Mercurial > hg > xemacs-beta
annotate Makefile.in.in @ 4439:f4eb31866c38
Fix reader crash.
2008-03-15 Michael Sperber <mike@xemacs.org>
* lread.c (read1): Signal an error on ?\<newline>, thus preventing
an assertion failure higher up.
| author | Mike Sperber <sperber@deinprogramm.de> |
|---|---|
| date | Sat, 15 Mar 2008 12:21:11 +0100 |
| parents | eb82fbb675ea |
| children | ac6231e0c1df |
| rev | line source |
|---|---|
| 4197 | 1 ## Copyright (C) 2003, 2005 Ben Wing. |
| 1314 | 2 |
| 380 | 3 ## DIST: This is the distribution Makefile for XEmacs. configure can |
| 4 ## DIST: make most of the changes to this file you might want, so try | |
| 5 ## DIST: that first. | |
| 6 | |
| 7 ## This file is part of XEmacs. | |
| 8 | |
| 9 ## XEmacs is free software; you can redistribute it and/or modify it | |
| 10 ## under the terms of the GNU General Public License as published by the | |
| 11 ## Free Software Foundation; either version 2, or (at your option) any | |
| 12 ## later version. | |
| 13 | |
| 14 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT | |
| 15 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 16 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| 17 ## for more details. | |
| 18 | |
| 19 ## You should have received a copy of the GNU General Public License | |
| 20 ## along with XEmacs; see the file COPYING. If not, write to | |
| 21 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
| 22 ## Boston, MA 02111-1307, USA. | |
| 23 | |
| 24 ## make all to compile and build XEmacs. | |
| 25 ## make install to build and install it. | |
| 26 ## make install-only to install after a previous complete build | |
| 27 ## make TAGS to update tags tables. | |
| 28 | |
| 29 ## make clean or make mostlyclean | |
| 30 ## Delete all files from the current directory that are normally | |
| 31 ## created by building the program. Don't delete the files that | |
| 32 ## record the configuration. Also preserve files that could be made | |
| 33 ## by building, but normally aren't because the distribution comes | |
| 34 ## with them. | |
| 35 | |
| 36 ## Delete `.dvi' files here if they are not part of the distribution. | |
| 37 | |
| 38 ## make distclean | |
| 39 ## Delete all files from the current directory that are created by | |
| 40 ## configuring or building the program. If you have unpacked the | |
| 41 ## source and built the program without creating any other files, | |
| 42 ## `make distclean' should leave only the files that were in the | |
| 43 ## distribution. | |
| 44 | |
| 45 ## make realclean | |
| 46 ## Delete everything from the current directory that can be | |
| 47 ## reconstructed with this Makefile. This typically includes | |
| 48 ## everything deleted by distclean, plus more: C source files | |
| 49 ## produced by Bison, tags tables, info files, and so on. | |
| 50 | |
| 51 ## make extraclean | |
| 52 ## Still more severe - delete backup and autosave files, too. | |
| 53 | |
| 424 | 54 #define NOT_C_CODE |
| 55 #include "src/config.h" | |
| 56 | |
| 380 | 57 #ifdef USE_GNU_MAKE |
| 2427 | 58 RECURSIVE_MAKE_ARGS= |
| 380 | 59 #else |
| 60 @SET_MAKE@ | |
| 2427 | 61 RECURSIVE_MAKE_ARGS=@RECURSIVE_MAKE_ARGS@ |
| 380 | 62 #endif |
| 63 | |
| 64 SHELL = /bin/sh | |
| 65 LANG = C | |
| 396 | 66 LC_ALL = C |
| 380 | 67 RM = rm -f |
| 426 | 68 MAKEPATH=./lib-src/make-path |
| 380 | 69 pwd = /bin/pwd |
| 430 | 70 TAR = tar |
| 380 | 71 |
| 72 ## ==================== Things `configure' Might Edit ==================== | |
| 73 | |
| 74 CC=@CC@ | |
| 75 CPP=@CPP@ | |
| 76 LN_S=@LN_S@ | |
| 77 CFLAGS=@CFLAGS@ | |
| 78 CPPFLAGS=@CPPFLAGS@ | |
| 708 | 79 LDFLAGS=@LDFLAGS@ |
| 380 | 80 |
| 81 ## These help us choose version- and architecture-specific directories | |
| 82 ## to install files in. | |
| 83 | |
| 84 ## This should be the number of the XEmacs version we're building, | |
| 85 ## like `19.12' or `19.13'. | |
| 86 version=@version@ | |
| 87 | |
| 88 ## This should be the name of the configuration we're building XEmacs | |
| 89 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'. | |
| 90 configuration=@configuration@ | |
| 91 | |
| 92 ## This will be the name of the generated binary and is set automatically | |
| 93 ## by configure. | |
| 94 PROGNAME=@PROGNAME@ | |
| 95 | |
| 96 ## ==================== Where To Install Things ==================== | |
| 97 | |
| 98 ## The default location for installation. Everything is placed in | |
| 99 ## subdirectories of this directory. The default values for many of | |
| 100 ## the variables below are expressed in terms of this one, so you may | |
| 101 ## not need to change them. This defaults to /usr/local. | |
| 102 prefix=@prefix@ | |
| 103 | |
| 422 | 104 ## Variable data (as per each program update) goes here |
