh_name,
+		   ".mdebug"))
+	break;
+    }
+    if (old_mdebug_index == old_file_h->e_shnum)
+	old_mdebug_index = 0;
+
 #if defined (emacs) || !defined (DEBUG)
   new_bss_addr = (ElfW(Addr)) sbrk (0);
 #else
@@ -589,7 +718,6 @@
 #endif
   new_data2_addr = old_bss_addr;
   new_data2_size = new_bss_addr - old_bss_addr;
-  new_data2_offset = OLD_SECTION_H (old_bss_index).sh_offset;
 
 #ifdef DEBUG
   fprintf (stderr, "old_bss_index %d\n", old_bss_index);
@@ -674,24 +802,31 @@
       if ((OLD_SECTION_H (old_bss_index)).sh_addralign > alignment)
 	alignment = OLD_SECTION_H (old_bss_index).sh_addralign;
 
-#ifndef __mips	/* ifndef added by jwz at suggestion of
-		   r02kar@x4u2.desy.de (Karsten Kuenne) to avoid
-		   "Program segment above .bss" when dumping.
-		 */
-      if (NEW_PROGRAM_H (n).p_vaddr + NEW_PROGRAM_H (n).p_filesz > old_bss_addr)
-	fatal ("Program segment above .bss in %s\n", old_name, 0);
-#endif /*  __mips */
+#ifdef __mips
+	  /* According to r02kar@x4u2.desy.de (Karsten Kuenne)
+	     and oliva@gnu.org (Alexandre Oliva), on IRIX 5.2, we
+	     always get "Program segment above .bss" when dumping
+	     when the executable doesn't have an sbss section.  */
+      if (old_sbss_index != -1)
+#endif /* __mips */
+      if (NEW_PROGRAM_H (n).p_vaddr + NEW_PROGRAM_H (n).p_filesz
+	  > (old_sbss_index == -1
+	     ? old_bss_addr
+	     : round_up (old_bss_addr, alignment)))
+	  fatal ("Program segment above .bss in %s\n", old_name, 0);
 
       if (NEW_PROGRAM_H (n).p_type == PT_LOAD
-	  && (round_up ((int) ((NEW_PROGRAM_H (n)).p_vaddr
-			       + (NEW_PROGRAM_H (n)).p_filesz),
+	  && (round_up ((NEW_PROGRAM_H (n)).p_vaddr
+			+ (NEW_PROGRAM_H (n)).p_filesz,
 			alignment)
-	      == round_up ((int) old_bss_addr, alignment)))
+	      == round_up (old_bss_addr, alignment)))
 	break;
     }
   if (n < 0)
     fatal ("Couldn't find segment next to .bss in %s\n", old_name, 0);
 
+  /* Make sure that the size includes any padding before the old .bss
+     section.  */
   NEW_PROGRAM_H (n).p_filesz = new_bss_addr - NEW_PROGRAM_H (n).p_vaddr;
   NEW_PROGRAM_H (n).p_memsz = NEW_PROGRAM_H (n).p_filesz;
 
@@ -726,8 +861,10 @@
   for (n = 1, nn = 1; n < (int) old_file_h->e_shnum; n++, nn++)
     {
       caddr_t src;
-      /* If it is bss section, insert the new data2 section before it. */
-      if (n == old_bss_index)
+      /* If it is (s)bss section, insert the new data2 section before it.  */
+      /* new_data2_index is the index of either old_sbss or old_bss, that was
+	 chosen as a section for new_data2.   */
+      if (n == new_data2_index)
 	{
 	  /* Steal the data section header for this data2 section. */
 	  memcpy (&NEW_SECTION_H (nn), &OLD_SECTION_H (old_data_index),
@@ -744,21 +881,24 @@
 	  /* Now copy over what we have in the memory now. */
 	  memcpy (NEW_SECTION_H (nn).sh_offset + new_base,
 		  (caddr_t) OLD_SECTION_H (n).sh_addr,
-		  /* #### mrb: should be old_bss_size instead? */
 		  new_data2_size);
 	  nn++;
 	}
 
