xemacs-beta: man/info.texi comparison

comparison man/info.texi @ 5496:a7da359711ce

Backed out changeset e82f5b7010fe, incompatible with extant makeinfo.

author	Aidan Kehoe <kehoea@parhasard.net>
date	Mon, 02 May 2011 10:35:36 +0100
parents	e82f5b7010fe
children	64be8a494bdc

comparison

equal deleted inserted replaced

-:e82f5b7010fe
+:a7da359711ce
-\input texinfo.tex    @c -*-texinfo-*-
+\input texinfo    @c -*-texinfo-*-
-@c We must \input texinfo.tex instead of texinfo, otherwise make
-@c distcheck in the Texinfo distribution fails, because the texinfo Info
-@c file is made first, and texi2dvi must include . first in the path.
 @comment %**start of header
-@setfilename info.info
+@setfilename ../info/info.info
 @settitle Info
-@syncodeindex fn cp
-@syncodeindex vr cp
-@syncodeindex ky cp
 @comment %**end of header
-@c Synced up with: Texinfo 4.13.
+@comment $Id: info.texi,v 1.9 2001/04/13 09:11:28 michaels Exp $
-@c Synced by: Ben Wing, 2-19-10.
+@dircategory Texinfo documentation system
-@copying
+@direntry
+* Info: (info).                 Documentation browsing system.
+@end direntry
+@ifinfo
 This file describes how to use Info, the on-line, menu-driven GNU
 documentation system.
-Copyright @copyright{} 1989, 1992, 1996, 1997, 1998, 1999, 2000, 2001,
+Copyright (C) 1989, 92, 96, 97, 98, 99 Free Software Foundation, Inc.
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Permission is granted to make and distribute verbatim copies of
-@quotation
+this manual provided the copyright notice and this permission notice
-Permission is granted to copy, distribute and/or modify this document
+are preserved on all copies.
-under the terms of the GNU Free Documentation License, Version 1.2 or
-any later version published by the Free Software Foundation; with no
+@ignore
-Invariant Sections, with the Front-Cover texts being ``A GNU
+Permission is granted to process this file through TeX and print the
-Manual,'' and with the Back-Cover Texts as in (a) below.  A copy of the
+results, provided the printed document carries copying permission
-license is included in the section entitled ``GNU Free Documentation
+notice identical to this one except for the removal of this paragraph
-License'' in the XEmacs manual.
+(this paragraph not being relevant to the printed manual).
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and
+@end ignore
-modify this GNU Manual, like GNU software.  Buying copies from GNU
+Permission is granted to copy and distribute modified versions of this
-Press supports the FSF in developing GNU and promoting software
+manual under the conditions for verbatim copying, provided that the entire
-freedom.''
+resulting derived work is distributed under the terms of a permission
+notice identical to this one.
-This document is part of a collection distributed under the GNU Free
-Documentation License.  If you want to distribute this document
+Permission is granted to copy and distribute translations of this manual
-separately from the collection, you can do so by adding a copy of the
+into another language, under the above conditions for modified versions,
-license to the document, as described in section 6 of the license.
+except that this permission notice may be stated in a translation approved
-@end quotation
+by the Free Software Foundation.
-@end copying
+@end ifinfo
-@dircategory Texinfo documentation system
-@direntry
-* Info: (info).         How to use the documentation browsing system.
-@end direntry
 @titlepage
 @title Info
-@subtitle The online, hyper-text GNU documentation system
+@subtitle The online, menu-driven GNU documentation system
 @author Brian Fox
-@author and the GNU Texinfo community
 @page
 @vskip 0pt plus 1filll
-@insertcopying
+Copyright @copyright{} 1989, 92, 93, 96, 97, 98, 99 Free Software
+Foundation, Inc.
+@sp 2
+Published by the Free Software Foundation @*
+59 Temple Place - Suite 330 @*
+Boston, MA 02111-1307, USA.
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the entire
+resulting derived work is distributed under the terms of a permission
+notice identical to this one.
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions,
+except that this permission notice may be stated in a translation approved
+by the Free Software Foundation.
 @end titlepage
-@contents
-@ifnottex
 @node Top
 @top Info: An Introduction
-The GNU Project distributes most of its on-line manuals in the
+Info is a program for reading documentation, which you might be using
-@dfn{Info format}, which you read using an @dfn{Info reader}.  You are
+now to read this.
-probably using an Info reader to read this now.
+To learn how to use Info, type the command @kbd{h} while using the Info
-There are two primary Info readers: @code{info}, a stand-alone program
+program.  It brings you to a programmed instruction sequence.
-designed just to read Info files (@pxref{Top,,Stand-alone Info,
-info-stnd, GNU Info}), and the @code{info} package in XEmacs, a
-general-purpose editor.  At present, only the XEmacs reader supports
-using a mouse.
-@ifinfo
-If you are new to the Info reader and want to learn how to use it,
-type the command @kbd{h} now.  It brings you to a programmed
-instruction sequence.
-To read about advanced Info commands, type @kbd{n} twice.  This
-brings you to @cite{Advanced Info Commands}, skipping over the `Getting
-Started' chapter.
-@end ifinfo
-@end ifnottex
 @menu
 * Getting Started::             Getting started using an Info reader.
-* Advanced::                    Advanced Info commands.
+* Advanced Info::               Advanced commands within Info.
-* Expert Info::                 Info commands for experts.
+* Creating an Info File::       How to make your own Info file.
-* Index::                       An index of topics, commands, and variables.
 @end menu
-@node Getting Started, Advanced, Top, Top
+@node Getting Started, Advanced Info, Top, Top
 @comment  node-name,  next,  previous,  up
 @chapter Getting Started
-This first part of this Info manual describes how to get around inside
+This first part of the Info manual describes how to get around inside
 of Info.  The second part of the manual describes various advanced
-Info commands.  The third part briefly explains how to generate Info
+Info commands, and how to write an Info as distinct from a Texinfo
-files from Texinfo files, and describes how to write an Info file
+file.  The third part is about how to generate Info files from
-by hand.
+Texinfo files.
-@ifnotinfo
+@iftex
-This manual is primarily designed for browsing with an Info reader
+This manual is primarily designed for use on a computer, so that you can
-program on a computer, so that you can try Info commands while reading
+try Info commands while reading about them.  Reading it on paper is less
-about them.  Reading it on paper or with an HTML browser is less
 effective, since you must take it on faith that the commands described
-really do what the manual says.  By all means go through this manual
+really do what the manual says.  By all means go through this manual now
-now that you have it; but please try going through the on-line version
+that you have it; but please try going through the on-line version as
-as well.
+well.
-@cindex Info reader, how to invoke
-@cindex entering Info
 There are two ways of looking at the online version of this manual:
 @enumerate
 @item
 Type @code{info} at your shell's command line.  This approach uses a
-stand-alone program designed just to read Info files.
+small stand-alone program designed just to read Info files.
 @item
-Type @code{xemacs} at the command line; then type @kbd{C-h i}
+Type @code{emacs} at the command line; then type @kbd{C-h i} (Control
-(@kbd{Control-h}, followed by @kbd{i}).  This approach uses the Info
+@kbd{h}, followed by @kbd{i}).  This approach uses the Info mode of the
-mode of the XEmacs editor.
+Emacs program, an editor with many other capabilities.
 @end enumerate
 In either case, then type @kbd{mInfo} (just the letters), followed by
 @key{RET}---the ``Return'' or ``Enter'' key.  At this point, you should
 be ready to follow the instructions in this manual as you read them on
 the screen.
 @c FIXME! (pesch@cygnus.com, 14 dec 1992)
 @c Is it worth worrying about what-if the beginner goes to somebody
-@c else's XEmacs session, which already has an Info running in the middle
+@c else's Emacs session, which already has an Info running in the middle
 @c of something---in which case these simple instructions won't work?
-@end ifnotinfo
+@end iftex
 @menu
-* Help-Small-Screen::   Starting Info on a Small Screen.
+* Help-Small-Screen::   Starting Info on a Small Screen
-* Help::                How to use Info.
+* Help::                How to use Info
-* Help-P::              Returning to the Previous node.
+* Help-P::              Returning to the Previous node
-* Help-^L::             The Space, DEL, B and ^L commands.
+* Help-^L::             The Space, Rubout, B and ^L commands.
-* Help-Inv::            Invisible text in XEmacs Info.
+* Help-M::              Menus
-* Help-M::              Menus.
+* Help-Adv::            Some advanced Info commands
-* Help-Xref::           Following cross-references.
+* Help-Q::              Quitting Info
-* Help-Int::            Some intermediate Info commands.
-* Help-Q::              Quitting Info.
 @end menu
-@node Help-Small-Screen
+@node Help-Small-Screen, Help,  , Getting Started
+@comment  node-name,  next,  previous,  up
 @section Starting Info on a Small Screen
-@ifnotinfo
+@iftex
 (In Info, you only see this section if your terminal has a small
 number of lines; most readers pass by it without seeing it.)
-@end ifnotinfo
+@end iftex
-@cindex small screen, moving around
+Since your terminal has an unusually small number of lines on its
-Since your terminal has a relatively small number of lines on its
 screen, it is necessary to give you special advice at the beginning.
-If the entire text you are looking at fits on the screen, the text
+If you see the text @samp{--All----} at near the bottom right corner
-@samp{All} will be displayed at the bottom of the screen.  In the
+of the screen, it means the entire text you are looking at fits on the
-stand-alone Info reader, it is displayed at the bottom right corner of
+screen.  If you see @samp{--Top----} instead, it means that there is
-the screen; in XEmacs, it is displayed on the modeline.  If you see the
+more text below that does not fit.  To move forward through the text
-text @samp{Top} instead, it means that there is more text below that
+and see another screen full, press the Space bar, @key{SPC}.  To move
-does not fit.  To move forward through the text and see another screen
+back up, press the key labeled @samp{Backspace} or @key{Delete}.
-full, press @key{SPC}, the Space bar.  To move back up, press the key
-labeled @samp{Backspace} or @samp{DEL} (on some keyboards, this key
-might be labeled @samp{Delete}).
 @ifinfo
-Here are 40 lines of junk, so you can try @key{SPC} and @key{DEL} and
+Here are 40 lines of junk, so you can try Spaces and Deletes and
 see what they do.  At the end are instructions of what you should do
 next.
