--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Makefile.in	Mon Aug 13 08:45:50 2007 +0200
@@ -0,0 +1,590 @@
+# DIST: This is the distribution Makefile for XEmacs.  configure can
+# DIST: make most of the changes to this file you might want, so try
+# DIST: that first.
+
+# make all	to compile and build XEmacs.
+# make install	to install it.
+# make TAGS	to update tags tables.
+#
+# make clean  or  make mostlyclean
+#      Delete all files from the current directory that are normally
+#      created by building the program.	 Don't delete the files that
+#      record the configuration.  Also preserve files that could be made
+#      by building, but normally aren't because the distribution comes
+#      with them.
+#
+#      Delete `.dvi' files here if they are not part of the distribution.
+# 
+# make distclean
+#      Delete all files from the current directory that are created by
+#      configuring or building the program.  If you have unpacked the
+#      source and built the program without creating any other files,
+#      `make distclean' should leave only the files that were in the
+#      distribution.
+# 
+# make realclean
+#      Delete everything from the current directory that can be
+#      reconstructed with this Makefile.  This typically includes
+#      everything deleted by distclean, plus more: C source files
+#      produced by Bison, tags tables, info files, and so on.
+#
+# make extraclean
+#      Still more severe - delete backup and autosave files, too.
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+# ==================== Things `configure' Might Edit ====================
+
+CC=@CC@
+CPP=@CPP@
+C_SWITCH_SYSTEM=@c_switch_system@
+LN_S=@LN_S@
+CFLAGS=@CFLAGS@
+C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
+LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
+YACC=@YACC@
+
+### These help us choose version- and architecture-specific directories
+### to install files in.
+
+### This should be the number of the XEmacs version we're building,
+### like `19.13' or `19.14'.
+version=@version@
+
+### This should be the name of the configuration we're building XEmacs
+### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+configuration=@configuration@
+
+### Libraries which should be edited into lib-src/Makefile.
+libsrc_libs=@libsrc_libs@
+
+# ==================== Where To Install Things ====================
+
+# The default location for installation.  Everything is placed in
+# subdirectories of this directory.  The default values for many of
+# the variables below are expressed in terms of this one, so you may
+# not need to change them.  This defaults to /usr/local.
+prefix=@prefix@
+
+# Like `prefix', but used for architecture-specific files.
+exec_prefix=@exec_prefix@
+
+# Where to install XEmacs and other binaries that people will want to
+# run directly (like etags).
+bindir=@bindir@
+
+# Where to install architecture-independent data files.	 ${lispdir}
+# and ${etcdir} are subdirectories of this.
+datadir=@datadir@
+
+# Where to install and expect the files that XEmacs modifies as it
+# runs.	 These files are all architecture-independent. Right now, the
+# only such data is the locking directory; ${lockdir} is a
+# subdirectory of this.
+statedir=@statedir@
+
+# Where to install and expect executable files to be run by XEmacs
+# rather than directly by users, and other architecture-dependent
+# data.	 ${archlibdir} is a subdirectory of this.
+libdir=@libdir@
+
+# Where to install XEmacs's man pages, and what extension they should have.
+mandir=@mandir@
+manext=.1
+
+# Where to install and expect the info files describing XEmacs.	In the
+# past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
+# since there are now many packages documented with the texinfo
+# system, it is inappropriate to imply that it is part of XEmacs.
+infodir=@infodir@
+
+# This is set to 'yes' if the user specified the --infodir flag at
+# configuration time.
+infodir_user_defined=@infodir_user_defined@
+
+# Where to find the source code.  The source code for XEmacs's C kernel is
+# expected to be in ${srcdir}/src, and the source code for XEmacs's
+# utility programs is expected to be in ${srcdir}/lib-src.  This is
+# set by the configure script's `--srcdir' option.
+srcdir=@srcdir@
+
+# Tell make where to find source files; this is needed for the makefiles.
+VPATH=@srcdir@
+
+# ==================== XEmacs-specific directories ====================
+
+# These variables hold the values XEmacs will actually use.  They are
+# based on the values of the standard Make variables above.
+
+# Where to install the lisp files distributed with
+# XEmacs.  This includes the XEmacs version, so that the
+# lisp files for different versions of XEmacs will install
+# themselves in separate directories.