| 105 ## The default is ${PROGNAME} | |
| 106 inststaticdir=@inststaticdir@ | |
| 107 | |
| 108 ## Static data (constant across program updates) goes here | |
| 109 ## The default is ${PROGNAME}-${version} | |
| 110 instvardir=@instvardir@ | |
| 111 | |
| 380 | 112 ## Like `prefix', but used for architecture-specific files. |
| 113 exec_prefix=@exec_prefix@ | |
| 114 | |
| 115 ## Where to install XEmacs and other binaries that people will want to | |
| 116 ## run directly (like etags). | |
| 117 bindir=@bindir@ | |
| 118 | |
| 4118 | 119 ## Base for installing architecture-independent data files. |
| 120 ## ${infodir} and ${mandir} are subdirectories of this. | |
| 121 datarootdir=@datarootdir@ | |
| 122 | |
| 380 | 123 ## Where to install architecture-independent data files. |
| 124 ## ${lispdir} and ${etcdir} are subdirectories of this. | |
| 125 datadir=@datadir@ | |
| 126 | |
| 127 ## Where to install and expect the files that XEmacs modifies as it runs. | |
| 128 ## These files are all architecture-independent. Right now, the | |
| 129 ## only such data is the locking directory; | |
| 130 statedir=@statedir@ | |
| 131 | |
| 132 ## Where to install and expect executable files to be run by XEmacs | |
| 133 ## rather than directly by users, and other architecture-dependent data | |
| 134 ## ${archlibdir} is a subdirectory of this. | |
| 135 libdir=@libdir@ | |
| 136 | |
| 137 ## Where to install XEmacs's man pages, and what extension they should have. | |
| 138 mandir=@mandir@ | |
| 139 manext=.1 | |
| 140 | |
| 141 ## Where to install and expect the info files describing XEmacs. In the | |
| 142 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but | |
| 143 ## since there are now many packages documented with the texinfo | |
| 144 ## system, it is inappropriate to imply that it is part of XEmacs. | |
| 145 infodir=@infodir@ | |
| 146 | |
| 147 ## Document me. | |
| 148 ## See callproc.c for code which references this. | |
| 149 infopath=@infopath@ | |
| 150 | |
| 151 ## Where to find the source code. The source code for XEmacs's C kernel is | |
| 152 ## expected to be in ${srcdir}/src, and the source code for XEmacs's | |
| 153 ## utility programs is expected to be in ${srcdir}/lib-src. This is | |
| 154 ## set by the configure script's `--srcdir' option. | |
| 155 srcdir=@srcdir@ | |
| 156 | |
| 157 ## Where the build is done. | |
| 158 blddir=@blddir@ | |
| 159 | |
| 160 ## ==================== XEmacs-specific directories ==================== | |
| 161 | |
| 162 ## These variables hold the values XEmacs will actually use. They are | |
| 163 ## based on the values of the standard Make variables above. | |
| 164 | |
| 165 ## Where to install the lisp files distributed with | |
| 166 ## XEmacs. This includes the XEmacs version, so that the | |
| 167 ## lisp files for different versions of XEmacs will install | |
| 168 ## themselves in separate directories. | |
| 169 lispdir=@lispdir@ | |
| 170 | |
| 388 | 171 ## Where to install the module files distributed with |
| 172 ## XEmacs. This includes the XEmacs version, so that the | |
| 173 ## module files for different versions of XEmacs will install | |
| 174 ## themselves in separate directories. | |
| 175 moduledir=@moduledir@ | |
| 176 | |
| 380 | 177 ## Directory XEmacs should search for lisp files specific |
| 178 ## to this site (i.e. customizations), before consulting | |
| 179 ## ${lispdir}. | |
| 180 sitelispdir=@sitelispdir@ | |
| 181 | |
| 388 | 182 ## Directory XEmacs should search for module files specific |
| 183 ## to this site (i.e. customizations), before consulting | |
| 184 ## ${moduledir}. | |
| 185 sitemoduledir=@sitemoduledir@ | |
| 186 | |
| 380 | 187 ## Where XEmacs will search for its lisp files while |
| 188 ## building. This is only used during the process of | |
| 189 ## compiling XEmacs, to help XEmacs find its lisp files | |
| 190 ## before they've been installed in their final location. | |
| 191 ## It's usually identical to lispdir, except that the | |
| 192 ## entry for the directory containing the installed lisp | |
| 193 ## files has been replaced with ../lisp. This should be a | |
| 194 ## colon-separated list of directories. | |
| 195 buildlispdir=${srcdir}/lisp | |
| 196 | |
| 197 ## Where to install the other architecture-independent | |
| 198 ## data files distributed with XEmacs (like the tutorial, | |
| 199 ## the cookie recipes and the Zippy database). This path | |
| 200 ## usually contains the XEmacs version number, so the data | |
| 201 ## files for multiple versions of XEmacs may be installed | |
| 202 ## at once. | |
| 203 etcdir=@etcdir@ | |
| 204 | |
| 424 | 205 ## Where to put the DOC file. |
| 420 | 206 docdir=@docdir@ |
| 207 | |
| 380 | 208 ## Where to put executables to be run by XEmacs rather than |
