Mercurial > hg > xemacs-beta
annotate src/event-stream.c @ 5028:b7232de2a937
Add information about repos and VCSes to FAQ.
| author | Stephen J. Turnbull <stephen@xemacs.org> |
|---|---|
| date | Wed, 10 Feb 2010 20:51:51 +0900 |
| parents | 16112448d484 |
| children | 6f2158fa75ed b5df3737028a |
| rev | line source |
|---|---|
| 428 | 1 /* The portable interface to event streams. |
| 2 Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. | |
| 3 Copyright (C) 1995 Board of Trustees, University of Illinois. | |
| 4 Copyright (C) 1995 Sun Microsystems, Inc. | |
| 1268 | 5 Copyright (C) 1995, 1996, 2001, 2002, 2003 Ben Wing. |
| 428 | 6 |
| 7 This file is part of XEmacs. | |
| 8 | |
| 9 XEmacs is free software; you can redistribute it and/or modify it | |
| 10 under the terms of the GNU General Public License as published by the | |
| 11 Free Software Foundation; either version 2, or (at your option) any | |
| 12 later version. | |
| 13 | |
| 14 XEmacs is distributed in the hope that it will be useful, but WITHOUT | |
| 15 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 16 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| 17 for more details. | |
| 18 | |
| 19 You should have received a copy of the GNU General Public License | |
| 20 along with XEmacs; see the file COPYING. If not, write to | |
| 21 the Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
| 22 Boston, MA 02111-1307, USA. */ | |
| 23 | |
| 24 /* Synched up with: Not in FSF. */ | |
| 25 | |
| 442 | 26 /* Authorship: |
| 27 | |
| 28 Created 1991 by Jamie Zawinski. | |
| 29 A great deal of work over the ages by Ben Wing (Mule-ization for 19.12, | |
| 30 device abstraction for 19.12/19.13, async timers for 19.14, | |
| 31 rewriting of focus code for 19.12, pre-idle hook for 19.12, | |
| 32 redoing of signal and quit handling for 19.9 and 19.12, | |
| 33 misc-user events to clean up menu/scrollbar handling for 19.11, | |
| 34 function-key-map/key-translation-map/keyboard-translate-table for | |
| 35 19.13/19.14, open-dribble-file for 19.13, much other cleanup). | |
| 36 focus-follows-mouse from Chuck Thompson, 1995. | |
| 37 XIM stuff by Martin Buchholz, c. 1996?. | |
| 38 */ | |
| 39 | |
| 428 | 40 /* This file has been Mule-ized. */ |
| 41 | |
| 42 /* | |
| 43 * DANGER!! | |
| 44 * | |
| 45 * If you ever change ANYTHING in this file, you MUST run the | |
| 46 * testcases at the end to make sure that you haven't changed | |
| 47 * the semantics of recent-keys, last-input-char, or keyboard | |
| 48 * macros. You'd be surprised how easy it is to break this. | |
| 49 * | |
| 50 */ | |
| 51 | |
| 52 /* TODO: | |
| 1204 | 53 [This stuff is way too hard to maintain - needs rework.] |
| 54 I don't think it's that bad in the main. I've done a fair amount of | |
| 55 cleanup work over the ages; the only stuff that's probably still somewhat | |
| 56 messy is the command-builder handling, which is that way because it's | |
| 57 trying to be "compatible" with pseudo-standards established by Emacs | |
| 58 v18. | |
| 428 | 59 |
| 60 The command builder should deal only with key and button events. | |
| 61 Other command events should be able to come in the MIDDLE of a key | |
| 62 sequence, without disturbing the key sequence composition, or the | |
| 63 command builder structure representing it. | |
| 64 | |
| 65 Someone should rethink universal-argument and figure out how an | |
| 66 arbitrary command can influence the next command (universal-argument | |
| 67 or universal-coding-system-argument) or the next key (hyperify). | |
| 68 | |
| 69 Both C-h and Help in the middle of a key sequence should trigger | |
| 70 prefix-help-command. help-char is stupid. Maybe we need | |
| 71 keymap-of-last-resort? | |
| 72 | |
| 73 After prefix-help is run, one should be able to CONTINUE TYPING, | |
| 74 instead of RETYPING, the key sequence. | |
| 75 */ | |
| 76 | |
| 77 #include <config.h> | |
| 78 #include "lisp.h" | |
| 79 | |
| 80 #include "blocktype.h" | |
| 81 #include "buffer.h" | |
| 82 #include "commands.h" | |
| 872 | 83 #include "device-impl.h" |
| 428 | 84 #include "elhash.h" |
| 85 #include "events.h" | |
| 872 | 86 #include "frame-impl.h" |
| 428 | 87 #include "insdel.h" /* for buffer_reset_changes */ |
| 88 #include "keymap.h" | |
| 89 #include "lstream.h" | |
| 90 #include "macros.h" /* for defining_keyboard_macro */ | |
| 442 | 91 #include "menubar.h" /* #### for evil kludges. */ |
| 428 | 92 #include "process.h" |
| 1292 | 93 #include "profile.h" |
| 872 | 94 #include "window-impl.h" |
| 428 | 95 |
| 96 #include "sysdep.h" /* init_poll_for_quit() */ | |
| 97 #include "syssignal.h" /* SIGCHLD, etc. */ | |
| 98 #include "sysfile.h" | |
| 99 #include "systime.h" /* to set Vlast_input_time */ | |
| 100 | |
| 101 #include "file-coding.h" | |
| 102 | |
| 103 #include <errno.h> | |
| 104 | |
| 105 /* The number of keystrokes between auto-saves. */ | |
| 458 | 106 static Fixnum auto_save_interval; |
| 428 | 107 |
| 108 Lisp_Object Qundefined_keystroke_sequence; | |
| 563 | 109 Lisp_Object Qinvalid_key_binding; |
| 428 | 110 |
| 111 Lisp_Object Qcommand_event_p; | |
| 112 | |
| 113 /* Hooks to run before and after each command. */ | |
| 114 Lisp_Object Vpre_command_hook, Vpost_command_hook; | |
| 115 Lisp_Object Qpre_command_hook, Qpost_command_hook; | |
| 116 | |
| 442 | 117 /* See simple.el */ |
| 118 Lisp_Object Qhandle_pre_motion_command, Qhandle_post_motion_command; | |
| 119 | |
| 428 | 120 /* Hook run when XEmacs is about to be idle. */ |
| 121 Lisp_Object Qpre_idle_hook, Vpre_idle_hook; | |
| 122 | |
| 123 /* Control gratuitous keyboard focus throwing. */ | |
| 124 int focus_follows_mouse; | |
| 125 | |
| 444 | 126 /* When true, modifier keys are sticky. */ |
| 442 | 127 int modifier_keys_are_sticky; |
| 444 | 128 /* Modifier keys are sticky for this many milliseconds. */ |
| 129 Lisp_Object Vmodifier_keys_sticky_time; | |
| 130 | |
| 2828 | 131 /* If true, "Russian C-x processing" is enabled. */ |
| 132 int try_alternate_layouts_for_commands; | |
| 133 | |
| 444 | 134 /* Here FSF Emacs 20.7 defines Vpost_command_idle_hook, |
| 135 post_command_idle_delay, Vdeferred_action_list, and | |
| 136 Vdeferred_action_function, but we don't because that stuff is crap, | |
| 1315 | 137 and we're smarter than them, and their mommas are fat. */ |
| 444 | 138 |
| 139 /* FSF Emacs 20.7 also defines Vinput_method_function, | |
| 140 Qinput_method_exit_on_first_char and Qinput_method_use_echo_area. | |
| 1315 | 141 I don't know whether this should be imported or not. */ |
| 428 | 142 |
| 143 /* Non-nil disable property on a command means | |
| 144 do not execute it; call disabled-command-hook's value instead. */ | |
| 733 | 145 Lisp_Object Qdisabled; |
| 428 | 146 |
| 147 /* Last keyboard or mouse input event read as a command. */ | |
| 148 Lisp_Object Vlast_command_event; | |
| 149 | |
| 150 /* The nearest ASCII equivalent of the above. */ | |
| 151 Lisp_Object Vlast_command_char; | |
| 152 | |
| 153 /* Last keyboard or mouse event read for any purpose. */ | |
| 154 Lisp_Object Vlast_input_event; | |
| 155 | |
| 156 /* The nearest ASCII equivalent of the above. */ | |
| 157 Lisp_Object Vlast_input_char; | |
| 158 | |
| 159 Lisp_Object Vcurrent_mouse_event; | |
| 160 | |
| 161 /* This is fbound in cmdloop.el, see the commentary there */ | |
| 162 Lisp_Object Qcancel_mode_internal; | |
| 163 | |
| 164 /* If not Qnil, event objects to be read as the next command input */ | |
| 165 Lisp_Object Vunread_command_events; | |
| 166 Lisp_Object Vunread_command_event; /* obsoleteness support */ | |
| 167 | |
| 168 static Lisp_Object Qunread_command_events, Qunread_command_event; | |
| 169 | |
| 170 /* Previous command, represented by a Lisp object. | |
| 442 | 171 Does not include prefix commands and arg setting commands. */ |
| 428 | 172 Lisp_Object Vlast_command; |
| 173 | |
| 442 | 174 /* Contents of this-command-properties for the last command. */ |
| 175 Lisp_Object Vlast_command_properties; | |
| 176 | |
| 428 | 177 /* If a command sets this, the value goes into |
| 442 | 178 last-command for the next command. */ |
| 428 | 179 Lisp_Object Vthis_command; |
| 180 | |
| 442 | 181 /* If a command sets this, the value goes into |
| 182 last-command-properties for the next command. */ | |
| 183 Lisp_Object Vthis_command_properties; | |
| 184 | |
| 428 | 185 /* The value of point when the last command was executed. */ |
| 665 | 186 Charbpos last_point_position; |
| 428 | 187 |
| 188 /* The frame that was current when the last command was started. */ | |
| 189 Lisp_Object Vlast_selected_frame; | |
| 190 | |
| 191 /* The buffer that was current when the last command was started. */ | |
| 192 Lisp_Object last_point_position_buffer; | |
| 193 | |
| 194 /* A (16bit . 16bit) representation of the time of the last-command-event. */ | |
| 195 Lisp_Object Vlast_input_time; | |
| 196 | |
| 197 /* A (16bit 16bit usec) representation of the time | |
| 198 of the last-command-event. */ | |
| 199 Lisp_Object Vlast_command_event_time; | |
| 200 | |
| 201 /* Character to recognize as the help char. */ | |
| 202 Lisp_Object Vhelp_char; | |
| 203 | |
| 204 /* Form to execute when help char is typed. */ | |
| 205 Lisp_Object Vhelp_form; | |
| 206 | |
| 207 /* Command to run when the help character follows a prefix key. */ | |
| 208 Lisp_Object Vprefix_help_command; | |
| 209 | |
| 210 /* Flag to tell QUIT that some interesting occurrence (e.g. a keypress) | |
| 211 may have happened. */ | |
| 212 volatile int something_happened; | |
| 213 | |
| 214 /* Hash table to translate keysyms through */ | |
| 215 Lisp_Object Vkeyboard_translate_table; | |
| 216 | |
| 217 /* If control-meta-super-shift-X is undefined, try control-meta-super-x */ | |
| 218 Lisp_Object Vretry_undefined_key_binding_unshifted; | |
| 219 Lisp_Object Qretry_undefined_key_binding_unshifted; | |
| 220 | |
| 221 /* Console that corresponds to our controlling terminal */ | |
| 222 Lisp_Object Vcontrolling_terminal; | |
| 223 | |
| 224 /* An event (actually an event chain linked through event_next) or Qnil. | |
| 225 */ | |
| 226 Lisp_Object Vthis_command_keys; | |
| 227 Lisp_Object Vthis_command_keys_tail; | |
| 228 | |
| 229 /* #### kludge! */ | |
| 230 Lisp_Object Qauto_show_make_point_visible; | |
| 231 | |
| 232 /* File in which we write all commands we read; an lstream */ | |
| 233 static Lisp_Object Vdribble_file; | |
| 234 | |
| 235 /* Recent keys ring location; a vector of events or nil-s */ | |
| 236 Lisp_Object Vrecent_keys_ring; | |
| 237 int recent_keys_ring_size; | |
| 238 int recent_keys_ring_index; | |
| 239 | |
| 240 /* Boolean specifying whether keystrokes should be added to | |
| 241 recent-keys. */ | |
| 242 int inhibit_input_event_recording; | |
| 243 | |
| 430 | 244 Lisp_Object Qself_insert_defer_undo; |
| 245 | |
| 1268 | 246 int in_modal_loop; |
| 247 | |
| 248 /* the number of keyboard characters read. callint.c wants this. */ | |
| 249 Charcount num_input_chars; | |
| 428 | 250 |
| 1292 | 251 static Lisp_Object Qnext_event, Qdispatch_event, QSnext_event_internal; |
| 252 static Lisp_Object QSexecute_internal_event; | |
| 253 | |
| 428 | 254 #ifdef DEBUG_XEMACS |
| 458 | 255 Fixnum debug_emacs_events; |
| 428 | 256 |
| 257 static void | |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
258 external_debugging_print_event (const Ascbyte *event_description, |
|
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
259 Lisp_Object event) |
| 428 | 260 { |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
261 write_ascstring (Qexternal_debugging_output, "("); |
|
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
262 write_ascstring (Qexternal_debugging_output, event_description); |
|
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
263 write_ascstring (Qexternal_debugging_output, ") "); |
| 428 | 264 print_internal (event, Qexternal_debugging_output, 1); |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
265 write_ascstring (Qexternal_debugging_output, "\n"); |
| 428 | 266 } |
| 267 #define DEBUG_PRINT_EMACS_EVENT(event_description, event) do { \ | |
| 268 if (debug_emacs_events) \ | |
| 269 external_debugging_print_event (event_description, event); \ | |
| 270 } while (0) | |
| 271 #else | |
| 272 #define DEBUG_PRINT_EMACS_EVENT(string, event) | |
| 273 #endif | |
| 274 | |
| 275 | |
| 276 /* The callback routines for the window system or terminal driver */ | |
| 277 struct event_stream *event_stream; | |
| 278 | |
| 2367 | 279 |
| 280 /* | |
| 281 | |
| 282 See also | |
| 283 | |
| 284 (Info-goto-node "(internals)Event Stream Callback Routines") | |
| 285 */ | |
| 1204 | 286 |
| 428 | 287 static Lisp_Object command_event_queue; |
| 288 static Lisp_Object command_event_queue_tail; | |
| 289 | |
| 1204 | 290 Lisp_Object dispatch_event_queue; |
| 291 static Lisp_Object dispatch_event_queue_tail; | |
| 292 | |
| 428 | 293 /* Nonzero means echo unfinished commands after this many seconds of pause. */ |
| 294 static Lisp_Object Vecho_keystrokes; | |
| 295 | |
| 296 /* The number of keystrokes since the last auto-save. */ | |
| 297 static int keystrokes_since_auto_save; | |
| 298 | |
| 299 /* Used by the C-g signal handler so that it will never "hard quit" | |
| 300 when waiting for an event. Otherwise holding down C-g could | |
| 301 cause a suspension back to the shell, which is generally | |
| 302 undesirable. (#### This doesn't fully work.) */ | |
| 303 | |
| 304 int emacs_is_blocking; | |