-@format
+This is line 17 @*
-This is line 20
+This is line 18 @*
-This is line 21
+This is line 19 @*
-This is line 22
+This is line 20 @*
-This is line 23
+This is line 21 @*
-This is line 24
+This is line 22 @*
-This is line 25
+This is line 23 @*
-This is line 26
+This is line 24 @*
-This is line 27
+This is line 25 @*
-This is line 28
+This is line 26 @*
-This is line 29
+This is line 27 @*
-This is line 30
+This is line 28 @*
-This is line 31
+This is line 29 @*
-This is line 32
+This is line 30 @*
-This is line 33
+This is line 31 @*
-This is line 34
+This is line 32 @*
-This is line 35
+This is line 33 @*
-This is line 36
+This is line 34 @*
-This is line 37
+This is line 35 @*
-This is line 38
+This is line 36 @*
-This is line 39
+This is line 37 @*
-This is line 40
+This is line 38 @*
-This is line 41
+This is line 39 @*
-This is line 42
+This is line 40 @*
-This is line 43
+This is line 41 @*
-This is line 44
+This is line 42 @*
-This is line 45
+This is line 43 @*
-This is line 46
+This is line 44 @*
-This is line 47
+This is line 45 @*
-This is line 48
+This is line 46 @*
-This is line 49
+This is line 47 @*
-This is line 50
+This is line 48 @*
-This is line 51
+This is line 49 @*
-This is line 52
+This is line 50 @*
-This is line 53
+This is line 51 @*
-This is line 54
+This is line 52 @*
-This is line 55
+This is line 53 @*
-This is line 56
+This is line 54 @*
-This is line 57
+This is line 55 @*
-This is line 58
+This is line 56 @*
-This is line 59
-@end format
 If you have managed to get here, go back to the beginning with
-@kbd{DEL} (or @key{BACKSPACE}), and come back here again, then you
+Delete, and come back here again, then you understand Space and
-understand the about the @samp{Space} and @samp{Backspace} keys.  So
+Delete.  So now type an @kbd{n} ---just one character; don't type
-now type an @kbd{n}---just one character; don't type the quotes and
+the quotes and don't type the Return key afterward--- to
-don't type the Return key afterward---to get to the normal start of
+get to the normal start of the course.
-the course.
 @end ifinfo
 @node Help, Help-P, Help-Small-Screen, Getting Started
 @comment  node-name,  next,  previous,  up
 @section How to use Info
 You are talking to the program Info, for reading documentation.
-There are two ways to use Info: from within XEmacs or as a
-stand-alone reader that you can invoke from a shell using the command
-@command{info}.
-@cindex node, in Info documents
 Right now you are looking at one @dfn{Node} of Information.
 A node contains text describing a specific topic at a specific
-level of detail.  This node's topic is ``how to use Info''.  The mode
+level of detail.  This node's topic is ``how to use Info''.
-line says that this is node @samp{Help} in the file @file{info}.
+The top line of a node is its @dfn{header}.  This node's header (look at
-@cindex header of Info node
+it now) says that it is the node named @samp{Help} in the file
-The top line of a node is its @dfn{header}.  This node's header
+@file{info}.  It says that the @samp{Next} node after this one is the node
-(look at it now) says that the @samp{Next} node after this one is the
+called @samp{Help-P}.  An advanced Info command lets you go to any node
-node called @samp{Help-P}.  An advanced Info command lets you go to
+whose name you know.
-any node whose name you know.  In the stand-alone Info reader program,
-the header line shows the names of this node and the Info file as
+Besides a @samp{Next}, a node can have a @samp{Previous} or an @samp{Up}.
-well.  In XEmacs, the header line is displayed with a special typeface,
+This node has a @samp{Previous} but no @samp{Up}, as you can see.
-and remains at the top of the window all the time even if you scroll
-through the node.
-Besides a @samp{Next}, a node can have a @samp{Previous} link, or an
-@samp{Up} link, or both.  As you can see, this node has all of these
-links.
-@kindex n @r{(Info mode)}
 Now it is time to move on to the @samp{Next} node, named @samp{Help-P}.
-@format
+>> Type @samp{n} to move there.  Type just one character;
->> Type @kbd{n} to move there.  Type just one character;
 do not type the quotes and do not type a @key{RET} afterward.
-@end format
-@noindent
 @samp{>>} in the margin means it is really time to try a command.
-@format
->> If you are in XEmacs and have a mouse, and if you already practiced
-typing @kbd{n} to get to the next node, click now with the left
-mouse button on the @samp{Next} link to do the same ``the mouse way''.
-@end format
 @node Help-P, Help-^L, Help, Getting Started
 @comment  node-name,  next,  previous,  up
 @section Returning to the Previous node
-@kindex p @r{(Info mode)}
 This node is called @samp{Help-P}.  The @samp{Previous} node, as you see,
 is @samp{Help}, which is the one you just came from using the @kbd{n}
 command.  Another @kbd{n} command now would take you to the next
 node, @samp{Help-^L}.
-@format
+>> But do not do that yet.  First, try the @kbd{p} command, which takes
->> But do not type @kbd{n} yet.  First, try the @kbd{p} command, or
+you to the @samp{Previous} node.  When you get there, you can do an
-(in XEmacs) click on the @samp{Prev} link.  That takes you to
+@kbd{n} again to return here.
-the @samp{Previous} node.  Then use @kbd{n} to return here.
-@end format
+This all probably seems insultingly simple so far, but @emph{do not} be
+led into skimming.  Things will get more complicated soon.  Also,
-If you read this in XEmacs, you will see an @samp{Info} item in the
+do not try a new command until you are told it is time to.  Otherwise,
-menu bar, close to its right edge.  Clicking the mouse on the
+you may make Info skip past an important warning that was coming up.
-@samp{Info} menu-bar item opens a menu of commands which include
-@samp{Next} and @samp{Previous} (and also some others which you didn't yet
+>> Now do an @kbd{n} to get to the node @samp{Help-^L} and learn more.
-learn about).
+@node Help-^L, Help-M, Help-P, Getting Started
-This all probably seems insultingly simple so far, but @emph{please
+@comment  node-name,  next,  previous,  up
-don't} start skimming.  Things will get complicated soon enough!
+@section The Space, Delete, B and ^L commands.
-Also, please do not try a new command until you are told it is time
-to.  You could make Info skip past an important warning that was
+This node's header tells you that you are now at node @samp{Help-^L}, and
-coming up.
+that @kbd{p} would get you back to @samp{Help-P}.  The node's title is
+underlined; it says what the node is about (most nodes have titles).
-@format
->> Now do an @kbd{n}, or (in XEmacs) click the middle mouse button on
-the @samp{Next} link, to get to the node @samp{Help-^L} and learn more.
-@end format
-@node Help-^L, Help-Inv, Help-P, Getting Started
-@comment  node-name,  next,  previous,  up
-@section The Space, DEL, B and ^L commands
-This node's mode line tells you that you are now at node
-@samp{Help-^L}, and the header line tells you that @kbd{p} would get
-you back to @samp{Help-P}.  The node's title is highlighted and may be
-underlined as well; it says what the node is about.
 This is a big node and it does not all fit on your display screen.
 You can tell that there is more that is not visible because you
-can see the text @samp{Top} rather than @samp{All} near the bottom of
+can see the string @samp{--Top-----} rather than @samp{--All----} near
-the screen.
+the bottom right corner of the screen.
-@kindex SPC @r{(Info mode)}
+The Space, Delete and @kbd{B} commands exist to allow you to ``move
-@kindex DEL @r{(Info mode)}
+around'' in a node that does not all fit on the screen at once.
-@kindex BACKSPACE @r{(Info mode)}
+Space moves forward, to show what was below the bottom of the screen.
-@findex Info-scroll-up
+Delete moves backward, to show what was above the top of the screen
-@findex Info-scroll-down
+(there is not anything above the top until you have typed some spaces).
-The @key{SPC}, @key{BACKSPACE} (or @key{DEL})@footnote{The key which
-we call ``Backspace or DEL'' in this manual is labeled differently on
+>> Now try typing a Space (afterward, type a Delete to return here).
-different keyboards.  Look for a key which is a little ways above the
-@key{ENTER} or @key{RET} key and which you normally use outside XEmacs
+When you type the space, the two lines that were at the bottom of
-to erase the character before the cursor, i.e.@: the character you
+the screen appear at the top, followed by more lines.  Delete takes
-typed last.  It might be labeled @samp{Backspace} or @samp{<-} or
+the two lines from the top and moves them to the bottom,
-@samp{DEL}, or sometimes @samp{Delete}.} and @kbd{b} commands exist to
+@emph{usually}, but if there are not a full screen's worth of lines
-allow you to ``move around'' in a node that does not all fit on the
+above them they may not make it all the way to the bottom.
-screen at once.  @key{SPC} moves forward, to show what was below the
-bottom of the screen.  @key{DEL} or @key{BACKSPACE} moves backward, to
+If you type Space when there is no more to see, it rings the
-show what was above the top of the screen (there is not anything above
+bell and otherwise does nothing.  The same goes for Delete when
-the top until you have typed some spaces).
+the header of the node is visible.
-@format
+If your screen is ever garbaged, you can tell Info to print it out
->> Now try typing a @key{SPC} (afterward, type a @key{BACKSPACE} to
+again by typing @kbd{C-l} (@kbd{Control-L}, that is---hold down ``Control'' and
-return here).
+type an @key{L} or @kbd{l}).
-@end format
-When you type the @key{SPC}, the two lines that were at the bottom of
-the screen appear at the top, followed by more lines.  @key{DEL} or
-@key{BACKSPACE} takes the two lines from the top and moves them to the
-bottom, @emph{usually}, but if there are not a full screen's worth of
-lines above them they may not make it all the way to the bottom.
-If you are reading this in XEmacs, note that the header line is
-always visible, never scrolling off the display.  That way, you can
-always see the @samp{Next}, @samp{Prev}, and @samp{Up} links, and you
-can conveniently go to one of these links at any time by
-clicking the middle mouse button on the link.
-@cindex reading Info documents top to bottom
-@cindex Info documents as tutorials
-@key{SPC} and @key{DEL} not only move forward and backward through
-the current node.  They also move between nodes.  @key{SPC} at the end
-of a node moves to the next node; @key{DEL} (or @key{BACKSPACE}) at
-the beginning of a node moves to the previous node.  In effect, these
-commands scroll through all the nodes in an Info file as a single
-logical sequence.  You can read an entire manual top to bottom by just
-typing @key{SPC}, and move backward through the entire manual from
-bottom to top by typing @key{DEL} (or @key{BACKSPACE}).
-In this sequence, a node's subnodes appear following their parent.
-If a node has a menu, @key{SPC} takes you into the subnodes listed in
-the menu, one by one.  Once you reach the end of a node, and have seen
-all of its subnodes, @key{SPC} takes you to the next node or to the
-parent's next node.