| 209 ## the user. This path usually includes the XEmacs version | |
| 210 ## and configuration name, so that multiple configurations | |
| 211 ## for multiple versions of XEmacs may be installed at | |
| 212 ## once. | |
| 213 archlibdir=@archlibdir@ | |
| 214 | |
| 215 ## ==================== Utility Programs for the Build ==================== | |
| 216 | |
| 217 ## Allow the user to specify the install program. | |
| 218 INSTALL = @install_pp@ @INSTALL@ | |
| 219 INSTALL_PROGRAM = @INSTALL_PROGRAM@ | |
| 220 INSTALL_DATA = @INSTALL_DATA@ | |
| 221 | |
| 222 ## ============================= Targets ============================== | |
| 223 | |
| 3062 | 224 ## Subdirectories to make recursively. `lisp' is not included currently; |
| 225 ## rebuilding the compiled lisp files is done in the `src' make and requires | |
| 226 ## building XEmacs first. | |
| 380 | 227 MAKE_SUBDIR = @MAKE_SUBDIR@ |
| 228 | |
| 229 ## Subdirectories that can be made recursively. | |
| 424 | 230 SUBDIR = ${MAKE_SUBDIR} man |
| 231 | |
| 380 | 232 ## The makefiles of the directories in ${MAKE_SUBDIR}. |
| 233 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@ | |
| 234 | |
| 235 ## Subdirectories to `make install-arch-dep' recursively | |
| 236 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@ | |
| 237 | |
| 238 ## Subdirectories to install, and where they'll go. | |
| 239 ## lib-src's makefile knows how to install it, so we don't do that here. | |
| 240 ## When installing the info files, we need to do special things to | |
| 241 ## avoid nuking an existing dir file, so we don't do that here; | |
| 242 ## instead, we have written out explicit code in the `install' targets. | |
| 243 COPYDIR = ${srcdir}/etc ${srcdir}/lisp | |
| 244 COPYDESTS = ${etcdir} ${lispdir} | |
| 3074 | 245 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/config.h lwlib/config.h src/sheap-adjust.h src/xemacs.def etc/PROBLEMS |
| 380 | 246 |
| 1314 | 247 ## MAKE_SUBDIR will always be of the form lib-src ... src, where |
| 248 ## `...' includes various other directories that may be inserted by | |
| 249 ## configure. | |
| 250 all: Makefile ${GENERATED_HEADERS} ${MAKE_SUBDIR} info | |
| 380 | 251 |
| 252 ## For performance and consistency, no built-in rules | |
| 253 .SUFFIXES: | |
| 254 | |
| 1314 | 255 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} |
| 256 .PHONY: ${SUBDIR} all beta | |
| 380 | 257 |
| 258 ## Convenience target for XEmacs beta testers | |
|
4419
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
259 beta: elcclean update-version all |
| 380 | 260 |
| 261 ## Convenience target for XEmacs maintainers | |
| 262 ## This would run `make-xemacsdist' if I were really confident that everything | |
| 263 ## was turnkey. | |
| 1314 | 264 dist: all |
| 380 | 265 |
| 266 ## Convenience target for XEmacs maintainers | |
| 267 ## Updates some rarely generated files: | |
| 3752 | 268 ## - configure from configure.ac |
| 380 | 269 ## - config.values.in from configure |
| 270 ## - src/depend from src/*.[ch] | |
| 271 .PHONY: config configure depend | |
| 272 config: configure depend | |
| 426 | 273 configure: ${srcdir}/configure ${srcdir}/lib-src/config.values.in |
| 274 | |
| 3752 | 275 ${srcdir}/configure : ${srcdir}/configure.ac |
| 380 | 276 cd ${srcdir} && autoconf |
| 277 | |
| 426 | 278 ${srcdir}/lib-src/config.values.in : ${srcdir}/configure |
| 279 cd ${srcdir} && $(SHELL) lib-src/config.values.sh | |
| 280 | |
| 442 | 281 depend ${srcdir}/src/depend: |
| 2427 | 282 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) depend |
| 380 | 283 |
| 1314 | 284 check: |
| 2427 | 285 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@ |
| 380 | 286 |
| 1314 | 287 check-features: all |
| 2427 | 288 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@ |
| 380 | 289 |
| 290 ## We have to force the building of Emacs.ad.h as well in order to get it | |
| 291 ## updated correctly when VPATH is being used. Since we use move-if-change, | |
| 292 ## it will only actually change if the user modified ${etcdir}/Emacs.ad. | |
| 293 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad | |
| 294 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'." | |
| 295 @$(RM) src/Emacs.ad.h | |
| 296 @(echo "/* Do not edit this file!" ; \ | |
| 297 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \ | |
| 298 echo " */" ; \ | |
| 426 | 299 $(SHELL) ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \ |
| 380 | 300 src/Emacs.ad.h |
| 301 | |
| 302 src/sheap-adjust.h: | |
| 303 @echo "Resetting \`src/sheap-adjust.h'."; \ | |
| 304 (echo "/* Do not edit this file!" ; \ | |
| 305 echo " Automatically generated by XEmacs */" ; \ | |
| 1157 | 306 echo "#define SHEAP_ADJUSTMENT 0") > $@ |