+lispdir=@lispdir@
+
+# This is set to 'yes' if the user specified the --lispdir or
+# --datadir flag at configuration time.
+lispdir_user_defined=@lispdir_user_defined@
+
+# Directories XEmacs should search for lisp files specific
+# to this site (i.e. customizations), before consulting
+# ${lispdir}.  This should be a colon-separated list of
+# directories.
+sitelispdir=@sitelispdir@
+
+# Where XEmacs will search for its lisp files while
+# building.  This is only used during the process of
+# compiling XEmacs, to help XEmacs find its lisp files
+# before they've been installed in their final location.
+# It's usually identical to lispdir, except that the
+# entry for the directory containing the installed lisp
+# files has been replaced with ../lisp.  This should be a
+# colon-separated list of directories.
+buildlispdir=${srcdir}/lisp
+
+# Where to install the other architecture-independent
+# data files distributed with XEmacs (like the tutorial,
+# the cookie recipes and the Zippy database). This path
+# usually contains the XEmacs version number, so the data
+# files for multiple versions of XEmacs may be installed
+# at once.
+etcdir=@etcdir@
+
+# This is set to 'yes' if the user specified the --etcdir or
+# --datadir flag at configuration time.
+etcdir_user_defined=@etcdir_user_defined@
+
+# Where to create and expect the locking directory, where
+# the XEmacs locking code keeps track of which files are
+# currently being edited.
+lockdir=@lockdir@
+
+# This is set to 'yes' if the user specified the --lockdir or
+# --statedir flag at configuration time.
+lockdir_user_defined=@lockdir_user_defined@
+
+# Where to put executables to be run by XEmacs rather than
+# the user.  This path usually includes the XEmacs version
+# and configuration name, so that multiple configurations
+# for multiple versions of XEmacs may be installed at
+# once.
+archlibdir=@archlibdir@
+
+# This is set to 'yes' if the user specified any of --exec-prefix,
+# --libdir or --archlibdir at configuration time.
+archlibdir_user_defined=@archlibdir_user_defined@
+
+# ==================== Utility Programs for the Build ====================
+
+# Allow the user to specify the install program.
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+# ============================= Targets ==============================
+
+# Subdirectories to make recursively.  `lisp' is not included
+# because the compiled lisp files are part of the distribution
+# and you cannot remake them without installing XEmacs first.
+MAKE_SUBDIR = lib-src lwlib dynodump src
+
+# Subdirectories that can be made recursively.
+SUBDIR = ${MAKE_SUBDIR} man
+
+# The makefiles of the directories in $SUBDIR.
+SUBDIR_MAKEFILES = lib-src/Makefile lwlib/Makefile dynodump/Makefile src/Makefile man/Makefile
+
+# Subdirectories to install, and where they'll go.
+# lib-src's makefile knows how to install it, so we don't do that here.
+# When installing the info files, we need to do special things to
+# avoid nuking an existing dir file, so we don't do that here;
+# instead, we have written out explicit code in the `install' targets.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = ${etcdir} ${lispdir}
+
+.NO_PARALLEL:	src/paths.h src/Emacs.ad.h ${MAKE_SUBDIR} dump-elcs
+
+all:	src/paths.h src/Emacs.ad.h ${MAKE_SUBDIR}
+
+# Convenience target for XEmacs beta testers
+beta:		clean all-elc
+
+# Build XEmacs and recompile out-of-date and missing .elc files along
+# the way.
+all-elc:	src/paths.h src/Emacs.ad.h lib-src lwlib dump-elcs src
+	sh ${srcdir}/lib-src/update-elc.sh
+
+# Sub-target for all-elc.
+dump-elcs:	FRC.dump-elcs
+	cd src; $(MAKE) dump-elcs $(MFLAGS) \
+		CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
+
+autoloads:	src
+	sh ${srcdir}/lib-src/update-autoloads.sh
+
+# We force the rebuilding of src/paths.h because the user might give
+# different values for the various directories.  Since we use
+# move-if-change, src/paths.h only actually changes if the user did
+# something notable, so the only unnecessary work we do is in building
+# src/paths.h.tmp, which isn't much.  Note that sed is not in /bin on
+# 386bsd.