-@kindex PAGEUP @r{(Info mode)}
-@kindex PAGEDOWN @r{(Info mode)}
-Many keyboards nowadays have two scroll keys labeled @samp{PageUp}
-and @samp{PageDown} (or maybe @samp{Prior} and @samp{Next}).  If your
-keyboard has these keys, you can use them to move forward and backward
-through the text of one node, like @key{SPC} and @key{BACKSPACE} (or
-@key{DEL}).  However, @key{PAGEUP} and @key{PAGEDOWN} keys never
-scroll beyond the beginning or the end of the current node.
-@kindex C-l @r{(Info mode)}
-If your screen is ever garbaged, you can tell Info to display it
-again by typing @kbd{C-l} (@kbd{Control-L}---that is, hold down
-@key{CTRL} and type @kbd{L} or @kbd{l}).
-@format
 >> Type @kbd{C-l} now.
-@end format
-@kindex b @r{(Info mode)}
 To move back to the beginning of the node you are on, you can type
-the @key{BACKSPACE} key (or @key{DEL}) many times.  You can also type
+a lot of Deletes.  You can also type simply @kbd{b} for beginning.
-@kbd{b} just once.  @kbd{b} stands for ``beginning.''
-@format
 >> Try that now.  (We have put in enough verbiage to push this past
 the first screenful, but screens are so big nowadays that perhaps it
-isn't enough.  You may need to shrink your XEmacs or Info window.)
+isn't enough.  You may need to shrink your Emacs or Info window.)
-Then come back, by typing @key{SPC} one or more times.
+Then come back, with Spaces.
-@end format
+If your screen is very tall, all of this node might fit at once.
-@kindex ? @r{(Info mode)}
+In that case, "b" won't do anything.  Sorry; what can we do?
-@findex Info-summary
 You have just learned a considerable number of commands.  If you
 want to use one but have trouble remembering which, you should type
-@kbd{?}, which displays a brief list of commands.  When you are
+a @key{?} which prints out a brief list of commands.  When you are
-finished looking at the list, make it go away by typing @key{SPC}
+finished looking at the list, make it go away by pressing @key{SPC}
 repeatedly.
-@format
 >> Type a @key{?} now.  Press @key{SPC} to see consecutive screenfuls of
-the list until finished.  Then type @key{SPC} several times.  If
+>> the list until finished.
-you are using XEmacs, the help will then go away automatically.
-@end format
-(If you are using the stand-alone Info reader, type @kbd{C-x 0} to
-return here, that is---press and hold @key{CTRL}, type an @kbd{x},
-then release @key{CTRL} and @kbd{x}, and press @kbd{0}; that's a zero,
-not the letter ``o''.)
 From now on, you will encounter large nodes without warning, and
-will be expected to know how to use @key{SPC} and @key{BACKSPACE} to
+will be expected to know how to use Space and Delete to move
-move around in them without being told.  Since not all terminals have
+around in them without being told.  Since not all terminals have
 the same size screen, it would be impossible to warn you anyway.
-@format
+>> Now type @kbd{n} to see the description of the @kbd{m} command.
->> Now type @kbd{n}, or click the middle mouse button on the @samp{Next} link,
-to visit the next node.
+@node Help-M, Help-Adv, Help-^L, Getting Started
-@end format
+@comment  node-name,  next,  previous,  up
+@section Menus
-@node Help-Inv, Help-M, Help-^L, Getting Started
-@comment  node-name,  next,  previous,  up
+Menus and the @kbd{m} command
-@section Invisible text in XEmacs Info
+With only the @kbd{n} and @kbd{p} commands for moving between nodes, nodes
-Before discussing menus, we need to make some remarks that are only
+are restricted to a linear sequence.  Menus allow a branching
-relevant to users reading Info using XEmacs.  Users of the stand-alone
+structure.  A menu is a list of other nodes you can move to.  It is
-version can skip this node by typing @kbd{]} now.
+actually just part of the text of the node formatted specially so that
+Info can interpret it.  The beginning of a menu is always identified
-@cindex invisible text in XEmacs
+by a line which starts with @samp{* Menu:}.  A node contains a menu if and
-In XEmacs, certain text that appears in the stand-alone version is
+only if it has a line in it which starts that way.  The only menu you
-normally hidden, technically because it has the @samp{invisibility}
+can use at any moment is the one in the node you are in.  To use a
-property.  Invisible text is really a part of the text.  It becomes
+menu in any other node, you must move to that node first.
-visible (by default) after killing and yanking, it appears in printed
-output, it gets saved to file just like any other text, and so on.
-Thus it is useful to know it is there.
-@findex visible-mode
-You can make invisible text visible by using the command @kbd{M-x
-visible-mode}.  Visible mode is a minor mode, so using the command a
-second time will make the text invisible again.  Watch the effects of
-the command on the ``menu'' below and the top line of this node.
-If you prefer to @emph{always} see the invisible text, you can set
-@code{Info-hide-note-references} to @code{nil}.  Enabling Visible mode
-permanently is not a real alternative, because XEmacs Info also uses
-(although less extensively) another text property that can change the
-text being displayed, the @samp{display} property.  Only the
-invisibility property is affected by Visible mode.  When, in this
-tutorial, we refer to the @samp{XEmacs} behavior, we mean the
-@emph{default} XEmacs behavior.
-Now type @kbd{]}, to learn about the @kbd{]} and @kbd{[} commands.
-@menu
-* ]:         Help-].               Node telling about ].
-* stuff:     Help-].               Same node.
-* Help-]::                         Yet again, same node.
-@end menu
-@node Help-], , , Help-Inv
-@subsection The @kbd{]} and @kbd{[} commands
-If you type @kbd{n} now, you get an error message saying that this
-node has no next node.  Similarly, if you type @kbd{p}, the error
-message tells you that there is no previous node.  (The exact message
-depends on the Info reader you use.)  This is because @kbd{n} and
-@kbd{p} carry you to the next and previous node @emph{at the same
-level}.  The present node is contained in a menu (see next) of the
-node you came from, and hence is considered to be at a lower level.
-It is the only node in the previous node's menu (even though it was
-listed three times). Hence it has no next or previous node that
-@kbd{n} or @kbd{p} could move to.
-If you systematically move through a manual by typing @kbd{n}, you run
-the risk of skipping many nodes.  You do not run this risk if you
-systematically use @kbd{@key{SPC}}, because, when you scroll to the
-bottom of a node and type another @kbd{@key{SPC}}, then this carries
-you to the following node in the manual @emph{regardless of level}.
-If you immediately want to go to that node, without having to scroll
-to the bottom of the screen first, you can type @kbd{]}.
-Similarly, @kbd{@key{BACKSPACE}} carries you to the preceding node
-regardless of level, after you scrolled to the beginning of the
-present node.  If you want to go to the preceding node immediately,
-you can type @kbd{[}.
-For instance, typing this sequence will come back here in three steps:
-@kbd{[ n [}.  To do the same backward, type @kbd{] p ]}.
-Now type @kbd{]} to go to the next node and learn about menus.
-@node Help-M, Help-Xref, Help-Inv, Getting Started
-@comment  node-name,  next,  previous,  up
-@section Menus and the @kbd{m} command
-@cindex menus in an Info document
-@cindex Info menus
-With only the @kbd{n} (next), @kbd{p} (previous), @kbd{@key{SPC}},
-@kbd{@key{BACKSPACE}}, @kbd{]} and @kbd{[} commands for moving between
-nodes, nodes are restricted to a linear sequence.  Menus allow a
-branching structure.  A menu is a list of other nodes you can move to.
-It is actually just part of the text of the node formatted specially
-so that Info can interpret it.  The beginning of a menu is always
-identified by a line which starts with @w{@samp{* Menu:}}.  A node
-contains a menu if and only if it has a line in it which starts that
-way.  The only menu you can use at any moment is the one in the node
-you are in.  To use a menu in any other node, you must move to that
-node first.
 After the start of the menu, each line that starts with a @samp{*}
-identifies one subtopic.  The line usually contains a brief name for
+identifies one subtopic.  The line usually contains a brief name
-the subtopic (followed by a @samp{:}, normally hidden in XEmacs), the
+for the subtopic (followed by a @samp{:}), the name of the node that talks
-name of the node that talks about that subtopic (again, normally
+about that subtopic, and optionally some further description of the
-hidden in XEmacs), and optionally some further description of the
 subtopic.  Lines in the menu that do not start with a @samp{*} have no
 special meaning---they are only for the human reader's benefit and do
 not define additional subtopics.  Here is an example:
 @example
-* Foo:  Node about FOO.      This tells about FOO.
+* Foo:  FOO's Node      This tells about FOO
 @end example
-The subtopic name is Foo, and the node describing it is @samp{Node
+The subtopic name is Foo, and the node describing it is @samp{FOO's Node}.
-about FOO}.  The rest of the line is just for the reader's
+The rest of the line is just for the reader's Information.
-Information.  [[ But this line is not a real menu item, simply because
+[[ But this line is not a real menu item, simply because there is
-there is no line above it which starts with @w{@samp{* Menu:}}.  Also,
+no line above it which starts with @samp{* Menu:}.]]
-in a real menu item, the @samp{*} would appear at the very start of
-the line.  This is why the ``normally hidden'' text in XEmacs, namely
-@samp{: Node about FOO.}, is actually visible in this example, even
-when Visible mode is off.]]
 When you use a menu to go to another node (in a way that will be
 described soon), what you specify is the subtopic name, the first
 thing in the menu line.  Info uses it to find the menu line, extracts
 the node name from it, and goes to that node.  The reason that there
 specify.  Often the node name is convenient for the user to specify
 and so both it and the subtopic name are the same.  There is an
 abbreviation for this:
 @example
-* Foo::   This tells about FOO.
+* Foo::   This tells about FOO
 @end example
 @noindent
 This means that the subtopic name and node name are the same; they are
-both @samp{Foo}.  (The @samp{::} is normally hidden in XEmacs.)
+both @samp{Foo}.
-@format
+>> Now use Spaces to find the menu in this node, then come back to
->> Now use @key{SPC} to find the menu in this node, then come back to
+the front with a @kbd{b} and some Spaces.  As you see, a menu is
-the front with a @kbd{b} and some @key{SPC}s.  As you see, a menu is
 actually visible in its node.  If you cannot find a menu in a node
 by looking at it, then the node does not have a menu and the
 @kbd{m} command is not available.
-@end format
+The command to go to one of the subnodes is @kbd{m}---but @emph{do
-If you keep typing @key{SPC} once the menu appears on the screen, it
+not do it yet!}  Before you use @kbd{m}, you must understand the
-will move to another node (the first one in the menu).  If that
+difference between commands and arguments.  So far, you have learned
-happens, type @key{BACKSPACE} to come back.
+several commands that do not need arguments.  When you type one, Info
+processes it and is instantly ready for another command.  The @kbd{m}
-@kindex m @r{(Info mode)}
+command is different: it is incomplete without the @dfn{name of the
-The command to go to one of the subnodes is @kbd{m}.  This is very
+subtopic}.  Once you have typed @kbd{m}, Info tries to read the
-different from the commands you have used: it is a command that
+subtopic name.