| 305 | |
| 306 /* Handlers which run during sit-for, sleep-for and accept-process-output | |
| 307 are not allowed to recursively call these routines. We record here | |
| 308 if we are in that situation. */ | |
| 309 | |
| 1268 | 310 static int recursive_sit_for; |
| 311 | |
| 312 static void pre_command_hook (void); | |
| 313 static void post_command_hook (void); | |
| 314 static void maybe_kbd_translate (Lisp_Object event); | |
| 315 static void push_this_command_keys (Lisp_Object event); | |
| 316 static void push_recent_keys (Lisp_Object event); | |
| 317 static void dribble_out_event (Lisp_Object event); | |
| 318 static void execute_internal_event (Lisp_Object event); | |
| 319 static int is_scrollbar_event (Lisp_Object event); | |
| 428 | 320 |
| 321 | |
| 322 /**********************************************************************/ | |
| 323 /* Command-builder object */ | |
| 324 /**********************************************************************/ | |
| 325 | |
| 326 #define XCOMMAND_BUILDER(x) \ | |
| 327 XRECORD (x, command_builder, struct command_builder) | |
| 771 | 328 #define wrap_command_builder(p) wrap_record (p, command_builder) |
| 428 | 329 #define COMMAND_BUILDERP(x) RECORDP (x, command_builder) |
| 330 #define CHECK_COMMAND_BUILDER(x) CHECK_RECORD (x, command_builder) | |
| 771 | 331 #define CONCHECK_COMMAND_BUILDER(x) CONCHECK_RECORD (x, command_builder) |
| 332 | |
| 3263 | 333 #ifndef NEW_GC |
| 771 | 334 static Lisp_Object Vcommand_builder_free_list; |
| 3263 | 335 #endif /* not NEW_GC */ |
| 428 | 336 |
| 1204 | 337 static const struct memory_description command_builder_description [] = { |
| 934 | 338 { XD_LISP_OBJECT, offsetof (struct command_builder, current_events) }, |
| 339 { XD_LISP_OBJECT, offsetof (struct command_builder, most_current_event) }, | |
| 340 { XD_LISP_OBJECT, offsetof (struct command_builder, last_non_munged_event) }, | |
| 341 { XD_LISP_OBJECT, offsetof (struct command_builder, console) }, | |
| 1204 | 342 { XD_LISP_OBJECT_ARRAY, offsetof (struct command_builder, first_mungeable_event), 2 }, |
| 934 | 343 { XD_END } |
| 344 }; | |
| 345 | |
| 428 | 346 static Lisp_Object |
| 347 mark_command_builder (Lisp_Object obj) | |
| 348 { | |
| 349 struct command_builder *builder = XCOMMAND_BUILDER (obj); | |
| 350 mark_object (builder->current_events); | |
| 351 mark_object (builder->most_current_event); | |
| 352 mark_object (builder->last_non_munged_event); | |
| 1204 | 353 mark_object (builder->first_mungeable_event[0]); |
| 354 mark_object (builder->first_mungeable_event[1]); | |
| 428 | 355 return builder->console; |
| 356 } | |
| 357 | |
| 358 static void | |
| 359 finalize_command_builder (void *header, int for_disksave) | |
| 360 { | |
| 361 if (!for_disksave) | |
| 362 { | |
| 771 | 363 struct command_builder *b = (struct command_builder *) header; |
| 364 if (b->echo_buf) | |
| 365 { | |
|
4976
16112448d484
Rename xfree(FOO, TYPE) -> xfree(FOO)
Ben Wing <ben@xemacs.org>
parents:
4952
diff
changeset
|
366 xfree (b->echo_buf); |
| 771 | 367 b->echo_buf = 0; |
| 368 } | |
| 428 | 369 } |
| 370 } | |
| 371 | |
| 934 | 372 DEFINE_LRECORD_IMPLEMENTATION ("command-builder", command_builder, |
| 373 0, /*dumpable-flag*/ | |
| 374 mark_command_builder, internal_object_printer, | |
| 375 finalize_command_builder, 0, 0, | |
| 376 command_builder_description, | |
| 377 struct command_builder); | |
| 771 | 378 |
| 428 | 379 static void |
| 380 reset_command_builder_event_chain (struct command_builder *builder) | |
| 381 { | |
| 382 builder->current_events = Qnil; | |
| 383 builder->most_current_event = Qnil; | |
| 384 builder->last_non_munged_event = Qnil; | |
| 1204 | 385 builder->first_mungeable_event[0] = Qnil; |
| 386 builder->first_mungeable_event[1] = Qnil; | |
| 428 | 387 } |
| 388 | |
| 389 Lisp_Object | |
| 771 | 390 allocate_command_builder (Lisp_Object console, int with_echo_buf) |
| 428 | 391 { |
| 771 | 392 Lisp_Object builder_obj = |
| 3263 | 393 #ifdef NEW_GC |
| 2720 | 394 wrap_pointer_1 (alloc_lrecord_type (struct command_builder, |
| 395 &lrecord_command_builder)); | |
| 3263 | 396 #else /* not NEW_GC */ |
| 1204 | 397 alloc_managed_lcrecord (Vcommand_builder_free_list); |
| 3263 | 398 #endif /* not NEW_GC */ |
| 771 | 399 struct command_builder *builder = XCOMMAND_BUILDER (builder_obj); |
| 428 | 400 |
| 401 builder->console = console; | |
| 402 reset_command_builder_event_chain (builder); | |
| 771 | 403 if (with_echo_buf) |
| 404 { | |
| 405 /* #### This badly needs to be turned into a Dynarr */ | |
| 406 builder->echo_buf_length = 300; /* #### Kludge */ | |
| 867 | 407 builder->echo_buf = xnew_array (Ibyte, builder->echo_buf_length); |
| 771 | 408 builder->echo_buf[0] = 0; |
| 409 } | |
| 410 else | |
| 411 { | |
| 412 builder->echo_buf_length = 0; | |
| 413 builder->echo_buf = NULL; | |
| 414 } | |
| 428 | 415 builder->echo_buf_index = -1; |
| 416 builder->self_insert_countdown = 0; | |
| 417 | |
| 418 return builder_obj; | |
| 419 } | |
| 420 | |
| 771 | 421 /* Copy or clone COLLAPSING (copy to NEW_BUILDINGS if non-zero, |
| 422 otherwise clone); but don't copy the echo-buf stuff. (The calling | |
| 423 routines don't need it and will reset it, and we would rather avoid | |
| 424 malloc.) */ | |
| 425 | |
| 426 static Lisp_Object | |
| 427 copy_command_builder (struct command_builder *collapsing, | |
| 428 struct command_builder *new_buildings) | |
| 429 { | |
| 430 if (!new_buildings) | |
| 431 new_buildings = XCOMMAND_BUILDER (allocate_command_builder (Qnil, 0)); | |
| 432 | |
| 3358 | 433 new_buildings->console = collapsing->console; |
| 434 | |
| 771 | 435 new_buildings->self_insert_countdown = collapsing->self_insert_countdown; |
| 436 | |
| 437 deallocate_event_chain (new_buildings->current_events); | |
| 438 new_buildings->current_events = | |
| 439 copy_event_chain (collapsing->current_events); | |
| 440 | |
| 441 new_buildings->most_current_event = | |
| 442 transfer_event_chain_pointer (collapsing->most_current_event, | |
| 443 collapsing->current_events, | |
| 444 new_buildings->current_events); | |
| 445 new_buildings->last_non_munged_event = | |
| 446 transfer_event_chain_pointer (collapsing->last_non_munged_event, | |
| 447 collapsing->current_events, | |
| 448 new_buildings->current_events); | |
| 1204 | 449 new_buildings->first_mungeable_event[0] = |
| 450 transfer_event_chain_pointer (collapsing->first_mungeable_event[0], | |
| 771 | 451 collapsing->current_events, |
| 452 new_buildings->current_events); | |
| 1204 | 453 new_buildings->first_mungeable_event[1] = |
| 454 transfer_event_chain_pointer (collapsing->first_mungeable_event[1], | |
| 771 | 455 collapsing->current_events, |
| 456 new_buildings->current_events); | |
| 457 | |
| 458 return wrap_command_builder (new_buildings); | |
| 459 } | |
| 460 | |
| 461 static void | |
| 462 free_command_builder (struct command_builder *builder) | |
| 463 { | |
| 464 if (builder->echo_buf) | |
| 465 { | |
|
4976
16112448d484
Rename xfree(FOO, TYPE) -> xfree(FOO)
Ben Wing <ben@xemacs.org>
parents:
4952
diff
changeset
|
466 xfree (builder->echo_buf); |
| 771 | 467 builder->echo_buf = NULL; |
| 468 } | |
| 3263 | 469 #ifdef NEW_GC |
| 2720 | 470 free_lrecord (wrap_command_builder (builder)); |
| 3263 | 471 #else /* not NEW_GC */ |
| 771 | 472 free_managed_lcrecord (Vcommand_builder_free_list, |
| 473 wrap_command_builder (builder)); | |
| 3263 | 474 #endif /* not NEW_GC */ |
| 771 | 475 } |
| 476 | |
| 428 | 477 static void |
| 478 command_builder_append_event (struct command_builder *builder, | |
| 479 Lisp_Object event) | |
| 480 { | |
| 481 assert (EVENTP (event)); | |
| 482 | |
| 771 | 483 event = Fcopy_event (event, Qnil); |
| 428 | 484 if (EVENTP (builder->most_current_event)) |
| 485 XSET_EVENT_NEXT (builder->most_current_event, event); | |
| 486 else | |
| 487 builder->current_events = event; | |
| 488 | |
| 489 builder->most_current_event = event; | |
| 1204 | 490 if (NILP (builder->first_mungeable_event[0])) |
| 491 builder->first_mungeable_event[0] = event; | |
| 492 if (NILP (builder->first_mungeable_event[1])) | |
| 493 builder->first_mungeable_event[1] = event; | |
| 428 | 494 } |
| 495 | |
| 496 | |
| 497 /**********************************************************************/ | |
| 498 /* Low-level interfaces onto event methods */ | |
| 499 /**********************************************************************/ | |
| 500 | |
| 501 static void | |
| 1268 | 502 check_event_stream_ok (void) |
| 428 | 503 { |
| 504 if (!event_stream && noninteractive) | |
| 814 | 505 /* See comment in init_event_stream() */ |
| 506 init_event_stream (); | |
| 507 else assert (event_stream); | |
| 428 | 508 } |
| 509 | |
| 510 void | |
| 440 | 511 event_stream_handle_magic_event (Lisp_Event *event) |
| 428 | 512 { |
| 1268 | 513 check_event_stream_ok (); |
| 428 | 514 event_stream->handle_magic_event_cb (event); |
| 515 } | |
| 516 | |
| 788 | 517 void |
| 518 event_stream_format_magic_event (Lisp_Event *event, Lisp_Object pstream) | |
| 519 { | |
| 1268 | 520 check_event_stream_ok (); |
| 788 | 521 event_stream->format_magic_event_cb (event, pstream); |
| 522 } | |
| 523 | |
| 524 int | |
| 525 event_stream_compare_magic_event (Lisp_Event *e1, Lisp_Event *e2) | |
| 526 { | |
| 1268 | 527 check_event_stream_ok (); |
| 788 | 528 return event_stream->compare_magic_event_cb (e1, e2); |
| 529 } | |
| 530 | |
| 531 Hashcode | |
| 532 event_stream_hash_magic_event (Lisp_Event *e) | |
| 533 { | |
| 1268 | 534 check_event_stream_ok (); |
| 788 | 535 return event_stream->hash_magic_event_cb (e); |
| 536 } | |
| 537 | |
| 428 | 538 static int |
| 539 event_stream_add_timeout (EMACS_TIME timeout) | |
| 540 { | |
| 1268 | 541 check_event_stream_ok (); |
| 428 | 542 return event_stream->add_timeout_cb (timeout); |
| 543 } | |
| 544 | |
| 545 static void | |
| 546 event_stream_remove_timeout (int id) | |
| 547 { | |
| 1268 | 548 check_event_stream_ok (); |
| 428 | 549 event_stream->remove_timeout_cb (id); |
| 550 } | |
| 551 | |
| 552 void | |
| 553 event_stream_select_console (struct console *con) | |
| 554 { | |
| 1268 | 555 check_event_stream_ok (); |
| 428 | 556 if (!con->input_enabled) |
| 557 { | |
| 558 event_stream->select_console_cb (con); | |
| 559 con->input_enabled = 1; | |
| 560 } | |
| 561 } | |
| 562 | |
| 563 void | |
| 564 event_stream_unselect_console (struct console *con) | |
| 565 { | |
| 1268 | 566 check_event_stream_ok (); |
| 428 | 567 if (con->input_enabled) |
| 568 { | |
| 569 event_stream->unselect_console_cb (con); | |
| 570 con->input_enabled = 0; | |
| 571 } | |
| 572 } | |
| 573 | |
| 574 void | |
| 853 | 575 event_stream_select_process (Lisp_Process *proc, int doin, int doerr) |
| 428 | 576 { |
| 853 | 577 int cur_in, cur_err; |
| 578 | |
| 1268 | 579 check_event_stream_ok (); |
| 853 | 580 |
| 581 cur_in = get_process_selected_p (proc, 0); | |
| 582 if (cur_in) | |
| 583 doin = 0; | |
| 584 | |
| 585 if (!process_has_separate_stderr (wrap_process (proc))) | |
| 428 | 586 { |
| 853 | 587 doerr = 0; |
| 588 cur_err = 0; | |
| 589 } | |
| 590 else | |
| 591 { | |
| 592 cur_err = get_process_selected_p (proc, 1); | |
| 593 if (cur_err) | |
| 594 doerr = 0; | |
| 595 } | |
| 596 | |
| 597 if (doin || doerr) | |
| 598 { | |
| 599 event_stream->select_process_cb (proc, doin, doerr); | |
| 600 set_process_selected_p (proc, cur_in || doin, cur_err || doerr); | |
| 428 | 601 } |
| 602 } | |
| 603 | |
| 604 void | |
| 853 | 605 event_stream_unselect_process (Lisp_Process *proc, int doin, int doerr) |
| 428 | 606 { |
| 853 | 607 int cur_in, cur_err; |
| 608 | |
| 1268 | 609 check_event_stream_ok (); |
| 853 | 610 |
| 611 cur_in = get_process_selected_p (proc, 0); | |
| 612 if (!cur_in) | |
| 613 doin = 0; | |
| 614 | |
| 615 if (!process_has_separate_stderr (wrap_process (proc))) | |
| 428 | 616 { |
| 853 | 617 doerr = 0; |
| 618 cur_err = 0; | |
| 619 } | |
| 620 else | |
| 621 { | |
| 622 cur_err = get_process_selected_p (proc, 1); | |
| 623 if (!cur_err) | |
| 624 doerr = 0; | |
| 625 } | |
| 626 | |
| 627 if (doin || doerr) | |
| 628 { | |
| 629 event_stream->unselect_process_cb (proc, doin, doerr); | |
| 630 set_process_selected_p (proc, cur_in && !doin, cur_err && !doerr); | |
| 428 | 631 } |
| 632 } | |
| 633 | |
| 853 | 634 void |
| 635 event_stream_create_io_streams (void *inhandle, void *outhandle, | |
| 636 void *errhandle, Lisp_Object *instream, | |
| 637 Lisp_Object *outstream, | |
| 638 Lisp_Object *errstream, | |
| 639 USID *in_usid, | |
| 640 USID *err_usid, | |
| 641 int flags) | |
| 428 | 642 { |
| 1268 | 643 check_event_stream_ok (); |
| 853 | 644 event_stream->create_io_streams_cb |
| 645 (inhandle, outhandle, errhandle, instream, outstream, errstream, | |
| 646 in_usid, err_usid, flags); | |
| 428 | 647 } |
| 648 | |
| 853 | 649 void |
| 650 event_stream_delete_io_streams (Lisp_Object instream, | |
| 651 Lisp_Object outstream, | |
| 652 Lisp_Object errstream, | |
| 653 USID *in_usid, | |
| 654 USID *err_usid) | |
| 428 | 655 { |
| 1268 | 656 check_event_stream_ok (); |
| 853 | 657 event_stream->delete_io_streams_cb (instream, outstream, errstream, |
| 658 in_usid, err_usid); | |
| 428 | 659 } |
| 660 | |
| 442 | 661 static int |
| 662 event_stream_current_event_timestamp (struct console *c) | |
| 663 { | |
| 664 if (event_stream && event_stream->current_event_timestamp_cb) | |
| 665 return event_stream->current_event_timestamp_cb (c); | |
| 666 else | |
| 667 return 0; | |