+src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC.src.paths.h
+	@echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+	-rm -f src/paths.h.tmp
+	@cp ${srcdir}/src/paths.h.in src/paths.h.tmp
+	-chmod 0644 src/paths.h.tmp
+	@echo '#define PATH_PREFIX "${prefix}"' >> src/paths.h.tmp
+	@if [ x"${lispdir_user_defined}" = x"yes" ]; then \
+	  echo '#define PATH_LOADSEARCH "${lispdir}"' >> src/paths.h.tmp;\
+	else \
+	  echo '/* #define PATH_LOADSEARCH "${lispdir}" */' >>src/paths.h.tmp;\
+	fi
+	@if [ x"${archlibdir_user_defined}" = x"yes" ]; then \
+	  echo '#define PATH_EXEC "${archlibdir}"' >> src/paths.h.tmp ;\
+	else \
+	  echo '/* #define PATH_EXEC "${archlibdir}" */' >> src/paths.h.tmp ;\
+	fi
+	@if [ x"${etcdir_user_defined}" = x"yes" ]; then \
+	  echo '#define PATH_DATA "${etcdir}"' >> src/paths.h.tmp ;\
+	else \
+	  echo '/* #define PATH_DATA "${etcdir}" */' >> src/paths.h.tmp ;\
+	fi
+	@if [ x"${lockdir_user_defined}" = x"yes" ]; then \
+	  echo '#define PATH_LOCK "${lockdir}"' >> src/paths.h.tmp ;\
+	else \
+	  echo '/* #define PATH_LOCK "${lockdir}" */' >> src/paths.h.tmp ;\
+	fi
+	@if [ x"${infodir_user_defined}" = x"yes" ]; then \
+	  echo '#define PATH_INFO "${infodir}"' >> src/paths.h.tmp ;\
+	else \
+	  echo '/* #define PATH_INFO "${infodir}" */' >> src/paths.h.tmp ;\
+	fi
+	@sh ${srcdir}/move-if-change src/paths.h.tmp src/paths.h
+
+# We have to force the building of Emacs.ad.h as well in order to get it
+# updated correctly when VPATH is being used.  Since we use move-if-change,
+# it will only actually change if the user modified ${etcdir}/Emacs.ad.
+src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
+	@echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
+	-rm -f src/Emacs.ad.h
+	@(echo "/*	Do not edit this file!" ; \
+	  echo "  	Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
+	  echo " */" ; \
+	  /bin/sh ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
+	  src/Emacs.ad.h
+
+src:	lib-src lwlib dynodump FRC.src
+lib-src: FRC.lib-src
+lwlib:	FRC.lwlib
+dynodump: FRC.dynodump
+
+.RECURSIVE: ${SUBDIR}
+
+${SUBDIR}: ${SUBDIR_MAKEFILES} src/config.h FRC
+	cd $@; $(MAKE) all $(MFLAGS) \
+		CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
+
+Makefile: ${srcdir}/Makefile.in config.status
+	./config.status
+
+src/Makefile: ${srcdir}/src/Makefile.in.in config.status
+	./config.status
+
+lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
+	./config.status
+
+lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
+	./config.status
+
+dynodump/Makefile: ${srcdir}/dynodump/Makefile.in.in config.status
+	./config.status
+
+man/Makefile: ${srcdir}/man/Makefile.in.in config.status
+	./config.status
+
+src/config.h: ${srcdir}/src/config.h.in
+	./config.status
+
+# ==================== Installation ====================
+
+## If we let lib-src do its own installation, that means we
+## don't have to duplicate the list of utilities to install in
+## this Makefile as well.
+
+## On AIX, use tar xBf.
+## On Xenix, use tar xpf.
+
+.PHONY: install install-arch-dep install-arch-indep mkdir
+
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS).  In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
+
+## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
+## they "won't ever modify src/paths.h".  But that means you can't do
+## 'make install' right off the bat because src/paths.h won't exist.