       memcpy (&NEW_SECTION_H (nn), &OLD_SECTION_H (n),
 	      old_file_h->e_shentsize);
-
-      /* The new bss section's size is zero, and its file offset and virtual
-	 address should be off by NEW_DATA2_SIZE. */
-      if (n == old_bss_index)
+      
+      if (n == old_bss_index
+	  /* The new bss and sbss section's size is zero, and its file offset
+	     and virtual address should be off by NEW_DATA2_SIZE.  */
+	  || n == old_sbss_index
+	  )
 	{
-	  /* NN should be `old_bss_index + 1' at this point. */
-	  NEW_SECTION_H (nn).sh_offset += new_data2_size;
-	  NEW_SECTION_H (nn).sh_addr += new_data2_size;
+	  /* NN should be `old_s?bss_index + 1' at this point. */
+	  NEW_SECTION_H (nn).sh_offset =
+	    NEW_SECTION_H (new_data2_index).sh_offset + new_data2_size;
+	  NEW_SECTION_H (nn).sh_addr =
+	    NEW_SECTION_H (new_data2_index).sh_addr + new_data2_size;
 	  /* Let the new bss section address alignment be the same as the
 	     section address alignment followed the old bss section, so
 	     this section will be placed in exactly the same place. */
@@ -782,7 +922,9 @@
 	      >= OLD_SECTION_H (old_bss_index-1).sh_offset)
 	    NEW_SECTION_H (nn).sh_offset += new_data2_size;
 #else
-	  if (NEW_SECTION_H (nn).sh_offset >= new_data2_offset)
+	  if (round_up (NEW_SECTION_H (nn).sh_offset,
+			OLD_SECTION_H (old_bss_index).sh_addralign)
+	      >= new_data2_offset)
 	    NEW_SECTION_H (nn).sh_offset += new_data2_size;
 #endif
 	  /* Any section that was originally placed after the section
@@ -811,17 +953,19 @@
       /* Write out the sections. .data and .data1 (and data2, called
 	 ".data" in the strings table) get copied from the current process
 	 instead of the old file.  */
-#ifdef __powerpc__
-      /* The PowerPC has additional 'data' segments which need to be saved */
-      if (!strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".data") ||
-	  !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".data1") ||
-	  !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".sdata") ||
-	  !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".sdata1"))
-#else
       if (!strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".data")
 	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
+		      ".sdata")
+	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
+		      ".lit4")
+	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
+		      ".lit8")
+	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
+		      ".got")
+	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
+		      ".sdata1")
+	  || !strcmp ((old_section_names + NEW_SECTION_H (n).sh_name),
 		      ".data1"))
-#endif
 	src = (caddr_t) OLD_SECTION_H (n).sh_addr;
       else
 	src = old_base + OLD_SECTION_H (n).sh_offset;
@@ -829,6 +973,106 @@
       memcpy (NEW_SECTION_H (nn).sh_offset + new_base, src,
 	      NEW_SECTION_H (nn).sh_size);
 