| 668 } | |
| 428 | 669 |
| 670 | |
| 671 /**********************************************************************/ | |
| 672 /* Character prompting */ | |
| 673 /**********************************************************************/ | |
| 674 | |
| 675 static void | |
| 676 echo_key_event (struct command_builder *command_builder, | |
| 677 Lisp_Object event) | |
| 678 { | |
| 679 /* This function can GC */ | |
| 793 | 680 DECLARE_EISTRING_MALLOC (buf); |
| 428 | 681 Bytecount buf_index = command_builder->echo_buf_index; |
| 867 | 682 Ibyte *e; |
| 428 | 683 Bytecount len; |
| 684 | |
| 685 if (buf_index < 0) | |
| 686 { | |
| 687 buf_index = 0; /* We're echoing now */ | |
| 688 clear_echo_area (selected_frame (), Qnil, 0); | |
| 689 } | |
| 690 | |
| 934 | 691 format_event_object (buf, event, 1); |
| 793 | 692 len = eilen (buf); |
| 428 | 693 |
| 694 if (len + buf_index + 4 > command_builder->echo_buf_length) | |
| 793 | 695 { |
| 696 eifree (buf); | |
| 697 return; | |
| 698 } | |
| 428 | 699 e = command_builder->echo_buf + buf_index; |
| 793 | 700 memcpy (e, eidata (buf), len); |
| 428 | 701 e += len; |
| 793 | 702 eifree (buf); |
| 428 | 703 |
| 704 e[0] = ' '; | |
| 705 e[1] = '-'; | |
| 706 e[2] = ' '; | |
| 707 e[3] = 0; | |
| 708 | |
| 709 command_builder->echo_buf_index = buf_index + len + 1; | |
| 710 } | |
| 711 | |
| 712 static void | |
| 713 regenerate_echo_keys_from_this_command_keys (struct command_builder * | |
| 714 builder) | |
| 715 { | |
| 716 Lisp_Object event; | |
| 717 | |
| 718 builder->echo_buf_index = 0; | |
| 719 | |
| 720 EVENT_CHAIN_LOOP (event, Vthis_command_keys) | |
| 721 echo_key_event (builder, event); | |
| 722 } | |
| 723 | |
| 724 static void | |
| 725 maybe_echo_keys (struct command_builder *command_builder, int no_snooze) | |
| 726 { | |
| 727 /* This function can GC */ | |
| 728 double echo_keystrokes; | |
| 729 struct frame *f = selected_frame (); | |
| 853 | 730 int depth = begin_dont_check_for_quit (); |
| 731 | |
| 428 | 732 /* Message turns off echoing unless more keystrokes turn it on again. */ |
| 733 if (echo_area_active (f) && !EQ (Qcommand, echo_area_status (f))) | |
| 853 | 734 goto done; |
| 428 | 735 |
| 736 if (INTP (Vecho_keystrokes) || FLOATP (Vecho_keystrokes)) | |
| 737 echo_keystrokes = extract_float (Vecho_keystrokes); | |
| 738 else | |
| 739 echo_keystrokes = 0; | |
| 740 | |
| 741 if (minibuf_level == 0 | |
| 742 && echo_keystrokes > 0.0 | |
| 442 | 743 #if defined (HAVE_X_WINDOWS) && defined (LWLIB_MENUBARS_LUCID) |
| 744 && !x_kludge_lw_menu_active () | |
| 745 #endif | |
| 746 ) | |
| 428 | 747 { |
| 748 if (!no_snooze) | |
| 749 { | |
| 750 if (NILP (Fsit_for (Vecho_keystrokes, Qnil))) | |
| 751 /* input came in, so don't echo. */ | |
| 853 | 752 goto done; |
| 428 | 753 } |
| 754 | |
| 755 echo_area_message (f, command_builder->echo_buf, Qnil, 0, | |
| 756 /* not echo_buf_index. That doesn't include | |
| 757 the terminating " - ". */ | |
| 758 strlen ((char *) command_builder->echo_buf), | |
| 759 Qcommand); | |
| 760 } | |
| 853 | 761 |
| 762 done: | |
| 763 Vquit_flag = Qnil; /* see begin_dont_check_for_quit() */ | |
| 764 unbind_to (depth); | |
| 428 | 765 } |
| 766 | |
| 767 static void | |
| 768 reset_key_echo (struct command_builder *command_builder, | |
| 769 int remove_echo_area_echo) | |
| 770 { | |
| 771 /* This function can GC */ | |
| 772 struct frame *f = selected_frame (); | |
| 773 | |
| 757 | 774 if (command_builder) |
| 775 command_builder->echo_buf_index = -1; | |
| 428 | 776 |
| 777 if (remove_echo_area_echo) | |
| 778 clear_echo_area (f, Qcommand, 0); | |
| 779 } | |
| 780 | |
| 781 | |
| 782 /**********************************************************************/ | |
| 783 /* random junk */ | |
| 784 /**********************************************************************/ | |
| 785 | |
| 786 /* NB: The following auto-save stuff is in keyboard.c in FSFmacs, and | |
| 787 keystrokes_since_auto_save is equivalent to the difference between | |
| 788 num_nonmacro_input_chars and last_auto_save. */ | |
| 789 | |
| 444 | 790 /* When an auto-save happens, record the number of keystrokes, and |
| 791 don't do again soon. */ | |
| 428 | 792 |
| 793 void | |
| 794 record_auto_save (void) | |
| 795 { | |
| 796 keystrokes_since_auto_save = 0; | |
| 797 } | |
| 798 | |
| 799 /* Make an auto save happen as soon as possible at command level. */ | |
| 800 | |
| 801 void | |
| 802 force_auto_save_soon (void) | |
| 803 { | |
| 804 keystrokes_since_auto_save = 1 + max (auto_save_interval, 20); | |
| 805 } | |
| 806 | |
| 807 static void | |
| 808 maybe_do_auto_save (void) | |
| 809 { | |
| 810 /* This function can call lisp */ | |
| 811 keystrokes_since_auto_save++; | |
| 812 if (auto_save_interval > 0 && | |
| 813 keystrokes_since_auto_save > max (auto_save_interval, 20) && | |
| 1268 | 814 !detect_input_pending (1)) |
| 428 | 815 { |
| 816 Fdo_auto_save (Qnil, Qnil); | |
| 817 record_auto_save (); | |
| 818 } | |
| 819 } | |
| 820 | |
| 821 static Lisp_Object | |
| 822 print_help (Lisp_Object object) | |
| 823 { | |
| 824 Fprinc (object, Qnil); | |
| 825 return Qnil; | |
| 826 } | |
| 827 | |
| 828 static void | |
| 829 execute_help_form (struct command_builder *command_builder, | |
| 830 Lisp_Object event) | |
| 831 { | |
| 832 /* This function can GC */ | |
| 833 Lisp_Object help = Qnil; | |
| 834 int speccount = specpdl_depth (); | |
| 835 Bytecount buf_index = command_builder->echo_buf_index; | |
| 836 Lisp_Object echo = ((buf_index <= 0) | |
| 837 ? Qnil | |
| 838 : make_string (command_builder->echo_buf, | |
| 839 buf_index)); | |
| 840 struct gcpro gcpro1, gcpro2; | |
| 841 GCPRO2 (echo, help); | |
| 842 | |
|
4775
1d61580e0cf7
Remove Fsave_window_excursion from window.c, it's overridden by Lisp.
Aidan Kehoe <kehoea@parhasard.net>
parents:
4718
diff
changeset
|
843 record_unwind_protect (Feval, |
|
1d61580e0cf7
Remove Fsave_window_excursion from window.c, it's overridden by Lisp.
Aidan Kehoe <kehoea@parhasard.net>
parents:
4718
diff
changeset
|
844 list2 (Qset_window_configuration, |
|
1d61580e0cf7
Remove Fsave_window_excursion from window.c, it's overridden by Lisp.
Aidan Kehoe <kehoea@parhasard.net>
parents:
4718
diff
changeset
|
845 call0 (Qcurrent_window_configuration))); |
| 428 | 846 reset_key_echo (command_builder, 1); |
| 847 | |
|
4677
8f1ee2d15784
Support full Common Lisp multiple values in C.
Aidan Kehoe <kehoea@parhasard.net>
parents:
4528
diff
changeset
|
848 help = IGNORE_MULTIPLE_VALUES (Feval (Vhelp_form)); |
| 428 | 849 if (STRINGP (help)) |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
850 internal_with_output_to_temp_buffer (build_ascstring ("*Help*"), |
| 428 | 851 print_help, help, Qnil); |
| 852 Fnext_command_event (event, Qnil); | |
| 853 /* Remove the help from the frame */ | |
| 771 | 854 unbind_to (speccount); |
| 428 | 855 /* Hmmmm. Tricky. The unbind restores an old window configuration, |
| 856 apparently bypassing any setting of windows_structure_changed. | |
| 857 So we need to set it so that things get redrawn properly. */ | |
| 858 /* #### This is massive overkill. Look at doing it better once the | |
| 859 new redisplay is fully in place. */ | |
| 860 { | |
| 861 Lisp_Object frmcons, devcons, concons; | |
| 862 FRAME_LOOP_NO_BREAK (frmcons, devcons, concons) | |
| 863 { | |
| 864 struct frame *f = XFRAME (XCAR (frmcons)); | |
| 865 MARK_FRAME_WINDOWS_STRUCTURE_CHANGED (f); | |
| 866 } | |
| 867 } | |
| 868 | |
| 869 redisplay (); | |
| 1204 | 870 if (event_matches_key_specifier_p (event, make_char (' '))) |
| 428 | 871 { |
| 872 /* Discard next key if it is a space */ | |
| 873 reset_key_echo (command_builder, 1); | |
| 874 Fnext_command_event (event, Qnil); | |
| 875 } | |
| 876 | |
| 877 command_builder->echo_buf_index = buf_index; | |
| 878 if (buf_index > 0) | |
| 879 memcpy (command_builder->echo_buf, | |
| 880 XSTRING_DATA (echo), buf_index + 1); /* terminating 0 */ | |
| 881 UNGCPRO; | |
| 882 } | |
| 883 | |
| 884 | |
| 885 /**********************************************************************/ | |
| 886 /* timeouts */ | |
| 887 /**********************************************************************/ | |
| 888 | |
| 593 | 889 /* NOTE: "Low-level" or "interval" timeouts are one-shot timeouts that |
| 890 measure single intervals. "High-level timeouts" or "wakeups" are | |
| 891 the objects generated by `add-timeout' or `add-async-timout' -- | |
| 892 they can fire repeatedly (and in fact can have a different initial | |
| 893 time and resignal time). Given the nature of both setitimer() and | |
| 894 select() -- i.e. all we get is a single one-shot timer -- we have | |
| 895 to decompose all high-level timeouts into a series of intervals or | |
| 896 low-level timeouts. | |
| 897 | |
| 898 Low-level timeouts are of two varieties: synchronous and asynchronous. | |
| 899 The former are handled at the window-system level, the latter in | |
| 900 signal.c. | |
| 901 */ | |
| 902 | |
| 903 /**** Low-level timeout helper functions. **** | |
| 428 | 904 |
| 905 These functions maintain a sorted list of one-shot timeouts (where | |
| 593 | 906 the timeouts are in absolute time so we never lose any time as a |
| 907 result of the delay between noting an interval and firing the next | |
| 908 one). They are intended for use by functions that need to convert | |
| 909 a list of absolute timeouts into a series of intervals to wait | |
| 910 for. */ | |
| 428 | 911 |
| 912 /* We ensure that 0 is never a valid ID, so that a value of 0 can be | |
| 913 used to indicate an absence of a timer. */ | |
| 914 static int low_level_timeout_id_tick; | |
| 915 | |
| 916 static struct low_level_timeout_blocktype | |
| 917 { | |
| 918 Blocktype_declare (struct low_level_timeout); | |
| 919 } *the_low_level_timeout_blocktype; | |
| 920 | |
| 921 /* Add a one-shot timeout at time TIME to TIMEOUT_LIST. Return | |
| 922 a unique ID identifying the timeout. */ | |
| 923 | |
| 924 int | |
| 925 add_low_level_timeout (struct low_level_timeout **timeout_list, | |
| 926 EMACS_TIME thyme) | |
| 927 { | |
| 928 struct low_level_timeout *tm; | |
| 929 struct low_level_timeout *t, **tt; | |
| 930 | |
| 931 /* Allocate a new time struct. */ | |
| 932 | |
| 933 tm = Blocktype_alloc (the_low_level_timeout_blocktype); | |
| 934 tm->next = NULL; | |
| 593 | 935 /* Don't just use ++low_level_timeout_id_tick, for the (admittedly |
| 936 rare) case in which numbers wrap around. */ | |
| 428 | 937 if (low_level_timeout_id_tick == 0) |
| 938 low_level_timeout_id_tick++; | |
| 939 tm->id = low_level_timeout_id_tick++; | |
| 940 tm->time = thyme; | |
| 941 | |
| 942 /* Add it to the queue. */ | |
| 943 | |
| 944 tt = timeout_list; | |
| 945 t = *tt; | |
| 946 while (t && EMACS_TIME_EQUAL_OR_GREATER (tm->time, t->time)) | |
| 947 { | |
| 948 tt = &t->next; | |
| 949 t = *tt; | |
| 950 } | |
| 951 tm->next = t; | |
| 952 *tt = tm; | |
| 953 | |
| 954 return tm->id; | |
| 955 } | |
| 956 | |
| 957 /* Remove the low-level timeout identified by ID from TIMEOUT_LIST. | |
| 958 If the timeout is not there, do nothing. */ | |
| 959 | |
| 960 void | |
| 961 remove_low_level_timeout (struct low_level_timeout **timeout_list, int id) | |
| 962 { | |
| 963 struct low_level_timeout *t, *prev; | |
| 964 | |
| 965 /* find it */ | |
| 966 | |
| 967 for (t = *timeout_list, prev = NULL; t && t->id != id; t = t->next) | |
| 968 prev = t; | |
| 969 | |
| 970 if (!t) | |
| 971 return; /* couldn't find it */ | |
| 972 | |
| 973 if (!prev) | |
| 974 *timeout_list = t->next; | |
| 975 else prev->next = t->next; | |
| 976 | |
| 977 Blocktype_free (the_low_level_timeout_blocktype, t); | |
| 978 } | |
| 979 | |
| 980 /* If there are timeouts on TIMEOUT_LIST, store the relative time | |
| 981 interval to the first timeout on the list into INTERVAL and | |
| 982 return 1. Otherwise, return 0. */ | |
| 983 | |
| 984 int | |
| 985 get_low_level_timeout_interval (struct low_level_timeout *timeout_list, | |
| 986 EMACS_TIME *interval) | |
| 987 { | |
| 988 if (!timeout_list) /* no timer events; block indefinitely */ | |
| 989 return 0; | |
| 990 else | |
| 991 { | |
| 992 EMACS_TIME current_time; | |
| 993 | |
| 994 /* The time to block is the difference between the first | |
| 995 (earliest) timer on the queue and the current time. | |
| 996 If that is negative, then the timer will fire immediately | |
| 997 but we still have to call select(), with a zero-valued | |
| 998 timeout: user events must have precedence over timer events. */ | |
| 999 EMACS_GET_TIME (current_time); | |
| 1000 if (EMACS_TIME_GREATER (timeout_list->time, current_time)) | |
| 1001 EMACS_SUB_TIME (*interval, timeout_list->time, | |
| 1002 current_time); | |
| 1003 else | |
| 1004 EMACS_SET_SECS_USECS (*interval, 0, 0); | |
| 1005 return 1; | |
| 1006 } | |
| 1007 } | |
| 1008 | |
| 1009 /* Pop the first (i.e. soonest) timeout off of TIMEOUT_LIST and return | |
| 1010 its ID. Also, if TIME_OUT is not 0, store the absolute time of the | |
| 1011 timeout into TIME_OUT. */ | |
| 1012 | |
| 1013 int | |
| 1014 pop_low_level_timeout (struct low_level_timeout **timeout_list, | |
| 1015 EMACS_TIME *time_out) | |
| 1016 { | |
| 1017 struct low_level_timeout *tm = *timeout_list; | |
| 1018 int id; | |
| 1019 | |
| 1020 assert (tm); | |
| 1021 id = tm->id; | |
| 1022 if (time_out) | |
| 1023 *time_out = tm->time; | |
| 1024 *timeout_list = tm->next; | |
| 1025 Blocktype_free (the_low_level_timeout_blocktype, tm); | |
