xemacs-beta: lisp/modes/auto-autoloads.el comparison

comparison lisp/modes/auto-autoloads.el @ 163:0132846995bd r20-3b8

Import from CVS: tag r20-3b8

author	cvs
date	Mon, 13 Aug 2007 09:43:35 +0200
parents
children	5a88923fcbfe

comparison

equal deleted inserted replaced

-:4de2936b4e77
+:0132846995bd
+;;; DO NOT MODIFY THIS FILE
+(if (not (featurep 'modes-autoloads))
+(progn
+;;;### (autoloads nil "abbrev" "modes/abbrev.el")
+;;;***
+;;;### (autoloads (ada-make-filename-from-adaname ada-mode) "ada-mode" "modes/ada-mode.el")
+(autoload 'ada-mode "ada-mode" "\
+Ada Mode is the major mode for editing Ada code.
+Bindings are as follows: (Note: 'LFD' is control-j.)
+Indent line                                          '\\[ada-tab]'
+Indent line, insert newline and indent the new line. '\\[newline-and-indent]'
+Re-format the parameter-list point is in             '\\[ada-format-paramlist]'
+Indent all lines in region                           '\\[ada-indent-region]'
+Call external pretty printer program                 '\\[ada-call-pretty-printer]'
+Adjust case of identifiers and keywords in region    '\\[ada-adjust-case-region]'
+Adjust case of identifiers and keywords in buffer    '\\[ada-adjust-case-buffer]'
+Call EXTERNAL pretty printer (if you have one)       '\\[ada-call-pretty-printer]'
+Fill comment paragraph                               '\\[ada-fill-comment-paragraph]'
+Fill comment paragraph and justify each line         '\\[ada-fill-comment-paragraph-justify]'
+Fill comment paragraph, justify and append postfix   '\\[ada-fill-comment-paragraph-postfix]'
+Next func/proc/task '\\[ada-next-procedure]'    Previous func/proc/task '\\[ada-previous-procedure]'
+Next package        '\\[ada-next-package]'  Previous package        '\\[ada-previous-package]'
+Goto matching start of current 'end ...;'            '\\[ada-move-to-start]'
+Goto end of current block                            '\\[ada-move-to-end]'
+Comments are handled using standard GNU Emacs conventions, including:
+Start a comment                                      '\\[indent-for-comment]'
+Comment region                                       '\\[comment-region]'
+Uncomment region                                     '\\[ada-uncomment-region]'
+Continue comment on next line                        '\\[indent-new-comment-line]'
+If you use imenu.el:
+Display index-menu of functions & procedures         '\\[imenu]'
+If you use find-file.el:
+Switch to other file (Body <-> Spec)                 '\\[ff-find-other-file]'
+or '\\[ff-mouse-find-other-file]
+Switch to other file in other window                 '\\[ada-ff-other-window]'
+or '\\[ff-mouse-find-other-file-other-window]
+If you use this function in a spec and no body is available, it gets created
+with body stubs.
+If you use ada-xref.el:
+Goto declaration:          '\\[ada-point-and-xref]' on the identifier
+or '\\[ada-goto-declaration]' with point on the identifier
+Complete identifier:       '\\[ada-complete-identifier]'
+Execute Gnatf:             '\\[ada-gnatf-current]'" t nil)
+(autoload 'ada-make-filename-from-adaname "ada-mode" "\
+Determine the filename of a package/procedure from its own Ada name." t nil)
+;;;***
+;;;### (autoloads (archive-mode) "arc-mode" "modes/arc-mode.el")
+(autoload 'archive-mode "arc-mode" "\
+Major mode for viewing an archive file in a dired-like way.
+You can move around using the usual cursor motion commands.
+Letters no longer insert themselves.
+Type `e' to pull a file out of the archive and into its own buffer;
+or click mouse-2 on the file's line in the archive mode buffer.
+If you edit a sub-file of this archive (as with the `e' command) and
+save it, the contents of that buffer will be saved back into the
+archive.
+\\{archive-mode-map}" nil nil)
+;;;***
+;;;### (autoloads (asm-mode) "asm-mode" "modes/asm-mode.el")
+(autoload 'asm-mode "asm-mode" "\
+Major mode for editing typical assembler code.
+Features a private abbrev table and the following bindings:
+\\[asm-colon]	outdent a preceding label, tab to next tab stop.
+\\[tab-to-tab-stop]	tab to next tab stop.
+\\[asm-newline]	newline, then tab to next tab stop.
+\\[asm-comment]	smart placement of assembler comments.
+The character used for making comments is set by the variable
+`asm-comment-char' (which defaults to `?;').
+Alternatively, you may set this variable in `asm-mode-set-comment-hook',
+which is called near the beginning of mode initialization.
+Turning on Asm mode runs the hook `asm-mode-hook' at the end of initialization.
+Special commands:
+\\{asm-mode-map}
+" t nil)
+;;;***
+;;;### (autoloads (autoconf-mode) "autoconf-mode" "modes/autoconf-mode.el")
+(autoload 'autoconf-mode "autoconf-mode" "\
+A major-mode to edit autoconf input files like configure.in
+\\{autoconf-mode-map}
+" t nil)
+;;;***
+;;;### (autoloads (awk-mode) "awk-mode" "modes/awk-mode.el")
+(autoload 'awk-mode "awk-mode" "\
+Major mode for editing AWK code.
+This is much like C mode except for the syntax of comments.  It uses
+the same keymap as C mode and has the same variables for customizing
+indentation.  It has its own abbrev table and its own syntax table.
+Turning on AWK mode calls the value of the variable `awk-mode-hook'
+with no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (bibtex-mode) "bibtex" "modes/bibtex.el")
+(autoload 'bibtex-mode "bibtex" "\
+Major mode for editing bibtex files.
+\\{bibtex-mode-map}
+A command such as \\[bibtex-Book] will outline the fields for a BibTeX book entry.
+The optional fields start with the string OPT, and thus ignored by BibTeX.
+The OPT string may be removed from a field with \\[bibtex-remove-OPT].
+\\[bibtex-kill-optional-field] kills the current optional field entirely.
+\\[bibtex-remove-double-quotes] removes the double-quotes around the text of
+the current field.  \\[bibtex-empty-field] replaces the text of the current
+field with the default \"\".
+The command \\[bibtex-clean-entry] cleans the current entry, i.e. (i) removes
+double-quotes from entirely numerical fields, (ii) removes OPT from all
+non-empty optional fields, (iii) removes all empty optional fields, and (iv)
+checks that no non-optional fields are empty.
+Use \\[bibtex-find-text] to position the dot at the end of the current field.
+Use \\[bibtex-next-field] to move to end of the next field.
+The following may be of interest as well:
+Functions:
+find-bibtex-duplicates
+find-bibtex-entry-location
+hide-bibtex-entry-bodies
+sort-bibtex-entries
+validate-bibtex-buffer
+Variables:
+bibtex-clean-entry-zap-empty-opts
+bibtex-entry-field-alist
+bibtex-include-OPTannote
+bibtex-include-OPTcrossref
+bibtex-include-OPTkey
+bibtex-maintain-sorted-entries
+bibtex-mode-user-optional-fields
+Fields:
+address
+Publisher's address
+annote
+Long annotation used for annotated bibliographies (begins sentence)
+author
+Name(s) of author(s), in BibTeX name format
+booktitle
+Book title when the thing being referenced isn't the whole book.
+For book entries, the title field should be used instead.
+chapter
+Chapter number
+crossref
+	   The database key of the entry being cross referenced.
+edition
+Edition of a book (e.g., \"second\")
+editor
+Name(s) of editor(s), in BibTeX name format.
+If there is also an author field, then the editor field should be
+for the book or collection that the work appears in
+howpublished
+How something strange has been published (begins sentence)
+institution
+Sponsoring institution
+journal
+Journal name (macros are provided for many)
+key
+Alphabetizing and labeling key (needed when no author or editor)
+month
+Month (macros are provided)
+note
+To help the reader find a reference (begins sentence)
+number
+Number of a journal or technical report
+organization
+Organization (sponsoring a conference)
+pages
+Page number or numbers (use `--' to separate a range)
+publisher
+Publisher name
+school
+School name (for theses)
+series
+The name of a series or set of books.
+An individual book will also have its own title
+title
+The title of the thing being referenced
+type
+Type of a technical report (e.g., \"Research Note\") to be used
+instead of the default \"Technical Report\"
+volume
+Volume of a journal or multivolume work
+year
+Year---should contain only numerals
+---------------------------------------------------------
+Entry to this mode calls the value of bibtex-mode-hook if that value is
+non-nil." t nil)
+;;;***
+;;;### (autoloads (c-add-style c-set-style java-mode objc-mode c++-mode c-mode) "cc-mode" "modes/cc-mode.el")
+(autoload 'c-mode "cc-mode" "\
+Major mode for editing K&R and ANSI C code.
+To submit a problem report, enter `\\[c-submit-bug-report]' from a
+c-mode buffer.  This automatically sets up a mail buffer with version
+information already added.  You just need to add a description of the
+problem, including a reproducible test case and send the message.
+To see what version of CC Mode you are running, enter `\\[c-version]'.
+The hook variable `c-mode-hook' is run with no args, if that value is
+bound and has a non-nil value.  Also the hook `c-mode-common-hook' is
+run first.
+Key bindings:
+\\{c-mode-map}" t nil)
+(autoload 'c++-mode "cc-mode" "\
+Major mode for editing C++ code.
+To submit a problem report, enter `\\[c-submit-bug-report]' from a
+c++-mode buffer.  This automatically sets up a mail buffer with
+version information already added.  You just need to add a description
+of the problem, including a reproducible test case, and send the
+message.
+To see what version of CC Mode you are running, enter `\\[c-version]'.
+The hook variable `c++-mode-hook' is run with no args, if that
+variable is bound and has a non-nil value.  Also the hook
+`c-mode-common-hook' is run first.
+Key bindings:
+\\{c++-mode-map}" t nil)
+(autoload 'objc-mode "cc-mode" "\
+Major mode for editing Objective C code.
+To submit a problem report, enter `\\[c-submit-bug-report]' from an
+objc-mode buffer.  This automatically sets up a mail buffer with
+version information already added.  You just need to add a description
+of the problem, including a reproducible test case, and send the
+message.
+To see what version of CC Mode you are running, enter `\\[c-version]'.
+The hook variable `objc-mode-hook' is run with no args, if that value
+is bound and has a non-nil value.  Also the hook `c-mode-common-hook'
+is run first.
+Key bindings:
+\\{objc-mode-map}" t nil)
+(autoload 'java-mode "cc-mode" "\
+Major mode for editing Java code.
+To submit a problem report, enter `\\[c-submit-bug-report]' from an
+java-mode buffer.  This automatically sets up a mail buffer with
+version information already added.  You just need to add a description
+of the problem, including a reproducible test case and send the
+message.
+To see what version of CC Mode you are running, enter `\\[c-version]'.
+The hook variable `java-mode-hook' is run with no args, if that value
+is bound and has a non-nil value.  Also the common hook
+`c-mode-common-hook' is run first.  Note that this mode automatically
+sets the \"java\" style before calling any hooks so be careful if you
+set styles in `c-mode-common-hook'.
+Key bindings:
+\\{java-mode-map}" t nil)
+(autoload 'c-set-style "cc-mode" "\
+Set CC Mode variables to use one of several different indentation styles.
+STYLENAME is a string representing the desired style from the list of
+styles described in the variable `c-style-alist'.  See that variable
+for details of setting up styles.
+The variable `c-indentation-style' always contains the buffer's current
+style name." t nil)
+(autoload 'c-add-style "cc-mode" "\
+Adds a style to `c-style-alist', or updates an existing one.