| 380 | 307 |
| 308 src: @SRC_SUBDIR_DEPS@ FRC.src | |
| 309 pkg-src/tree-x: pkg-src/FRC.tree-x | |
| 310 lib-src: FRC.lib-src | |
| 311 lwlib: FRC.lwlib | |
| 312 dynodump: FRC.dynodump | |
| 313 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x: | |
| 314 FRC.lisp.finder-inf.el: | |
| 315 | |
| 316 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC | |
| 2427 | 317 cd ./$@ && $(MAKE) $(RECURSIVE_MAKE_ARGS) all |
| 2259 | 318 |
|
4419
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
319 ## This should be the same code as in configure.ac. |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
320 update-version: |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
321 cp ${srcdir}/version.sh.in ${srcdir}/version.sh |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
322 if test -d ${srcdir}/.hg; then \ |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
323 (cd ${srcdir}; hg identify | cut -d " " -f 1 >> version.sh); \ |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
324 fi |
|
eb82fbb675ea
Use Mercurial changeset hash to identify build version.
Mike Sperber <sperber@deinprogramm.de>
parents:
4374
diff
changeset
|
325 |
| 2259 | 326 ## Building modules depends on ellcc, found in lib-src. |
| 2973 | 327 modules/sample modules/ldap modules/zlib modules/base64: lib-src |
| 328 modules/postgresql modules/canna: lib-src | |
| 380 | 329 |
| 801 | 330 Makefile: ${srcdir}/Makefile.in.in config.status |
| 380 | 331 ./config.status |
| 2427 | 332 $(MAKE) $(RECURSIVE_MAKE_ARGS) all |
| 380 | 333 |
| 334 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status | |
| 335 ./config.status | |
| 336 | |
| 337 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status | |
| 338 ./config.status | |
| 339 | |
| 340 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status | |
| 341 ./config.status | |
| 342 | |
| 343 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status | |
| 344 ./config.status | |
| 345 | |
| 346 src/config.h: ${srcdir}/src/config.h.in | |
| 347 ./config.status && touch $@ | |
| 348 | |
| 349 src/paths.h: ${srcdir}/src/paths.h.in | |
| 350 ./config.status && touch $@ | |
| 351 | |
| 352 lwlib/config.h: ${srcdir}/lwlib/config.h.in | |
| 353 ./config.status && touch $@ | |
| 354 | |
| 1633 | 355 src/xemacs.def: $(srcdir)/src/xemacs.def.in.in |
| 356 ./config.status && touch $@ | |
| 357 | |
| 3074 | 358 etc/PROBLEMS: $(srcdir)/PROBLEMS |
| 359 cp $^ $@ | |
| 360 | |
| 380 | 361 ## ==================== Installation ==================== |
| 362 | |
| 363 ## If we let lib-src do its own installation, that means we | |
| 364 ## don't have to duplicate the list of utilities to install in | |
| 365 ## this Makefile as well. | |
| 366 | |
| 367 ## On AIX, use tar xBf. | |
| 368 ## On Xenix, use tar xpf. | |
| 369 | |
| 370 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir | |
| 1314 | 371 .PHONY: check check-features |
| 380 | 372 |
| 373 ## We delete each directory in ${COPYDESTS} before we copy into it; | |
| 374 ## that way, we can reinstall over directories that have been put in | |
| 375 ## place with their files read-only (perhaps because they are checked | |
| 376 ## into RCS). In order to make this safe, we make sure that the | |
| 377 ## source exists and is distinct from the destination. | |
| 378 | |
| 379 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that | |
| 380 ## they "won't ever modify src/paths.h". But that means you can't do | |
| 381 ## 'make install' right off the bat because src/paths.h won't exist. | |
| 382 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also | |
| 383 ## don't see the point in avoiding modifying paths.h. It creates an | |
| 384 ## inconsistency in the build process. So we go ahead and depend on | |
| 385 ## all. --cet | |
| 386 | |
| 387 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep | |
| 388 | |
| 389 install: all check-features install-arch-dep install-arch-indep | |
| 390 | |
| 391 install-arch-dep: mkdir | |
| 392 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \ | |
| 2427 | 393 (cd ./$${subdir} && $(MAKE) $(RECURSIVE_MAKE_ARGS) install prefix=${prefix} \ |
| 380 | 394 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \ |
| 395 archlibdir=${archlibdir}) ; done | |
| 396 if test "`(cd ${archlibdir} && $(pwd))`" != \ | |
| 397 "`(cd ./lib-src && $(pwd))`"; then \ | |
| 398 if test -f ../Installation; then \ | |
| 399 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \ | |
| 400 fi; \ | |
| 422 | 401 ${INSTALL_DATA} lib-src/config.values ${docdir}/config.values; \ |
| 420 | 402 ${INSTALL_DATA} lib-src/DOC ${docdir}/DOC; \ |
| 380 | 403 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \ |
| 404 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \ | |
| 405 else true; fi | |