| 1026 return id; | |
| 1027 } | |
| 1028 | |
| 1029 | |
| 593 | 1030 /**** High-level timeout functions. **** */ |
| 1031 | |
| 1032 /* We ensure that 0 is never a valid ID, so that a value of 0 can be | |
| 1033 used to indicate an absence of a timer. */ | |
| 428 | 1034 static int timeout_id_tick; |
| 1035 | |
| 1036 static Lisp_Object pending_timeout_list, pending_async_timeout_list; | |
| 1037 | |
| 3263 | 1038 #ifndef NEW_GC |
| 428 | 1039 static Lisp_Object Vtimeout_free_list; |
| 3263 | 1040 #endif /* not NEW_GC */ |
| 428 | 1041 |
| 1042 static Lisp_Object | |
| 1043 mark_timeout (Lisp_Object obj) | |
| 1044 { | |
| 440 | 1045 Lisp_Timeout *tm = XTIMEOUT (obj); |
| 428 | 1046 mark_object (tm->function); |
| 1047 return tm->object; | |
| 1048 } | |
| 1049 | |
| 1204 | 1050 static const struct memory_description timeout_description[] = { |
| 440 | 1051 { XD_LISP_OBJECT, offsetof (Lisp_Timeout, function) }, |
| 1052 { XD_LISP_OBJECT, offsetof (Lisp_Timeout, object) }, | |
| 428 | 1053 { XD_END } |
| 1054 }; | |
| 1055 | |
| 934 | 1056 DEFINE_LRECORD_IMPLEMENTATION ("timeout", timeout, |
| 1057 1, /*dumpable-flag*/ | |
| 1058 mark_timeout, internal_object_printer, | |
| 1059 0, 0, 0, timeout_description, Lisp_Timeout); | |
| 428 | 1060 |
| 1061 /* Generate a timeout and return its ID. */ | |
| 1062 | |
| 1063 int | |
| 1064 event_stream_generate_wakeup (unsigned int milliseconds, | |
| 1065 unsigned int vanilliseconds, | |
| 1066 Lisp_Object function, Lisp_Object object, | |
| 1067 int async_p) | |
| 1068 { | |
| 3263 | 1069 #ifdef NEW_GC |
| 2720 | 1070 Lisp_Object op = |
| 1071 wrap_pointer_1 (alloc_lrecord_type (Lisp_Timeout, &lrecord_timeout)); | |
| 3263 | 1072 #else /* not NEW_GC */ |
| 1204 | 1073 Lisp_Object op = alloc_managed_lcrecord (Vtimeout_free_list); |
| 3263 | 1074 #endif /* not NEW_GC */ |
| 440 | 1075 Lisp_Timeout *timeout = XTIMEOUT (op); |
| 428 | 1076 EMACS_TIME current_time; |
| 1077 EMACS_TIME interval; | |
| 1078 | |
| 593 | 1079 /* Don't just use ++timeout_id_tick, for the (admittedly rare) case |
| 1080 in which numbers wrap around. */ | |
| 1081 if (timeout_id_tick == 0) | |
| 1082 timeout_id_tick++; | |
| 428 | 1083 timeout->id = timeout_id_tick++; |
| 1084 timeout->resignal_msecs = vanilliseconds; | |
| 1085 timeout->function = function; | |
| 1086 timeout->object = object; | |
| 1087 | |
| 1088 EMACS_GET_TIME (current_time); | |
| 1089 EMACS_SET_SECS_USECS (interval, milliseconds / 1000, | |
| 1090 1000 * (milliseconds % 1000)); | |
| 1091 EMACS_ADD_TIME (timeout->next_signal_time, current_time, interval); | |
| 1092 | |
| 1093 if (async_p) | |
| 1094 { | |
| 1095 timeout->interval_id = | |
| 593 | 1096 signal_add_async_interval_timeout (timeout->next_signal_time); |
| 1097 pending_async_timeout_list = | |
| 1098 noseeum_cons (op, pending_async_timeout_list); | |
| 428 | 1099 } |
| 1100 else | |
| 1101 { | |
| 1102 timeout->interval_id = | |
| 1103 event_stream_add_timeout (timeout->next_signal_time); | |
| 1104 pending_timeout_list = noseeum_cons (op, pending_timeout_list); | |
| 1105 } | |
| 1106 return timeout->id; | |
| 1107 } | |
| 1108 | |
| 1109 /* Given the INTERVAL-ID of a timeout just signalled, resignal the timeout | |
| 1110 as necessary and return the timeout's ID and function and object slots. | |
| 1111 | |
| 1112 This should be called as a result of receiving notice that a timeout | |
| 1113 has fired. INTERVAL-ID is *not* the timeout's ID, but is the ID that | |
| 1114 identifies this particular firing of the timeout. INTERVAL-ID's and | |
| 1115 timeout ID's are in separate number spaces and bear no relation to | |
| 1116 each other. The INTERVAL-ID is all that the event callback routines | |
| 1117 work with: they work only with one-shot intervals, not with timeouts | |
| 1118 that may fire repeatedly. | |
| 1119 | |
| 1120 NOTE: The returned FUNCTION and OBJECT are *not* GC-protected at all. | |
| 1121 */ | |
| 1122 | |
| 593 | 1123 int |
| 428 | 1124 event_stream_resignal_wakeup (int interval_id, int async_p, |
| 1125 Lisp_Object *function, Lisp_Object *object) | |
| 1126 { | |
| 1127 Lisp_Object op = Qnil, rest; | |
| 440 | 1128 Lisp_Timeout *timeout; |
| 428 | 1129 Lisp_Object *timeout_list; |
| 1130 struct gcpro gcpro1; | |
| 1131 int id; | |
| 1132 | |
| 1133 GCPRO1 (op); /* just in case ... because it's removed from the list | |
| 1134 for awhile. */ | |
| 1135 | |
| 1136 timeout_list = async_p ? &pending_async_timeout_list : &pending_timeout_list; | |
| 1137 | |
| 1138 /* Find the timeout on the list of pending ones. */ | |
| 1139 LIST_LOOP (rest, *timeout_list) | |
| 1140 { | |
| 1141 timeout = XTIMEOUT (XCAR (rest)); | |
| 1142 if (timeout->interval_id == interval_id) | |
| 1143 break; | |
| 1144 } | |
| 1145 | |
| 1146 assert (!NILP (rest)); | |
| 1147 op = XCAR (rest); | |
| 1148 timeout = XTIMEOUT (op); | |
| 1149 /* We make sure to snarf the data out of the timeout object before | |
| 1150 we free it with free_managed_lcrecord(). */ | |
| 1151 id = timeout->id; | |
| 1152 *function = timeout->function; | |
| 1153 *object = timeout->object; | |
| 1154 | |
| 1155 /* Remove this one from the list of pending timeouts */ | |
| 1156 *timeout_list = delq_no_quit_and_free_cons (op, *timeout_list); | |
| 1157 | |
| 1158 /* If this timeout wants to be resignalled, do it now. */ | |
| 1159 if (timeout->resignal_msecs) | |
| 1160 { | |
| 1161 EMACS_TIME current_time; | |
| 1162 EMACS_TIME interval; | |
| 1163 | |
| 1164 /* Determine the time that the next resignalling should occur. | |
| 1165 We do that by adding the interval time to the last signalled | |
| 1166 time until we get a time that's current. | |
| 1167 | |
| 1168 (This way, it doesn't matter if the timeout was signalled | |
| 1169 exactly when we asked for it, or at some time later.) | |
| 1170 */ | |
| 1171 EMACS_GET_TIME (current_time); | |
| 1172 EMACS_SET_SECS_USECS (interval, timeout->resignal_msecs / 1000, | |
| 1173 1000 * (timeout->resignal_msecs % 1000)); | |
| 1174 do | |
| 1175 { | |
| 1176 EMACS_ADD_TIME (timeout->next_signal_time, timeout->next_signal_time, | |
| 1177 interval); | |
| 1178 } while (EMACS_TIME_GREATER (current_time, timeout->next_signal_time)); | |
| 1179 | |
| 1180 if (async_p) | |
| 1181 timeout->interval_id = | |
| 593 | 1182 signal_add_async_interval_timeout (timeout->next_signal_time); |
| 428 | 1183 else |
| 1184 timeout->interval_id = | |
| 1185 event_stream_add_timeout (timeout->next_signal_time); | |
| 1186 /* Add back onto the list. Note that the effect of this | |
| 1187 is to move frequently-hit timeouts to the front of the | |
| 1188 list, which is a good thing. */ | |
| 1189 *timeout_list = noseeum_cons (op, *timeout_list); | |
| 1190 } | |
| 1191 else | |
| 3263 | 1192 #ifdef NEW_GC |
| 2720 | 1193 free_lrecord (op); |
| 3263 | 1194 #else /* not NEW_GC */ |
| 428 | 1195 free_managed_lcrecord (Vtimeout_free_list, op); |
| 3263 | 1196 #endif /* not NEW_GC */ |
| 428 | 1197 |
| 1198 UNGCPRO; | |
| 1199 return id; | |
| 1200 } | |
| 1201 | |
| 1202 void | |
| 1203 event_stream_disable_wakeup (int id, int async_p) | |
| 1204 { | |
| 440 | 1205 Lisp_Timeout *timeout = 0; |
| 428 | 1206 Lisp_Object rest; |
| 1207 Lisp_Object *timeout_list; | |
| 1208 | |
| 1209 if (async_p) | |
| 1210 timeout_list = &pending_async_timeout_list; | |
| 1211 else | |
| 1212 timeout_list = &pending_timeout_list; | |
| 1213 | |
| 1214 /* Find the timeout on the list of pending ones, if it's still there. */ | |
| 1215 LIST_LOOP (rest, *timeout_list) | |
| 1216 { | |
| 1217 timeout = XTIMEOUT (XCAR (rest)); | |
| 1218 if (timeout->id == id) | |
| 1219 break; | |
| 1220 } | |
| 1221 | |
| 1222 /* If we found it, remove it from the list and disable the pending | |
| 1223 one-shot. */ | |
| 1224 if (!NILP (rest)) | |
| 1225 { | |
| 1226 Lisp_Object op = XCAR (rest); | |
| 1227 *timeout_list = | |
| 1228 delq_no_quit_and_free_cons (op, *timeout_list); | |
| 1229 if (async_p) | |
| 593 | 1230 signal_remove_async_interval_timeout (timeout->interval_id); |
| 428 | 1231 else |
| 1232 event_stream_remove_timeout (timeout->interval_id); | |
| 3263 | 1233 #ifdef NEW_GC |
| 2720 | 1234 free_lrecord (op); |
| 3263 | 1235 #else /* not NEW_GC */ |
| 428 | 1236 free_managed_lcrecord (Vtimeout_free_list, op); |
| 3263 | 1237 #endif /* not NEW_GC */ |
| 428 | 1238 } |
| 1239 } | |
| 1240 | |
| 1241 static int | |
| 1242 event_stream_wakeup_pending_p (int id, int async_p) | |
| 1243 { | |
| 440 | 1244 Lisp_Timeout *timeout; |
| 428 | 1245 Lisp_Object rest; |
| 1246 Lisp_Object timeout_list; | |
| 1247 int found = 0; | |
| 1248 | |
| 1249 | |
| 1250 if (async_p) | |
| 1251 timeout_list = pending_async_timeout_list; | |
| 1252 else | |
| 1253 timeout_list = pending_timeout_list; | |
| 1254 | |
| 1255 /* Find the element on the list of pending ones, if it's still there. */ | |
| 1256 LIST_LOOP (rest, timeout_list) | |
| 1257 { | |
| 1258 timeout = XTIMEOUT (XCAR (rest)); | |
| 1259 if (timeout->id == id) | |
| 1260 { | |
| 1261 found = 1; | |
| 1262 break; | |
| 1263 } | |
| 1264 } | |
| 1265 | |
| 1266 return found; | |
| 1267 } | |
| 1268 | |
| 1269 | |
| 1270 /**** Lisp-level timeout functions. ****/ | |
| 1271 | |
| 1272 static unsigned long | |
| 1273 lisp_number_to_milliseconds (Lisp_Object secs, int allow_0) | |
| 1274 { | |
| 1275 double fsecs; | |
| 1276 CHECK_INT_OR_FLOAT (secs); | |
| 1277 fsecs = XFLOATINT (secs); | |
| 1278 if (fsecs < 0) | |
| 563 | 1279 invalid_argument ("timeout is negative", secs); |
| 428 | 1280 if (!allow_0 && fsecs == 0) |
| 563 | 1281 invalid_argument ("timeout is non-positive", secs); |
| 428 | 1282 if (fsecs >= (((unsigned int) 0xFFFFFFFF) / 1000)) |
| 563 | 1283 invalid_argument |
| 428 | 1284 ("timeout would exceed 32 bits when represented in milliseconds", secs); |
| 1285 | |
| 1286 return (unsigned long) (1000 * fsecs); | |
| 1287 } | |
| 1288 | |
| 1289 DEFUN ("add-timeout", Fadd_timeout, 3, 4, 0, /* | |
| 1290 Add a timeout, to be signaled after the timeout period has elapsed. | |
| 1291 SECS is a number of seconds, expressed as an integer or a float. | |
| 1292 FUNCTION will be called after that many seconds have elapsed, with one | |
| 1293 argument, the given OBJECT. If the optional RESIGNAL argument is provided, | |
| 1294 then after this timeout expires, `add-timeout' will automatically be called | |
| 1295 again with RESIGNAL as the first argument. | |
| 1296 | |
| 1297 This function returns an object which is the id number of this particular | |
| 1298 timeout. You can pass that object to `disable-timeout' to turn off the | |
| 1299 timeout before it has been signalled. | |
| 1300 | |
| 1301 NOTE: Id numbers as returned by this function are in a distinct namespace | |
| 1302 from those returned by `add-async-timeout'. This means that the same id | |
| 1303 number could refer to a pending synchronous timeout and a different pending | |
| 1304 asynchronous timeout, and that you cannot pass an id from `add-timeout' | |
| 1305 to `disable-async-timeout', or vice-versa. | |
| 1306 | |
| 1307 The number of seconds may be expressed as a floating-point number, in which | |
| 1308 case some fractional part of a second will be used. Caveat: the usable | |
| 1309 timeout granularity will vary from system to system. | |
| 1310 | |
| 1311 Adding a timeout causes a timeout event to be returned by `next-event', and | |
| 1312 the function will be invoked by `dispatch-event,' so if emacs is in a tight | |
| 1313 loop, the function will not be invoked until the next call to sit-for or | |
| 1314 until the return to top-level (the same is true of process filters). | |
| 1315 | |
| 1316 If you need to have a timeout executed even when XEmacs is in the midst of | |
| 1317 running Lisp code, use `add-async-timeout'. | |
| 1318 | |
| 1319 WARNING: if you are thinking of calling add-timeout from inside of a | |
| 1320 callback function as a way of resignalling a timeout, think again. There | |
| 1321 is a race condition. That's why the RESIGNAL argument exists. | |
| 1322 */ | |
| 1323 (secs, function, object, resignal)) | |
| 1324 { | |
| 1325 unsigned long msecs = lisp_number_to_milliseconds (secs, 0); | |
| 1326 unsigned long msecs2 = (NILP (resignal) ? 0 : | |
| 1327 lisp_number_to_milliseconds (resignal, 0)); | |
| 1328 int id; | |
| 1329 Lisp_Object lid; | |
| 1330 id = event_stream_generate_wakeup (msecs, msecs2, function, object, 0); | |
| 1331 lid = make_int (id); | |
| 2500 | 1332 if (id != XINT (lid)) ABORT (); |
| 428 | 1333 return lid; |
| 1334 } | |
| 1335 | |
| 1336 DEFUN ("disable-timeout", Fdisable_timeout, 1, 1, 0, /* | |
| 1337 Disable a timeout from signalling any more. | |
| 1338 ID should be a timeout id number as returned by `add-timeout'. If ID | |
| 1339 corresponds to a one-shot timeout that has already signalled, nothing | |
| 1340 will happen. | |
| 1341 | |
| 1342 It will not work to call this function on an id number returned by | |
| 1343 `add-async-timeout'. Use `disable-async-timeout' for that. | |
| 1344 */ | |
| 1345 (id)) | |
| 1346 { | |
| 1347 CHECK_INT (id); | |
| 1348 event_stream_disable_wakeup (XINT (id), 0); | |
| 1349 return Qnil; | |
| 1350 } | |
| 1351 | |
| 1352 DEFUN ("add-async-timeout", Fadd_async_timeout, 3, 4, 0, /* | |
| 1353 Add an asynchronous timeout, to be signaled after an interval has elapsed. | |
| 1354 SECS is a number of seconds, expressed as an integer or a float. | |