+STYLE is a string identifying the style to add or update.  DESCRIP is
+an association list describing the style and must be of the form:
+((VARIABLE . VALUE) [(VARIABLE . VALUE) ...])
+See the variable `c-style-alist' for the semantics of VARIABLE and
+VALUE.  This function also sets the current style to STYLE using
+`c-set-style' if the optional SET-P flag is non-nil." t nil)
+(fset 'set-c-style           'c-set-style)
+;;;***
+;;;### (autoloads (common-lisp-indent-function) "cl-indent" "modes/cl-indent.el")
+(autoload 'common-lisp-indent-function "cl-indent" nil nil nil)
+;;;***
+;;;### (autoloads (c-macro-expand) "cmacexp" "modes/cmacexp.el")
+(autoload 'c-macro-expand "cmacexp" "\
+Expand C macros in the region, using the C preprocessor.
+Normally display output in temp buffer, but
+prefix arg means replace the region with it.
+`c-macro-preprocessor' specifies the preprocessor to use.
+Prompt for arguments to the preprocessor (e.g. `-DDEBUG -I ./include')
+if the user option `c-macro-prompt-flag' is non-nil.
+Noninteractive args are START, END, SUBST.
+For use inside Lisp programs, see also `c-macro-expansion'." t nil)
+;;;***
+;;;### (autoloads (eiffel-mode) "eiffel3" "modes/eiffel3.el")
+(autoload 'eiffel-mode "eiffel3" "\
+Major mode for editing Eiffel programs." t nil)
+;;;***
+;;;### (autoloads (enriched-decode enriched-encode enriched-mode) "enriched" "modes/enriched.el")
+(autoload 'enriched-mode "enriched" "\
+Minor mode for editing text/enriched files.
+These are files with embedded formatting information in the MIME standard
+text/enriched format.
+Turning the mode on runs `enriched-mode-hook'.
+More information about Enriched mode is available in the file
+etc/enriched.doc  in the Emacs distribution directory.
+Commands:
+\\<enriched-mode-map>\\{enriched-mode-map}" t nil)
+(autoload 'enriched-encode "enriched" nil nil nil)
+(autoload 'enriched-decode "enriched" nil nil nil)
+;;;***
+;;;### (autoloads (executable-self-display executable-set-magic) "executable" "modes/executable.el")
+(autoload 'executable-set-magic "executable" "\
+Set this buffer's interpreter to INTERPRETER with optional ARGUMENT.
+The variables `executable-magicless-file-regexp', `executable-prefix',
+`executable-insert', `executable-query' and `executable-chmod' control
+when and how magic numbers are inserted or replaced and scripts made
+executable." t nil)
+(autoload 'executable-self-display "executable" "\
+Turn a text file into a self-displaying Un*x command.
+The magic number of such a command displays all lines but itself." t nil)
+;;;***
+;;;### (autoloads (f90-mode) "f90" "modes/f90.el")
+(autoload 'f90-mode "f90" "\
+Major mode for editing Fortran 90 code in free format.
+\\[f90-indent-new-line] corrects current indentation and creates new indented line.
+\\[f90-indent-line] indents the current line correctly.
+\\[f90-indent-subprogram] indents the current subprogram.
+Type `? or `\\[help-command] to display a list of built-in abbrevs for F90 keywords.
+Key definitions:
+\\{f90-mode-map}
+Variables controlling indentation style and extra features:
+f90-do-indent
+Extra indentation within do blocks.  (default 3)
+f90-if-indent
+Extra indentation within if/select case/where/forall blocks. (default 3)
+f90-type-indent
+Extra indentation within type/interface/block-data blocks.  (default 3)
+f90-program-indent
+Extra indentation within program/module/subroutine/function blocks.
+(default 2)
+f90-continuation-indent
+Extra indentation applied to continuation lines.  (default 5)
+f90-comment-region
+String inserted by \\[f90-comment-region] at start of each line in
+region.  (default \"!!!$\")
+f90-indented-comment-re
+Regexp determining the type of comment to be intended like code.
+(default \"!\")
+f90-directive-comment-re
+Regexp of comment-like directive like \"!HPF\\\\$\", not to be indented.
+(default \"!hpf\\\\$\")
+f90-break-delimiters
+Regexp holding list of delimiters at which lines may be broken.
+(default \"[-+*/><=,% \\t]\")
+f90-break-before-delimiters
+Non-nil causes `f90-do-auto-fill' to break lines before delimiters.
+(default t)
+f90-beginning-ampersand
+Automatic insertion of & at beginning of continuation lines. (default t)
+f90-smart-end
+From an END statement, check and fill the end using matching block start.
+Allowed values are 'blink, 'no-blink, and nil, which determine
+whether to blink the matching beginning.) (default 'blink)
+f90-auto-keyword-case
+Automatic change of case of keywords. (default nil)
+The possibilities are 'downcase-word, 'upcase-word, 'capitalize-word.
+f90-leave-line-no
+Do not left-justify line numbers. (default nil)
+f90-startup-message
+Set to nil to inhibit message first time F90 mode is used. (default t)
+f90-keywords-re
+List of keywords used for highlighting/upcase-keywords etc.
+Turning on F90 mode calls the value of the variable `f90-mode-hook'
+with no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (follow-delete-other-windows-and-split follow-mode turn-off-follow-mode turn-on-follow-mode) "follow" "modes/follow.el")
+(add-minor-mode 'follow-mode nil 'follow-mode-map)
+(autoload 'turn-on-follow-mode "follow" "\
+Turn on Follow mode. Please see the function `follow-mode'." t nil)
+(autoload 'turn-off-follow-mode "follow" "\
+Turn off Follow mode. Please see the function `follow-mode'." t nil)
+(autoload 'follow-mode "follow" "\
+Minor mode which combines windows into one tall virtual window.
+The feeling of a \"virtual window\" has been accomplished by the use
+of two major techniques:
+* The windows always displays adjacent sections of the buffer.
+This means that whenever one window is moved, all the
+others will follow.  (Hence the name Follow Mode.)
+* Should the point (cursor) end up outside a window, another
+window displaying that point is selected, if possible.  This
+makes it possible to walk between windows using normal cursor
+movement commands.
+Follow mode comes to its prime when used on a large screen and two
+side-by-side window are used. The user can, with the help of Follow
+mode, use two full-height windows as though they would have been
+one. Imagine yourself editing a large function, or section of text,
+and being able to use 144 lines instead of the normal 72... (your
+mileage may vary).
+To split one large window into two side-by-side windows, the commands
+`\\[split-window-horizontally]' or `M-x follow-delete-other-windows-and-split' can be used.
+Only windows displayed in the same frame follow each-other.
+If the variable `follow-intercept-processes' is non-nil, Follow mode
+will listen to the output of processes and redisplay accordingly.
+\(This is the default.)
+When Follow mode is switched on, the hook `follow-mode-hook'
+is called.  When turned off, `follow-mode-off-hook' is called.
+Keys specific to Follow mode:
+\\{follow-mode-map}" t nil)
+(autoload 'follow-delete-other-windows-and-split "follow" "\
+Create two side by side windows and enter Follow Mode.
+Execute this command to display as much as possible of the text
+in the selected window.  All other windows, in the current
+frame, are deleted and the selected window is split in two
+side-by-side windows. Follow Mode is activated, hence the
+two windows always will display two successive pages.
+\(If one window is moved, the other one will follow.)
+If ARG is positive, the leftmost window is selected.  If it negative,
+the rightmost is selected.  If ARG is nil, the leftmost window is
+selected if the original window is the first one in the frame.
+To bind this command to a hotkey, place the following line
+in your `~/.emacs' file, replacing [f7] by your favourite key:
+(global-set-key [f7] 'follow-delete-other-windows-and-split)" t nil)
+;;;***
+;;;### (autoloads (fortran-mode) "fortran" "modes/fortran.el")
+(defcustom fortran-tab-mode-default nil "*Default tabbing/carriage control style for empty files in Fortran mode.\nA value of t specifies tab-digit style of continuation control.\nA value of nil specifies that continuation lines are marked\nwith a character in column 6." :type 'boolean :group 'fortran-indent)
+(autoload 'fortran-mode "fortran" "\
+Major mode for editing Fortran code.
+\\[fortran-indent-line] indents the current Fortran line correctly.
+DO statements must not share a common CONTINUE.
+Type ;? or ;\\[help-command] to display a list of built-in abbrevs for Fortran keywords.
+Key definitions:
+\\{fortran-mode-map}
+Variables controlling indentation style and extra features:
+comment-start
+Normally nil in Fortran mode.  If you want to use comments
+starting with `!', set this to the string \"!\".
+fortran-do-indent
+Extra indentation within do blocks.  (default 3)
+fortran-if-indent
+Extra indentation within if blocks.  (default 3)
+fortran-structure-indent
+Extra indentation within structure, union, map and interface blocks.
+(default 3)
+fortran-continuation-indent
+Extra indentation applied to continuation statements.  (default 5)
+fortran-comment-line-extra-indent
+Amount of extra indentation for text within full-line comments. (default 0)
+fortran-comment-indent-style
+nil    means don't change indentation of text in full-line comments,
+fixed  means indent that text at `fortran-comment-line-extra-indent' beyond
+the value of `fortran-minimum-statement-indent-fixed' (for fixed
+format continuation style) or `fortran-minimum-statement-indent-tab'
+(for TAB format continuation style).
+relative  means indent at `fortran-comment-line-extra-indent' beyond the
+	      indentation for a line of code.
+(default 'fixed)
+fortran-comment-indent-char
+Single-character string to be inserted instead of space for
+full-line comment indentation.  (default \" \")
+fortran-minimum-statement-indent-fixed
+Minimum indentation for Fortran statements in fixed format mode. (def.6)
+fortran-minimum-statement-indent-tab
+Minimum indentation for Fortran statements in TAB format mode. (default 9)
+fortran-line-number-indent
+Maximum indentation for line numbers.  A line number will get
+less than this much indentation if necessary to avoid reaching
+column 5.  (default 1)
+fortran-check-all-num-for-matching-do
+Non-nil causes all numbered lines to be treated as possible \"continue\"
+statements.  (default nil)
+fortran-blink-matching-if
+Non-nil causes \\[fortran-indent-line] on an ENDIF statement to blink on
+matching IF.  Also, from an ENDDO statement, blink on matching DO [WHILE]
+statement.  (default nil)
+fortran-continuation-string
+Single-character string to be inserted in column 5 of a continuation
+line.  (default \"$\")
+fortran-comment-region
+String inserted by \\[fortran-comment-region] at start of each line in
+region.  (default \"c$$$\")
+fortran-electric-line-number
+Non-nil causes line number digits to be moved to the correct column
+as typed.  (default t)
+fortran-break-before-delimiters
+Non-nil causes `fortran-fill' breaks lines before delimiters.
+(default t)
+fortran-startup-message
+Set to nil to inhibit message first time Fortran mode is used.
+Turning on Fortran mode calls the value of the variable `fortran-mode-hook'
+with no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (hide-ifdef-mode) "hideif" "modes/hideif.el")
+(add-minor-mode 'hide-ifdef-mode " Ifdef")
+(autoload 'hide-ifdef-mode "hideif" "\
+Toggle Hide-Ifdef mode.  This is a minor mode, albeit a large one.
+With ARG, turn Hide-Ifdef mode on if arg is positive, off otherwise.
+In Hide-Ifdef mode, code within #ifdef constructs that the C preprocessor
+would eliminate may be hidden from view.  Several variables affect
+how the hiding is done:
+hide-ifdef-env
+	An association list of defined and undefined symbols for the
+	current buffer.  Initially, the global value of `hide-ifdef-env'
+	is used.