-prompts you for more input.
+Now look for the line containing many dashes near the bottom of the
-The Info commands you know do not need additional input; when you
+screen.  There is one more line beneath that one, but usually it is
-type one of them, Info processes it instantly and then is ready for
+blank.  If it is empty, Info is ready for a command, such as @kbd{n}
-another command.  The @kbd{m} command is different: it needs to know
+or @kbd{b} or Space or @kbd{m}.  If that line contains text ending
-the @dfn{name of the subtopic}.  Once you have typed @kbd{m}, Info
+in a colon, it means Info is trying to read the @dfn{argument} to a
-tries to read the subtopic name.
+command.  At such times, commands do not work, because Info tries to
+use them as the argument.  You must either type the argument and
-Now, in the stand-alone Info, look for the line containing many
+finish the command you started, or type @kbd{Control-g} to cancel the
-dashes near the bottom of the screen.  (This is the stand-alone
+command.  When you have done one of those things, the line becomes
-equivalent for the mode line in XEmacs.)  There is one more line
+blank again.
-beneath that one, but usually it is blank.  (In XEmacs, this is the
-echo area.)  When it is blank, Info is ready for a command, such as
-@kbd{n} or @kbd{b} or @key{SPC} or @kbd{m}.  If that line contains
-text ending in a colon, it means Info is reading more input for the
-last command.  You can't type an Info command then, because Info is
-trying to read input, not commands.  You must either give the input
-and finish the command you started, or type @kbd{Control-g} to cancel
-the command.  When you have done one of those things, the input entry
-line becomes blank again.  Then you can type Info commands again.
-@findex Info-menu
 The command to go to a subnode via a menu is @kbd{m}.  After you type
 the @kbd{m}, the line at the bottom of the screen says @samp{Menu item: }.
 You must then type the name of the subtopic you want, and end it with
 a @key{RET}.
-@cindex abbreviating Info subnodes
 You can abbreviate the subtopic name.  If the abbreviation is not
 unique, the first matching subtopic is chosen.  Some menus put
 the shortest possible abbreviation for each subtopic name in capital
 letters, so you can see how much you need to type.  It does not
 matter whether you use upper case or lower case when you type the
 subtopic.  You should not put any spaces at the end, or inside of the
 item name, except for one space where a space appears in the item in
 the menu.
-@cindex completion of Info node names
+You can also use the @dfn{completion} feature to help enter the subtopic
-You can also use the @dfn{completion} feature to help enter the
+name.  If you type the Tab key after entering part of a name, it will
-subtopic name.  If you type the @key{TAB} key after entering part of a
+magically fill in more of the name---as much as follows uniquely from
-name, it will fill in more of the name---as much as Info can deduce
+what you have entered.
-from the part you have entered.
 If you move the cursor to one of the menu subtopic lines, then you do
-not need to type the argument: you just type a @key{RET}, and it
+not need to type the argument: you just type a Return, and it stands for
-stands for the subtopic of the line you are on.  You can also click
+the subtopic of the line you are on.
-the middle mouse button directly on the subtopic line to go there.
 Here is a menu to give you a chance to practice.  This menu gives you
 three ways of going to one place, Help-FOO:
 @menu
 * Foo:  Help-FOO.       A node you can visit for fun.
-* Bar:  Help-FOO.       We have made two ways to get to the same place.
+* Bar:  Help-FOO.       Strange!  two ways to get to the same place.
 * Help-FOO::            And yet another!
 @end menu
-(Turn Visible mode on if you are using XEmacs.)
-@format
 >>  Now type just an @kbd{m} and see what happens:
-@end format
 Now you are ``inside'' an @kbd{m} command.  Commands cannot be used
 now; the next thing you will type must be the name of a subtopic.
-You can change your mind about doing the @kbd{m} by typing
+You can change your mind about doing the @kbd{m} by typing Control-g.
-@kbd{Control-g}.
-@format
 >> Try that now;  notice the bottom line clear.
-@end format
-@format
 >> Then type another @kbd{m}.
-@end format
+>> Now type @samp{BAR} item name.  Do not type Return yet.
-@format
->> Now type @kbd{BAR}, the item name.  Do not type @key{RET} yet.
+While you are typing the item name, you can use the Delete key to
-@end format
+cancel one character at a time if you make a mistake.
-While you are typing the item name, you can use the @key{DEL} (or
+>> Type one to cancel the @samp{R}.  You could type another @samp{R} to
-@key{BACKSPACE}) key to cancel one character at a time if you make a
+replace it.  You do not have to, since @samp{BA} is a valid abbreviation.
-mistake.
-@format
->> Press @key{DEL} to cancel the @samp{R}.  You could type another @kbd{R}
-to replace it.  But you do not have to, since @samp{BA} is a valid
-abbreviation.
-@end format
-@format
 >> Now you are ready to go.  Type a @key{RET}.
-@end format
+After visiting Help-FOO, you should return here.
-After visiting @samp{Help-FOO}, you should return here.
-Another way to move to the menu subtopic lines and between them is
-to type @key{TAB}.  Each time you type a @key{TAB}, you move to the
-next subtopic line.  To move to a previous subtopic line in the
-stand-alone reader, type @kbd{M-@key{TAB}}---that is, press and hold
-the @key{META} key and then press @key{TAB}.  (On some keyboards, the
-@key{META} key might be labeled @samp{Alt}.)  In XEmacs Info, type
-@kbd{S-@key{TAB}} to move to a previous subtopic line (press and hold
-the @key{Shift} key and then press @key{TAB}).
-Once you move cursor to a subtopic line, press @key{RET} to go to
-that subtopic's node.
-@cindex mouse support in Info mode
-@kindex Mouse-2 @r{(Info mode)}
-If your terminal supports a mouse, you have yet another way of going
-to a subtopic.  Move your mouse pointer to the subtopic line,
-somewhere between the beginning @samp{*} and the colon @samp{:} which
-ends the subtopic's brief name.  You will see the subtopic's name
-change its appearance (usually, its background color will change), and
-the shape of the mouse pointer will change if your platform supports
-that.  After a while, if you leave the mouse on that spot, a small
-window will pop up, saying ``Mouse-2: go to that node,'' or the same
-message may appear at the bottom of the screen.
-@kbd{Mouse-2} is the second button of your mouse counting from the
-left---the middle button on a 3-button mouse.  (On a 2-button mouse,
-you may have to press both buttons together to ``press the middle
-button''.)  The message tells you pressing @kbd{Mouse-2} with the
-current position of the mouse pointer (on subtopic in the menu) will
-go to that subtopic.
-@findex Info-mouse-follow-nearest-node
-More generally, @kbd{Mouse-2} in an Info buffer finds the nearest
-link to another node and goes there.  For example, near a cross
-reference it acts like @kbd{f}, in a menu it acts like @kbd{m}, on the
-node's header line it acts like @kbd{n}, @kbd{p}, or @kbd{u}, etc.  At
-end of the node's text @kbd{Mouse-2} moves to the next node, or up if
-there's no next node.
-@format
 >> Type @kbd{n} to see more commands.
-@end format
+@c If a menu appears at the end of this node, remove it.
+@c It is an accident of the menu updating command.
+Here is another way to get to  Help-FOO, a menu.  You can ignore this
+if you want, or else try it (but then please come back to here).
+@menu
+* Help-FOO::
+@end menu
 @node Help-FOO,  ,  , Help-M
+@comment  node-name,  next,  previous,  up
 @subsection The @kbd{u} command
-Congratulations!  This is the node @samp{Help-FOO}.  It has an @samp{Up}
+Congratulations!  This is the node @samp{Help-FOO}.  Unlike the other
-pointer @samp{Help-M}, the node you just came from via the @kbd{m}
+nodes you have seen, this one has an @samp{Up}: @samp{Help-M}, the node you
-command.  This is the usual convention---the nodes you reach from a menu
+just came from via the @kbd{m} command.  This is the usual
-have @samp{Up} nodes that lead back to the menu.  Menus move Down in the
+convention---the nodes you reach from a menu have @samp{Up} nodes that lead
-tree, and @samp{Up} moves Up.  @samp{Previous}, on the other hand, is
+back to the menu.  Menus move Down in the tree, and @samp{Up} moves Up.
-usually used to ``stay on the same level but go backwards''.
+@samp{Previous}, on the other hand, is usually used to ``stay on the same
+level but go backwards''
-@kindex u @r{(Info mode)}
-@findex Info-up
 You can go back to the node @samp{Help-M} by typing the command
-@kbd{u} for ``Up''.  This puts you at the menu subtopic line pointing
+@kbd{u} for ``Up''.  That puts you at the @emph{front} of the
-to the subnode that the @kbd{u} command brought you from.  (Some Info
+node---to get back to where you were reading you have to type
-readers may put you at the @emph{front} of the node instead---to get
+some @key{SPC}s.
-back to where you were reading, you have to type some @key{SPC}s.)
-Another way to go Up is to click @kbd{Mouse-2} on the @samp{Up}
-pointer shown in the header line (provided that you have a mouse).
-@format
 >> Now type @kbd{u} to move back up to @samp{Help-M}.
-@end format
+@node Help-Adv, Help-Q, Help-M, Getting Started
-@node Help-Xref, Help-Int, Help-M, Getting Started
+@comment  node-name,  next,  previous,  up
-@comment  node-name,  next,  previous,  up
+@section Some advanced Info commands
-@section Following Cross-References
+The course is almost over, so please stick with it to the end.
-@cindex cross references in Info documents
-In Info documentation, you will see many @dfn{cross references}.
-Cross references look like this: @xref{Help-Cross, Cross}.  That text
-is a real, live cross reference, whose name is @samp{Cross} and which
-points to the node named @samp{Help-Cross}.  (The node name is hidden
-in XEmacs.  Do @kbd{M-x visible-mode} to show or hide it.)
-@kindex f @r{(Info mode)}
-@findex Info-follow-reference
-You can follow a cross reference by moving the cursor to it and
-press @key{RET}, just as in a menu.  In XEmacs, you can also click
-@kbd{Mouse-1} on a cross reference to follow it; you can see that the
-cross reference is mouse-sensitive by moving the mouse pointer to the
-reference and watching how the underlying text and the mouse pointer
-change in response.
-Another way to follow a cross reference is to type @kbd{f} and then
-specify the name of the cross reference (in this case, @samp{Cross})
-as an argument.  For this command, it does not matter where the cursor
-was.  If the cursor is on or near a cross reference, @kbd{f} suggests
-that reference name in parentheses as the default; typing @key{RET}
-will follow that reference.  However, if you type a different
-reference name, @kbd{f} will follow the other reference which has that
-name.