| 2720 | 406 #if (defined(PDUMP) && !defined (DUMP_IN_EXEC)) || (defined (PDUMP) && defined(WIN32_NATIVE)) |
| 442 | 407 ${INSTALL_DATA} src/${PROGNAME}.dmp ${bindir}/${PROGNAME}-${version}-`src/${PROGNAME} -sd`.dmp |
| 408 #endif | |
| 409 #ifdef WIN32_NATIVE | |
| 424 | 410 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME} |
| 411 -chmod 0755 ${bindir}/${PROGNAME} | |
| 412 #else | |
| 2388 | 413 # ifdef CYGWIN |
| 414 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}.exe | |
| 415 -chmod 0755 ${bindir}/${PROGNAME}-${version}.exe | |
| 416 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version}.exe ./${PROGNAME} | |
| 417 # else | |
| 380 | 418 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version} |
| 419 -chmod 0755 ${bindir}/${PROGNAME}-${version} | |
| 420 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME} | |
| 442 | 421 # endif /* CYGWIN */ |
| 422 #endif /* WIN32_NATIVE */ | |
| 380 | 423 if test "${prefix}" != "${exec_prefix}"; then \ |
| 426 | 424 $(MAKEPATH) ${exec_prefix}/lib/${instvardir}; \ |
| 380 | 425 for dir in \ |
| 422 | 426 lib/${inststaticdir} \ |
| 427 lib/${instvardir}/etc \ | |
| 428 lib/${instvardir}/info \ | |
| 429 lib/${instvardir}/lisp; do \ | |
| 380 | 430 if test ! -d ${exec_prefix}/$${dir}; then \ |
| 431 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \ | |
| 432 done; \ | |
| 433 fi | |
| 997 | 434 #ifdef HAVE_SHLIB |
| 435 $(INSTALL_DATA) $(srcdir)/modules/auto-autoloads.* $(moduledir) | |
| 436 #endif | |
| 380 | 437 |
| 438 install-arch-indep: mkdir info | |
| 439 -@set ${COPYDESTS} ; \ | |
| 440 for dir in ${COPYDIR} ; do \ | |
| 441 if test "`(cd $$1 && $(pwd))`" != \ | |
| 442 "`(cd $${dir} && $(pwd))`"; then \ | |
| 443 : do nothing - echo "rm -rf $$1" ; \ | |
| 444 fi ; \ | |
| 445 shift ; \ | |
| 446 done | |
| 447 -set ${COPYDESTS} ; \ | |
| 448 for dir in ${COPYDESTS} ; do \ | |
| 449 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \ | |
| 450 done ; \ | |
| 451 for dir in ${COPYDIR} ; do \ | |
| 452 dest=$$1 ; shift ; \ | |
| 453 test -d $${dir} \ | |
| 454 -a "`(cd $${dir} && $(pwd))`" != \ | |
| 455 "`(cd $${dest} && $(pwd))`" \ | |
| 456 && (echo "Copying $${dir}..." ; \ | |
| 430 | 457 (cd $${dir} && $(TAR) -cf - . ) | \ |
| 458 (cd $${dest} && umask 022 && $(TAR) -xf - );\ | |
| 380 | 459 chmod 0755 $${dest}; \ |
| 460 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \ | |
| 461 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \ | |
| 462 done) ; \ | |
| 463 done | |
| 464 if test "`(cd ${srcdir}/info && $(pwd))`" != \ | |
| 465 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \ | |
| 466 if test ! -f ${infodir}/dir -a -f dir ; then \ | |
| 467 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \ | |
| 468 fi ; \ | |
| 469 for file in *.info* ; do \ | |
| 470 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \ | |
| 471 chmod 0644 ${infodir}/$${file}; \ | |
| 472 done ; \ | |
| 473 fi | |
| 474 cd ${srcdir}/etc && \ | |
| 475 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \ | |
| 476 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \ | |
| 477 chmod 0644 ${mandir}/$${page}${manext} ; \ | |
| 478 done | |
| 2128 | 479 @echo "If you would like to save approximately 4M of disk space, do" |
| 380 | 480 @echo "make gzip-el" |
| 481 @echo "or you may run " | |
| 482 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line." | |
| 483 @echo "Where lispdir is where the lisp files were installed, i.e.," | |
| 484 @echo "${lispdir}" | |
| 485 | |
| 486 gzip-el: | |
| 426 | 487 $(SHELL) ${srcdir}/lib-src/gzip-el.sh ${lispdir} |
| 380 | 488 |
| 489 ## Build all the directories to install XEmacs in. | |
| 490 ## Since we may be creating several layers of directories, | |
| 491 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use | |
| 492 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag. | |
| 493 mkdir: FRC.mkdir | |
| 444 | 494 ${MAKEPATH} ${COPYDESTS} ${docdir} ${infodir} ${archlibdir} \ |
| 1349 | 495 ${mandir} ${bindir} ${datadir} ${libdir} \ |
| 598 | 496 #ifdef HAVE_SHLIB |
| 497 ${moduledir} ${sitemoduledir} \ | |
| 498 #endif | |
| 499 ${sitelispdir} | |
| 380 | 500 |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
501 ## Install bundled packages, if present. |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
502 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
503 package_path = @LATE_PACKAGE_DIRECTORIES@ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
504 pkgsrcdir = ${srcdir}/etc/bundled-packages |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
505 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
506 ## #### Probably we should add a rule for lib-src/make-path here. |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