+hide-ifdef-define-alist
+	An association list of defined symbol lists.
+Use `hide-ifdef-set-define-alist' to save the current `hide-ifdef-env'
+and `hide-ifdef-use-define-alist' to set the current `hide-ifdef-env'
+from one of the lists in `hide-ifdef-define-alist'.
+hide-ifdef-lines
+	Set to non-nil to not show #if, #ifdef, #ifndef, #else, and
+	#endif lines when hiding.
+hide-ifdef-initially
+	Indicates whether `hide-ifdefs' should be called when Hide-Ifdef mode
+	is activated.
+hide-ifdef-read-only
+	Set to non-nil if you want to make buffers read only while hiding.
+	After `show-ifdefs', read-only status is restored to previous value.
+\\{hide-ifdef-mode-map}" t nil)
+(defvar hide-ifdef-initially nil "\
+*Non-nil means call `hide-ifdefs' when Hide-Ifdef mode is first activated.")
+(defvar hide-ifdef-read-only nil "\
+*Set to non-nil if you want buffer to be read-only while hiding text.")
+(defvar hide-ifdef-lines nil "\
+*Non-nil means hide the #ifX, #else, and #endif lines.")
+;;;***
+;;;### (autoloads (hs-minor-mode hs-hide-block hs-hide-all) "hideshow" "modes/hideshow.el")
+(defvar hs-minor-mode nil "\
+Non-nil if using hideshow mode as a minor mode of some other mode.
+Use the command `hs-minor-mode' to toggle this variable.")
+(autoload 'hs-hide-all "hideshow" "\
+Hides all top-level blocks, displaying only first and last lines.
+It moves point to the beginning of the line, and it runs the normal hook
+`hs-hide-hook'.  See documentation for `run-hooks'." t nil)
+(autoload 'hs-hide-block "hideshow" "\
+Selects a block and hides it.  With prefix arg, reposition at end.
+Block is defined as a sexp for lispish modes, mode-specific otherwise.
+Comments are blocks, too.  Upon completion, point is at repositioned and
+the normal hook `hs-hide-hook' is run.  See documentation for `run-hooks'." t nil)
+(autoload 'hs-minor-mode "hideshow" "\
+Toggle hideshow minor mode.
+With ARG, turn hideshow minor mode on if ARG is positive, off otherwise.
+When hideshow minor mode is on, the menu bar is augmented with hideshow
+commands and the hideshow commands are enabled.  The variables
+`selective-display' and `selective-display-ellipses' are set to t.
+Last, the normal hook `hs-minor-mode-hook' is run; see the doc for `run-hooks'.
+Turning hideshow minor mode off reverts the menu bar and the
+variables to default values and disables the hideshow commands." t nil)
+;;;***
+;;;### (autoloads (icon-mode) "icon" "modes/icon.el")
+(autoload 'icon-mode "icon" "\
+Major mode for editing Icon code.
+Expression and list commands understand all Icon brackets.
+Tab indents for Icon code.
+Paragraphs are separated by blank lines only.
+Delete converts tabs to spaces as it moves back.
+\\{icon-mode-map}
+Variables controlling indentation style:
+icon-tab-always-indent
+Non-nil means TAB in Icon mode should always reindent the current line,
+regardless of where in the line point is when the TAB command is used.
+icon-auto-newline
+Non-nil means automatically newline before and after braces
+inserted in Icon code.
+icon-indent-level
+Indentation of Icon statements within surrounding block.
+The surrounding block's indentation is the indentation
+of the line on which the open-brace appears.
+icon-continued-statement-offset
+Extra indentation given to a substatement, such as the
+then-clause of an if or body of a while.
+icon-continued-brace-offset
+Extra indentation given to a brace that starts a substatement.
+This is in addition to `icon-continued-statement-offset'.
+icon-brace-offset
+Extra indentation for line if it starts with an open brace.
+icon-brace-imaginary-offset
+An open brace following other text is treated as if it were
+this far to the right of the start of its line.
+Turning on Icon mode calls the value of the variable `icon-mode-hook'
+with no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (imenu imenu-add-to-menubar) "imenu" "modes/imenu.el")
+(defvar imenu-generic-expression nil "\
+The regex pattern to use for creating a buffer index.
+If non-nil this pattern is passed to `imenu-create-index-with-pattern'
+to create a buffer index.
+It is an alist with elements that look like this: (MENU-TITLE
+REGEXP INDEX).
+MENU-TITLE is a string used as the title for the submenu or nil if the
+entries are not nested.
+REGEXP is a regexp that should match a construct in the buffer that is
+to be displayed in the menu; i.e., function or variable definitions,
+etc.  It contains a substring which is the name to appear in the
+menu.  See the info section on Regexps for more information.
+INDEX points to the substring in REGEXP that contains the name (of the
+function, variable or type) that is to appear in the menu.
+For emacs-lisp-mode for example PATTERN would look like:
+'((nil \"^\\\\s-*(def\\\\(un\\\\|subst\\\\|macro\\\\|advice\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2)
+(\"*Vars*\" \"^\\\\s-*(def\\\\(var\\\\|const\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2)
+(\"*Types*\" \"^\\\\s-*(def\\\\(type\\\\|struct\\\\|class\\\\|ine-condition\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2))
+The variable is buffer-local.")
+(make-variable-buffer-local 'imenu-generic-expression)
+(autoload 'imenu-add-to-menubar "imenu" "\
+Adds an `imenu' entry to the menu bar for the current buffer.
+NAME is a string used to name the menu bar item.
+See the command `imenu' for more information." t nil)
+(autoload 'imenu "imenu" "\
+Jump to a place in the buffer chosen using a buffer menu or mouse menu.
+See `imenu-choose-buffer-index' for more information." t nil)
+;;;***
+;;;### (autoloads (ksh-mode) "ksh-mode" "modes/ksh-mode.el")
+(autoload 'ksh-mode "ksh-mode" "\
+ksh-mode $Revision: 1.1 $ - Major mode for editing (Bourne, Korn or Bourne again)
+shell scripts.
+Special key bindings and commands:
+\\{ksh-mode-map}
+Variables controlling indentation style:
+ksh-indent
+Indentation of ksh statements with respect to containing block.
+Default value is 2.
+ksh-case-indent
+Additional indentation for statements under case items.
+Default value is nil which will align the statements one position
+past the \")\" of the pattern.
+ksh-case-item-offset
+Additional indentation for case items within a case statement.
+Default value is 2.
+ksh-group-offset
+Additional indentation for keywords \"do\" and \"then\".
+Default value is -2.
+ksh-brace-offset
+Additional indentation of \"{\" under functions or brace groupings.
+Default value is 0.
+ksh-multiline-offset
+Additional indentation of line that is preceded of a line ending with a
+\\ to make it continue on next line.
+ksh-tab-always-indent
+Controls the operation of the TAB key. If t (the default), always
+reindent the current line.  If nil, indent the current line only if
+point is at the left margin or in the line's indentation; otherwise
+insert a tab.
+ksh-match-and-tell
+If non-nil echo in the minibuffer the matching compound command
+for the \"done\", \"}\", \"fi\", or \"esac\". Default value is t.
+ksh-align-to-keyword
+Controls whether nested constructs align from the keyword or
+the current indentation. If non-nil, indentation will be relative to
+the column the keyword starts. If nil, indentation will be relative to
+the current indentation of the line the keyword is on.
+The default value is non-nil.
+ksh-comment-regexp
+Regular expression used to recognize comments. Customize to support
+ksh-like languages. Default value is \"\\s *#\".
+Style Guide.
+By setting
+(setq ksh-indent default-tab-width)
+(setq ksh-group-offset 0)
+The following style is obtained:
+if [ -z $foo ]
+	    then
+		    bar    # <-- ksh-group-offset is additive to ksh-indent
+		    foo
+fi
+By setting
+(setq ksh-indent default-tab-width)
+(setq ksh-group-offset (- 0 ksh-indent))
+The following style is obtained:
+if [ -z $foo ]
+then
+	    bar
+	    foo
+fi
+By setting
+(setq ksh-case-item-offset 1)
+(setq ksh-case-indent nil)
+The following style is obtained:
+case x in *
+foo) bar           # <-- ksh-case-item-offset
+baz;;         # <-- ksh-case-indent aligns with \")\"
+foobar) foo
+bar;;
+esac
+By setting
+(setq ksh-case-item-offset 1)
+(setq ksh-case-indent 6)
+The following style is obtained:
+case x in *
+foo) bar           # <-- ksh-case-item-offset
+baz;;        # <-- ksh-case-indent
+foobar) foo
+bar;;
+esac
+Installation:
+(setq ksh-mode-hook
+(function (lambda ()
+(font-lock-mode 1)             ;; font-lock the buffer
+(setq ksh-indent 8)
+	 (setq ksh-group-offset -8)
+	 (setq ksh-brace-offset -8)
+(setq ksh-tab-always-indent t)
+(setq ksh-match-and-tell t)
+(setq ksh-align-to-keyword t)	;; Turn on keyword alignment
+	 )))" t nil)
+;;;***
+;;;### (autoloads (define-mail-alias build-mail-aliases mail-aliases-setup) "mail-abbrevs" "modes/mail-abbrevs.el")
+(defcustom mail-abbrev-mailrc-file nil "Name of file with mail aliases.   If nil, ~/.mailrc is used." :type '(choice (const :tag "Default" nil) file) :group 'mail-abbrevs)
+(defvar mail-aliases nil "\
+Word-abbrev table of mail address aliases.
+If this is nil, it means the aliases have not yet been initialized and
+should be read from the .mailrc file.  (This is distinct from there being
+no aliases, which is represented by this being a table with no entries.)")
+(autoload 'mail-aliases-setup "mail-abbrevs" nil nil nil)
+(autoload 'build-mail-aliases "mail-abbrevs" "\
+Read mail aliases from .mailrc and set mail-aliases." nil nil)
+(autoload 'define-mail-alias "mail-abbrevs" "\
+Define NAME as a mail-alias that translates to DEFINITION.
+If DEFINITION contains multiple addresses, separate them with commas." t nil)
+;;;***
+;;;### (autoloads (makefile-mode) "make-mode" "modes/make-mode.el")
+(autoload 'makefile-mode "make-mode" "\
+Major mode for editing Makefiles.
+This function ends by invoking the function(s) `makefile-mode-hook'.
+\\{makefile-mode-map}
+In the browser, use the following keys:
+\\{makefile-browser-map}
+Makefile mode can be configured by modifying the following variables:
+makefile-browser-buffer-name:
+Name of the macro- and target browser buffer.
+makefile-target-colon:
+The string that gets appended to all target names
+inserted by `makefile-insert-target'.
+\":\" or \"::\" are quite common values.
+makefile-macro-assign:
+The string that gets appended to all macro names
+inserted by `makefile-insert-macro'.
+The normal value should be \" = \", since this is what
+standard make expects. However, newer makes such as dmake
+allow a larger variety of different macro assignments, so you
+might prefer to use \" += \" or \" := \" .
+makefile-tab-after-target-colon:
+If you want a TAB (instead of a space) to be appended after the
+target colon, then set this to a non-nil value.
+makefile-browser-leftmost-column:
+Number of blanks to the left of the browser selection mark.
+makefile-browser-cursor-column:
+Column in which the cursor is positioned when it moves
+up or down in the browser.
+makefile-browser-selected-mark:
+String used to mark selected entries in the browser.
+makefile-browser-unselected-mark:
+String used to mark unselected entries in the browser.
+makefile-browser-auto-advance-after-selection-p:
+If this variable is set to a non-nil value the cursor
+will automagically advance to the next line after an item
+has been selected in the browser.