+#ifdef __alpha__
+      /* Update Alpha COFF symbol table: */
+      if (strcmp (old_section_names + OLD_SECTION_H (n).sh_name, ".mdebug")
+	  == 0)
+	{
+	  pHDRR symhdr = (pHDRR) (NEW_SECTION_H (nn).sh_offset + new_base);
+
+	  symhdr->cbLineOffset += new_data2_size;
+	  symhdr->cbDnOffset += new_data2_size;
+	  symhdr->cbPdOffset += new_data2_size;
+	  symhdr->cbSymOffset += new_data2_size;
+	  symhdr->cbOptOffset += new_data2_size;
+	  symhdr->cbAuxOffset += new_data2_size;
+	  symhdr->cbSsOffset += new_data2_size;
+	  symhdr->cbSsExtOffset += new_data2_size;
+	  symhdr->cbFdOffset += new_data2_size;
+	  symhdr->cbRfdOffset += new_data2_size;
+	  symhdr->cbExtOffset += new_data2_size;
+	}
+#endif /* __alpha__ */
+
+#if defined (__sony_news) && defined (_SYSTYPE_SYSV)
+      if (NEW_SECTION_H (nn).sh_type == SHT_MIPS_DEBUG && old_mdebug_index) 
+        {
+	  int diff = NEW_SECTION_H(nn).sh_offset 
+	 	- OLD_SECTION_H(old_mdebug_index).sh_offset;
+	  HDRR *phdr = (HDRR *)(NEW_SECTION_H (nn).sh_offset + new_base);
+
+	  if (diff)
+	    {
+	      phdr->cbLineOffset += diff;
+	      phdr->cbDnOffset   += diff;
+	      phdr->cbPdOffset   += diff;
+	      phdr->cbSymOffset  += diff;
+	      phdr->cbOptOffset  += diff;
+	      phdr->cbAuxOffset  += diff;
+	      phdr->cbSsOffset   += diff;
+	      phdr->cbSsExtOffset += diff;
+	      phdr->cbFdOffset   += diff;
+	      phdr->cbRfdOffset  += diff;
+	      phdr->cbExtOffset  += diff;
+	    }
+	}
+#endif /* __sony_news && _SYSTYPE_SYSV */
+
+#if __sgi
+      /* Adjust  the HDRR offsets in .mdebug and copy the 
+	 line data if it's in its usual 'hole' in the object.
+	 Makes the new file debuggable with dbx.
+	 patches up two problems: the absolute file offsets
+	 in the HDRR record of .mdebug (see /usr/include/syms.h), and
+	 the ld bug that gets the line table in a hole in the
+	 elf file rather than in the .mdebug section proper.
+	 David Anderson. davea@sgi.com  Jan 16,1994.  */
+      if (n == old_mdebug_index)
+	{
+#define MDEBUGADJUST(__ct,__fileaddr)		\
+  if (n_phdrr->__ct > 0)			\
+    {						\
+      n_phdrr->__fileaddr += movement;		\
+    }
+
+	  HDRR * o_phdrr = (HDRR *)((byte *)old_base + OLD_SECTION_H (n).sh_offset);
+	  HDRR * n_phdrr = (HDRR *)((byte *)new_base + NEW_SECTION_H (nn).sh_offset);
+	  unsigned movement = new_data2_size;
+
+	  MDEBUGADJUST (idnMax, cbDnOffset);
+	  MDEBUGADJUST (ipdMax, cbPdOffset);
+	  MDEBUGADJUST (isymMax, cbSymOffset);
+	  MDEBUGADJUST (ioptMax, cbOptOffset);
+	  MDEBUGADJUST (iauxMax, cbAuxOffset);
+	  MDEBUGADJUST (issMax, cbSsOffset);
+	  MDEBUGADJUST (issExtMax, cbSsExtOffset);
+	  MDEBUGADJUST (ifdMax, cbFdOffset);
+	  MDEBUGADJUST (crfd, cbRfdOffset);
+	  MDEBUGADJUST (iextMax, cbExtOffset);
+	  /* The Line Section, being possible off in a hole of the object,
+	     requires special handling.  */
+	  if (n_phdrr->cbLine > 0)
+	    {
+	      if (o_phdrr->cbLineOffset > (OLD_SECTION_H (n).sh_offset
+					   + OLD_SECTION_H (n).sh_size))
+		{
+		  /* line data is in a hole in elf. do special copy and adjust
+		     for this ld mistake.
+		     */
+		  n_phdrr->cbLineOffset += movement;
+
+		  memcpy (n_phdrr->cbLineOffset + new_base,
+			  o_phdrr->cbLineOffset + old_base, n_phdrr->cbLine);
+		}
+	      else
+		{
+		  /* somehow line data is in .mdebug as it is supposed to be.  */
+		  MDEBUGADJUST (cbLine, cbLineOffset);
+		}
+	    }
+	}
+#endif /* __sgi */
+
       /* If it is the symbol table, its st_shndx field needs to be patched.  */
       if (NEW_SECTION_H (nn).sh_type == SHT_SYMTAB
 	  || NEW_SECTION_H (nn).sh_type == SHT_DYNSYM)
@@ -886,17 +1130,19 @@
 	   be no harm in that provided that r_offset is always the first
 	   member.  */
 	nn = section.sh_info;
-#ifdef __powerpc__
-      /* The PowerPC has additional 'data' segments which need to be saved */
-	if (!strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".data") ||
-	    !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".data1") ||
-	    !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".sdata") ||
-	    !strcmp (old_section_names + NEW_SECTION_H (n).sh_name, ".sdata1"))
-#else
 	if (!strcmp (old_section_names + NEW_SECTION_H (nn).sh_name, ".data")
 	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
+			".sdata")
+	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
+			".lit4")
+	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
+			".lit8")
+	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
+			".got")
+	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
+			".sdata1")
+	    || !strcmp ((old_section_names + NEW_SECTION_H (nn).sh_name),
 			".data1"))
-#endif
 	  {
 	    ElfW(Addr) offset = NEW_SECTION_H (nn).sh_addr -
 	      NEW_SECTION_H (nn).sh_offset;
@@ -905,6 +1151,13 @@
 		 reloc += section.sh_entsize)
 	      {
 		ElfW(Addr) addr = ((ElfW(Rel) *) reloc)->r_offset - offset;
+#ifdef __alpha__
+		/* The Alpha ELF binutils currently have a bug that
+		   sometimes results in relocs that contain all
+		   zeroes.  Work around this for now...  */
+		if (((ElfW(Rel) *) reloc)->r_offset == 0)
+		    continue;
+#endif
 		memcpy (new_base + addr, old_base + addr, sizeof(ElfW(Addr)));
 	      }
 	  }