507 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
508 check-available-packages: |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
509 @if test -r ${pkgsrcdir}/bootstrap.tar.gz; \ |
|
4357
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
510 then echo "To install a set of bootstrap packages in"; \ |
|
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
511 echo "${package_path}/xemacs-packages, type:"; \ |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
512 echo " make install-bootstrap-packages"; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
513 fi; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
514 if test -r ${pkgsrcdir}/xemacs-sumo.tar.gz; \ |
|
4357
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
515 then echo "To install the full set of non-mule packages in"; \ |
|
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
516 echo "${package_path}/xemacs-packages, type:"; \ |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
517 echo " make install-nonmule-packages"; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
518 fi; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
519 if test -r ${pkgsrcdir}/xemacs-mule-sumo.tar.gz; \ |
|
4357
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
520 then echo "To install the full set of packages with mule in"; \ |
|
3af63264d320
Make check-available-packages announce where to install packages.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4354
diff
changeset
|
521 echo "${package_path}/mule-packages, type:"; \ |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
522 echo " make install-all-packages"; \ |
|
4361
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
523 fi |
|
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
524 |
|
4374
4939bde48d12
Fix incorrect comment convention.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4361
diff
changeset
|
525 ## The test for a non-trivial path simply checks for the conventional Unix |
|
4939bde48d12
Fix incorrect comment convention.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4361
diff
changeset
|
526 ## path separator ":". This is reasonable because this is basically just |
|
4939bde48d12
Fix incorrect comment convention.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4361
diff
changeset
|
527 ## a convenience feature, anyway. |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
528 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
529 mkpkgdir: FRC.mkdir ${MAKEPATH} |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
530 @if test -z ${package_path}; \ |
|
4361
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
531 then echo "Not configured --with-late-packages; no place to install."; \ |
|
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
532 exit -1; \ |
|
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
533 elif echo ${package_path} | grep ":"; \ |
|
146742e30f05
Ensure LATE_PACKAGES_DIRECTORIES is a trivial search path.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4357
diff
changeset
|
534 then echo "Configured with multiple late package directories; you decide where to install."; \ |
|
4354
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
535 exit -1; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
536 elif test -e ${package_path}/xemacs-packages \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
537 -o -e ${package_path}/mule-packages; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
538 then echo "${package_path} is installed; won't overwrite packages."; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
539 exit -1; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
540 fi |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
541 ${MAKEPATH} ${package_path}; |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
542 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
543 install-bootstrap-packages: mkpkgdir |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
544 cd ${package_path}; tar xvzf ${pkgsrcdir}/bootstrap.tar.gz |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
545 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
546 install-nonmule-packages: mkpkgdir |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
547 cd ${package_path}; tar xvzf ${pkgsrcdir}/xemacs-sumo.tar.gz |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
548 |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
549 install-all-packages: mkpkgdir |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
550 cd ${package_path}; tar xvzf ${pkgsrcdir}/xemacs-sumo.tar.gz; \ |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
551 cd ${package_path}; tar xvzf ${pkgsrcdir}/xemacs-mule-sumo.tar.gz |
|
232d873b9705
Add support for installing bundled patches.