+## And, in XEmacs case, src/Emacs.ad.h won't exist either.  I also
+## don't see the point in avoiding modifying paths.h.  It creates an
+## inconsistency in the build process.  So we go ahead and depend on
+## all.  --cet
+
+install: all install-arch-dep install-arch-indep;
+
+install-arch-dep: mkdir
+	(cd lib-src; \
+	  $(MAKE) install $(MFLAGS) prefix=${prefix} \
+	    exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
+	    archlibdir=${archlibdir})
+	if [ `(cd ${archlibdir}; /bin/pwd)` != `(cd ./lib-src; /bin/pwd)` ]; \
+	then \
+	   echo "Copying lib-src/DOC-* ..." ; \
+	   (cd ./lib-src; tar -cf - DOC-*)|(cd ${archlibdir}; umask 0; tar -xf - ); \
+	   for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
+	     rm -rf $${subdir}/RCS ; \
+	     rm -rf $${subdir}/CVS ; \
+	     rm -rf $${subdir}/SCCS ; \
+	     rm -f  $${subdir}/\#* ; \
+	     rm -f  $${subdir}/*~ ; \
+	   done ; \
+	else true; fi
+	${INSTALL_PROGRAM} src/xemacs ${bindir}/xemacs-${version}
+	-chmod 0755 ${bindir}/xemacs-${version}
+	rm -f ${bindir}/xemacs
+	(cd ${bindir} ; ${LN_S} xemacs-${version} ./xemacs)
+
+install-arch-indep: mkdir
+	-set ${COPYDESTS} ; \
+	 for dir in ${COPYDIR} ; do \
+	   if [ `(cd $$1 && pwd)` != `(cd $${dir} && pwd)` ] ; then \
+	     echo "rm -rf $$1" ; \
+	   fi ; \
+	   shift ; \
+	 done
+	-set ${COPYDESTS} ; \
+	 mkdir ${COPYDESTS} ; \
+	 for dir in ${COPYDIR} ; do \
+	   dest=$$1 ; shift ; \
+	   [ -d $${dir} ] \
+	   && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+	   && (echo "Copying $${dir}..." ; \
+	       (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xf - );\
+	       chmod 0755 $${dest}; \
+	       for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
+		 rm -rf $${subdir}/RCS ; \
+		 rm -rf $${subdir}/CVS ; \
+		 rm -rf $${subdir}/SCCS ; \
+		 rm -f  $${subdir}/\#* ; \
+		 rm -f  $${subdir}/*~ ; \
+	       done) ; \
+	 done
+	if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
+	then \
+	  (cd ${srcdir}/info ; \
+	   if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
+	     ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
+	   fi ; \
+	   for f in ange-ftp* cc-mode* cl* dired* ediff* external-widget* \
+		    forms* gnus* hyperbole* ilisp* info* internals* \
+		    ispell* internals* lispref* mailcrypt* message* mh-e* \
+                    new-users-guide* oo-browser* pcl-cvs* psgml* rmail* \
+                    standards* supercite* term.* termcap* texinfo* viper* \
+                    vm* w3* xemacs* ; do \
+	     ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f ; \
+	     chmod 0644 ${infodir}/$$f; \
+	   done); \
+	else true; fi
+	cd ${srcdir}/etc; for page in xemacs etags ctags gnuserv \
+				      gnuclient gnuattach gnudoit ; do \
+	  ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
+	  chmod 0644 ${mandir}/$${page}${manext} ; \
+	done
+
+MAKEPATH=./lib-src/make-path
+### Build all the directories we're going to install XEmacs in.	Since
+### we may be creating several layers of directories (for example,
+### /usr/local/lib/xemacs-19.14/mips-dec-ultrix4.2), we use make-path
+### instead of mkdir.  Not all systems' mkdirs have the `-p' flag.
+mkdir: FRC.mkdir
+	${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
+	  ${bindir} ${datadir} ${libdir} ${sitelispdir}
+	-chmod 0777 ${lockdir}
+
+### Delete all the installed files that the `install' target would
+### create (but not the noninstalled files such as `make all' would
+### create).
+###
+### Don't delete the lisp and etc directories if they're in the source tree.
+#### This target has not been updated in sometime and until it is it
+#### would be extremely dangerous for anyone to use it.