+makefile-pickup-everything-picks-up-filenames-p:
+If this variable is set to a non-nil value then
+`makefile-pickup-everything' also picks up filenames as targets
+(i.e. it calls `makefile-find-filenames-as-targets'), otherwise
+filenames are omitted.
+makefile-cleanup-continuations-p:
+If this variable is set to a non-nil value then makefile-mode
+will assure that no line in the file ends with a backslash
+(the continuation character) followed by any whitespace.
+This is done by silently removing the trailing whitespace, leaving
+the backslash itself intact.
+IMPORTANT: Please note that enabling this option causes makefile-mode
+to MODIFY A FILE WITHOUT YOUR CONFIRMATION when \"it seems necessary\".
+makefile-browser-hook:
+A function or list of functions to be called just before the
+browser is entered. This is executed in the makefile buffer.
+makefile-special-targets-list:
+List of special targets. You will be offered to complete
+on one of those in the minibuffer whenever you enter a `.'.
+at the beginning of a line in Makefile mode." t nil)
+;;;***
+;;;### (autoloads (modula-2-mode) "modula2" "modes/modula2.el")
+(autoload 'modula-2-mode "modula2" "\
+This is a mode intended to support program development in Modula-2.
+All control constructs of Modula-2 can be reached by typing C-c
+followed by the first character of the construct.
+\\<m2-mode-map>
+\\[m2-begin] begin         \\[m2-case] case
+\\[m2-definition] definition    \\[m2-else] else
+\\[m2-for] for           \\[m2-header] header
+\\[m2-if] if            \\[m2-module] module
+\\[m2-loop] loop          \\[m2-or] or
+\\[m2-procedure] procedure     Control-c Control-w with
+\\[m2-record] record        \\[m2-stdio] stdio
+\\[m2-type] type          \\[m2-until] until
+\\[m2-var] var           \\[m2-while] while
+\\[m2-export] export        \\[m2-import] import
+\\[m2-begin-comment] begin-comment \\[m2-end-comment] end-comment
+\\[suspend-emacs] suspend Emacs     \\[m2-toggle] toggle
+\\[m2-compile] compile           \\[m2-next-error] next-error
+\\[m2-link] link
+`m2-indent' controls the number of spaces for each indentation.
+`m2-compile-command' holds the command to compile a Modula-2 program.
+`m2-link-command' holds the command to link a Modula-2 program." t nil)
+;;;***
+;;;### (autoloads (electric-nroff-mode nroff-mode) "nroff-mode" "modes/nroff-mode.el")
+(autoload 'nroff-mode "nroff-mode" "\
+Major mode for editing text intended for nroff to format.
+\\{nroff-mode-map}
+Turning on Nroff mode runs `text-mode-hook', then `nroff-mode-hook'.
+Also, try `nroff-electric-mode', for automatically inserting
+closing requests for requests that are used in matched pairs." t nil)
+(autoload 'electric-nroff-mode "nroff-mode" "\
+Toggle `nroff-electric-newline' minor mode.
+`nroff-electric-newline' forces Emacs to check for an nroff request at the
+beginning of the line, and insert the matching closing request if necessary.
+This command toggles that mode (off->on, on->off), with an argument,
+turns it on iff arg is positive, otherwise off." t nil)
+(defvar nroff-electric-mode nil "\
+Non-nil if in electric-nroff minor mode.")
+(add-minor-mode 'nroff-electric-mode " Electric" nil nil 'electric-nroff-mode)
+;;;***
+;;;### (autoloads (outl-mouse-minor-mode outl-mouse-mode) "outl-mouse" "modes/outl-mouse.el")
+(autoload 'outl-mouse-mode "outl-mouse" "\
+Calls outline-mode, with outl-mouse extensions" t nil)
+(autoload 'outl-mouse-minor-mode "outl-mouse" "\
+Toggles outline-minor-mode, with outl-mouse extensions" t nil)
+;;;***
+;;;### (autoloads (outline-minor-mode outline-mode) "outline" "modes/outline.el")
+(defvar outline-minor-mode nil "\
+Non-nil if using Outline mode as a minor mode of some other mode.")
+(make-variable-buffer-local 'outline-minor-mode)
+(put 'outline-minor-mode 'permanent-local t)
+(add-minor-mode 'outline-minor-mode " Outl")
+(autoload 'outline-mode "outline" "\
+Set major mode for editing outlines with selective display.
+Headings are lines which start with asterisks: one for major headings,
+two for subheadings, etc.  Lines not starting with asterisks are body lines.
+Body text or subheadings under a heading can be made temporarily
+invisible, or visible again.  Invisible lines are attached to the end
+of the heading, so they move with it, if the line is killed and yanked
+back.  A heading with text hidden under it is marked with an ellipsis (...).
+Commands:\\<outline-mode-map>
+\\[outline-next-visible-heading]   outline-next-visible-heading      move by visible headings
+\\[outline-previous-visible-heading]   outline-previous-visible-heading
+\\[outline-forward-same-level]   outline-forward-same-level        similar but skip subheadings
+\\[outline-backward-same-level]   outline-backward-same-level
+\\[outline-up-heading]   outline-up-heading		    move from subheading to heading
+\\[hide-body]	make all text invisible (not headings).
+\\[show-all]	make everything in buffer visible.
+The remaining commands are used when point is on a heading line.
+They apply to some of the body or subheadings of that heading.
+\\[hide-subtree]   hide-subtree	make body and subheadings invisible.
+\\[show-subtree]   show-subtree	make body and subheadings visible.
+\\[show-children]   show-children	make direct subheadings visible.
+		 No effect on body, or subheadings 2 or more levels down.
+		 With arg N, affects subheadings N levels down.
+\\[hide-entry]	   make immediately following body invisible.
+\\[show-entry]	   make it visible.
+\\[hide-leaves]	   make body under heading and under its subheadings invisible.
+		     The subheadings remain visible.
+\\[show-branches]  make all subheadings at all levels visible.
+The variable `outline-regexp' can be changed to control what is a heading.
+A line is a heading if `outline-regexp' matches something at the
+beginning of the line.  The longer the match, the deeper the level.
+Turning on outline mode calls the value of `text-mode-hook' and then of
+`outline-mode-hook', if they are non-nil." t nil)
+(autoload 'outline-minor-mode "outline" "\
+Toggle Outline minor mode.
+With arg, turn Outline minor mode on if arg is positive, off otherwise.
+See the command `outline-mode' for more information on this mode." t nil)
+;;;***
+;;;### (autoloads (pascal-mode) "pascal" "modes/pascal.el")
+(autoload 'pascal-mode "pascal" "\
+Major mode for editing Pascal code. \\<pascal-mode-map>
+TAB indents for Pascal code.  Delete converts tabs to spaces as it moves back.
+\\[pascal-complete-word] completes the word around current point with respect to position in code
+\\[pascal-show-completions] shows all possible completions at this point.
+Other useful functions are:
+\\[pascal-mark-defun]	- Mark function.
+\\[pascal-insert-block]	- insert begin ... end;
+\\[pascal-star-comment]	- insert (* ... *)
+\\[pascal-comment-area]	- Put marked area in a comment, fixing nested comments.
+\\[pascal-uncomment-area]	- Uncomment an area commented with \\[pascal-comment-area].
+\\[pascal-beg-of-defun]	- Move to beginning of current function.
+\\[pascal-end-of-defun]	- Move to end of current function.
+\\[pascal-goto-defun]	- Goto function prompted for in the minibuffer.
+\\[pascal-outline]	- Enter pascal-outline-mode (see also pascal-outline).
+Variables controlling indentation/edit style:
+pascal-indent-level      (default 3)
+Indentation of Pascal statements with respect to containing block.
+pascal-case-indent       (default 2)
+Indentation for case statements.
+pascal-auto-newline      (default nil)
+Non-nil means automatically newline after semicolons and the punctuation mark
+after an end.
+pascal-tab-always-indent (default t)
+Non-nil means TAB in Pascal mode should always reindent the current line,
+regardless of where in the line point is when the TAB command is used.
+pascal-auto-endcomments  (default t)
+Non-nil means a comment { ... } is set after the ends which ends cases and
+functions. The name of the function or case will be set between the braces.
+pascal-auto-lineup       (default t)
+List of contexts where auto lineup of :'s or ='s should be done.
+See also the user variables pascal-type-keywords, pascal-start-keywords and
+pascal-separator-keywords.
+Turning on Pascal mode calls the value of the variable pascal-mode-hook with
+no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (perl-mode) "perl-mode" "modes/perl-mode.el")
+(autoload 'perl-mode "perl-mode" "\
+Major mode for editing Perl code.
+Expression and list commands understand all Perl brackets.
+Tab indents for Perl code.
+Comments are delimited with # ... \\n.
+Paragraphs are separated by blank lines only.
+Delete converts tabs to spaces as it moves back.
+\\{perl-mode-map}
+Variables controlling indentation style:
+perl-tab-always-indent
+Non-nil means TAB in Perl mode should always indent the current line,
+regardless of where in the line point is when the TAB command is used.
+perl-tab-to-comment
+Non-nil means that for lines which don't need indenting, TAB will
+either delete an empty comment, indent an existing comment, move
+to end-of-line, or if at end-of-line already, create a new comment.
+perl-nochange
+Lines starting with this regular expression are not auto-indented.
+perl-indent-level
+Indentation of Perl statements within surrounding block.
+The surrounding block's indentation is the indentation
+of the line on which the open-brace appears.
+perl-continued-statement-offset
+Extra indentation given to a substatement, such as the
+then-clause of an if or body of a while.
+perl-continued-brace-offset
+Extra indentation given to a brace that starts a substatement.
+This is in addition to `perl-continued-statement-offset'.
+perl-brace-offset
+Extra indentation for line if it starts with an open brace.
+perl-brace-imaginary-offset
+An open brace following other text is treated as if it were
+this far to the right of the start of its line.
+perl-label-offset
+Extra indentation for line that is a label.
+Various indentation styles:       K&R  BSD  BLK  GNU  LW
+perl-indent-level                5    8    0    2    4
+perl-continued-statement-offset  5    8    4    2    4
+perl-continued-brace-offset      0    0    0    0   -4
+perl-brace-offset               -5   -8    0    0    0
+perl-brace-imaginary-offset      0    0    4    0    0
+perl-label-offset               -5   -8   -2   -2   -2
+Turning on Perl mode runs the normal hook `perl-mode-hook'." t nil)
+;;;***
+;;;### (autoloads (picture-mode) "picture" "modes/picture.el")
+(autoload 'picture-mode "picture" "\
+Switch to Picture mode, in which a quarter-plane screen model is used.
+Printing characters replace instead of inserting themselves with motion
+afterwards settable by these commands:
+C-c <	  Move left after insertion.
+C-c >	  Move right after insertion.
+C-c ^	  Move up after insertion.
+C-c .	  Move down after insertion.
+C-c `	  Move northwest (nw) after insertion.
+C-c '	  Move northeast (ne) after insertion.
+C-c /	  Move southwest (sw) after insertion.
+C-c \\   Move southeast (se) after insertion.
+The current direction is displayed in the modeline.  The initial
+direction is right.  Whitespace is inserted and tabs are changed to
+spaces when required by movement.  You can move around in the buffer
+with these commands:
+\\[picture-move-down]	  Move vertically to SAME column in previous line.
+\\[picture-move-up]	  Move vertically to SAME column in next line.
+\\[picture-end-of-line]	  Move to column following last non-whitespace character.
+\\[picture-forward-column]	  Move right inserting spaces if required.
+\\[picture-backward-column]	  Move left changing tabs to spaces if required.