-@format
->> Type @kbd{f}, followed by @kbd{Cross}, and then @key{RET}.
-@end format
-As you enter the reference name, you can use the @key{DEL} (or
-@key{BACKSPACE}) key to edit your input.  If you change your mind
-about following any reference, you can use @kbd{Control-g} to cancel
-the command.  Completion is available in the @kbd{f} command; you can
-complete among all the cross reference names in the current node by
-typing a @key{TAB}.
-To get a list of all the cross references in the current node, you
-can type @kbd{?} after an @kbd{f}.  The @kbd{f} continues to await a
-cross reference name even after displaying the list, so if you don't
-actually want to follow a reference, you should type a @kbd{Control-g}
-to cancel the @kbd{f}.
-@format
->> Type @kbd{f?} to get a list of the cross references in this node.  Then
-type a @kbd{Control-g} and see how the @samp{f} gives up.
-@end format
-The @key{TAB}, @kbd{M-@key{TAB}} and @kbd{S-@key{TAB}} keys,
-which move between menu items in a menu, also move between cross
-references outside of menus.
-Sometimes a cross reference (or a node) can lead to another file (in
-other words another ``manual''), or, on occasion, even a file on a
-remote machine (although Info files distributed with XEmacs or the
-stand-alone Info avoid using remote links).  Such a cross reference
-looks like this: @xref{Top,, Overview of Texinfo, texinfo, Texinfo:
-The GNU Documentation Format}.  (After following this link, type
-@kbd{l} to get back to this node.)  Here the name @samp{texinfo}
-between parentheses refers to the file name.  This file name appears
-in cross references and node names if it differs from the current
-file, so you can always know that you are going to be switching to
-another manual and which one.
-However, XEmacs normally hides some other text in cross-references.
-If you put your mouse over the cross reference, then the information
-appearing in a separate box (tool tip) or in the echo area will show
-the full cross-reference including the file name and the node name of
-the cross reference.  If you have a mouse, just leave it over the
-cross reference @xref{Top,, Overview of Texinfo, texinfo, Texinfo:
-The GNU Documentation Format}, and watch what happens.  If you
-always like to have that information visible without having to move
-your mouse over the cross reference, use @kbd{M-x visible-mode}, or
-set @code{Info-hide-note-references} to a value other than @code{t}
-(@pxref{XEmacs Info Variables}).
-@format
->> Now type @kbd{n} to learn more commands.
-@end format
-@node Help-Int, Help-Q, Help-Xref, Getting Started
-@comment  node-name,  next,  previous,  up
-@section Some intermediate Info commands
-The introductory course is almost over; please continue
-a little longer to learn some intermediate-level commands.
-Most Info files have an index, which is actually a large node
-containing little but a menu.  The menu has one menu item for each
-topic listed in the index.  (As a special feature, menus for indices
-may also include the line number within the node of the index entry.
-This allows Info readers to go to the exact line of an entry, not just
-the start of the containing node.)
-You can get to the index from the main menu of the file with the
-@kbd{m} command and the name of the index node; then you can use the
-@kbd{m} command again in the index node to go to the node that
-describes the topic you want.
-There is also a short-cut Info command, @kbd{i}, which does all of
-that for you.  It searches the index for a given topic (a string) and
-goes to the node which is listed in the index for that topic.
-@xref{Search Index}, for a full explanation.
-@kindex l @r{(Info mode)}
-@findex Info-history-back
-@cindex going back in Info history
 If you have been moving around to different nodes and wish to
 retrace your steps, the @kbd{l} command (@kbd{l} for @dfn{last}) will
 do that, one node-step at a time.  As you move from node to node, Info
 records the nodes where you have been in a special history list.  The
 @kbd{l} command revisits nodes in the history list; each successive
 @kbd{l} command moves one step back through the history.
-@format
+If you have been following directions, ad @kbd{l} command now will get
->> Try typing @kbd{p p n} and then three @kbd{l}'s, pausing in between
+you back to @samp{Help-M}.  Another @kbd{l} command would undo the
-to see what each @kbd{l} does.  You should wind up right back here.
+@kbd{u} and get you back to @samp{Help-FOO}.  Another @kbd{l} would undo
-@end format
+the @kbd{m} and get you back to @samp{Help-M}.
+>> Try typing three @kbd{l}'s, pausing in between to see what each
+@kbd{l} does.
+Then follow directions again and you will end up back here.
 Note the difference between @kbd{l} and @kbd{p}: @kbd{l} moves to
 where @emph{you} last were, whereas @kbd{p} always moves to the node
-which the header says is the @samp{Previous} node (from this node, the
+which the header says is the @samp{Previous} node (from this node, to
-@samp{Prev} link leads to @samp{Help-Xref}).
+@samp{Help-M}).
-@kindex r @r{(Info mode)}
+The @samp{d} command gets you instantly to the Directory node.
-@findex Info-history-forward
+This node, which is the first one you saw when you entered Info,
-@cindex going forward in Info history
+has a menu which leads (directly, or indirectly through other menus),
-You can use the @kbd{r} command (@code{Info-history-forward} in XEmacs)
+to all the nodes that exist.
-to revisit nodes in the history list in the forward direction, so that
-@kbd{r} will return you to the node you came from by typing @kbd{l}.
+>> Try doing a @samp{d}, then do an @kbd{l} to return here (yes,
-@kindex L @r{(Info mode)}
-@findex Info-history
-@cindex history list of visited nodes
-The @kbd{L} command (@code{Info-history} in XEmacs) creates a virtual
-node that contains a list of all nodes you visited.  You can select
-a previously visited node from this menu to revisit it.
-@kindex d @r{(Info mode)}
-@findex Info-directory
-@cindex go to Directory node
-The @kbd{d} command (@code{Info-directory} in XEmacs) gets you
-instantly to the Directory node.  This node, which is the first one
-you saw when you entered Info, has a menu which leads (directly or
-indirectly, through other menus), to all the nodes that exist.  The
-Directory node lists all the manuals and other Info documents that
-are, or could be, installed on your system.
-@format
->> Try doing a @kbd{d}, then do an @kbd{l} to return here (yes,
 @emph{do} return).
-@end format
+Sometimes, in Info documentation, you will see a cross reference.
-@kindex t @r{(Info mode)}
+Cross references look like this: @xref{Help-Cross, Cross}.  That is a
-@findex Info-top-node
+real, live cross reference which is named @samp{Cross} and points at
-@cindex go to Top node
+the node named @samp{Help-Cross}.
-The @kbd{t} command moves to the @samp{Top} node of the manual.
-This is useful if you want to browse the manual's main menu, or select
+If you wish to follow a cross reference, you must use the @samp{f}
-some specific top-level menu item.  The XEmacs command run by @kbd{t}
+command.  The @samp{f} must be followed by the cross reference name
-is @code{Info-top-node}.
+(in this case, @samp{Cross}).  While you enter the name, you can use the
+Delete key to edit your input.  If you change your mind about following
-@format
+any reference, you can use @kbd{Control-g} to cancel the command.
+Completion is available in the @samp{f} command; you can complete among
+all the cross reference names in the current node by typing a Tab.
+>> Type @samp{f}, followed by @samp{Cross}, and a @key{RET}.
+To get a list of all the cross references in the current node, you can
+type @kbd{?} after an @samp{f}.  The @samp{f} continues to await a
+cross reference name even after printing the list, so if you don't
+actually want to follow a reference, you should type a @kbd{Control-g}
+to cancel the @samp{f}.
+>> Type "f?" to get a list of the cross references in this node.  Then
+type a @kbd{Control-g} and see how the @samp{f} gives up.
 >> Now type @kbd{n} to see the last node of the course.
-@end format
-@xref{Advanced}, for more advanced Info features.
 @c If a menu appears at the end of this node, remove it.
 @c It is an accident of the menu updating command.
-@node Help-Q,  , Help-Int, Getting Started
+@node Help-Cross,  ,  , Help-Adv
+@subsection The node reached by the cross reference in Info
+This is the node reached by the cross reference named @samp{Cross}.
+While this node is specifically intended to be reached by a cross
+reference, most cross references lead to nodes that ``belong'' someplace
+else far away in the structure of Info.  So you cannot expect the
+footnote to have a @samp{Next}, @samp{Previous} or @samp{Up} pointing
+back to where you came from.  In general, the @kbd{l} (el) command is
+the only way to get back there.
+>> Type @kbd{l} to return to the node where the cross reference was.
+@node Help-Q,  , Help-Adv, Getting Started
 @comment  node-name,  next,  previous,  up
 @section Quitting Info
-@kindex q @r{(Info mode)}
-@findex Info-exit
-@cindex quitting Info mode
 To get out of Info, back to what you were doing before, type @kbd{q}
-for @dfn{Quit}.  This runs @code{Info-exit} in XEmacs.
+for @dfn{Quit}.
-This is the end of the basic course on using Info.  You have learned
+This is the end of the course on using Info.  There are some other
-how to move in an Info document, and how to follow menus and cross
+commands that are meant for experienced users; they are useful, and you
-references.  This makes you ready for reading manuals top to bottom,
+can find them by looking in the directory node for documentation on
-as new users should do when they learn a new package.
+Info.  Finding them will be a good exercise in using Info in the usual
-Another set of Info commands is useful when you need to find
-something quickly in a manual---that is, when you need to use a manual
-as a reference rather than as a tutorial.  We urge you to learn
-these search commands as well.  If you want to do that now, follow this
-cross reference to @ref{Advanced}.
-Yet another set of commands are meant for experienced users; you can
-find them by looking in the Directory node for documentation on Info.
-Finding them will be a good exercise in using Info in the usual
 manner.
-@format
+>> Type @samp{d} to go to the Info directory node; then type
->> Type @kbd{d} to go to the Info directory node; then type
+@samp{mInfo} and Return, to get to the node about Info and
-@kbd{mInfo} and Return, to get to the node about Info and
 see what other help is available.
-@end format
+@node Advanced Info
-@node Advanced
+@chapter Info for Experts
-@chapter Advanced Info Commands
+This chapter describes various advanced Info commands, and how to write
-This chapter describes various advanced Info commands.  (If you
+an Info as distinct from a Texinfo file.  (However, in most cases, writing a
-are using a stand-alone Info reader, there are additional commands
+Texinfo file is better, since you can use it @emph{both} to generate an
-specific to it, which are documented in several chapters of @ref{Top,,
+Info file and to make a printed manual.  @xref{Top,, Overview of
-GNU Info, info-stnd, GNU Info}.)
+Texinfo, texinfo, Texinfo}.)