| 1355 FUNCTION will be called after that many seconds have elapsed, with one | |
| 1356 argument, the given OBJECT. If the optional RESIGNAL argument is provided, | |
| 1357 then after this timeout expires, `add-async-timeout' will automatically be | |
| 1358 called again with RESIGNAL as the first argument. | |
| 1359 | |
| 1360 This function returns an object which is the id number of this particular | |
| 1361 timeout. You can pass that object to `disable-async-timeout' to turn off | |
| 1362 the timeout before it has been signalled. | |
| 1363 | |
| 1364 NOTE: Id numbers as returned by this function are in a distinct namespace | |
| 1365 from those returned by `add-timeout'. This means that the same id number | |
| 1366 could refer to a pending synchronous timeout and a different pending | |
| 1367 asynchronous timeout, and that you cannot pass an id from | |
| 1368 `add-async-timeout' to `disable-timeout', or vice-versa. | |
| 1369 | |
| 1370 The number of seconds may be expressed as a floating-point number, in which | |
| 1371 case some fractional part of a second will be used. Caveat: the usable | |
| 1372 timeout granularity will vary from system to system. | |
| 1373 | |
| 1374 Adding an asynchronous timeout causes the function to be invoked as soon | |
| 1375 as the timeout occurs, even if XEmacs is in the midst of executing some | |
| 1376 other code. (This is unlike the synchronous timeouts added with | |
| 1377 `add-timeout', where the timeout will only be signalled when XEmacs is | |
| 1378 waiting for events, i.e. the next return to top-level or invocation of | |
| 1379 `sit-for' or related functions.) This means that the function that is | |
| 1380 called *must* not signal an error or change any global state (e.g. switch | |
| 1381 buffers or windows) except when locking code is in place to make sure | |
| 1382 that race conditions don't occur in the interaction between the | |
| 1383 asynchronous timeout function and other code. | |
| 1384 | |
| 1385 Under most circumstances, you should use `add-timeout' instead, as it is | |
| 1386 much safer. Asynchronous timeouts should only be used when such behavior | |
| 1387 is really necessary. | |
| 1388 | |
| 1389 Asynchronous timeouts are blocked and will not occur when `inhibit-quit' | |
| 1390 is non-nil. As soon as `inhibit-quit' becomes nil again, any pending | |
| 1391 asynchronous timeouts will get called immediately. (Multiple occurrences | |
| 1392 of the same asynchronous timeout are not queued, however.) While the | |
| 1393 callback function of an asynchronous timeout is invoked, `inhibit-quit' | |
| 1394 is automatically bound to non-nil, and thus other asynchronous timeouts | |
| 1395 will be blocked unless the callback function explicitly sets `inhibit-quit' | |
| 1396 to nil. | |
| 1397 | |
| 1398 WARNING: if you are thinking of calling `add-async-timeout' from inside of a | |
| 1399 callback function as a way of resignalling a timeout, think again. There | |
| 1400 is a race condition. That's why the RESIGNAL argument exists. | |
| 1401 */ | |
| 1402 (secs, function, object, resignal)) | |
| 1403 { | |
| 1404 unsigned long msecs = lisp_number_to_milliseconds (secs, 0); | |
| 1405 unsigned long msecs2 = (NILP (resignal) ? 0 : | |
| 1406 lisp_number_to_milliseconds (resignal, 0)); | |
| 1407 int id; | |
| 1408 Lisp_Object lid; | |
| 1409 id = event_stream_generate_wakeup (msecs, msecs2, function, object, 1); | |
| 1410 lid = make_int (id); | |
| 2500 | 1411 if (id != XINT (lid)) ABORT (); |
| 428 | 1412 return lid; |
| 1413 } | |
| 1414 | |
| 1415 DEFUN ("disable-async-timeout", Fdisable_async_timeout, 1, 1, 0, /* | |
| 1416 Disable an asynchronous timeout from signalling any more. | |
| 1417 ID should be a timeout id number as returned by `add-async-timeout'. If ID | |
| 1418 corresponds to a one-shot timeout that has already signalled, nothing | |
| 1419 will happen. | |
| 1420 | |
| 1421 It will not work to call this function on an id number returned by | |
| 1422 `add-timeout'. Use `disable-timeout' for that. | |
| 1423 */ | |
| 1424 (id)) | |
| 1425 { | |
| 1426 CHECK_INT (id); | |
| 1427 event_stream_disable_wakeup (XINT (id), 1); | |
| 1428 return Qnil; | |
| 1429 } | |
| 1430 | |
| 1431 | |
| 1432 /**********************************************************************/ | |
| 1433 /* enqueuing and dequeuing events */ | |
| 1434 /**********************************************************************/ | |
| 1435 | |
| 1436 /* Add an event to the back of the command-event queue: it will be the next | |
| 1437 event read after all pending events. This only works on keyboard, | |
| 1438 mouse-click, misc-user, and eval events. | |
| 1439 */ | |
| 1440 static void | |
| 1441 enqueue_command_event (Lisp_Object event) | |
| 1442 { | |
| 1443 enqueue_event (event, &command_event_queue, &command_event_queue_tail); | |
| 1444 } | |
| 1445 | |
| 1446 static Lisp_Object | |
| 1447 dequeue_command_event (void) | |
| 1448 { | |
| 1449 return dequeue_event (&command_event_queue, &command_event_queue_tail); | |
| 1450 } | |
| 1451 | |
| 1204 | 1452 void |
| 1453 enqueue_dispatch_event (Lisp_Object event) | |
| 1454 { | |
| 1455 enqueue_event (event, &dispatch_event_queue, &dispatch_event_queue_tail); | |
| 1456 } | |
| 1457 | |
| 1458 Lisp_Object | |
| 1459 dequeue_dispatch_event (void) | |
| 1460 { | |
| 1461 return dequeue_event (&dispatch_event_queue, &dispatch_event_queue_tail); | |
| 1462 } | |
| 1463 | |
| 428 | 1464 static void |
| 1465 enqueue_command_event_1 (Lisp_Object event_to_copy) | |
| 1466 { | |
| 853 | 1467 enqueue_command_event (Fcopy_event (event_to_copy, Qnil)); |
| 428 | 1468 } |
| 1469 | |
| 1470 void | |
| 1471 enqueue_magic_eval_event (void (*fun) (Lisp_Object), Lisp_Object object) | |
| 1472 { | |
| 1473 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 934 | 1474 XSET_EVENT_TYPE (event, magic_eval_event); |
| 1475 /* channel for magic_eval events is nil */ | |
| 1204 | 1476 XSET_EVENT_MAGIC_EVAL_INTERNAL_FUNCTION (event, fun); |
| 1477 XSET_EVENT_MAGIC_EVAL_OBJECT (event, object); | |
| 428 | 1478 enqueue_command_event (event); |
| 1479 } | |
| 1480 | |
| 1481 DEFUN ("enqueue-eval-event", Fenqueue_eval_event, 2, 2, 0, /* | |
| 1482 Add an eval event to the back of the eval event queue. | |
| 1483 When this event is dispatched, FUNCTION (which should be a function | |
| 1484 of one argument) will be called with OBJECT as its argument. | |
| 1485 See `next-event' for a description of event types and how events | |
| 1486 are received. | |
| 1487 */ | |
| 1488 (function, object)) | |
| 1489 { | |
| 1490 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 1491 | |
| 934 | 1492 XSET_EVENT_TYPE (event, eval_event); |
| 1493 /* channel for eval events is nil */ | |
| 1204 | 1494 XSET_EVENT_EVAL_FUNCTION (event, function); |
| 1495 XSET_EVENT_EVAL_OBJECT (event, object); | |
| 428 | 1496 enqueue_command_event (event); |
| 1497 | |
| 1498 return event; | |
| 1499 } | |
| 1500 | |
| 1501 Lisp_Object | |
| 1502 enqueue_misc_user_event (Lisp_Object channel, Lisp_Object function, | |
| 1503 Lisp_Object object) | |
| 1504 { | |
| 1505 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 934 | 1506 XSET_EVENT_TYPE (event, misc_user_event); |
| 1507 XSET_EVENT_CHANNEL (event, channel); | |
| 1204 | 1508 XSET_EVENT_MISC_USER_FUNCTION (event, function); |
| 1509 XSET_EVENT_MISC_USER_OBJECT (event, object); | |
| 1510 XSET_EVENT_MISC_USER_BUTTON (event, 0); | |
| 1511 XSET_EVENT_MISC_USER_MODIFIERS (event, 0); | |
| 1512 XSET_EVENT_MISC_USER_X (event, -1); | |
| 1513 XSET_EVENT_MISC_USER_Y (event, -1); | |
| 428 | 1514 enqueue_command_event (event); |
| 1515 | |
| 1516 return event; | |
| 1517 } | |
| 1518 | |
| 1519 Lisp_Object | |
| 1520 enqueue_misc_user_event_pos (Lisp_Object channel, Lisp_Object function, | |
| 1521 Lisp_Object object, | |
| 1522 int button, int modifiers, int x, int y) | |
| 1523 { | |
| 1524 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 1525 | |
| 934 | 1526 XSET_EVENT_TYPE (event, misc_user_event); |
| 1527 XSET_EVENT_CHANNEL (event, channel); | |
| 1204 | 1528 XSET_EVENT_MISC_USER_FUNCTION (event, function); |
| 1529 XSET_EVENT_MISC_USER_OBJECT (event, object); | |
| 1530 XSET_EVENT_MISC_USER_BUTTON (event, button); | |
| 1531 XSET_EVENT_MISC_USER_MODIFIERS (event, modifiers); | |
| 1532 XSET_EVENT_MISC_USER_X (event, x); | |
| 1533 XSET_EVENT_MISC_USER_Y (event, y); | |
| 428 | 1534 enqueue_command_event (event); |
| 1535 | |
| 1536 return event; | |
| 1537 } | |
| 1538 | |
| 1539 | |
| 1540 /**********************************************************************/ | |
| 1541 /* focus-event handling */ | |
| 1542 /**********************************************************************/ | |
| 1543 | |
| 1544 /* | |
| 1545 | |
| 2367 | 1546 See also |
| 1547 | |
| 1548 (Info-goto-node "(internals)Focus Handling") | |
| 428 | 1549 */ |
| 1550 | |
| 2367 | 1551 |
| 428 | 1552 static void |
| 1553 run_select_frame_hook (void) | |
| 1554 { | |
| 1555 run_hook (Qselect_frame_hook); | |
| 1556 } | |
| 1557 | |
| 1558 static void | |
| 1559 run_deselect_frame_hook (void) | |
| 1560 { | |
| 1561 run_hook (Qdeselect_frame_hook); | |
| 1562 } | |
| 1563 | |
| 1564 /* When select-frame is called and focus_follows_mouse is false, we want | |
| 1565 to tell the window system that the focus should be changed to point to | |
| 1566 the new frame. However, | |
| 1567 sometimes Lisp functions will temporarily change the selected frame | |
| 1568 (e.g. to call a function that operates on the selected frame), | |
| 1569 and it's annoying if this focus-change happens exactly when | |
| 1570 select-frame is called, because then you get some flickering of the | |
| 1571 window-manager border and perhaps other undesirable results. We | |
| 1572 really only want to change the focus when we're about to retrieve | |
| 1573 an event from the user. To do this, we keep track of the frame | |
| 1574 where the window-manager focus lies on, and just before waiting | |
| 1575 for user events, check the currently selected frame and change | |
| 1576 the focus as necessary. | |
| 1577 | |
| 1578 On the other hand, if focus_follows_mouse is true, we need to switch the | |
| 1579 selected frame back to the frame with window manager focus just before we | |
| 1580 execute the next command in Fcommand_loop_1, just as the selected buffer is | |
| 1581 reverted after a set-buffer. | |
| 1582 | |
| 1583 Both cases are handled by this function. It must be called as appropriate | |
| 1584 from these two places, depending on the value of focus_follows_mouse. */ | |
| 1585 | |
| 1586 void | |
| 1587 investigate_frame_change (void) | |
| 1588 { | |
| 1589 Lisp_Object devcons, concons; | |
| 1590 | |
| 1591 /* if the selected frame was changed, change the window-system | |
| 1592 focus to the new frame. We don't do it when select-frame was | |
| 1593 called, to avoid flickering and other unwanted side effects when | |
| 1594 the frame is just changed temporarily. */ | |
| 1595 DEVICE_LOOP_NO_BREAK (devcons, concons) | |
| 1596 { | |
| 1597 struct device *d = XDEVICE (XCAR (devcons)); | |
| 1598 Lisp_Object sel_frame = DEVICE_SELECTED_FRAME (d); | |
| 1599 | |
| 1600 /* You'd think that maybe we should use FRAME_WITH_FOCUS_REAL, | |
| 1601 but that can cause us to end up in an infinite loop focusing | |
| 1602 between two frames. It seems that since the call to `select-frame' | |
| 1603 in emacs_handle_focus_change_final() is based on the _FOR_HOOKS | |
| 1604 value, we need to do so too. */ | |
| 1605 if (!NILP (sel_frame) && | |
| 1606 !EQ (DEVICE_FRAME_THAT_OUGHT_TO_HAVE_FOCUS (d), sel_frame) && | |
| 1607 !NILP (DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d)) && | |
| 1608 !EQ (DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d), sel_frame)) | |
| 1609 { | |
| 1610 /* At this point, we know that the frame has been changed. Now, if | |
| 1611 * focus_follows_mouse is not set, we finish off the frame change, | |
| 1612 * so that user events will now come from the new frame. Otherwise, | |
| 1613 * if focus_follows_mouse is set, no gratuitous frame changing | |
| 1614 * should take place. Set the focus back to the frame which was | |
| 1615 * originally selected for user input. | |
| 1616 */ | |
| 1617 if (!focus_follows_mouse) | |
| 1618 { | |
| 1619 /* prevent us from issuing the same request more than once */ | |
| 1620 DEVICE_FRAME_THAT_OUGHT_TO_HAVE_FOCUS (d) = sel_frame; | |
| 1621 MAYBE_DEVMETH (d, focus_on_frame, (XFRAME (sel_frame))); | |
| 1622 } | |
| 1623 else | |
| 1624 { | |
| 1625 Lisp_Object old_frame = Qnil; | |
| 1626 | |
| 1627 /* #### Do we really want to check OUGHT ?? | |
| 1628 * It seems to make sense, though I have never seen us | |
| 1629 * get here and have it be non-nil. | |
| 1630 */ | |
| 1631 if (FRAMEP (DEVICE_FRAME_THAT_OUGHT_TO_HAVE_FOCUS (d))) | |
| 1632 old_frame = DEVICE_FRAME_THAT_OUGHT_TO_HAVE_FOCUS (d); | |
| 1633 else if (FRAMEP (DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d))) | |
| 1634 old_frame = DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d); | |
| 1635 | |
| 1636 /* #### Can old_frame ever be NIL? play it safe.. */ | |
| 1637 if (!NILP (old_frame)) | |
| 1638 { | |
| 1639 /* Fselect_frame is not really the right thing: it frobs the | |
| 1640 * buffer stack. But there's no easy way to do the right | |
| 1641 * thing, and this code already had this problem anyway. | |
| 1642 */ | |