+C-c C-f Move in direction of current picture motion.
+C-c C-b Move in opposite direction of current picture motion.
+Return  Move to beginning of next line.
+You can edit tabular text with these commands:
+M-Tab	  Move to column beneath (or at) next interesting character.
+	    `Indents' relative to a previous line.
+Tab	  Move to next stop in tab stop list.
+C-c Tab Set tab stops according to context of this line.
+	    With ARG resets tab stops to default (global) value.
+	    See also documentation of variable	picture-tab-chars
+	    which defines \"interesting character\".  You can manually
+	    change the tab stop list with command \\[edit-tab-stops].
+You can manipulate text with these commands:
+C-d	  Clear (replace) ARG columns after point without moving.
+C-c C-d Delete char at point - the command normally assigned to C-d.
+\\[picture-backward-clear-column]  Clear (replace) ARG columns before point, moving back over them.
+\\[picture-clear-line]	  Clear ARG lines, advancing over them.	 The cleared
+	    text is saved in the kill ring.
+\\[picture-open-line]	  Open blank line(s) beneath current line.
+You can manipulate rectangles with these commands:
+C-c C-k Clear (or kill) a rectangle and save it.
+C-c C-w Like C-c C-k except rectangle is saved in named register.
+C-c C-y Overlay (or insert) currently saved rectangle at point.
+C-c C-x Like C-c C-y except rectangle is taken from named register.
+\\[copy-rectangle-to-register]   Copies a rectangle to a register.
+\\[advertised-undo]   Can undo effects of rectangle overlay commands
+	    commands if invoked soon enough.
+You can return to the previous mode with:
+C-c C-c Which also strips trailing whitespace from every line.
+	    Stripping is suppressed by supplying an argument.
+Entry to this mode calls the value of  picture-mode-hook  if non-nil.
+Note that Picture mode commands will work outside of Picture mode, but
+they are not defaultly assigned to keys." t nil)
+(defalias 'edit-picture 'picture-mode)
+;;;***
+;;;### (autoloads (postscript-mode) "postscript" "modes/postscript.el")
+(autoload 'postscript-mode "postscript" "\
+Major mode for editing PostScript files.
+\\[ps-execute-buffer] will send the contents of the buffer to the NeWS
+server using psh(1).  \\[ps-execute-region] sends the current region.
+\\[ps-shell] starts an interactive psh(1) window which will be used for
+subsequent \\[ps-execute-buffer] or \\[ps-execute-region] commands.
+In this mode, TAB and \\[indent-region] attempt to indent code
+based on the position of {}, [], and begin/end pairs.  The variable
+ps-indent-level controls the amount of indentation used inside
+arrays and begin/end pairs.
+\\{ps-mode-map}
+\\[postscript-mode] calls the value of the variable postscript-mode-hook
+with no args, if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (run-prolog inferior-prolog-mode prolog-mode) "prolog" "modes/prolog.el")
+(autoload 'prolog-mode "prolog" "\
+Major mode for editing Prolog code for Prologs.
+Blank lines and `%%...' separate paragraphs.  `%'s start comments.
+Commands:
+\\{prolog-mode-map}
+Entry to this mode calls the value of `prolog-mode-hook'
+if that value is non-nil." t nil)
+(autoload 'inferior-prolog-mode "prolog" "\
+Major mode for interacting with an inferior Prolog process.
+The following commands are available:
+\\{inferior-prolog-mode-map}
+Entry to this mode calls the value of `prolog-mode-hook' with no arguments,
+if that value is non-nil.  Likewise with the value of `comint-mode-hook'.
+`prolog-mode-hook' is called after `comint-mode-hook'.
+You can send text to the inferior Prolog from other buffers
+using the commands `send-region', `send-string' and \\[prolog-consult-region].
+Commands:
+Tab indents for Prolog; with argument, shifts rest
+of expression rigidly with the current line.
+Paragraphs are separated only by blank lines and '%%'.
+'%'s start comments.
+Return at end of buffer sends line as input.
+Return not at end copies rest of line to end and sends it.
+\\[comint-kill-input] and \\[backward-kill-word] are kill commands, imitating normal Unix input editing.
+\\[comint-interrupt-subjob] interrupts the shell or its current subjob if any.
+\\[comint-stop-subjob] stops. \\[comint-quit-subjob] sends quit signal." t nil)
+(autoload 'run-prolog "prolog" "\
+Run an inferior Prolog process, input and output via buffer *prolog*." t nil)
+;;;***
+;;;### (autoloads (py-shell python-mode) "python-mode" "modes/python-mode.el")
+(eval-when-compile (condition-case nil (progn (require 'cl) (require 'imenu)) (error nil)))
+(autoload 'python-mode "python-mode" "\
+Major mode for editing Python files.
+To submit a problem report, enter `\\[py-submit-bug-report]' from a
+`python-mode' buffer.  Do `\\[py-describe-mode]' for detailed
+documentation.  To see what version of `python-mode' you are running,
+enter `\\[py-version]'.
+This mode knows about Python indentation, tokens, comments and
+continuation lines.  Paragraphs are separated by blank lines only.
+COMMANDS
+\\{py-mode-map}
+VARIABLES
+py-indent-offset		indentation increment
+py-block-comment-prefix		comment string used by comment-region
+py-python-command		shell command to invoke Python interpreter
+py-scroll-process-buffer		always scroll Python process buffer
+py-temp-directory		directory used for temp files (if needed)
+py-beep-if-tab-change		ring the bell if tab-width is changed" t nil)
+(autoload 'py-shell "python-mode" "\
+Start an interactive Python interpreter in another window.
+This is like Shell mode, except that Python is running in the window
+instead of a shell.  See the `Interactive Shell' and `Shell Mode'
+sections of the Emacs manual for details, especially for the key
+bindings active in the `*Python*' buffer.
+See the docs for variable `py-scroll-buffer' for info on scrolling
+behavior in the process window.
+Warning: Don't use an interactive Python if you change sys.ps1 or
+sys.ps2 from their default values, or if you're running code that
+prints `>>> ' or `... ' at the start of a line.  `python-mode' can't
+distinguish your output from Python's output, and assumes that `>>> '
+at the start of a line is a prompt from Python.  Similarly, the Emacs
+Shell mode code assumes that both `>>> ' and `... ' at the start of a
+line are Python prompts.  Bad things can happen if you fool either
+mode.
+Warning:  If you do any editing *in* the process buffer *while* the
+buffer is accepting output from Python, do NOT attempt to `undo' the
+changes.  Some of the output (nowhere near the parts you changed!) may
+be lost if you do.  This appears to be an Emacs bug, an unfortunate
+interaction between undo and process filters; the same problem exists in
+non-Python process buffers using the default (Emacs-supplied) process
+filter." t nil)
+;;;***
+;;;### (autoloads (reftex-add-to-label-alist reftex-mode turn-on-reftex) "reftex" "modes/reftex.el")
+(autoload 'turn-on-reftex "reftex" "\
+Turn on RefTeX minor mode." nil nil)
+(autoload 'reftex-mode "reftex" "\
+Minor mode with distinct support for \\label, \\ref and \\cite in LaTeX.
+Labels can be created with `\\[reftex-label]' and referenced with `\\[reftex-reference]'.
+When referencing, you get a menu with all labels of a given type and
+context of the label definition. The selected label is inserted as a
+\\ref macro.
+Citations can be made with `\\[reftex-citation]' which will use a regular expression
+to pull out a *formatted* list of articles from your BibTeX
+database. The selected citation is inserted as a \\cite macro.
+A Table of Contents of the entire (multifile) document with browsing
+capabilities is available with `\\[reftex-toc]'.
+Most command have help available on the fly. This help is accessed by
+pressing `?' to any prompt mentioning this feature.
+\\{reftex-mode-map}
+Under X, these functions will be available also in a menu on the menu bar.
+------------------------------------------------------------------------------" t nil)
+(autoload 'reftex-add-to-label-alist "reftex" "\
+Add label environment descriptions to reftex-label-alist-external-add-ons.
+The format of ENTRY-LIST is exactly like reftex-label-alist. See there
+for details.
+This function makes it possible to support RefTeX from AUCTeX style files.
+The entries in ENTRY-LIST will be processed after the user settings in
+reftex-label-alist, and before the defaults (specified in
+reftex-default-label-alist-entries).  Any changes made to
+reftex-label-alist-external-add-ons will raise a flag to the effect that a
+mode reset is done on the next occasion." nil nil)
+;;;***
+;;;### (autoloads (rexx-mode) "rexx-mode" "modes/rexx-mode.el")
+(autoload 'rexx-mode "rexx-mode" "\
+Major mode for editing REXX code.
+\\{rexx-mode-map}
+Variables controlling indentation style:
+rexx-indent
+	The basic indentation for do-blocks.
+rexx-end-indent
+	The relative offset of the \"end\" statement. 0 places it in the
+	same column as the statements of the block. Setting it to the same
+	value as rexx-indent places the \"end\" under the do-line.
+rexx-cont-indent
+	The indention for lines following \"then\", \"else\" and \",\"
+	(continued) lines.
+rexx-tab-always-indent
+	Non-nil means TAB in REXX mode should always reindent the current
+	line, regardless of where in the line the point is when the TAB
+	command is used.
+If you have set rexx-end-indent to a nonzero value, you probably want to
+remap RETURN to rexx-indent-newline-indent. It makes sure that lines
+indents correctly when you press RETURN.
+An extensive abbreviation table consisting of all the keywords of REXX are
+supplied. Expanded keywords are converted into upper case making it
+easier to distinguish them. To use this feature the buffer must be in
+abbrev-mode. (See example below.)
+Turning on REXX mode calls the value of the variable rexx-mode-hook with
+no args, if that value is non-nil.
+For example:
+\(setq rexx-mode-hook '(lambda ()
+			(setq rexx-indent 4)
+			(setq rexx-end-indent 4)
+			(setq rexx-cont-indent 4)
+			(local-set-key \"\\C-m\" 'rexx-indent-newline-indent)
+			(abbrev-mode 1)
+			))
+will make the END aligned with the DO/SELECT. It will indent blocks and
+IF-statements four steps and make sure that the END jumps into the
+correct position when RETURN is pressed. Finally it will use the abbrev
+table to convert all REXX keywords into upper case." t nil)
+;;;***
+;;;### (autoloads (resize-minibuffer-mode) "rsz-minibuf" "modes/rsz-minibuf.el")
+(defgroup resize-minibuffer nil "Dynamically resize minibuffer to display entire contents" :group 'frames)
+(defcustom resize-minibuffer-window-max-height nil "*Maximum size the minibuffer window is allowed to become.\nIf less than 1 or not a number, the limit is the height of the frame in\nwhich the active minibuffer window resides." :type '(choice (const nil) integer) :group 'resize-minibuffer)
+(defcustom resize-minibuffer-window-exactly t "*If non-`nil', make minibuffer exactly the size needed to display all its contents.\nOtherwise, the minibuffer window can temporarily increase in size but\nnever get smaller while it is active." :type 'boolean :group 'resize-minibuffer)
+(defcustom resize-minibuffer-frame nil "*If non-`nil' and the active minibuffer is the sole window in its frame, allow changing the frame height." :type 'boolean :group 'resize-minibuffer)
+(defcustom resize-minibuffer-frame-max-height nil "*Maximum size the minibuffer frame is allowed to become.\nIf less than 1 or not a number, there is no limit.")
+(defcustom resize-minibuffer-frame-exactly nil "*If non-`nil', make minibuffer frame exactly the size needed to display all its contents.\nOtherwise, the minibuffer frame can temporarily increase in size but\nnever get smaller while it is active." :type 'boolean :group 'resize-minibuffer)
+(autoload 'resize-minibuffer-mode "rsz-minibuf" "\
+Enable or disable resize-minibuffer mode.