-@kindex C-q @r{(Info mode)}
-One advanced command useful with most of the others described here
-is @kbd{C-q}, which ``quotes'' the next character so that it is
-entered literally (@pxref{Inserting Text,,,xemacs,XEmacs User's
-Manual}).  For example, pressing @kbd{?} ordinarily brings up a list
-of completion possibilities.  If you want to (for example) search for
-an actual @samp{?} character, the simplest way is to insert it using
-@kbd{C-q ?}.  This works the same in XEmacs and stand-alone Info.
 @menu
-* Search Text::          How to search Info documents.
+* Expert::               Advanced Info commands: g, s, e, and 1 - 5.
-* Search Index::         How to search the indices for specific subjects.
+* Add::                  Describes how to add new nodes to the hierarchy.
-* Go to node::           How to go to a node by name.
+Also tells what nodes look like.
-* Choose menu subtopic:: How to choose a menu subtopic by its number.
+* Menus::                How to add to or create menus in Info nodes.
-* Create Info buffer::   How to create a new Info buffer in XEmacs.
+* Cross-refs::           How to add cross-references to Info nodes.
-* XEmacs Info Variables:: Variables modifying the behavior of XEmacs Info.
+* Tags::                 How to make tag tables for Info files.
+* Checking::             Checking an Info File
+* Emacs Info Variables:: Variables modifying the behavior of Emacs Info.
 @end menu
+@node Expert, Add,  , Advanced Info
-@node Search Text, Search Index,  , Advanced
+@comment  node-name,  next,  previous,  up
-@comment  node-name,  next,  previous,  up
+@section Advanced Info Commands
-@section @kbd{s} searches Info documents
+@kbd{g}, @kbd{s}, @kbd{1}, -- @kbd{9}, and @kbd{e}
-@cindex searching Info documents
-@cindex Info document as a reference
+If you know a node's name, you can go there by typing @kbd{g}, the
-The commands which move between and inside nodes allow you to read
+name, and @key{RET}.  Thus, @kbd{gTop@key{RET}} would go to the node
-the entire manual or its large portions.  But what if you need to find
+called @samp{Top} in this file (its directory node).
-some information in the manual as fast as you can, and you don't know
+@kbd{gExpert@key{RET}} would come back here.
-or don't remember in what node to look for it?  This need arises when
-you use a manual as a @dfn{reference}, or when it is impractical to
+Unlike @kbd{m}, @kbd{g} does not allow the use of abbreviations.
-read the entire manual before you start using the programs it
-describes.
+To go to a node in another file, you can include the filename in the
+node name by putting it at the front, in parentheses.  Thus,
-Info has powerful searching facilities that let you find things
+@kbd{g(dir)Top@key{RET}} would go to the Info Directory node, which is
-quickly.  You can search either the manual text or its indices.
+node @samp{Top} in the file @file{dir}.
-@kindex s @r{(Info mode)}
+The node name @samp{*} specifies the whole file.  So you can look at
-@findex Info-search
+all of the current file by typing @kbd{g*@key{RET}} or all of any
-The @kbd{s} command allows you to search a whole Info file for a string.
+other file with @kbd{g(FILENAME)@key{RET}}.
+The @kbd{s} command allows you to search a whole file for a string.
 It switches to the next node if and when that is necessary.  You
 type @kbd{s} followed by the string to search for, terminated by
 @key{RET}.  To search for the same string again, just @kbd{s} followed
 by @key{RET} will do.  The file's nodes are scanned in the order
-they are in the file, which has no necessary relationship to the
+they are in in the file, which has no necessary relationship to the
-order that they may be in the tree structure of menus and @samp{next}
+order that they may be in in the tree structure of menus and @samp{next}
 pointers.  But normally the two orders are not very different.  In any
-case, you can always look at the mode line to find out what node you have
+case, you can always do a @kbd{b} to find out what node you have
 reached, if the header is not visible (this can happen, because @kbd{s}
 puts your cursor at the occurrence of the string, not at the beginning
 of the node).
-@kindex M-s @r{(Info mode)}
+If you grudge the system each character of type-in it requires, you
-In XEmacs, @kbd{Meta-s} is equivalent to @kbd{s}.  That is for
+might like to use the commands @kbd{1}, @kbd{2}, @kbd{3}, @kbd{4}, ...
-compatibility with other GNU packages that use @kbd{M-s} for a similar
+@kbd{9}.  They are short for the @kbd{m} command together with an
-kind of search command.  Both @kbd{s} and @kbd{M-s} run in XEmacs the
+argument.  @kbd{1} goes through the first item in the current node's
-command @code{Info-search}.
+menu; @kbd{2} goes through the second item, etc.
-@kindex C-s @r{(Info mode)}
+If your display supports multiple fonts, and you are using Emacs' Info
-@kindex C-r @r{(Info mode)}
+mode to read Info files, the @samp{*} for the fifth menu item is
-@findex isearch
+underlined, and so is the @samp{*} for the ninth item; these underlines
-Instead of using @kbd{s} in XEmacs Info and in the stand-alone Info,
+make it easy to see at a glance which number to use for an item.
-you can use an incremental search started with @kbd{C-s} or @kbd{C-r}.
-It can search through multiple Info nodes.  @xref{Incremental Search,,,
+On ordinary terminals, you won't have underlining.  If you need to
-xemacs, XEmacs User's Manual}.  In XEmacs, you can disable this behavior
+actually count items, it is better to use @kbd{m} instead, and specify
-by setting the variable @code{Info-isearch-search} to @code{nil}
+the name.
-(@pxref{XEmacs Info Variables}).
+The Info command @kbd{e} changes from Info mode to an ordinary
-@node Search Index, Go to node, Search Text, Advanced
+Emacs editing mode, so that you can edit the text of the current node.
-@comment  node-name,  next,  previous,  up
+Type @kbd{C-c C-c} to switch back to Info.  The @kbd{e} command is allowed
-@section @kbd{i} searches the indices for specific subjects
+only if the variable @code{Info-enable-edit} is non-@code{nil}.
-@cindex searching Info indices
+@node Add, Menus, Expert, Advanced Info
-@kindex i @r{(Info mode)}
-@findex Info-index
-Since most topics in the manual should be indexed, you should try
-the index search first before the text search.  The @kbd{i} command
-prompts you for a subject and then looks up that subject in the
-indices.  If it finds an index entry with the subject you typed, it
-goes to the node to which that index entry points.  You should browse
-through that node to see whether the issue you are looking for is
-described there.  If it isn't, type @kbd{,} one or more times to go
-through additional index entries which match your subject.
-The @kbd{i} command and subsequent @kbd{,} commands find all index
-entries which include the string you typed @emph{as a substring}.
-For each match, Info shows in the echo area the full index entry it
-found.  Often, the text of the full index entry already gives you
-enough information to decide whether it is relevant to what you are
-looking for, so we recommend that you read what Info shows in the echo
-area before looking at the node it displays.
-Since @kbd{i} looks for a substring, you can search for subjects even
-if you are not sure how they are spelled in the index.  For example,
-suppose you want to find something that is pertinent to commands which
-complete partial input (e.g., when you type @key{TAB}).  If you want
-to catch index entries that refer to ``complete,'' ``completion,'' and
-``completing,'' you could type @kbd{icomplet@key{RET}}.
-Info documents which describe programs should index the commands,
-options, and key sequences that the program provides.  If you are
-looking for a description of a command, an option, or a key, just type
-their names when @kbd{i} prompts you for a topic.  For example, if you
-want to read the description of what the @kbd{C-l} key does, type
-@kbd{iC-l@key{RET}} literally.
-@findex info-apropos
-@findex index-apropos
-If you aren't sure which manual documents the topic you are looking
-for, try the @kbd{M-x info-apropos} command in XEmacs, or the @kbd{M-x
-index-apropos} command in the stand-alone reader.  It prompts for
-a string and then looks up that string in all the indices of all the
-Info documents installed on your system.
-@node Go to node, Choose menu subtopic, Search Index, Advanced
-@comment  node-name,  next,  previous,  up
-@section @kbd{g} goes to a node by name
-@kindex g @r{(Info mode)}
-@findex Info-goto-node
-@cindex go to a node by name
-If you know a node's name, you can go there by typing @kbd{g}, the
-name, and @key{RET}.  Thus, @kbd{gTop@key{RET}} would go to the node
-called @samp{Top} in this file.  (This is equivalent to @kbd{t}, see
-@ref{Help-Int}.)  @kbd{gGo to node@key{RET}} would come back here.
-Unlike @kbd{m}, @kbd{g} does not allow the use of abbreviations.
-But it does allow completion, so you can type @key{TAB} to complete a
-partial node name.
-@cindex go to another Info file
-To go to a node in another file, you can include the file name in the
-node name by putting it at the front, in parentheses.  Thus,
-@kbd{g(dir)Top@key{RET}} would go to the Info Directory node, which is
-the node @samp{Top} in the Info file @file{dir}.  Likewise,
-@kbd{g(xemacs)Top@key{RET}} goes to the top node of the XEmacs manual.
-The node name @samp{*} specifies the whole file.  So you can look at
-all of the current file by typing @kbd{g*@key{RET}} or all of any
-other file with @kbd{g(@var{filename})*@key{RET}}.
-@node Choose menu subtopic, Create Info buffer, Go to node, Advanced
-@comment  node-name,  next,  previous,  up
-@section @kbd{1}--@kbd{9} choose a menu subtopic by its number
-@kindex 1 @r{through} 9 @r{(Info mode)}
-@findex Info-nth-menu-item
-@cindex select @var{n}'th menu item
-If you begrudge each character of type-in which your system requires,
-you might like to use the commands @kbd{1}, @kbd{2}, @kbd{3}, @kbd{4},
-@dots{}, @kbd{9}.  They are short for the @kbd{m} command together
-with a name of a menu subtopic.  @kbd{1} goes through the first item
-in the current node's menu; @kbd{2} goes through the second item, etc.
-In the stand-alone reader, @kbd{0} goes through the last menu item;
-this is so you need not count how many entries are there.
-If your display supports multiple fonts, colors or underlining, and
-you are using XEmacs' Info mode to read Info files, the third, sixth
-and ninth menu items have a @samp{*} that stands out, either in color
-or in some other attribute, such as underline; this makes it easy to
-see at a glance which number to use for an item.
-Some terminals don't support either multiple fonts, colors or
-underlining.  If you need to actually count items, it is better to use
-@kbd{m} instead, and specify the name, or use @key{TAB} to quickly
-move between menu items.
-@node Create Info buffer, XEmacs Info Variables, Choose menu subtopic, Advanced
-@comment  node-name,  next,  previous,  up
-@section @kbd{M-n} creates a new independent Info buffer in XEmacs
-@kindex M-n @r{(Info mode)}
-@findex clone-buffer
-@cindex multiple Info buffers
-If you are reading Info in XEmacs, you can select a new independent
-Info buffer in a new XEmacs window by typing @kbd{M-n}.  The new buffer
-starts out as an exact copy of the old one, but you will be able to
-move independently between nodes in the two buffers.  (In Info mode,
-@kbd{M-n} runs the XEmacs command @code{clone-buffer}.)