| 1643 Fselect_frame (old_frame); | |
| 1644 } | |
| 1645 } | |
| 1646 } | |
| 1647 } | |
| 1648 } | |
| 1649 | |
| 1650 static Lisp_Object | |
| 1651 cleanup_after_missed_defocusing (Lisp_Object frame) | |
| 1652 { | |
| 1653 if (FRAMEP (frame) && FRAME_LIVE_P (XFRAME (frame))) | |
| 1654 Fselect_frame (frame); | |
| 1655 return Qnil; | |
| 1656 } | |
| 1657 | |
| 1658 void | |
| 1659 emacs_handle_focus_change_preliminary (Lisp_Object frame_inp_and_dev) | |
| 1660 { | |
| 1661 Lisp_Object frame = Fcar (frame_inp_and_dev); | |
| 1662 Lisp_Object device = Fcar (Fcdr (frame_inp_and_dev)); | |
| 1663 int in_p = !NILP (Fcdr (Fcdr (frame_inp_and_dev))); | |
| 1664 struct device *d; | |
| 1665 | |
| 1666 if (!DEVICE_LIVE_P (XDEVICE (device))) | |
| 1667 return; | |
| 1668 else | |
| 1669 d = XDEVICE (device); | |
| 1670 | |
| 1671 /* Any received focus-change notifications render invalid any | |
| 1672 pending focus-change requests. */ | |
| 1673 DEVICE_FRAME_THAT_OUGHT_TO_HAVE_FOCUS (d) = Qnil; | |
| 1674 if (in_p) | |
| 1675 { | |
| 1676 Lisp_Object focus_frame; | |
| 1677 | |
| 1678 if (!FRAME_LIVE_P (XFRAME (frame))) | |
| 1679 return; | |
| 1680 else | |
| 1681 focus_frame = DEVICE_FRAME_WITH_FOCUS_REAL (d); | |
| 1682 | |
| 1683 /* Mark the minibuffer as changed to make sure it gets updated | |
| 1684 properly if the echo area is active. */ | |
| 1685 { | |
| 1686 struct window *w = XWINDOW (FRAME_MINIBUF_WINDOW (XFRAME (frame))); | |
| 1687 MARK_WINDOWS_CHANGED (w); | |
| 1688 } | |
| 1689 | |
| 452 | 1690 if (FRAMEP (focus_frame) && FRAME_LIVE_P (XFRAME (focus_frame)) |
| 1691 && !EQ (frame, focus_frame)) | |
| 428 | 1692 { |
| 1693 /* Oops, we missed a focus-out event. */ | |
| 1694 DEVICE_FRAME_WITH_FOCUS_REAL (d) = Qnil; | |
| 1695 redisplay_redraw_cursor (XFRAME (focus_frame), 1); | |
| 1696 } | |
| 1697 DEVICE_FRAME_WITH_FOCUS_REAL (d) = frame; | |
| 1698 if (!EQ (frame, focus_frame)) | |
| 1699 { | |
| 1700 redisplay_redraw_cursor (XFRAME (frame), 1); | |
| 1701 } | |
| 1702 } | |
| 1703 else | |
| 1704 { | |
| 1705 /* We ignore the frame reported in the event. If it's different | |
| 1706 from where we think the focus was, oh well -- we messed up. | |
| 1707 Nonetheless, we pretend we were right, for sensible behavior. */ | |
| 1708 frame = DEVICE_FRAME_WITH_FOCUS_REAL (d); | |
| 1709 if (!NILP (frame)) | |
| 1710 { | |
| 1711 DEVICE_FRAME_WITH_FOCUS_REAL (d) = Qnil; | |
| 1712 | |
| 1713 if (FRAME_LIVE_P (XFRAME (frame))) | |
| 1714 redisplay_redraw_cursor (XFRAME (frame), 1); | |
| 1715 } | |
| 1716 } | |
| 1717 } | |
| 1718 | |
| 1719 /* Called from the window-system-specific code when we receive a | |
| 1720 notification that the focus lies on a particular frame. | |
| 1721 Argument is a cons: (frame . (device . in-p)) where in-p is non-nil | |
| 1722 for focus-in. | |
| 1723 */ | |
| 1724 void | |
| 1725 emacs_handle_focus_change_final (Lisp_Object frame_inp_and_dev) | |
| 1726 { | |
| 1727 Lisp_Object frame = Fcar (frame_inp_and_dev); | |
| 1728 Lisp_Object device = Fcar (Fcdr (frame_inp_and_dev)); | |
| 1729 int in_p = !NILP (Fcdr (Fcdr (frame_inp_and_dev))); | |
| 1730 struct device *d; | |
| 1731 int count; | |
| 1732 | |
| 1733 if (!DEVICE_LIVE_P (XDEVICE (device))) | |
| 1734 return; | |
| 1735 else | |
| 1736 d = XDEVICE (device); | |
| 1737 | |
| 1738 if (in_p) | |
| 1739 { | |
| 1740 Lisp_Object focus_frame; | |
| 1741 | |
| 1742 if (!FRAME_LIVE_P (XFRAME (frame))) | |
| 1743 return; | |
| 1744 else | |
| 1745 focus_frame = DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d); | |
| 1746 | |
| 1747 DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d) = frame; | |
| 1748 if (FRAMEP (focus_frame) && !EQ (frame, focus_frame)) | |
| 1749 { | |
| 1750 /* Oops, we missed a focus-out event. */ | |
| 1751 Fselect_frame (focus_frame); | |
| 1752 /* Do an unwind-protect in case an error occurs in | |
| 1753 the deselect-frame-hook */ | |
| 1754 count = specpdl_depth (); | |
| 1755 record_unwind_protect (cleanup_after_missed_defocusing, frame); | |
| 1756 run_deselect_frame_hook (); | |
| 771 | 1757 unbind_to (count); |
| 428 | 1758 /* the cleanup method changed the focus frame to nil, so |
| 1759 we need to reflect this */ | |
| 1760 focus_frame = Qnil; | |
| 1761 } | |
| 1762 else | |
| 1763 Fselect_frame (frame); | |
| 1764 if (!EQ (frame, focus_frame)) | |
| 1765 run_select_frame_hook (); | |
| 1766 } | |
| 1767 else | |
| 1768 { | |
| 1769 /* We ignore the frame reported in the event. If it's different | |
| 1770 from where we think the focus was, oh well -- we messed up. | |
| 1771 Nonetheless, we pretend we were right, for sensible behavior. */ | |
| 1772 frame = DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d); | |
| 1773 if (!NILP (frame)) | |
| 1774 { | |
| 1775 DEVICE_FRAME_WITH_FOCUS_FOR_HOOKS (d) = Qnil; | |
| 1776 run_deselect_frame_hook (); | |
| 1777 } | |
| 1778 } | |
| 1779 } | |
| 1780 | |
| 1781 | |
| 1782 /**********************************************************************/ | |
| 1268 | 1783 /* input pending/quit checking */ |
| 1784 /**********************************************************************/ | |
| 1785 | |
| 1786 /* If HOW_MANY is 0, return true if there are any user or non-user events | |
| 1787 pending. If HOW_MANY is > 0, return true if there are that many *user* | |
| 1788 events pending, irrespective of non-user events. */ | |
| 1789 | |
| 1790 static int | |
| 1791 event_stream_event_pending_p (int how_many) | |
| 1792 { | |
| 1793 /* #### Hmmm ... There may be some duplication in "drain queue" and | |
| 1794 "event pending". Couldn't we just drain the queue and see what's in | |
| 1795 it, and not maybe need a separate event method for this? Would this | |
| 1796 work when HOW_MANY is 0? Maybe this would be slow? */ | |
| 1797 return event_stream && event_stream->event_pending_p (how_many); | |
| 1798 } | |
| 1799 | |
| 1800 static void | |
| 1801 event_stream_force_event_pending (struct frame *f) | |
| 1802 { | |
| 1803 if (event_stream->force_event_pending_cb) | |
| 1804 event_stream->force_event_pending_cb (f); | |
| 1805 } | |
| 1806 | |
| 1807 void | |
| 1808 event_stream_drain_queue (void) | |
| 1809 { | |
| 1318 | 1810 /* This can call Lisp */ |
| 1268 | 1811 if (event_stream && event_stream->drain_queue_cb) |
| 1812 event_stream->drain_queue_cb (); | |
| 1813 } | |
| 1814 | |
| 1815 /* Return non-zero if at least HOW_MANY user events are pending. */ | |
| 1816 int | |
| 1817 detect_input_pending (int how_many) | |
| 1818 { | |
| 1318 | 1819 /* This can call Lisp */ |
| 1268 | 1820 Lisp_Object event; |
| 1821 | |
| 1822 if (!NILP (Vunread_command_event)) | |
| 1823 how_many--; | |
| 1824 | |
| 1825 how_many -= XINT (Fsafe_length (Vunread_command_events)); | |
| 1826 | |
| 1827 if (how_many <= 0) | |
| 1828 return 1; | |
| 1829 | |
| 1830 EVENT_CHAIN_LOOP (event, command_event_queue) | |
| 1831 { | |
| 1832 if (XEVENT_TYPE (event) != eval_event | |
| 1833 && XEVENT_TYPE (event) != magic_eval_event) | |
| 1834 { | |
| 1835 how_many--; | |
| 1836 if (how_many <= 0) | |
| 1837 return 1; | |
| 1838 } | |
| 1839 } | |
| 1840 | |
| 1841 return event_stream_event_pending_p (how_many); | |
| 1842 } | |
| 1843 | |
| 1844 DEFUN ("input-pending-p", Finput_pending_p, 0, 0, 0, /* | |
| 1845 Return t if command input is currently available with no waiting. | |
| 1846 Actually, the value is nil only if we can be sure that no input is available. | |
| 1847 */ | |
| 1848 ()) | |
| 1849 { | |
| 1318 | 1850 /* This can call Lisp */ |
| 1268 | 1851 return detect_input_pending (1) ? Qt : Qnil; |
| 1852 } | |
| 1853 | |
| 1854 static int | |
| 1855 maybe_read_quit_event (Lisp_Event *event) | |
| 1856 { | |
| 1857 /* A C-g that came from `sigint_happened' will always come from the | |
| 1858 controlling terminal. If that doesn't exist, however, then the | |
| 1859 user manually sent us a SIGINT, and we pretend the C-g came from | |
| 1860 the selected console. */ | |
| 1861 struct console *con; | |
| 1862 | |
| 1863 if (CONSOLEP (Vcontrolling_terminal) && | |
| 1864 CONSOLE_LIVE_P (XCONSOLE (Vcontrolling_terminal))) | |
| 1865 con = XCONSOLE (Vcontrolling_terminal); | |
| 1866 else | |
| 1867 con = XCONSOLE (Fselected_console ()); | |
| 1868 | |
| 1869 if (sigint_happened) | |
| 1870 { | |
| 1871 sigint_happened = 0; | |
| 1872 Vquit_flag = Qnil; | |
| 1873 Fcopy_event (CONSOLE_QUIT_EVENT (con), wrap_event (event)); | |
| 1874 return 1; | |
| 1875 } | |
| 1876 return 0; | |
| 1877 } | |
| 1878 | |
| 1879 struct remove_quit_p_data | |
| 1880 { | |
| 1881 int critical; | |
| 1882 }; | |
| 1883 | |
| 1884 static int | |
| 1885 remove_quit_p_event (Lisp_Object ev, void *the_data) | |
| 1886 { | |
| 1887 struct remove_quit_p_data *data = (struct remove_quit_p_data *) the_data; | |
| 1888 struct console *con = event_console_or_selected (ev); | |
| 1889 | |
| 1890 if (XEVENT_TYPE (ev) == key_press_event) | |
| 1891 { | |
| 1892 if (event_matches_key_specifier_p (ev, CONSOLE_QUIT_EVENT (con))) | |
| 1893 return 1; | |
| 1894 if (event_matches_key_specifier_p (ev, | |
| 1895 CONSOLE_CRITICAL_QUIT_EVENT (con))) | |
| 1896 { | |
| 1897 data->critical = 1; | |
| 1898 return 1; | |
| 1899 } | |
| 1900 } | |
| 1901 | |
| 1902 return 0; | |
| 1903 } | |
| 1904 | |
| 1905 void | |
| 1906 event_stream_quit_p (void) | |
| 1907 { | |
| 1318 | 1908 /* This can call Lisp */ |
| 1268 | 1909 struct remove_quit_p_data data; |
| 1910 | |
| 1911 /* Quit checking cannot happen in modal loop. Because it attempts to | |
| 1912 retrieve and dispatch events, it will cause lots of problems if we try | |
| 1913 to do this when already in the process of doing this -- deadlocking | |
| 1914 under Windows, crashes in lwlib etc. under X due to non-reentrant | |
| 1915 code. This is automatically caught, however, in | |
| 1916 event_stream_drain_queue() (checks for in_modal_loop in the | |
| 1917 event-specific code). */ | |
| 1918 | |
| 1919 /* Drain queue so we can check for pending C-g events. */ | |
| 1920 event_stream_drain_queue (); | |
| 1921 data.critical = 0; | |
| 1922 | |
| 1923 if (map_event_chain_remove (remove_quit_p_event, | |
| 1924 &dispatch_event_queue, | |
| 1925 &dispatch_event_queue_tail, | |
| 1926 &data, MECR_DEALLOCATE_EVENT)) | |
| 1927 Vquit_flag = data.critical ? Qcritical : Qt; | |
| 1928 } | |
| 1929 | |
| 1930 Lisp_Object | |
| 1931 event_stream_protect_modal_loop (const char *error_string, | |
| 1932 Lisp_Object (*bfun) (void *barg), | |
| 1933 void *barg, int flags) | |
| 1934 { | |
| 1935 Lisp_Object tmp; | |
| 1936 | |
| 1937 ++in_modal_loop; | |
| 1938 tmp = call_trapping_problems (Qevent, error_string, flags, 0, bfun, barg); | |
| 1939 --in_modal_loop; | |
| 1940 | |
| 1941 return tmp; | |
| 1942 } | |
| 1943 | |
| 1944 | |
| 1945 /**********************************************************************/ | |
| 428 | 1946 /* retrieving the next event */ |
| 1947 /**********************************************************************/ | |
| 1948 | |
| 1949 static int in_single_console; | |
| 1950 | |
| 1951 /* #### These functions don't currently do anything. */ | |
| 1952 void | |
| 1953 single_console_state (void) | |
| 1954 { | |
| 1955 in_single_console = 1; | |
| 1956 } | |
| 1957 | |
| 1958 void | |
| 1959 any_console_state (void) | |
| 1960 { | |
| 1961 in_single_console = 0; | |
| 1962 } | |
| 1963 | |
| 1964 int | |
| 1965 in_single_console_state (void) | |
| 1966 { | |
| 1967 return in_single_console; | |
| 1968 } | |
| 1969 | |
| 1268 | 1970 static void |
| 1971 event_stream_next_event (Lisp_Event *event) | |
| 1972 { | |
| 1973 Lisp_Object event_obj; | |
| 1974 | |
| 1975 check_event_stream_ok (); | |
| 1976 | |
| 1977 event_obj = wrap_event (event); | |
| 1978 zero_event (event); | |
| 1979 /* SIGINT occurs when C-g was pressed on a TTY. (SIGINT might have | |
| 1980 been sent manually by the user, but we don't care; we treat it | |
| 1981 the same.) | |
| 1982 | |
| 1983 The SIGINT signal handler sets Vquit_flag as well as sigint_happened | |
| 1984 and write a byte on our "fake pipe", which unblocks us when we are | |
| 1985 waiting for an event. */ | |
| 1986 | |
| 1987 /* If SIGINT was received after we disabled quit checking (because | |
| 1988 we want to read C-g's as characters), but before we got a chance | |
| 1989 to start reading, notice it now and treat it as a character to be | |
| 1990 read. If above callers wanted this to be QUIT, they can | |
| 1991 determine this by comparing the event against quit-char. */ | |
| 1992 | |
| 1993 if (maybe_read_quit_event (event)) | |
| 1994 { | |
| 1995 DEBUG_PRINT_EMACS_EVENT ("SIGINT", event_obj); | |
| 1996 return; | |
| 1997 } | |
| 1998 | |
| 1999 /* If a longjmp() happens in the callback, we're screwed. | |
| 2000 Let's hope it doesn't. I think the code here is fairly | |
| 2001 clean and doesn't do this. */ | |
| 2002 emacs_is_blocking = 1; | |
| 2003 event_stream->next_event_cb (event); | |
| 2004 emacs_is_blocking = 0; | |
| 2005 | |
| 2006 /* Now check to see if C-g was pressed while we were blocking. | |
| 2007 We treat it as an event, just like above. */ | |
| 2008 if (maybe_read_quit_event (event)) | |
| 2009 { | |
| 2010 DEBUG_PRINT_EMACS_EVENT ("SIGINT", event_obj); | |
| 2011 return; | |
| 2012 } | |
| 2013 | |
| 2014 #ifdef DEBUG_XEMACS | |
| 2015 /* timeout events have more info set later, so | |
| 2016 print the event out in next_event_internal(). */ | |
| 2017 if (event->event_type != timeout_event) | |