Stephen J. Turnbull <stephen@xemacs.org>
parents:
4197
diff
changeset
|
552 |
| 380 | 553 ## Delete all the installed files that the `install' target would |
| 554 ## create (but not the noninstalled files such as `make all' would | |
| 555 ## create). | |
| 556 | |
| 557 #### Don't delete the lisp and etc directories if they're in the source tree. | |
| 558 #### This target has not been updated in sometime and until it is it | |
| 559 #### would be extremely dangerous for anyone to use it. | |
| 560 ##uninstall: | |
| 561 ## (cd ./lib-src; \ | |
| 2427 | 562 ## $(MAKE) $(RECURSIVE_MAKE_ARGS) uninstall \ |
| 380 | 563 ## prefix=${prefix} exec_prefix=${exec_prefix} \ |
| 564 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir}) | |
| 565 ## for dir in ${lispdir} ${etcdir} ; do \ | |
| 566 ## case `(cd $${dir} ; $(pwd))` in \ | |
| 567 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \ | |
| 568 ## * ) $(RM) $${dir} ;; \ | |
| 569 ## esac ; \ | |
| 570 ## case $${dir} in \ | |
| 571 ## ${datadir}/${PROGNAME}/${version}/* ) \ | |
| 572 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \ | |
| 573 ## ;; \ | |
| 574 ## esac ; \ | |
| 575 ## done | |
| 576 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip* | |
| 577 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1 | |
| 578 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME} | |
| 579 | |
| 580 | |
| 581 ## Some makes seem to remember that they've built something called FRC, | |
| 582 ## so you can only use a given FRC once per makefile. | |
| 583 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info: | |
| 3062 | 584 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.extraclean FRC.tags: |
| 585 FRC.distclean-noconfig FRC.realclean-noconfig FRC.extraclean-noconfig: | |
| 380 | 586 |
| 587 ## ==================== Cleaning up and miscellanea ==================== | |
| 588 | |
| 3062 | 589 .PHONY: mostlyclean clean distclean realclean extraclean elcclean |
| 590 .PHONY: distclean-noconfig realclean-noconfig extraclean-noconfig | |
| 591 .PHONY: top-mostlyclean top-clean top-distclean top-realclean top-extraclean | |
| 592 .PHONY: top-distclean-noconfig top-realclean-noconfig top-extraclean-noconfig | |
| 380 | 593 |
| 594 ## `mostlyclean' | |
| 595 ## Like `clean', but may refrain from deleting a few files that people | |
| 596 ## normally don't want to recompile. For example, the `mostlyclean' | |
| 597 ## target for GCC does not delete `libgcc.a', because recompiling it | |
| 598 ## is rarely necessary and takes a lot of time. | |
| 3062 | 599 top-mostlyclean: FRC.mostlyclean |
| 3083 | 600 -$(RM) core |
| 3062 | 601 |
| 602 mostlyclean: top-mostlyclean | |
| 2427 | 603 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 380 | 604 |
| 605 ## `clean' | |
| 606 ## Delete all files from the current directory that are normally | |
| 607 ## created by building the program. Don't delete the files that | |
| 608 ## record the configuration. Also preserve files that could be made | |
| 609 ## by building, but normally aren't because the distribution comes | |
| 610 ## with them. | |
| 611 | |
| 612 ## Delete `.dvi' files here if they are not part of the distribution. | |
| 1889 | 613 |
| 614 ## Remove the generated load files here; they cause lots of problems | |
| 615 ## when they don't work right. (beta can't depend on distclean, which | |
| 616 ## removes necessary files generated by configure.) | |
| 3062 | 617 top-clean: FRC.clean |
| 3083 | 618 -$(RM) core lisp/auto-autoloads.el* lisp/custom-load.el* |
| 619 -$(RM) lisp/mule/auto-autoloads.el* lisp/mule/custom-load.el* | |
| 620 -$(RM) modules/auto-autoloads.el* modules/custom-load.el* | |
| 621 -$(RM) etc/PROBLEMS | |
| 380 | 622 |
| 3062 | 623 clean: top-mostlyclean top-clean |
| 624 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done | |
| 625 | |
| 626 ## `distclean-noconfig' | |
| 627 ## Like `distclean' but don't delete files created by `configure'. | |
| 628 top-distclean-noconfig: FRC.distclean-noconfig | |
| 3083 | 629 -$(RM) TAGS .sbinit lock/* lisp/finder-inf.el* |
| 3062 | 630 |
| 631 distclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig | |
| 632 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done | |
| 633 | |
| 380 | 634 ## `distclean' |
| 635 ## Delete all files from the current directory that are created by | |
| 636 ## configuring or building the program. If you have unpacked the | |
| 637 ## source and built the program without creating any other files, | |
| 638 ## `make distclean' should leave only the files that were in the | |
| 639 ## distribution. | |
| 3062 | 640 top-distclean: FRC.distclean |
| 3083 | 641 -$(RM) config.status config.log confdefs.h config-tmp-* build-install Installation |
| 642 -$(RM) GNUmakefile Makefile Makefile.in | |
| 643 -$(RM) Installation.el Installation.elc | |
| 3062 | 644 |
| 645 distclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean | |
| 646 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done | |
| 380 | 647 |
| 3062 | 648 ## `realclean-noconfig' |
| 649 ## Delete everything that can be reconstructed by `make'. Don't delete | |
| 650 ## anything requiring reconfiguration. | |
| 651 top-realclean-noconfig: FRC.realclean-noconfig | |
| 3083 | 652 -$(RM) *.elc lisp/*.elc lisp/mule/*.elc lisp/term/*.elc modules/*.elc |