-In XEmacs Info, you can also produce new Info buffers by giving a
-numeric prefix argument to the @kbd{m} and @kbd{g} commands.  @kbd{C-u
-m} and @kbd{C-u g} go to a new node in exactly the same way that
-@kbd{m} and @kbd{g} do, but they do so in a new Info buffer which they
-select in another window.
-Another way to produce new Info buffers in XEmacs is to use a numeric
-prefix argument for the @kbd{C-h i} command (@code{info}) which
-switches to the Info buffer with that number.  Thus, @kbd{C-u 2 C-h i}
-switches to the buffer @samp{*info*<2>}, creating it if necessary.
-@node XEmacs Info Variables, , Create Info buffer, Advanced
-@comment  node-name,  next,  previous,  up
-@section XEmacs Info-mode Variables
-The following variables may modify the behavior of Info-mode in XEmacs;
-you may wish to set one or several of these variables interactively,
-or in your init file.  @xref{Examining, Examining and Setting
-Variables, Examining and Setting Variables, xemacs, XEmacs User's
-Manual}.  The stand-alone Info reader program has its own set of
-variables, described in @ref{Variables,, Manipulating Variables,
-info-stnd, GNU Info}.
-@vtable @code
-@item Info-directory-list
-The list of directories to search for Info files.  Each element is a
-string (directory name) or @code{nil} (try default directory).  If not
-initialized Info uses the environment variable @env{INFOPATH} to
-initialize it, or @code{Info-default-directory-list} if there is no
-@env{INFOPATH} variable in the environment.
-If you wish to customize the Info directory search list for both XEmacs
-Info and stand-alone Info, it is best to set the @env{INFOPATH}
-environment variable, since that applies to both programs.
-@item Info-additional-directory-list
-A list of additional directories to search for Info documentation files.
-These directories are not searched for merging the @file{dir} file.
-@item Info-mode-hook
-Hooks run when @code{Info-mode} is called.  By default, it contains
-the hook @code{turn-on-font-lock} which enables highlighting of Info
-files.  You can change how the highlighting looks by customizing the
-faces @code{info-node}, @code{info-xref}, @code{info-xref-visited},
-@code{info-header-xref}, @code{info-header-node}, @code{info-menu-header},
-@code{info-menu-star}, and @code{info-title-@var{n}} (where @var{n}
-is the level of the section, a number between 1 and 4).  To customize
-a face, type @kbd{M-x customize-face @key{RET} @var{face} @key{RET}},
-where @var{face} is one of the face names listed here.
-@item Info-fontify-maximum-menu-size
-Maximum size of menu to fontify if @code{font-lock-mode} is non-@code{nil}.
-@item Info-fontify-visited-nodes
-If non-@code{nil}, menu items and cross-references pointing to visited
-nodes are displayed in the @code{info-xref-visited} face.
-@item Info-use-header-line
-If non-@code{nil}, XEmacs puts in the Info buffer a header line showing
-the @samp{Next}, @samp{Prev}, and @samp{Up} links.  A header line does
-not scroll with the rest of the buffer, making these links always
-visible.
-@item Info-hide-note-references
-As explained in earlier nodes, the XEmacs version of Info normally
-hides some text in menus and cross-references.  You can completely
-disable this feature, by setting this option to @code{nil}.  Setting
-it to a value that is neither @code{nil} nor @code{t} produces an
-intermediate behavior, hiding a limited amount of text, but showing
-all text that could potentially be useful.
-@item Info-scroll-prefer-subnodes
-If set to a non-@code{nil} value, @key{SPC} and @key{BACKSPACE} (or
-@key{DEL}) keys in a menu visit subnodes of the current node before
-scrolling to its end or beginning, respectively.  For example, if the
-node's menu appears on the screen, the next @key{SPC} moves to a
-subnode indicated by the following menu item.  Setting this option to
-@code{nil} results in behavior similar to the stand-alone Info reader
-program, which visits the first subnode from the menu only when you
-hit the end of the current node.  The default is @code{nil}.
-@item Info-isearch-search
-If non-@code{nil}, isearch in Info searches through multiple nodes.
-@item Info-enable-active-nodes
-When set to a non-@code{nil} value, allows Info to execute Lisp code
-associated with nodes.  The Lisp code is executed when the node is
-selected.  The Lisp code to be executed should follow the node
-delimiter (the @samp{DEL} character) and an @samp{execute: } tag, like
-this:
-@example
-^_execute: (message "This is an active node!")
-@end example
-@end vtable
-@node Expert Info
-@chapter Info for Experts
-This chapter explains how to write an Info file by hand.  However,
-in most cases, writing a Texinfo file is better, since you can use it
-to make a printed manual or produce other formats, such as HTML and
-DocBook, as well as for generating Info files.
-The @code{makeinfo} command converts a Texinfo file into an Info file;
-@code{texinfo-format-region} and @code{texinfo-format-buffer} are
-XEmacs functions that do the same.
-@xref{Top,, Overview of Texinfo, texinfo, Texinfo: The GNU
-Documentation Format}, for how to write a Texinfo file.
-@xref{Creating an Info File,,, texinfo, Texinfo: The GNU Documentation
-Format}, for how to create an Info file from a Texinfo file.
-@xref{Installing an Info File,,, texinfo, Texinfo: The GNU
-Documentation Format}, for how to install an Info file after you
-have created one.
-However, if you want to edit an Info file manually and install it manually,
-here is how.
-@menu
-* Add::                   Describes how to add new nodes to the hierarchy.
-Also tells what nodes look like.
-* Menus::                 How to add to or create menus in Info nodes.
-* Cross-refs::            How to add cross-references to Info nodes.
-* Tags::                  How to make tags tables for Info files.
-* Checking::              Checking an Info File.
-@end menu
-@node Add, Menus,  , Expert Info
 @comment  node-name,  next,  previous,  up
 @section Adding a new node to Info
 To add a new topic to the list in the Info directory, you must:
 @enumerate
 @item
 Create some nodes, in some file, to document that topic.
 @item
 Put that topic in the menu in the directory.  @xref{Menus, Menu}.
 @end enumerate
-@cindex node delimiters
+Usually, the way to create the nodes is with Texinfo (@pxref{Top,,
-The new node can live in an existing documentation file, or in a new
+Overview of Texinfo, texinfo, Texinfo}); this has the advantage that you
-one.  It must have a @samp{^_} character before it (invisible to the
+can also make a printed manual from them.  However, if you want to edit
+an Info file, here is how.
+The new node can live in an existing documentation file, or in a new
+one.  It must have a @key{^_} character before it (invisible to the
 user; this node has one but you cannot see it), and it ends with either
-a @samp{^_}, a @samp{^L} (``formfeed''), or the end of file.@footnote{If
+a @key{^_}, a @key{^L}, or the end of file.  Note: If you put in a
-you put in a @samp{^L} to end a new node, be sure that there is a
+@key{^L} to end a new node, be sure that there is a @key{^_} after it
-@samp{^_} after it to start the next one, since @samp{^L} cannot
+to start the next one, since @key{^L} cannot @emph{start} a node.
-@emph{start} a node.  Also, a nicer way to make a node boundary be a
+Also, a nicer way to make a node boundary be a page boundary as well
-page boundary as well is to put a @samp{^L} @emph{right after} the
+is to put a @key{^L} @emph{right after} the @key{^_}.
-@samp{^_}.}
+The @key{^_} starting a node must be followed by a newline or a
-The @samp{^_} starting a node must be followed by a newline or a
+@key{^L} newline, after which comes the node's header line.  The header
-@samp{^L} newline, after which comes the node's header line.  The
+line must give the node's name (by which Info finds it), and state the
-header line must give the node's name (by which Info finds it), and
+names of the @samp{Next}, @samp{Previous}, and @samp{Up} nodes (if there
-state the names of the @samp{Next}, @samp{Previous}, and @samp{Up}
+are any).  As you can see, this node's @samp{Up} node is the node
-nodes (if there are any).  As you can see, this node's @samp{Up} node
+@samp{Top}, which points at all the documentation for Info.  The
-is the node @samp{Expert Info}.  The @samp{Next} node is @samp{Menus}.
+@samp{Next} node is @samp{Menus}.
-@cindex node header line format
+The keywords @dfn{Node}, @dfn{Previous}, @dfn{Up}, and @dfn{Next},
-@cindex format of node headers
-The keywords @dfn{Node}, @dfn{Next}, @dfn{Previous}, and @dfn{Up}
 may appear in any order, anywhere in the header line, but the
 recommended order is the one in this sentence.  Each keyword must be
 followed by a colon, spaces and tabs, and then the appropriate name.
 The name may be terminated with a tab, a comma, or a newline.  A space
 does not end it; node names may contain spaces.  The case of letters
 in the names is insignificant.
-@cindex node name format
-@cindex Directory node
 A node name has two forms.  A node in the current file is named by
 what appears after the @samp{Node: } in that node's first line.  For
 example, this node's name is @samp{Add}.  A node in another file is
 named by @samp{(@var{filename})@var{node-within-file}}, as in
-@samp{(info)Add} for this node.  If the file name starts with @samp{./},
+@samp{(info)Add} for this node.  If the file name starts with ``./'',
-then it is relative to the current directory; otherwise, it is
+then it is relative to the current directory; otherwise, it is relative
-relative starting from the standard directory for Info files of your
+starting from the standard Info file directory of your site.
-site.  The name @samp{(@var{filename})Top} can be abbreviated to just
+The name @samp{(@var{filename})Top} can be abbreviated to just
-@samp{(@var{filename})}.  By convention, the name @samp{Top} is used
+@samp{(@var{filename})}.  By convention, the name @samp{Top} is used for
-for the ``highest'' node in any single file---the node whose @samp{Up}
+the ``highest'' node in any single file---the node whose @samp{Up} points
-points out of the file.  The @samp{Directory} node is @file{(dir)}, it
+out of the file.  The Directory node is @file{(dir)}.  The @samp{Top} node
-points to a file @file{dir} which holds a large menu listing all the
+of a document file listed in the Directory should have an @samp{Up:
-Info documents installed on your site.  The @samp{Top} node of a
-document file listed in the @samp{Directory} should have an @samp{Up:
 (dir)} in it.
-@cindex unstructured documents
 The node name @kbd{*} is special: it refers to the entire file.
 Thus, @kbd{g*} shows you the whole current file.  The use of the
 node @kbd{*} is to make it possible to make old-fashioned,
 unstructured files into nodes of the tree.