+A negative prefix argument disables this mode.  A positive argument or
+argument of 0 enables it.
+When this minor mode is enabled, the minibuffer is dynamically resized to
+contain the entire region of text put in it as you type.
+The variable `resize-minibuffer-mode' is set to t or nil depending on
+whether this mode is active or not.
+The maximum height to which the minibuffer can grow is controlled by the
+variable `resize-minibuffer-window-max-height'.
+The variable `resize-minibuffer-window-exactly' determines whether the
+minibuffer window should ever be shrunk to make it no larger than needed to
+display its contents.
+When using a window system, it is possible for a minibuffer to be the sole
+window in a frame.  Since that window is already its maximum size, the only
+way to make more text visible at once is to increase the size of the frame.
+The variable `resize-minibuffer-frame' controls whether this should be
+done.  The variables `resize-minibuffer-frame-max-height' and
+`resize-minibuffer-frame-exactly' are analogous to their window
+counterparts." t nil)
+;;;***
+;;;### (autoloads (scheme-mode) "scheme" "modes/scheme.el")
+(autoload 'scheme-mode "scheme" "\
+Major mode for editing Scheme code.
+Editing commands are similar to those of lisp-mode.
+In addition, if an inferior Scheme process is running, some additional
+commands will be defined, for evaluating expressions and controlling
+the interpreter, and the state of the process will be displayed in the
+modeline of all Scheme buffers.  The names of commands that interact
+with the Scheme process start with \"xscheme-\".  For more information
+see the documentation for xscheme-interaction-mode.
+Commands:
+Delete converts tabs to spaces as it moves back.
+Blank lines separate paragraphs.  Semicolons start comments.
+\\{scheme-mode-map}
+Entry to this mode calls the value of scheme-mode-hook
+if that value is non-nil." t nil)
+;;;***
+;;;### (autoloads (scribe-mode) "scribe" "modes/scribe.el")
+(autoload 'scribe-mode "scribe" "\
+Major mode for editing files of Scribe (a text formatter) source.
+Scribe-mode is similar text-mode, with a few extra commands added.
+\\{scribe-mode-map}
+Interesting variables:
+scribe-fancy-paragraphs
+Non-nil makes Scribe mode use a different style of paragraph separation.
+scribe-electric-quote
+Non-nil makes insert of double quote use `` or '' depending on context.
+scribe-electric-parenthesis
+Non-nil makes an open-parenthesis char (one of `([<{')
+automatically insert its close if typed after an @Command form." t nil)
+;;;***
+;;;### (autoloads (mail-other-frame mail-other-window mail mail-mode user-mail-address) "sendmail" "modes/sendmail.el")
+(defvar mail-from-style 'angles "\
+*Specifies how \"From:\" fields look.
+If `nil', they contain just the return address like:
+	king@grassland.com
+If `parens', they look like:
+	king@grassland.com (Elvis Parsley)
+If `angles', they look like:
+	Elvis Parsley <king@grassland.com>")
+(defvar mail-self-blind nil "\
+Non-nil means insert BCC to self in messages to be sent.
+This is done when the message is initialized,
+so you can remove or alter the BCC field to override the default.")
+(defvar mail-interactive nil "\
+Non-nil means when sending a message wait for and display errors.
+nil means let mailer mail back a message to report errors.")
+(defvar mail-dir nil "\
+*Default directory for saving messages.")
+(defvar rmail-ignored-headers (purecopy (concat "^\\(" (mapconcat 'identity '("Sender:" "References:" "Return-Path:" "Received:" "[^: 	\n]*Message-ID:" "Errors-To:" "Path:" "Expires:" "Xref:" "Lines:" "Approved:" "Distribution:" "Content-Length:" "Mime-Version:" "Content-Type:" "Content-Transfer-Encoding:" "X400-Received:" "X400-Originator:" "X400-Mts-Identifier:" "X400-Content-Type:" "Content-Identifier:" "Status:" "Summary-Line:" "X-Attribution:" "Via:" "Sent-Via:" "Mail-From:" "Origin:" "Comments:" "Originator:" "NF-ID:" "NF-From:" "Posting-Version:" "Posted:" "Posted-Date:" "Date-Received:" "Relay-Version:" "Article-I\\.D\\.:" "NNTP-Version:" "NNTP-Posting-Host:" "X-Mailer:" "X-Newsreader:" "News-Software:" "X-Received:" "X-References:" "X-Envelope-To:" "X-VMS-" "Remailed-" "X-Plantation:" "X-Windows:" "X-Pgp-") "\\|") "\\)")) "\
+*Gubbish header fields one would rather not see.")
+(defvar mail-yank-ignored-headers (purecopy (concat rmail-ignored-headers "\\|" "^\\(" (mapconcat 'identity '("Resent-To:" "Resent-By:" "Resent-CC:" "To:" "Subject:" "In-Reply-To:") "\\|") "\\)")) "\
+Delete these headers from old message when it's inserted in a reply.")
+(defvar send-mail-function 'sendmail-send-it "\
+Function to call to send the current buffer as mail.
+The headers should be delimited by a line whose contents
+match the variable `mail-header-separator'.")
+(defvar mail-header-separator (purecopy "--text follows this line--") "\
+*Line used to separate headers from text in messages being composed.")
+(defvar mail-archive-file-name nil "\
+*Name of file to write all outgoing messages in, or nil for none.
+This can be an inbox file or an Rmail file.")
+(defvar mail-default-reply-to nil "\
+*Address to insert as default Reply-to field of outgoing messages.
+If nil, it will be initialized from the REPLYTO environment variable
+when you first send mail.")
+(defvar mail-alias-file nil "\
+*If non-nil, the name of a file to use instead of `/usr/lib/aliases'.
+This file defines aliases to be expanded by the mailer; this is a different
+feature from that of defining aliases in `.mailrc' to be expanded in Emacs.
+This variable has no effect unless your system uses sendmail as its mailer.")
+(defvar mail-yank-prefix "> " "\
+*Prefix insert on lines of yanked message being replied to.
+nil means use indentation.")
+(defvar mail-signature nil "\
+*Text inserted at end of mail buffer when a message is initialized.
+If t, it means to insert the contents of the file `mail-signature-file'.")
+(autoload 'user-mail-address "sendmail" "\
+Query the user for his mail address, unless it is already known." t nil)
+(autoload 'mail-mode "sendmail" "\
+Major mode for editing mail to be sent.
+Like Text Mode but with these additional commands:
+C-c C-s  mail-send (send the message)    C-c C-c  mail-send-and-exit
+C-c C-f  move to a header field (and create it if there isn't):
+	 C-c C-f C-t  move to To:	C-c C-f C-s  move to Subj:
+	 C-c C-f C-b  move to BCC:	C-c C-f C-c  move to CC:
+	 C-c C-f C-f  move to FCC:	C-c C-f C-r  move to Reply-To:
+C-c C-t  mail-text (move to beginning of message text).
+C-c C-w  mail-signature (insert `mail-signature-file' file).
+C-c C-y  mail-yank-original (insert current message, in Rmail).
+C-c C-q  mail-fill-yanked-message (fill what was yanked).
+C-c C-v  mail-sent-via (add a sent-via field for each To or CC)." t nil)
+(autoload 'mail "sendmail" "\
+Edit a message to be sent.  Prefix arg means resume editing (don't erase).
+When this function returns, the buffer `*mail*' is selected.
+The value is t if the message was newly initialized; otherwise, nil.
+Optionally, the signature file `mail-signature-file' can be inserted at the
+end; see the variable `mail-signature'.
+\\<mail-mode-map>
+While editing message, type \\[mail-send-and-exit] to send the message and exit.
+Various special commands starting with C-c are available in sendmail mode
+to move to message header fields:
+\\{mail-mode-map}
+The variable `mail-signature' controls whether the signature file
+`mail-signature-file' is inserted immediately.
+If `mail-signature' is nil, use \\[mail-signature] to insert the
+signature in `mail-signature-file'.
+If `mail-self-blind' is non-nil, a BCC to yourself is inserted
+when the message is initialized.
+If `mail-default-reply-to' is non-nil, it should be an address (a string);
+a Reply-to: field with that address is inserted.
+If `mail-archive-file-name' is non-nil, an FCC field with that file name
+is inserted.
+The normal hook `mail-setup-hook' is run after the message is
+initialized.  It can add more default fields to the message.
+When calling from a program, the first argument if non-nil says
+not to erase the existing contents of the `*mail*' buffer.
+The second through fifth arguments,
+TO, SUBJECT, IN-REPLY-TO and CC, specify if non-nil
+the initial contents of those header fields.
+These arguments should not have final newlines.
+The sixth argument REPLYBUFFER is a buffer whose contents
+should be yanked if the user types C-c C-y.
+The seventh argument ACTIONS is a list of actions to take
+if/when the message is sent.  Each action looks like (FUNCTION . ARGS);
+when the message is sent, we apply FUNCTION to ARGS.
+This is how Rmail arranges to mark messages `answered'." t nil)
+(autoload 'mail-other-window "sendmail" "\
+Like `mail' command, but display mail buffer in another window." t nil)
+(autoload 'mail-other-frame "sendmail" "\
+Like `mail' command, but display mail buffer in another frame." t nil)
+(define-key ctl-x-map "m" 'mail)
+(define-key ctl-x-4-map "m" 'mail-other-window)
+(define-key ctl-x-5-map "m" 'mail-other-frame)
+(add-hook 'same-window-buffer-names "*mail*")
+;;;***
+;;;### (autoloads (sh-mode) "sh-script" "modes/sh-script.el")
+(put 'sh-mode 'mode-class 'special)
+(autoload 'sh-mode "sh-script" "\
+Major mode for editing shell scripts.
+This mode works for many shells, since they all have roughly the same syntax,
+as far as commands, arguments, variables, pipes, comments etc. are concerned.
+Unless the file's magic number indicates the shell, your usual shell is
+assumed.  Since filenames rarely give a clue, they are not further analyzed.
+This mode adapts to the variations between shells (see `sh-set-shell') by
+means of an inheritance based feature lookup (see `sh-feature').  This
+mechanism applies to all variables (including skeletons) that pertain to
+shell-specific features.
+The default style of this mode is that of Rosenblatt's Korn shell book.
+The syntax of the statements varies with the shell being used.  The
+following commands are available, based on the current shell's syntax:
+\\[sh-case]	 case statement
+\\[sh-for]	 for loop
+\\[sh-function]	 function definition
+\\[sh-if]	 if statement
+\\[sh-indexed-loop]	 indexed loop from 1 to n
+\\[sh-while-getopts]	 while getopts loop
+\\[sh-repeat]	 repeat loop
+\\[sh-select]	 select loop
+\\[sh-until]	 until loop
+\\[sh-while]	 while loop
+\\[backward-delete-char-untabify]	 Delete backward one position, even if it was a tab.
+\\[sh-newline-and-indent]	 Delete unquoted space and indent new line same as this one.
+\\[sh-end-of-command]	 Go to end of successive commands.
+\\[sh-beginning-of-command]	 Go to beginning of successive commands.
+\\[sh-set-shell]	 Set this buffer's shell, and maybe its magic number.
+\\[sh-execute-region]	 Have optional header and region be executed in a subshell.
+\\[sh-maybe-here-document]	 Without prefix, following an unquoted < inserts here document.
+{, (, [, ', \", `
+	Unless quoted with \\, insert the pairs {}, (), [], or '', \"\", ``.
+If you generally program a shell different from your login shell you can
+set `sh-shell-file' accordingly.  If your shell's file name doesn't correctly
+indicate what shell it is use `sh-alias-alist' to translate.