+#uninstall:
+#	(cd lib-src; 					\
+#	 $(MAKE) $(MFLAGS) uninstall			\
+#	    prefix=${prefix} exec_prefix=${exec_prefix}	\
+#	    bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+#	for dir in ${lispdir} ${etcdir} ; do 		\
+#	  case `(cd $${dir} ; pwd)` in			\
+#	    `(cd ${srcdir} ; pwd)`* ) ;;		\
+#	    * ) rm -rf $${dir} ;;			\
+#	  esac ;					\
+#	  case $${dir} in				\
+#	    ${datadir}/xemacs/${version}/* )		\
+#	      rm -rf ${datadir}/xemacs/${version}	\
+#	    ;;						\
+#	  esac ;					\
+#	done
+#	(cd ${infodir} && rm -f cl* xemacs* forms* info* vip*)
+#	(cd ${mandir} && rm -f xemacs.1 etags.1 ctags.1 gnuserv.1)
+#	(cd ${bindir} && rm -f xemacs-${version} xemacs)
+
+
+### Some makes seem to remember that they've built something called FRC,
+### so you can only use a given FRC once per makefile.
+FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.lwlib FRC.mkdir FRC.dump-elcs:
+FRC.dynodump:
+FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean:
+
+# ==================== Cleaning up and miscellanea ====================
+
+.PHONY: mostlyclean clean distclean realclean extraclean
+
+### `mostlyclean'
+###      Like `clean', but may refrain from deleting a few files that people
+###      normally don't want to recompile.  For example, the `mostlyclean'
+###      target for GCC does not delete `libgcc.a', because recompiling it
+###      is rarely necessary and takes a lot of time.
+mostlyclean: FRC.mostlyclean
+	(cd src      && $(MAKE) $(MFLAGS) mostlyclean)
+	(cd lib-src  && $(MAKE) $(MFLAGS) mostlyclean)
+	(cd lwlib    && $(MAKE) $(MFLAGS) mostlyclean)
+	(cd dynodump && $(MAKE) $(MFLAGS) mostlyclean)
+	-(cd man     && $(MAKE) $(MFLAGS) mostlyclean)
+
+### `clean'
+###      Delete all files from the current directory that are normally
+###      created by building the program.  Don't delete the files that
+###      record the configuration.  Also preserve files that could be made
+###      by building, but normally aren't because the distribution comes
+###      with them.
+### 
+###      Delete `.dvi' files here if they are not part of the distribution.
+clean: FRC.clean
+	(cd src      && $(MAKE) $(MFLAGS) clean)
+	(cd lib-src  && $(MAKE) $(MFLAGS) clean)
+	(cd lwlib    && $(MAKE) $(MFLAGS) clean)
+	(cd dynodump && $(MAKE) $(MFLAGS) clean)
+	-(cd man     && $(MAKE) $(MFLAGS) clean)
+
+### `distclean'
+###      Delete all files from the current directory that are created by
+###      configuring or building the program.  If you have unpacked the
+###      source and built the program without creating any other files,
+###      `make distclean' should leave only the files that were in the
+###      distribution.
+top_distclean=\
+	rm -f config.status config-tmp-* build-install ; \
+	rm -f Makefile ${SUBDIR_MAKEFILES}; \
+	(cd lock && rm -f *)
+
+distclean: FRC.distclean
+	(cd src      && $(MAKE) $(MFLAGS) distclean)
+	(cd lib-src  && $(MAKE) $(MFLAGS) distclean)
+	(cd lwlib    && $(MAKE) $(MFLAGS) distclean)
+	(cd dynodump && $(MAKE) $(MFLAGS) distclean)
+	-(cd man     && $(MAKE) $(MFLAGS) distclean)
+	-${top_distclean}
+
+### `realclean'
+###      Delete everything from the current directory that can be
+###      reconstructed with this Makefile.  This typically includes
+###      everything deleted by distclean, plus more: C source files
+###      produced by Bison, tags tables, info files, and so on.
+### 
+###      One exception, however: `make realclean' should not delete
+###      `configure' even if `configure' can be remade using a rule in the
+###      Makefile.  More generally, `make realclean' should not delete
+###      anything that needs to exist in order to run `configure' and then
+###      begin to build the program.