 The @samp{Node:} name, in which a node states its own name, must not
-contain a file name, since when Info searches for a node, it does not
+contain a filename, since Info when searching for a node does not expect
-expect a file name to be there.  The @samp{Next}, @samp{Previous} and
+one to be there.  The @samp{Next}, @samp{Previous} and @samp{Up} names
-@samp{Up} names may contain them.  In this node, since the @samp{Up}
+may contain them.  In this node, since the @samp{Up} node is in the same
-node is in the same file, it was not necessary to use one.
+file, it was not necessary to use one.
 Note that the nodes in this file have a file name in the header
 line.  The file names are ignored by Info, but they serve as comments
 to help identify the node for the user.
-@node Menus, Cross-refs, Add, Expert Info
+@node Menus, Cross-refs, Add, Advanced Info
 @comment  node-name,  next,  previous,  up
 @section How to Create Menus
 Any node in the Info hierarchy may have a @dfn{menu}---a list of subnodes.
 The @kbd{m} command searches the current node's menu for the topic which it
 reads from the terminal.
-@cindex menu and menu entry format
+A menu begins with a line starting with @samp{* Menu:}.  The rest of the
-A menu begins with a line starting with @w{@samp{* Menu:}}.  The
+line is a comment.  After the starting line, every line that begins
-rest of the line is a comment.  After the starting line, every line
+with a @samp{* } lists a single topic.  The name of the topic--the
-that begins with a @samp{* } lists a single topic.  The name of the
+argument that the user must give to the @kbd{m} command to select this
-topic---what the user must type at the @kbd{m}'s command prompt to
+topic---comes right after the star and space, and is followed by a
-select this topic---comes right after the star and space, and is
+colon, spaces and tabs, and the name of the node which discusses that
-followed by a colon, spaces and tabs, and the name of the node which
+topic.  The node name, like node names following @samp{Next}, @samp{Previous}
-discusses that topic.  The node name, like node names following
+and @samp{Up}, may be terminated with a tab, comma, or newline; it may also
-@samp{Next}, @samp{Previous} and @samp{Up}, may be terminated with a
+be terminated with a period.
-tab, comma, or newline; it may also be terminated with a period.
 If the node name and topic name are the same, then rather than
-giving the name twice, the abbreviation @samp{* @var{name}::} may be
+giving the name twice, the abbreviation @samp{* NAME::} may be used
-used (and should be used, whenever possible, as it reduces the visual
+(and should be used, whenever possible, as it reduces the visual
 clutter in the menu).
 It is considerate to choose the topic names so that they differ
 from each other very near the beginning---this allows the user to type
 short abbreviations.  In a long menu, it is a good idea to capitalize
 the beginning of each item name which is the minimum acceptable
 abbreviation for it (a long menu is more than 5 or so entries).
-The nodes listed in a node's menu are called its ``subnodes,'' and it
+The nodes listed in a node's menu are called its ``subnodes'', and it
 is their ``superior''.  They should each have an @samp{Up:} pointing at
 the superior.  It is often useful to arrange all or most of the subnodes
 in a sequence of @samp{Next} and @samp{Previous} pointers so that
 someone who wants to see them all need not keep revisiting the Menu.
 The Info Directory is simply the menu of the node @samp{(dir)Top}---that
 is, node @samp{Top} in file @file{.../info/dir}.  You can put new entries
 in that menu just like any other menu.  The Info Directory is @emph{not} the
 same as the file directory called @file{info}.  It happens that many of
-Info's files live in that file directory, but they do not have to; and
+Info's files live on that file directory, but they do not have to; and
-files in that directory are not automatically listed in the Info
+files on that directory are not automatically listed in the Info
 Directory node.
-Also, although the Info node graph is claimed to be a ``hierarchy,''
+Also, although the Info node graph is claimed to be a ``hierarchy'',
 in fact it can be @emph{any} directed graph.  Shared structures and
 pointer cycles are perfectly possible, and can be used if they are
 appropriate to the meaning to be expressed.  There is no need for all
 the nodes in a file to form a connected structure.  In fact, this file
 has two connected components.  You are in one of them, which is under
 the node @samp{Top}; the other contains the node @samp{Help} which the
 @kbd{h} command goes to.  In fact, since there is no garbage
-collector on the node graph, nothing terrible happens if a substructure
+collector, nothing terrible happens if a substructure is not pointed
-is not pointed to, but such a substructure is rather useless since nobody
+to, but such a substructure is rather useless since nobody can
-can ever find out that it exists.
+ever find out that it exists.
-@node Cross-refs, Tags, Menus, Expert Info
+@node Cross-refs, Tags, Menus, Advanced Info
 @comment  node-name,  next,  previous,  up
 @section Creating Cross References
-@cindex cross reference format
 A cross reference can be placed anywhere in the text, unlike a menu
 item which must go at the front of a line.  A cross reference looks
-like a menu item except that it has @samp{*note} instead of @samp{*}.
+like a menu item except that it has @samp{*note} instead of @kbd{*}.
 It @emph{cannot} be terminated by a @samp{)}, because @samp{)}'s are
 so often part of node names.  If you wish to enclose a cross reference
 in parentheses, terminate it with a period first.  Here are two
 examples of cross references pointers:
 @example
 *Note details: commands.  (See *note 3: Full Proof.)
 @end example
-@noindent
+They are just examples.  The places they ``lead to'' do not really exist!
-@emph{These are just examples.}  The places they ``lead to'' do not
-really exist!
+@node Tags, Checking, Cross-refs, Advanced Info
+@comment  node-name,  next,  previous,  up
-@menu
+@section Tag Tables for Info Files
-* Help-Cross::                  Target of a cross-reference.
-@end menu
-@node Help-Cross,  ,  , Cross-refs
-@subsection The node reached by the cross reference in Info
-This is the node reached by the cross reference named @samp{Cross}.
-While this node is specifically intended to be reached by a cross
-reference, most cross references lead to nodes that ``belong''
-someplace else far away in the structure of an Info document.  So you
-cannot expect this node to have a @samp{Next}, @samp{Previous} or
-@samp{Up} links pointing back to where you came from.  In general, the
-@kbd{l} (el) command is the only way to get back there.
-@format
->> Type @kbd{l} to return to the node where the cross reference was.
-@end format
-@node Tags, Checking, Cross-refs, Expert Info
-@comment  node-name,  next,  previous,  up
-@section Tags Tables for Info Files
-@cindex tags tables in Info files
 You can speed up the access to nodes of a large Info file by giving
-it a tags table.  Unlike the tags table for a program, the tags table for
+it a tag table.  Unlike the tag table for a program, the tag table for
 an Info file lives inside the file itself and is used
 automatically whenever Info reads in the file.
-@findex Info-tagify
+To make a tag table, go to a node in the file using Emacs Info mode and type
-To make a tags table, go to a node in the file using XEmacs Info mode and type
 @kbd{M-x Info-tagify}.  Then you must use @kbd{C-x C-s} to save the
-file.  Info files produced by the @code{makeinfo} command that is part
+file.
-of the Texinfo package always have tags tables to begin with.
+Once the Info file has a tag table, you must make certain it is up
-@cindex stale tags tables
+to date.  If, as a result of deletion of text, any node moves back
-@cindex update Info tags table
-Once the Info file has a tags table, you must make certain it is up
-to date.  If you edit an Info file directly (as opposed to editing its
-Texinfo source), and, as a result of deletion of text, any node moves back
 more than a thousand characters in the file from the position
-recorded in the tags table, Info will no longer be able to find that
+recorded in the tag table, Info will no longer be able to find that
-node.  To update the tags table, use the @code{Info-tagify} command
+node.  To update the tag table, use the @code{Info-tagify} command again.
-again.
+An Info file tag table appears at the end of the file and looks like
-An Info file tags table appears at the end of the file and looks like
 this:
 @example
-^_^L
+^_
 Tag Table:
 File: info, Node: Cross-refs^?21419
 File: info,  Node: Tags^?22145
 ^_
 End Tag Table
 @end example
 @noindent
 Note that it contains one line per node, and this line contains
 the beginning of the node's header (ending just after the node name),
-a @samp{DEL} character, and the character position in the file of the
+a Delete character, and the character position in the file of the
 beginning of the node.
-@node Checking, , Tags, Expert Info
+@node Checking, Emacs Info Variables, Tags, Advanced Info
 @section Checking an Info File
 When creating an Info file, it is easy to forget the name of a node when
 you are making a pointer to it from another node.  If you put in the
 wrong name for a node, this is not detected until someone tries to go
 addition, any @samp{Next} which does not have a @samp{Previous} pointing
 back is reported.  Only pointers within the file are checked, because
 checking pointers to other files would be terribly slow.  But those are
 usually few.
-@findex Info-validate
 To check an Info file, do @kbd{M-x Info-validate} while looking at any
-node of the file with XEmacs Info mode.
+node of the file with Emacs Info mode.
-@node Index
+@node Emacs Info Variables, , Checking, Advanced Info
-@unnumbered Index
+@section Emacs Info-mode Variables
-This is an alphabetical listing of all the commands, variables, and
+The following variables may modify the behavior of Info-mode in Emacs;
-topics discussed in this document.
+you may wish to set one or several of these variables interactively, or
+in your @file{~/.emacs} init file.  @xref{Examining, Examining and
-@printindex cp
+Setting Variables, Examining and Setting Variables, xemacs, XEmacs
+User's Manual}.
+@vtable @code
+@item Info-enable-edit
+Set to @code{nil}, disables the @samp{e} (@code{Info-edit}) command.  A
+non-@code{nil} value enables it.  @xref{Add, Edit}.
+@item Info-enable-active-nodes
+When set to a non-@code{nil} value, allows Info to execute Lisp code
+associated with nodes.  The Lisp code is executed when the node is
+selected.
+@item Info-directory-list
+The list of directories to search for Info files.  Each element is a
+string (directory name) or @code{nil} (try default directory).
+@item Info-directory
+The standard directory for Info documentation files.  Only used when the
+function @code{Info-directory} is called.
+@end vtable
+@node Creating an Info File
+@chapter Creating an Info File
+@xref{Top,, Overview of Texinfo, texinfo, Texinfo}, to learn how to
+write a Texinfo file.
+@xref{Create an Info File, , Creating an Info File, texinfo, Texinfo},
+to learn how to create an Info file from a Texinfo file.
+@xref{Install an Info File, , Installing an Info File, texinfo, Texinfo},
+to learn how to install an Info file after you have created one.
 @bye
-@ignore
-arch-tag: 965c1638-01d6-4156-9227-b10418b9d8e8
-@end ignore

Mercurial > hg > xemacs-beta

comparison man/info.texi @ 5496:a7da359711ce