+If your shell gives error messages with line numbers, you can use \\[executable-interpret]
+with your script for an edit-interpret-debug cycle." t nil)
+(defalias 'shell-script-mode 'sh-mode)
+;;;***
+;;;### (autoloads (strokes-mode strokes-list-strokes strokes-load-user-strokes strokes-help strokes-describe-stroke strokes-do-complex-stroke strokes-do-stroke strokes-read-complex-stroke strokes-read-stroke strokes-global-set-stroke) "strokes" "modes/strokes.el")
+(defvar strokes-mode nil "\
+Non-nil when `strokes' is globally enabled")
+(autoload 'strokes-global-set-stroke "strokes" "\
+Interactively give STROKE the global binding as COMMAND.
+Operated just like `global-set-key', except for strokes.
+COMMAND is a symbol naming an interactively-callable function.  STROKE
+is a list of sampled positions on the stroke grid as described in the
+documentation for the `strokes-define-stroke' function." t nil)
+(defalias 'global-set-stroke 'strokes-global-set-stroke)
+(autoload 'strokes-read-stroke "strokes" "\
+Read a simple stroke (interactively) and return the stroke.
+Optional PROMPT in minibuffer displays before and during stroke reading.
+This function will display the stroke interactively as it is being
+entered in the strokes buffer if the variable
+`strokes-use-strokes-buffer' is non-nil.
+Optional EVENT is currently not used, but hopefully will be soon." nil nil)
+(autoload 'strokes-read-complex-stroke "strokes" "\
+Read a complex stroke (interactively) and return the stroke.
+Optional PROMPT in minibuffer displays before and during stroke reading.
+Note that a complex stroke allows the user to pen-up and pen-down.  This
+is implemented by allowing the user to paint with button1 or button2 and
+then complete the stroke with button3.
+Optional EVENT is currently not used, but hopefully will be soon." nil nil)
+(autoload 'strokes-do-stroke "strokes" "\
+Read a simple stroke from the user and then exectute its comand.
+This must be bound to a mouse event." t nil)
+(autoload 'strokes-do-complex-stroke "strokes" "\
+Read a complex stroke from the user and then exectute its command.
+This must be bound to a mouse event." t nil)
+(autoload 'strokes-describe-stroke "strokes" "\
+Displays the command which STROKE maps to, reading STROKE interactively." t nil)
+(defalias 'describe-stroke 'strokes-describe-stroke)
+(autoload 'strokes-help "strokes" "\
+Get instructional help on using the the `strokes' package." t nil)
+(autoload 'strokes-load-user-strokes "strokes" "\
+Load user-defined strokes from file named by `strokes-file'." t nil)
+(defalias 'load-user-strokes 'strokes-load-user-strokes)
+(autoload 'strokes-list-strokes "strokes" "\
+Pop up a buffer containing a listing of all strokes defined in STROKE-MAP.
+If STROKE-MAP is not given, `strokes-global-map' will be used instead." t nil)
+(defalias 'list-strokes 'strokes-list-strokes)
+(autoload 'strokes-mode "strokes" "\
+Toggle strokes being enabled.
+With ARG, turn strokes on if and only if ARG is positive or true.
+Note that `strokes-mode' is a global mode.  Think of it as a minor
+mode in all buffers when activated.
+By default, strokes are invoked with mouse button-2.  You can define
+new strokes with
+> M-x global-set-stroke" t nil)
+;;;***
+;;;### (autoloads (tcl-help-on-word inferior-tcl tcl-mode) "tcl" "modes/tcl.el")
+(autoload 'tcl-mode "tcl" "\
+Major mode for editing Tcl code.
+Expression and list commands understand all Tcl brackets.
+Tab indents for Tcl code.
+Paragraphs are separated by blank lines only.
+Delete converts tabs to spaces as it moves back.
+Variables controlling indentation style:
+tcl-indent-level
+Indentation of Tcl statements within surrounding block.
+tcl-continued-indent-level
+Indentation of continuation line relative to first line of command.
+Variables controlling user interaction with mode (see variable
+documentation for details):
+tcl-tab-always-indent
+Controls action of TAB key.
+tcl-auto-newline
+Non-nil means automatically newline before and after braces, brackets,
+and semicolons inserted in Tcl code.
+tcl-electric-hash-style
+Controls action of `#' key.
+tcl-use-hairy-comment-detector
+If t, use more complicated, but slower, comment detector.
+This variable is only used in GNU Emacs 19.
+tcl-use-smart-word-finder
+If not nil, use a smarter, Tcl-specific way to find the current
+word when looking up help on a Tcl command.
+Turning on Tcl mode calls the value of the variable `tcl-mode-hook'
+with no args, if that value is non-nil.  Read the documentation for
+`tcl-mode-hook' to see what kinds of interesting hook functions
+already exist.
+Commands:
+\\{tcl-mode-map}" t nil)
+(autoload 'inferior-tcl "tcl" "\
+Run inferior Tcl process.
+Prefix arg means enter program name interactively.
+See documentation for function `inferior-tcl-mode' for more information." t nil)
+(autoload 'tcl-help-on-word "tcl" "\
+Get help on Tcl command.  Default is word at point.
+Prefix argument means invert sense of `tcl-use-smart-word-finder'." t nil)
+;;;***
+;;;### (autoloads (latex-mode plain-tex-mode tex-mode) "tex-mode" "modes/tex-mode.el")
+(autoload 'tex-mode "tex-mode" "\
+Major mode for editing files of input for TeX, LaTeX, or SliTeX.
+Tries to determine (by looking at the beginning of the file) whether
+this file is for plain TeX, LaTeX, or SliTeX and calls plain-tex-mode,
+latex-mode, or slitex-mode, respectively.  If it cannot be determined,
+such as if there are no commands in the file, the value of tex-default-mode
+is used." t nil)
+(fset 'TeX-mode 'tex-mode)
+(fset 'LaTeX-mode 'latex-mode)
+(autoload 'plain-tex-mode "tex-mode" "\
+Major mode for editing files of input for plain TeX.
+Makes $ and } display the characters they match.
+Makes \" insert `` when it seems to be the beginning of a quotation,
+and '' when it appears to be the end; it inserts \" only after a \\.
+Use \\[tex-region] to run TeX on the current region, plus a \"header\"
+copied from the top of the file (containing macro definitions, etc.),
+running TeX under a special subshell.  \\[tex-buffer] does the whole buffer.
+\\[tex-file] saves the buffer and then processes the file.
+\\[tex-print] prints the .dvi file made by any of these.
+\\[tex-view] previews the .dvi file made by any of these.
+\\[tex-bibtex-file] runs bibtex on the file of the current buffer.
+Use \\[validate-tex-buffer] to check buffer for paragraphs containing
+mismatched $'s or braces.
+Special commands:
+\\{tex-mode-map}
+Mode variables:
+tex-run-command
+	Command string used by \\[tex-region] or \\[tex-buffer].
+tex-directory
+	Directory in which to create temporary files for TeX jobs
+	run by \\[tex-region] or \\[tex-buffer].
+tex-dvi-print-command
+	Command string used by \\[tex-print] to print a .dvi file.
+tex-alt-dvi-print-command
+	Alternative command string used by \\[tex-print] (when given a prefix
+	argument) to print a .dvi file.
+tex-dvi-view-command
+	Command string used by \\[tex-view] to preview a .dvi file.
+tex-show-queue-command
+	Command string used by \\[tex-show-print-queue] to show the print
+	queue that \\[tex-print] put your job on.
+Entering Plain-tex mode calls the value of text-mode-hook, then the value of
+tex-mode-hook, and then the value of plain-tex-mode-hook.  When the special
+subshell is initiated, the value of tex-shell-hook is called." t nil)
+(fset 'plain-TeX-mode 'plain-tex-mode)
+(autoload 'latex-mode "tex-mode" "\
+Major mode for editing files of input for LaTeX.
+Makes $ and } display the characters they match.
+Makes \" insert `` when it seems to be the beginning of a quotation,
+and '' when it appears to be the end; it inserts \" only after a \\.
+Use \\[tex-region] to run LaTeX on the current region, plus the preamble
+copied from the top of the file (containing \\documentstyle, etc.),
+running LaTeX under a special subshell.  \\[tex-buffer] does the whole buffer.
+\\[tex-file] saves the buffer and then processes the file.
+\\[tex-print] prints the .dvi file made by any of these.
+\\[tex-view] previews the .dvi file made by any of these.
+\\[tex-bibtex-file] runs bibtex on the file of the current buffer.
+Use \\[validate-tex-buffer] to check buffer for paragraphs containing
+mismatched $'s or braces.
+Special commands:
+\\{tex-mode-map}
+Mode variables:
+latex-run-command
+	Command string used by \\[tex-region] or \\[tex-buffer].
+tex-directory
+	Directory in which to create temporary files for LaTeX jobs
+	run by \\[tex-region] or \\[tex-buffer].
+tex-dvi-print-command
+	Command string used by \\[tex-print] to print a .dvi file.
+tex-alt-dvi-print-command
+	Alternative command string used by \\[tex-print] (when given a prefix
+	argument) to print a .dvi file.
+tex-dvi-view-command
+	Command string used by \\[tex-view] to preview a .dvi file.
+tex-show-queue-command
+	Command string used by \\[tex-show-print-queue] to show the print
+	queue that \\[tex-print] put your job on.
+Entering Latex mode calls the value of text-mode-hook, then the value of
+tex-mode-hook, and then the value of latex-mode-hook.  When the special
+subshell is initiated, the value of tex-shell-hook is called." t nil)
+;;;***
+;;;### (autoloads (texinfo-mode) "texinfo" "modes/texinfo.el")
+(autoload 'texinfo-mode "texinfo" "\
+Major mode for editing Texinfo files.
+It has these extra commands:
+\\{texinfo-mode-map}
+These are files that are used as input for TeX to make printed manuals
+and also to be turned into Info files with \\[makeinfo-buffer] or
+the `makeinfo' program.  These files must be written in a very restricted and
+modified version of TeX input format.
+Editing commands are like text-mode except that the syntax table is
+set up so expression commands skip Texinfo bracket groups.  To see
+what the Info version of a region of the Texinfo file will look like,
+use \\[makeinfo-region], which runs `makeinfo' on the current region.
+You can show the structure of a Texinfo file with \\[texinfo-show-structure].
+This command shows the structure of a Texinfo file by listing the
+lines with the @-sign commands for @chapter, @section, and the like.
+These lines are displayed in another window called the *Occur* window.
+In that window, you can position the cursor over one of the lines and
+use \\[occur-mode-goto-occurrence], to jump to the corresponding spot
+in the Texinfo file.
+In addition, Texinfo mode provides commands that insert various
+frequently used @-sign commands into the buffer.  You can use these
+commands to save keystrokes.  And you can insert balanced braces with
+\\[texinfo-insert-braces] and later use the command \\[up-list] to
+move forward past the closing brace.
+Also, Texinfo mode provides functions for automatically creating or
+updating menus and node pointers.  These functions
+* insert the `Next', `Previous' and `Up' pointers of a node,
+* insert or update the menu for a section, and
+* create a master menu for a Texinfo source file.
+Here are the functions:
+texinfo-update-node                \\[texinfo-update-node]
+texinfo-every-node-update          \\[texinfo-every-node-update]
+texinfo-sequential-node-update
+texinfo-make-menu                  \\[texinfo-make-menu]
+texinfo-all-menus-update           \\[texinfo-all-menus-update]
+texinfo-master-menu
+texinfo-indent-menu-description (column &optional region-p)
+The `texinfo-column-for-description' variable specifies the column to
+which menu descriptions are indented.