+realclean: FRC.realclean
+	(cd src      && $(MAKE) $(MFLAGS) realclean)
+	(cd lib-src  && $(MAKE) $(MFLAGS) realclean)
+	(cd lwlib    && $(MAKE) $(MFLAGS) realclean)
+	(cd dynodump && $(MAKE) $(MFLAGS) realclean)
+	-(cd man     && $(MAKE) $(MFLAGS) realclean)
+	-${top_distclean}
+
+### This doesn't actually appear in the coding standards, but Karl
+### says GCC supports it, and that's where the configuration part of
+### the coding standards seem to come from.  It's like distclean, but
+### it deletes backup and autosave files too.
+extraclean:
+	(cd src      && $(MAKE) $(MFLAGS) extraclean)
+	(cd lib-src  && $(MAKE) $(MFLAGS) extraclean)
+	(cd lwlib    && $(MAKE) $(MFLAGS) extraclean)
+	(cd dynodump && $(MAKE) $(MFLAGS) extraclean)
+	-(cd man     && $(MAKE) $(MFLAGS) extraclean)
+	-rm -f *~ \#*
+	-${top_distclean}
+
+### Unlocking and relocking.  The idea of these productions is to reduce
+### hassles when installing an incremental tar of XEmacs.  Do `make unlock'
+### before unlocking the file to take the write locks off all sources so
+### that tar xvof will overwrite them without fuss.  Then do `make relock'
+### afterward so that VC mode will know which files should be checked in
+### if you want to mung them.
+###
+### Note: it's no disaster if these productions miss a file or two; tar
+### and VC will swiftly let you know if this happens, and it is easily
+### corrected.
+SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
+	README build-install.in configure make-dist move-if-change
+
+.PHONY: unlock relock
+
+unlock:
+	chmod u+w $(SOURCES) cpp/*
+	-(cd elisp && chmod u+w Makefile README *.texi)
+	(cd etc     && $(MAKE) $(MFLAGS) unlock)
+	(cd lib-src && $(MAKE) $(MFLAGS) unlock)
+	(cd lisp    && $(MAKE) $(MFLAGS) unlock)
+	(cd lisp/term && chmod u+w README *.el)
+	(cd man && chmod u+w *texi* ChangeLog split-man)
+	(cd lwlib && chmod u+w *.[ch] Makefile.in.in)
+	(cd src && $(MAKE) $(MFLAGS) unlock)
+
+relock:
+	chmod u-w $(SOURCES) cpp/*
+	-(cd elisp && chmod u-w Makefile README *.texi)
+	(cd etc     && $(MAKE) $(MFLAGS) relock)
+	(cd lib-src && $(MAKE) $(MFLAGS) relock)
+	(cd lisp    && $(MAKE) $(MFLAGS) relock)
+	(cd lisp/term && chmod u+w README *.el)
+	(cd man && chmod u+w *texi* ChangeLog split-man)
+	(cd lwlib && chmod u+w *.[ch] Makefile.in.in)
+	(cd src && $(MAKE) $(MFLAGS) relock)
+
+.PHONY: TAGS tags check dist
+
+TAGS tags:
+	@echo "If you don't have a copy of etags around, then do 'make lib-src' first."
+	@PATH=`pwd`/lib-src:$$PATH ; echo "Using etags from `which etags`."
+	PATH=`pwd`/lib-src:$$PATH ; cd ${srcdir} ; \
+	etags --regex='| /[ 	]*DEFVAR_[A-Z_ 	(]+"\([^\"]+\)"/|' src/*.[ch] ; \
+	for d in `find lisp -name SCCS -prune -o -name RCS -prune -o -type d -print` ; do (cd $$d ; if [ "`echo *.el`" != "*.el" ] ; then etags -a -o ${srcdir}/TAGS *.el ; fi ) ; done ; \
+	etags -a lwlib/*.[ch]
+
+check:
+	@echo "We don't have any tests for XEmacs yet."
+
+dist:
+	cd ${srcdir} && make-dist
+
+.PHONY: info dvi
+force-info:
+info: force-info
+	(cd ${srcdir}/man && $(MAKE) $(MFLAGS) info)
+
+dvi:
+	(cd ${srcdir}/man && $(MAKE) $(MFLAGS) dvi)