| 3062 | 653 |
| 654 realclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig top-realclean-noconfig | |
| 2427 | 655 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 3062 | 656 |
| 657 top-realclean: FRC.realclean | |
| 658 | |
| 659 elcclean: realclean-noconfig | |
| 380 | 660 |
| 661 ## `realclean' | |
| 662 ## Delete everything from the current directory that can be | |
| 663 ## reconstructed with this Makefile. This typically includes | |
| 664 ## everything deleted by distclean, plus more: C source files | |
| 665 ## produced by Bison, tags tables, info files, and so on. | |
| 666 | |
| 667 ## One exception, however: `make realclean' should not delete | |
| 668 ## `configure' even if `configure' can be remade using a rule in the | |
| 669 ## Makefile. More generally, `make realclean' should not delete | |
| 670 ## anything that needs to exist in order to run `configure' and then | |
| 671 ## begin to build the program. | |
| 3062 | 672 realclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean top-realclean-noconfig top-realclean |
| 2427 | 673 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 3062 | 674 |
| 675 ## `extraclean-noconfig' | |
| 676 ## Like `extraclean' but don't delete anything requiring reconfiguration. | |
| 677 top-extraclean-noconfig: FRC.extraclean-noconfig | |
| 3083 | 678 -$(RM) *~ \#* |
| 3062 | 679 |
| 680 extraclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig top-realclean-noconfig top-extraclean-noconfig | |
| 681 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done | |
| 380 | 682 |
| 683 ## This doesn't actually appear in the coding standards, but Karl | |
| 684 ## says GCC supports it, and that's where the configuration part of | |
| 685 ## the coding standards seem to come from. It's like distclean, but | |
| 686 ## it deletes backup and autosave files too. | |
| 3062 | 687 top-extraclean: FRC.extraclean |
| 688 | |
| 689 extraclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean top-realclean-noconfig top-realclean top-extraclean-noconfig top-extraclean | |
| 2427 | 690 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 380 | 691 |
| 692 ## Unlocking and relocking. The idea of these productions is to reduce | |
| 693 ## hassles when installing an incremental tar of XEmacs. Do `make unlock' | |
| 694 ## before unlocking the file to take the write locks off all sources so | |
| 695 ## that tar xvof will overwrite them without fuss. Then do `make relock' | |
| 696 ## afterward so that VC mode will know which files should be checked in | |
| 697 ## if you want to mung them. | |
| 698 | |
| 699 ## Note: it's no disaster if these productions miss a file or two; tar | |
| 700 ## and VC will swiftly let you know if this happens, and it is easily | |
| 701 ## corrected. | |
| 2536 | 702 SOURCES = ChangeLog INSTALL Makefile.in.in PROBLEMS \ |
| 380 | 703 README build-install.in configure make-dist move-if-change |
| 704 | |
| 1314 | 705 .PHONY: unlock relock TAGS tags dist info dvi mcs |
| 380 | 706 |
| 707 unlock: | |
| 708 chmod u+w $(SOURCES) cpp/* | |
| 709 -cd ./elisp && chmod u+w Makefile README *.texi | |
| 2427 | 710 for d in src etc lib-src lisp; do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 380 | 711 cd ./lisp/term && chmod u+w README *.el |
| 712 cd ./man && chmod u+w *texi* ChangeLog split-man | |
| 713 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in | |
| 714 | |
| 715 relock: | |
| 716 chmod u-w $(SOURCES) cpp/* | |
| 717 -cd ./elisp && chmod u-w Makefile README *.texi | |
| 2427 | 718 for d in src etc lib-src lisp; do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done |
| 380 | 719 cd ./lisp/term && chmod u+w README *.el |
| 720 cd ./man && chmod u+w *texi* ChangeLog split-man | |
| 721 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in | |
| 722 | |
| 723 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o | |
| 724 tagslisp = lisp | |
| 725 TAGS tags: FRC.tags | |
| 726 @echo "If you don't have a copy of etags around, then do 'make lib-src' first." | |
| 3083 | 727 -$(RM) ${srcdir}/TAGS |
| 380 | 728 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \ |
| 729 echo "Using etags from `which etags`." | |
| 730 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \ | |
| 1011 | 731 find src lwlib lib-src modules ${PRUNE_VC} -name '*.[ch]' -print | \ |
| 1441 | 732 xargs etags -a \ |
| 733 -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/' \ | |
| 734 -r '/^DEFUN[ ]*([ ]*"\([^"]+\)"[ ]*,[ ]*\([A-Za-z0-9_]+\)/\2/'; \ | |
| 380 | 735 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \ |
| 736 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/" | |
| 737 | |
| 738 info: FRC.info | |
| 2427 | 739 cd ${srcdir}/man && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@ |
| 380 | 740 |
| 741 dvi: | |
| 2427 | 742 cd ${srcdir}/man && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@ |
| 380 | 743 |
| 744 ## Fix up version information in executables (Solaris-only) | |
| 745 mcs: | |
| 746 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \ | |
| 747 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \ | |
| 748 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \ | |
| 749 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \ | |
| 750 done |