+Passed an argument (a prefix argument, if interactive), the
+`texinfo-update-node' and `texinfo-make-menu' functions do their jobs
+in the region.
+To use the updating commands, you must structure your Texinfo file
+hierarchically, such that each `@node' line, with the exception of the
+Top node, is accompanied by some kind of section line, such as an
+`@chapter' or `@section' line.
+If the file has a `top' node, it must be called `top' or `Top' and
+be the first node in the file.
+Entering Texinfo mode calls the value of text-mode-hook, and then the
+value of texinfo-mode-hook." t nil)
+;;;***
+;;;### (autoloads (verilog-mode) "verilog-mode" "modes/verilog-mode.el")
+(autoload 'verilog-mode "verilog-mode" "\
+Major mode for editing Verilog code. \\<verilog-mode-map>
+NEWLINE, TAB indents for Verilog code.
+Delete converts tabs to spaces as it moves back.
+Supports highlighting.
+Variables controlling indentation/edit style:
+verilog-indent-level           (default 3)
+Indentation of Verilog statements with respect to containing block.
+verilog-indent-level-module    (default 3)
+Absolute indentation of Module level Verilog statements.
+Set to 0 to get initial and always statements lined up
+on the left side of your screen.
+verilog-indent-level-declaration    (default 3)
+Indentation of declarations with respect to containing block.
+Set to 0 to get them list right under containing block.
+verilog-indent-level-behavorial    (default 3)
+Indentation of first begin in a task or function block
+Set to 0 to get such code to linedup underneath the task or function keyword
+verilog-cexp-indent            (default 1)
+Indentation of Verilog statements broken across lines.
+verilog-case-indent            (default 2)
+Indentation for case statements.
+verilog-auto-newline           (default nil)
+Non-nil means automatically newline after semicolons and the punctation
+mark after an end.
+verilog-auto-indent-on-newline (default t)
+Non-nil means automatically indent line after newline
+verilog-tab-always-indent      (default t)
+Non-nil means TAB in Verilog mode should always reindent the current line,
+regardless of where in the line point is when the TAB command is used.
+verilog-indent-begin-after-if  (default t)
+Non-nil means to indent begin statements following a preceding
+if, else, while, for and repeat statements, if any. otherwise,
+the begin is lined up with the preceding token. If t, you get:
+if (a)
+begin
+otherwise you get:
+if (a)
+begin
+verilog-auto-endcomments       (default t)
+Non-nil means a comment /* ... */ is set after the ends which ends
+cases, tasks, functions and modules.
+The type and name of the object will be set between the braces.
+verilog-minimum-comment-distance (default 40)
+Minimum distance between begin and end required before a comment
+will be inserted.  Setting this variable to zero results in every
+end aquiring a comment; the default avoids too many redundanet
+comments in tight quarters.
+verilog-auto-lineup            (default `(all))
+List of contexts where auto lineup of :'s or ='s should be done.
+Turning on Verilog mode calls the value of the variable verilog-mode-hook with
+no args, if that value is non-nil.
+Other useful functions are:
+\\[verilog-complete-word]	-complete word with appropriate possibilities
+(functions, verilog keywords...)
+\\[verilog-comment-region]	- Put marked area in a comment, fixing
+nested comments.
+\\[verilog-uncomment-region]	- Uncomment an area commented with \\[verilog-comment-region].
+\\[verilog-insert-block]	- insert begin ... end;
+\\[verilog-star-comment]	- insert /* ... */
+\\[verilog-mark-defun]	- Mark function.
+\\[verilog-beg-of-defun]	- Move to beginning of current function.
+\\[verilog-end-of-defun]	- Move to end of current function.
+\\[verilog-label-be]	- Label matching begin ... end, fork ... join
+and case ... endcase statements;
+" t nil)
+;;;***
+;;;### (autoloads (vhdl-mode) "vhdl-mode" "modes/vhdl-mode.el")
+(autoload 'vhdl-mode "vhdl-mode" "\
+Major mode for editing VHDL code.
+vhdl-mode $Revision: 1.1 $
+To submit a problem report, enter `\\[vhdl-submit-bug-report]' from a
+vhdl-mode buffer.  This automatically sets up a mail buffer with version
+information already added.  You just need to add a description of the
+problem, including a reproducible test case and send the message.
+Note that the details of configuring vhdl-mode will soon be moved to the
+accompanying texinfo manual.  Until then, please read the README file
+that came with the vhdl-mode distribution.
+The hook variable `vhdl-mode-hook' is run with no args, if that value is
+bound and has a non-nil value.
+Key bindings:
+\\{vhdl-mode-map}" t nil)
+;;;***
+;;;### (autoloads (auto-view-mode view-major-mode view-mode view-minor-mode view-buffer-other-window view-file-other-window view-buffer view-file) "view-less" "modes/view-less.el")
+(defvar view-minor-mode-map (let ((map (make-keymap))) (set-keymap-name map 'view-minor-mode-map) (suppress-keymap map) (define-key map "-" 'negative-argument) (define-key map " " 'scroll-up) (define-key map "f" 'scroll-up) (define-key map "b" 'scroll-down) (define-key map 'backspace 'scroll-down) (define-key map 'delete 'scroll-down) (define-key map "
+" 'view-scroll-lines-up) (define-key map "\n" 'view-scroll-lines-up) (define-key map "e" 'view-scroll-lines-up) (define-key map "j" 'view-scroll-lines-up) (define-key map "y" 'view-scroll-lines-down) (define-key map "k" 'view-scroll-lines-down) (define-key map "d" 'view-scroll-some-lines-up) (define-key map "u" 'view-scroll-some-lines-down) (define-key map "r" 'recenter) (define-key map "t" 'toggle-truncate-lines) (define-key map "N" 'view-buffer) (define-key map "E" 'view-file) (define-key map "P" 'view-buffer) (define-key map "!" 'shell-command) (define-key map "|" 'shell-command-on-region) (define-key map "=" 'what-line) (define-key map "?" 'view-search-backward) (define-key map "h" 'view-mode-describe) (define-key map "s" 'view-repeat-search) (define-key map "n" 'view-repeat-search) (define-key map "/" 'view-search-forward) (define-key map "\\" 'view-search-backward) (define-key map "g" 'view-goto-line) (define-key map "G" 'view-last-windowful) (define-key map "%" 'view-goto-percent) (define-key map "p" 'view-goto-percent) (define-key map "m" 'point-to-register) (define-key map "'" 'register-to-point) (define-key map "C" 'view-cleanup-backspaces) (define-key map "" 'view-quit) (define-key map "" 'view-quit-toggle-ro) (define-key map "q" 'view-quit) map))
+(defvar view-mode-map (let ((map (copy-keymap view-minor-mode-map))) (set-keymap-name map 'view-mode-map) map))
+(autoload 'view-file "view-less" "\
+Find FILE, enter view mode.  With prefix arg OTHER-P, use other window." t nil)
+(autoload 'view-buffer "view-less" "\
+Switch to BUF, enter view mode.  With prefix arg use other window." t nil)
+(autoload 'view-file-other-window "view-less" "\
+Find FILE in other window, and enter view mode." t nil)
+(autoload 'view-buffer-other-window "view-less" "\
+Switch to BUFFER in another window, and enter view mode." t nil)
+(autoload 'view-minor-mode "view-less" "\
+Minor mode for viewing text, with bindings like `less'.
+Commands are:
+\\<view-minor-mode-map>
+0..9	prefix args
+-	prefix minus
+\\[scroll-up]	page forward
+\\[scroll-down]	page back
+\\[view-scroll-lines-up]	scroll prefix-arg lines forward, default 1.
+\\[view-scroll-lines-down]	scroll prefix-arg lines backward, default 1.
+\\[view-scroll-some-lines-down]	scroll prefix-arg lines backward, default 10.
+\\[view-scroll-some-lines-up]	scroll prefix-arg lines forward, default 10.
+\\[what-line]	print line number
+\\[view-mode-describe]	print this help message
+\\[view-search-forward]	regexp search, uses previous string if you just hit RET
+\\[view-search-backward]	as above but searches backward
+\\[view-repeat-search]	repeat last search
+\\[view-goto-line]	goto line prefix-arg, default 1
+\\[view-last-windowful]	goto line prefix-arg, default last line
+\\[view-goto-percent]	goto a position by percentage
+\\[toggle-truncate-lines]	toggle truncate-lines
+\\[view-file]	view another file
+\\[view-buffer]	view another buffer
+\\[view-cleanup-backspaces]	cleanup backspace constructions
+\\[shell-command]	execute a shell command
+\\[shell-command-on-region]	execute a shell command with the region as input
+\\[view-quit]	exit view-mode, and bury the current buffer.
+If invoked with the optional (prefix) arg non-nil, view-mode cleans up
+backspace constructions.
+More precisely:
+\\{view-minor-mode-map}" t nil)
+(autoload 'view-mode "view-less" "\
+View the current buffer using view-minor-mode.  This exists to be 99.9%
+compatible with the implementations of `view-mode' in view.el and older
+versions of view-less.el." t nil)
+(autoload 'view-major-mode "view-less" "\
+View the current buffer using view-mode, as a major mode.
+This function has a nonstandard name because `view-mode' is wrongly
+named but is like this for compatibility reasons." t nil)
+(autoload 'auto-view-mode "view-less" "\
+If the file of the current buffer is not writable, call view-mode.
+This is meant to be added to `find-file-hooks'." nil nil)
+;;;***
+;;;### (autoloads (vrml-mode) "vrml-mode" "modes/vrml-mode.el")
+(autoload 'vrml-mode "vrml-mode" "\
+Major mode for editing VRML code.
+Expression and list commands understand all VRML brackets.
+Tab indents for VRML code.
+Paragraphs are separated by blank lines only.
+Delete converts tabs to spaces as it moves back.
+Variables controlling indentation style:
+vrml-indent-level
+Indentation of VRML statements within surrounding block.
+Variables controlling user interaction with mode (see variable
+documentation for details):
+vrml-tab-always-indent
+Controls action of TAB key.
+vrml-auto-newline
+Non-nil means automatically newline before and after braces
+inserted in VRML code.
+Turning on VRML mode calls the value of the variable `vrml-mode-hook'
+with no args, if that value is non-nil.  Read the documentation for
+`vrml-mode-hook' to see what kinds of interesting hook functions
+already exist.
+Commands:
+\\{vrml-mode-map}" t nil)
+;;;***
+;;;### (autoloads (xpm-mode) "xpm-mode" "modes/xpm-mode.el")
+(autoload 'xpm-mode "xpm-mode" "\
+Treat the current buffer as an xpm file and colorize it.
+Shift-button-1 lets you paint by dragging the mouse.  Shift-button-1 on a
+color definition line will change the current painting color to that line's
+value.
+Characters inserted from the keyboard will NOT be colored properly yet.
+Use the mouse, or do xpm-init (\\[xpm-init]) after making changes.
+\\[xpm-add-color] Add a new color, prompting for character and value
+\\[xpm-show-image] show the current image at the top of the buffer
+\\[xpm-parse-color] parse the current line's color definition and add
+it to the color table.  Provided as a means of changing colors.
+XPM minor mode bindings:
+\\{xpm-mode-map}" t nil)
+;;;***
+;;;### (autoloads (xrdb-mode) "xrdb-mode" "modes/xrdb-mode.el")
+(autoload 'xrdb-mode "xrdb-mode" "\
+Major mode for editing xrdb config files" t nil)
+;;;***
+(provide 'modes-autoloads)
+))

Mercurial > hg > xemacs-beta

comparison lisp/modes/auto-autoloads.el @ 163:0132846995bd r20-3b8