| 2018 DEBUG_PRINT_EMACS_EVENT ("real", event_obj); | |
| 2019 #endif | |
| 2020 maybe_kbd_translate (event_obj); | |
| 2021 } | |
| 428 | 2022 |
| 853 | 2023 /* Read an event from the window system (or tty). If ALLOW_QUEUED is |
| 2024 non-zero, read from the command-event queue first. | |
| 2025 | |
| 2026 If C-g was pressed, this function will attempt to QUIT. If you want | |
| 2027 to read C-g as an event, wrap this function with a call to | |
| 2028 begin_dont_check_for_quit(), and set Vquit_flag to Qnil just before | |
| 2029 you unbind. In this case, TARGET_EVENT will contain a C-g. | |
| 2030 | |
| 2031 Note that even if you are interested in C-g doing QUIT, a caller of you | |
| 2032 might not be. | |
| 2033 */ | |
| 2034 | |
| 428 | 2035 static void |
| 2036 next_event_internal (Lisp_Object target_event, int allow_queued) | |
| 2037 { | |
| 2038 struct gcpro gcpro1; | |
| 1292 | 2039 PROFILE_DECLARE (); |
| 2040 | |
| 853 | 2041 QUIT; |
| 428 | 2042 |
| 1292 | 2043 PROFILE_RECORD_ENTERING_SECTION (QSnext_event_internal); |
| 2044 | |
| 428 | 2045 assert (NILP (XEVENT_NEXT (target_event))); |
| 2046 | |
| 2047 GCPRO1 (target_event); | |
| 2048 | |
| 2049 /* When focus_follows_mouse is nil, if a frame change took place, we need | |
| 2050 * to actually switch window manager focus to the selected window now. | |
| 2051 */ | |
| 2052 if (!focus_follows_mouse) | |
| 2053 investigate_frame_change (); | |
| 2054 | |
| 2055 if (allow_queued && !NILP (command_event_queue)) | |
| 2056 { | |
| 2057 Lisp_Object event = dequeue_command_event (); | |
| 2058 Fcopy_event (event, target_event); | |
| 2059 Fdeallocate_event (event); | |
| 2060 DEBUG_PRINT_EMACS_EVENT ("command event queue", target_event); | |
| 2061 } | |
| 2062 else | |
| 2063 { | |
| 440 | 2064 Lisp_Event *e = XEVENT (target_event); |
| 428 | 2065 |
| 2066 /* The command_event_queue was empty. Wait for an event. */ | |
| 2067 event_stream_next_event (e); | |
| 2068 /* If this was a timeout, then we need to extract some data | |
| 2069 out of the returned closure and might need to resignal | |
| 2070 it. */ | |
| 934 | 2071 if (EVENT_TYPE (e) == timeout_event) |
| 428 | 2072 { |
| 2073 Lisp_Object tristan, isolde; | |
| 2074 | |
| 1204 | 2075 SET_EVENT_TIMEOUT_ID_NUMBER (e, |
| 2076 event_stream_resignal_wakeup (EVENT_TIMEOUT_INTERVAL_ID (e), 0, &tristan, &isolde)); | |
| 2077 | |
| 2078 SET_EVENT_TIMEOUT_FUNCTION (e, tristan); | |
| 2079 SET_EVENT_TIMEOUT_OBJECT (e, isolde); | |
| 934 | 2080 /* next_event_internal() doesn't print out timeout events |
| 2081 because of the extra info we just set. */ | |
| 428 | 2082 DEBUG_PRINT_EMACS_EVENT ("real, timeout", target_event); |
| 2083 } | |
| 2084 | |
| 853 | 2085 /* If we read a ^G, then set quit-flag and try to QUIT. |
| 2086 This may be blocked (see above). | |
| 428 | 2087 */ |
| 934 | 2088 if (EVENT_TYPE (e) == key_press_event && |
| 428 | 2089 event_matches_key_specifier_p |
| 1204 | 2090 (target_event, CONSOLE_QUIT_EVENT (XCONSOLE (EVENT_CHANNEL (e))))) |
| 428 | 2091 { |
| 2092 Vquit_flag = Qt; | |
| 853 | 2093 QUIT; |
| 428 | 2094 } |
| 2095 } | |
| 2096 | |
| 2097 UNGCPRO; | |
| 1292 | 2098 |
| 2099 PROFILE_RECORD_EXITING_SECTION (QSnext_event_internal); | |
| 428 | 2100 } |
| 2101 | |
| 853 | 2102 void |
| 428 | 2103 run_pre_idle_hook (void) |
| 2104 { | |
| 1318 | 2105 /* This can call Lisp */ |
| 428 | 2106 if (!NILP (Vpre_idle_hook) |
| 1268 | 2107 && !detect_input_pending (1)) |
| 853 | 2108 safe_run_hook_trapping_problems |
| 1333 | 2109 (Qredisplay, Qpre_idle_hook, |
| 1268 | 2110 /* Quit is inhibited as a result of being within next-event so |
| 2111 we need to fix that. */ | |
| 2112 INHIBIT_EXISTING_PERMANENT_DISPLAY_OBJECT_DELETION | UNINHIBIT_QUIT); | |
| 428 | 2113 } |
| 2114 | |
| 2115 DEFUN ("next-event", Fnext_event, 0, 2, 0, /* | |
| 2116 Return the next available event. | |
| 2117 Pass this object to `dispatch-event' to handle it. | |
| 2118 In most cases, you will want to use `next-command-event', which returns | |
| 2119 the next available "user" event (i.e. keypress, button-press, | |
| 2120 button-release, or menu selection) instead of this function. | |
| 2121 | |
| 2122 If EVENT is non-nil, it should be an event object and will be filled in | |
| 2123 and returned; otherwise a new event object will be created and returned. | |
| 2124 If PROMPT is non-nil, it should be a string and will be displayed in the | |
| 2125 echo area while this function is waiting for an event. | |
| 2126 | |
| 2127 The next available event will be | |
| 2128 | |
| 2129 -- any events in `unread-command-events' or `unread-command-event'; else | |
| 2130 -- the next event in the currently executing keyboard macro, if any; else | |
| 442 | 2131 -- an event queued by `enqueue-eval-event', if any, or any similar event |
| 2132 queued internally, such as a misc-user event. (For example, when an item | |
| 2133 is selected from a menu or from a `question'-type dialog box, the item's | |
| 2134 callback is not immediately executed, but instead a misc-user event | |
| 2135 is generated and placed onto this queue; when it is dispatched, the | |
| 2136 callback is executed.) Else | |
| 428 | 2137 -- the next available event from the window system or terminal driver. |
| 2138 | |
| 2139 In the last case, this function will block until an event is available. | |
| 2140 | |
| 2141 The returned event will be one of the following types: | |
| 2142 | |
| 2143 -- a key-press event. | |
| 2144 -- a button-press or button-release event. | |
| 2145 -- a misc-user-event, meaning the user selected an item on a menu or used | |
| 2146 the scrollbar. | |
| 2147 -- a process event, meaning that output from a subprocess is available. | |
| 2148 -- a timeout event, meaning that a timeout has elapsed. | |
| 2149 -- an eval event, which simply causes a function to be executed when the | |
| 2150 event is dispatched. Eval events are generated by `enqueue-eval-event' | |
| 2151 or by certain other conditions happening. | |
| 2152 -- a magic event, indicating that some window-system-specific event | |
| 2153 happened (such as a focus-change notification) that must be handled | |
| 2154 synchronously with other events. `dispatch-event' knows what to do with | |
| 2155 these events. | |
| 2156 */ | |
| 2157 (event, prompt)) | |
| 2158 { | |
| 2159 /* This function can call lisp */ | |
| 2160 /* #### We start out using the selected console before an event | |
| 2161 is received, for echoing the partially completed command. | |
| 2162 This is most definitely wrong -- there needs to be a separate | |
| 2163 echo area for each console! */ | |
| 2164 struct console *con = XCONSOLE (Vselected_console); | |
| 2165 struct command_builder *command_builder = | |
| 2166 XCOMMAND_BUILDER (con->command_builder); | |
| 2167 int store_this_key = 0; | |
| 2168 struct gcpro gcpro1; | |
| 853 | 2169 int depth; |
| 1292 | 2170 PROFILE_DECLARE (); |
| 428 | 2171 |
| 2172 GCPRO1 (event); | |
| 853 | 2173 |
| 1268 | 2174 /* This is not strictly necessary. Trying to retrieve an event inside of |
| 2175 a modal loop can cause major problems (see event_stream_quit_p()), but | |
| 2176 the event-specific code knows about this and will make sure we don't | |
| 2177 do anything dangerous. However, if we've gotten here, it's highly | |
| 2178 likely that some code is trying to fetch user events (e.g. in custom | |
| 2179 dialog-box code), and will almost certainly deadlock, so it's probably | |
| 2180 best to error out. #### This could cause problems because there are | |
| 2181 (potentially, at least) legitimate reasons for calling next-event | |
| 2182 inside of a modal loop, in particular if the code is trying to search | |
| 2183 for a timeout event, which will still get retrieved in such a case. | |
| 2184 However, the code to error in such a case has already been present for | |
| 2185 a long time without obvious problems so leaving it in isn't so | |
| 1279 | 2186 bad. |
| 2187 | |
| 2188 #### I used to conditionalize on in_modal_loop but that fails utterly | |
| 2189 because event-msw.c specifically calls Fnext_event() inside of a modal | |
| 2190 loop to clear the dispatch queue. --ben */ | |
| 1315 | 2191 #ifdef HAVE_MENUBARS |
| 1279 | 2192 if (in_menu_callback) |
| 2193 invalid_operation ("Attempt to call next-event inside menu callback", | |
| 1268 | 2194 Qunbound); |
| 1315 | 2195 #endif /* HAVE_MENUBARS */ |
| 1268 | 2196 |
| 1292 | 2197 PROFILE_RECORD_ENTERING_SECTION (Qnext_event); |
| 2198 | |
| 853 | 2199 depth = begin_dont_check_for_quit (); |
| 428 | 2200 |
| 2201 if (NILP (event)) | |
| 2202 event = Fmake_event (Qnil, Qnil); | |
| 2203 else | |
| 2204 CHECK_LIVE_EVENT (event); | |
| 2205 | |
| 2206 if (!NILP (prompt)) | |
| 2207 { | |
| 2208 Bytecount len; | |
| 2209 CHECK_STRING (prompt); | |
| 2210 | |
| 2211 len = XSTRING_LENGTH (prompt); | |
| 2212 if (command_builder->echo_buf_length < len) | |
| 2213 len = command_builder->echo_buf_length - 1; | |
| 2214 memcpy (command_builder->echo_buf, XSTRING_DATA (prompt), len); | |
| 2215 command_builder->echo_buf[len] = 0; | |
| 2216 command_builder->echo_buf_index = len; | |
| 2217 echo_area_message (XFRAME (CONSOLE_SELECTED_FRAME (con)), | |
| 2218 command_builder->echo_buf, | |
| 2219 Qnil, 0, | |
| 2220 command_builder->echo_buf_index, | |
| 2221 Qcommand); | |
| 2222 } | |
| 2223 | |
| 2224 start_over_and_avoid_hosage: | |
| 2225 | |
| 2226 /* If there is something in unread-command-events, simply return it. | |
| 2227 But do some error checking to make sure the user hasn't put something | |
| 2228 in the unread-command-events that they shouldn't have. | |
| 2229 This does not update this-command-keys and recent-keys. | |
| 2230 */ | |
| 2231 if (!NILP (Vunread_command_events)) | |
| 2232 { | |
| 2233 if (!CONSP (Vunread_command_events)) | |
| 2234 { | |
| 2235 Vunread_command_events = Qnil; | |
| 563 | 2236 signal_error_1 (Qwrong_type_argument, |
| 428 | 2237 list3 (Qconsp, Vunread_command_events, |
| 2238 Qunread_command_events)); | |
| 2239 } | |
| 2240 else | |
| 2241 { | |
| 2242 Lisp_Object e = XCAR (Vunread_command_events); | |
| 2243 Vunread_command_events = XCDR (Vunread_command_events); | |
| 2244 if (!EVENTP (e) || !command_event_p (e)) | |
| 563 | 2245 signal_error_1 (Qwrong_type_argument, |
| 428 | 2246 list3 (Qcommand_event_p, e, Qunread_command_events)); |
| 853 | 2247 redisplay_no_pre_idle_hook (); |
| 428 | 2248 if (!EQ (e, event)) |
| 2249 Fcopy_event (e, event); | |
| 2250 DEBUG_PRINT_EMACS_EVENT ("unread-command-events", event); | |
| 2251 } | |
| 2252 } | |
| 2253 | |
| 2254 /* Do similar for unread-command-event (obsoleteness support). */ | |
| 2255 else if (!NILP (Vunread_command_event)) | |
| 2256 { | |
| 2257 Lisp_Object e = Vunread_command_event; | |
| 2258 Vunread_command_event = Qnil; | |
| 2259 | |
| 2260 if (!EVENTP (e) || !command_event_p (e)) | |
| 2261 { | |
| 563 | 2262 signal_error_1 (Qwrong_type_argument, |
| 428 | 2263 list3 (Qeventp, e, Qunread_command_event)); |
| 2264 } | |
| 2265 if (!EQ (e, event)) | |
| 2266 Fcopy_event (e, event); | |
| 853 | 2267 redisplay_no_pre_idle_hook (); |
| 428 | 2268 DEBUG_PRINT_EMACS_EVENT ("unread-command-event", event); |
| 2269 } | |
| 2270 | |
| 2271 /* If we're executing a keyboard macro, take the next event from that, | |
| 2272 and update this-command-keys and recent-keys. | |
| 2273 Note that the unread-command-events take precedence over kbd macros. | |
| 2274 */ | |
| 2275 else | |
| 2276 { | |
| 2277 if (!NILP (Vexecuting_macro)) | |
| 2278 { | |
| 853 | 2279 redisplay_no_pre_idle_hook (); |
| 428 | 2280 pop_kbd_macro_event (event); /* This throws past us at |
| 2281 end-of-macro. */ | |
| 2282 store_this_key = 1; | |
| 2283 DEBUG_PRINT_EMACS_EVENT ("keyboard macro", event); | |
| 2284 } | |
| 2285 /* Otherwise, read a real event, possibly from the | |
| 2286 command_event_queue, and update this-command-keys and | |
| 2287 recent-keys. */ | |
| 2288 else | |
| 2289 { | |
| 2290 redisplay (); | |
| 2291 next_event_internal (event, 1); | |
| 2292 store_this_key = 1; | |
| 2293 } | |
| 2294 } | |
| 2295 | |
| 853 | 2296 /* temporarily reenable quit checking here, because arbitrary lisp |
| 2297 is executed */ | |
| 2298 Vquit_flag = Qnil; /* see begin_dont_check_for_quit() */ | |
| 2299 unbind_to (depth); | |
| 428 | 2300 status_notify (); /* Notice process change */ |
| 853 | 2301 depth = begin_dont_check_for_quit (); |
| 428 | 2302 |
| 2303 /* Since we can free the most stuff here | |
| 2304 * (since this is typically called from | |
| 2305 * the command-loop top-level). */ | |
| 851 | 2306 if (need_to_check_c_alloca) |
| 2307 xemacs_c_alloca (0); /* Cause a garbage collection now */ | |
| 428 | 2308 |
| 2309 if (object_dead_p (XEVENT (event)->channel)) | |
| 2310 /* event_console_or_selected may crash if the channel is dead. | |
| 2311 Best just to eat it and get the next event. */ | |
| 2312 goto start_over_and_avoid_hosage; | |
| 2313 | |
| 2314 /* OK, now we can stop the selected-console kludge and use the | |
| 2315 actual console from the event. */ | |
| 2316 con = event_console_or_selected (event); | |
| 2317 command_builder = XCOMMAND_BUILDER (con->command_builder); | |
| 2318 | |
| 2319 switch (XEVENT_TYPE (event)) | |
| 2320 { | |
| 2321 case button_release_event: | |
| 2322 case misc_user_event: | |
| 2323 /* don't echo menu accelerator keys */ | |
| 2324 reset_key_echo (command_builder, 1); | |
| 2325 goto EXECUTE_KEY; | |
| 2326 case button_press_event: /* key or mouse input can trigger prompting */ | |
| 2327 goto STORE_AND_EXECUTE_KEY; | |
| 2328 case key_press_event: /* any key input can trigger autosave */ | |
| 2329 break; | |
| 898 | 2330 default: |
| 2331 goto RETURN; | |
| 428 | 2332 } |
| 2333 | |
| 853 | 2334 /* temporarily reenable quit checking here, because we could get stuck */ |
| 2335 Vquit_flag = Qnil; /* see begin_dont_check_for_quit() */ | |
| 2336 unbind_to (depth); | |
| 428 | 2337 maybe_do_auto_save (); |
| 853 | 2338 depth = begin_dont_check_for_quit (); |
| 2339 | |
| 428 | 2340 num_input_chars++; |
| 2341 STORE_AND_EXECUTE_KEY: | |
| 2342 if (store_this_key) | |
| 2343 { | |
| 2344 echo_key_event (command_builder, event); | |
| 2345 } | |
| 2346 | |
| 2347 EXECUTE_KEY: | |
| 2348 /* Store the last-input-event. The semantics of this is that it is | |
| 2349 the thing most recently returned by next-command-event. It need | |
| 2350 not have come from the keyboard or a keyboard macro, it may have | |
| 2351 come from unread-command-events. It's always a command-event (a | |
| 2352 key, click, or menu selection), never a motion or process event. | |
| 2353 */ | |
| 2354 if (!EVENTP (Vlast_input_event)) | |
| 2355 Vlast_input_event = Fmake_event (Qnil, Qnil); | |
| 2356 if (XEVENT_TYPE (Vlast_input_event) == dead_event) | |
| 2357 { | |
| 2358 Vlast_input_event = Fmake_event (Qnil, Qnil); | |
| 563 | 2359 invalid_state ("Someone deallocated last-input-event!", Qunbound); |
| 428 | 2360 } |
| 2361 if (! EQ (event, Vlast_input_event)) | |
| 2362 Fcopy_event (event, Vlast_input_event); | |
| 2363 | |
| 2364 /* last-input-char and last-input-time are derived from | |
| 2365 last-input-event. | |
| 2366 Note that last-input-char will never have its high-bit set, in an | |
| 2367 effort to sidestep the ambiguity between M-x and oslash. | |
| 2368 */ | |
| 2862 | 2369 Vlast_input_char = Fevent_to_character (Vlast_input_event, Qnil, Qnil, Qnil); |
| 428 | 2370 { |
| 2371 EMACS_TIME t; | |
| 2372 EMACS_GET_TIME (t); | |
| 2373 if (!CONSP (Vlast_input_time)) | |
| 2374 Vlast_input_time = Fcons (Qnil, Qnil); | |
| 2375 XCAR (Vlast_input_time) = make_int ((EMACS_SECS (t) >> 16) & 0xffff); | |
| 2376 XCDR (Vlast_input_time) = make_int ((EMACS_SECS (t) >> 0) & 0xffff); | |
| 2377 if (!CONSP (Vlast_command_event_time)) | |
| 2378 Vlast_command_event_time = list3 (Qnil, Qnil, Qnil); | |
| 2379 XCAR (Vlast_command_event_time) = | |
| 2380 make_int ((EMACS_SECS (t) >> 16) & 0xffff); | |
| 2381 XCAR (XCDR (Vlast_command_event_time)) = | |
| 2382 make_int ((EMACS_SECS (t) >> 0) & 0xffff); | |
| 2383 XCAR (XCDR (XCDR (Vlast_command_event_time))) | |
| 2384 = make_int (EMACS_USECS (t)); | |
| 2385 } | |
| 2386 /* If this key came from the keyboard or from a keyboard macro, then | |
| 2387 it goes into the recent-keys and this-command-keys vectors. | |
| 2388 If this key came from the keyboard, and we're defining a keyboard | |
| 2389 macro, then it goes into the macro. | |
| 2390 */ | |
| 2391 if (store_this_key) | |
| 2392 { | |
| 479 | 2393 if (!is_scrollbar_event (event)) /* #### not quite right, see |
| 2394 comment in execute_command_event */ | |
| 2395 push_this_command_keys (event); | |
| 428 | 2396 if (!inhibit_input_event_recording) |
| 2397 push_recent_keys (event); | |
| 2398 dribble_out_event (event); | |
| 2399 if (!NILP (con->defining_kbd_macro) && NILP (Vexecuting_macro)) | |
| 2400 { | |
| 2401 if (!EVENTP (command_builder->current_events)) | |
| 2402 finalize_kbd_macro_chars (con); | |
| 2403 store_kbd_macro_event (event); | |
| 2404 } | |
| 2405 } | |
| 853 | 2406 /* If this is the help char and there is a help form, then execute |
| 2407 the help form and swallow this character. Note that | |
| 2408 execute_help_form() calls Fnext_command_event(), which calls this | |
| 2409 function, as well as Fdispatch_event. */ | |
| 428 | 2410 if (!NILP (Vhelp_form) && |
| 1204 | 2411 event_matches_key_specifier_p (event, Vhelp_char)) |
| 853 | 2412 { |
| 2413 /* temporarily reenable quit checking here, because we could get stuck */ | |
| 2414 Vquit_flag = Qnil; /* see begin_dont_check_for_quit() */ | |
| 2415 unbind_to (depth); | |
| 2416 execute_help_form (command_builder, event); | |
| 2417 depth = begin_dont_check_for_quit (); | |
| 2418 } | |
| 428 | 2419 |
| 2420 RETURN: | |
| 853 | 2421 Vquit_flag = Qnil; /* see begin_dont_check_for_quit() */ |
| 2422 unbind_to (depth); | |
| 2423 | |
| 1292 | 2424 PROFILE_RECORD_EXITING_SECTION (Qnext_event); |
| 2425 | |
| 428 | 2426 UNGCPRO; |
| 853 | 2427 |
| 428 | 2428 return event; |
| 2429 } | |
| 2430 | |
| 2431 DEFUN ("next-command-event", Fnext_command_event, 0, 2, 0, /* | |
| 2432 Return the next available "user" event. | |
| 2433 Pass this object to `dispatch-event' to handle it. | |
| 2434 | |
| 2435 If EVENT is non-nil, it should be an event object and will be filled in | |
| 2436 and returned; otherwise a new event object will be created and returned. | |
| 2437 If PROMPT is non-nil, it should be a string and will be displayed in the | |
| 2438 echo area while this function is waiting for an event. | |
| 2439 | |
| 2440 The event returned will be a keyboard, mouse press, or mouse release event. | |
| 2441 If there are non-command events available (mouse motion, sub-process output, | |
| 2442 etc) then these will be executed (with `dispatch-event') and discarded. This | |
| 2443 function is provided as a convenience; it is roughly equivalent to the lisp code | |
| 2444 | |
| 2445 (while (progn | |
| 2446 (next-event event prompt) | |
| 2447 (not (or (key-press-event-p event) | |
| 2448 (button-press-event-p event) | |
| 2449 (button-release-event-p event) | |
| 2450 (misc-user-event-p event)))) | |
| 2451 (dispatch-event event)) | |
| 2452 | |
| 2453 but it also makes a provision for displaying keystrokes in the echo area. | |
| 2454 */ | |
| 2455 (event, prompt)) | |
| 2456 { | |
| 2457 /* This function can GC */ | |
| 2458 struct gcpro gcpro1; | |
| 2459 GCPRO1 (event); | |
| 934 | 2460 |
| 428 | 2461 maybe_echo_keys (XCOMMAND_BUILDER |
| 2462 (XCONSOLE (Vselected_console)-> | |
| 2463 command_builder), 0); /* #### This sucks bigtime */ | |
| 853 | 2464 |
| 428 | 2465 for (;;) |
| 2466 { | |
| 2467 event = Fnext_event (event, prompt); | |
| 2468 if (command_event_p (event)) | |
| 2469 break; | |
| 2470 else | |
| 2471 execute_internal_event (event); | |
| 2472 } | |
| 2473 UNGCPRO; | |
| 2474 return event; | |
| 2475 } | |
| 2476 | |
| 442 | 2477 DEFUN ("dispatch-non-command-events", Fdispatch_non_command_events, 0, 0, 0, /* |
| 2478 Dispatch any pending "magic" events. | |
| 2479 | |
| 2480 This function is useful for forcing the redisplay of native | |
| 2481 widgets. Normally these are redisplayed through a native window-system | |
| 2482 event encoded as magic event, rather than by the redisplay code. This | |
| 2483 function does not call redisplay or do any of the other things that | |
| 2484 `next-event' does. | |
| 2485 */ | |
| 2486 ()) | |
| 2487 { | |
| 2488 /* This function can GC */ | |
| 2489 Lisp_Object event = Qnil; | |
| 2490 struct gcpro gcpro1; | |
| 2491 GCPRO1 (event); | |
| 2492 event = Fmake_event (Qnil, Qnil); | |
| 2493 | |
| 2494 /* Make sure that there will be something in the native event queue | |
| 2495 so that externally managed things (e.g. widgets) get some CPU | |
| 2496 time. */ | |
| 2497 event_stream_force_event_pending (selected_frame ()); | |
| 2498 | |
| 2499 while (event_stream_event_pending_p (0)) | |
| 2500 { | |
| 2501 /* We're a generator of the command_event_queue, so we can't be a | |
| 2502 consumer as well. Also, we have no reason to consult the | |
| 2503 command_event_queue; there are only user and eval-events there, | |
| 2504 and we'd just have to put them back anyway. | |
| 2505 */ | |
| 2506 next_event_internal (event, 0); /* blocks */ | |
| 2507 if (XEVENT_TYPE (event) == magic_event || | |
| 2508 XEVENT_TYPE (event) == timeout_event || | |
| 2509 XEVENT_TYPE (event) == process_event || | |
| 2510 XEVENT_TYPE (event) == pointer_motion_event) | |
| 2511 execute_internal_event (event); | |
| 2512 else | |
| 2513 { | |
| 2514 enqueue_command_event_1 (event); | |
| 2515 break; | |
| 2516 } | |
| 2517 } | |
| 2518 | |
| 2519 Fdeallocate_event (event); | |
| 2520 UNGCPRO; | |
| 2521 return Qnil; | |
| 2522 } | |
| 2523 | |
| 428 | 2524 static void |
| 2525 reset_current_events (struct command_builder *command_builder) | |
| 2526 { | |
| 2527 Lisp_Object event = command_builder->current_events; | |
| 2528 reset_command_builder_event_chain (command_builder); | |
| 2529 if (EVENTP (event)) | |
| 2530 deallocate_event_chain (event); | |
| 2531 } | |
| 2532 | |
| 1268 | 2533 static int |
| 2286 | 2534 command_event_p_cb (Lisp_Object ev, void *UNUSED (the_data)) |
| 1268 | 2535 { |
| 2536 return command_event_p (ev); | |
| 2537 } | |
| 2538 | |
| 428 | 2539 DEFUN ("discard-input", Fdiscard_input, 0, 0, 0, /* |
| 2540 Discard any pending "user" events. | |
| 2541 Also cancel any kbd macro being defined. | |
| 2542 A user event is a key press, button press, button release, or | |
| 2543 "misc-user" event (menu selection or scrollbar action). | |
| 2544 */ | |
| 2545 ()) | |
| 2546 { | |
| 1318 | 2547 /* This can call Lisp */ |
| 1268 | 2548 Lisp_Object concons; |
| 2549 | |
| 2550 CONSOLE_LOOP (concons) | |
| 428 | 2551 { |
| 1268 | 2552 struct console *con = XCONSOLE (XCAR (concons)); |
| 2553 | |
| 2554 /* If a macro was being defined then we have to mark the modeline | |
| 2555 has changed to ensure that it gets updated correctly. */ | |
| 2556 if (!NILP (con->defining_kbd_macro)) | |
| 2557 MARK_MODELINE_CHANGED; | |
| 2558 con->defining_kbd_macro = Qnil; | |
| 2559 reset_current_events (XCOMMAND_BUILDER (con->command_builder)); | |
| 428 | 2560 } |
| 2561 | |
| 1268 | 2562 /* This function used to be a lot more complicated. Now, we just |
| 2563 drain the pending queue and discard all user events from the | |
| 2564 command and dispatch queues. */ | |
| 2565 event_stream_drain_queue (); | |
| 2566 | |
| 2567 map_event_chain_remove (command_event_p_cb, | |
| 2568 &dispatch_event_queue, &dispatch_event_queue_tail, | |
| 2569 0, MECR_DEALLOCATE_EVENT); | |
| 2570 map_event_chain_remove (command_event_p_cb, | |
| 2571 &command_event_queue, &command_event_queue_tail, | |
| 2572 0, MECR_DEALLOCATE_EVENT); | |
| 428 | 2573 |
| 2574 return Qnil; | |
| 2575 } | |
| 2576 | |
| 2577 | |
| 2578 /**********************************************************************/ | |
| 2579 /* pausing until an action occurs */ | |
| 2580 /**********************************************************************/ | |
| 2581 | |
| 2582 /* This is used in accept-process-output, sleep-for and sit-for. | |
| 2583 Before running any process_events in these routines, we set | |
| 1268 | 2584 recursive_sit_for to 1, and use this unwind protect to reset it to |
| 2585 Qnil upon exit. When recursive_sit_for is 1, calling sit-for will | |
| 428 | 2586 cause it to return immediately. |
| 2587 | |
| 2588 All of these routines install timeouts, so we clear the installed | |
| 2589 timeout as well. | |
| 2590 | |
| 2591 Note: It's very easy to break the desired behaviors of these | |
| 2592 3 routines. If you make any changes to anything in this area, run | |
| 2593 the regression tests at the bottom of the file. -- dmoore */ | |
| 2594 | |
| 2595 | |
| 2596 static Lisp_Object | |
| 2597 sit_for_unwind (Lisp_Object timeout_id) | |
| 2598 { | |
| 2599 if (!NILP(timeout_id)) | |
| 2600 Fdisable_timeout (timeout_id); | |
| 2601 | |
| 1268 | 2602 recursive_sit_for = 0; |
| 428 | 2603 return Qnil; |
| 2604 } | |
| 2605 | |
| 2606 /* #### Is (accept-process-output nil 3) supposed to be like (sleep-for 3)? | |
| 2607 */ | |
| 2608 | |
| 2609 DEFUN ("accept-process-output", Faccept_process_output, 0, 3, 0, /* | |
| 2610 Allow any pending output from subprocesses to be read by Emacs. | |
| 2611 It is read into the process' buffers or given to their filter functions. | |
| 2612 Non-nil arg PROCESS means do not return until some output has been received | |
| 2613 from PROCESS. Nil arg PROCESS means do not return until some output has | |
| 2614 been received from any process. | |
| 2615 If the second arg is non-nil, it is the maximum number of seconds to wait: | |
| 2616 this function will return after that much time even if no input has arrived | |
| 2617 from PROCESS. This argument may be a float, meaning wait some fractional | |
| 2618 part of a second. | |
| 2619 If the third arg is non-nil, it is a number of milliseconds that is added | |
| 2620 to the second arg. (This exists only for compatibility.) | |
| 2621 Return non-nil iff we received any output before the timeout expired. | |
| 2622 */ | |
| 2623 (process, timeout_secs, timeout_msecs)) | |
| 2624 { | |
| 2625 /* This function can GC */ | |
| 2626 struct gcpro gcpro1, gcpro2; | |
| 2627 Lisp_Object event = Qnil; | |
| 2628 Lisp_Object result = Qnil; | |
| 2629 int timeout_id = -1; | |
| 2630 int timeout_enabled = 0; | |
| 2631 int done = 0; | |
| 2632 struct buffer *old_buffer = current_buffer; | |
| 2633 int count; | |
| 2634 | |
| 2635 /* We preserve the current buffer but nothing else. If a focus | |
| 2636 change alters the selected window then the top level event loop | |
| 2637 will eventually alter current_buffer to match. In the mean time | |
| 2638 we don't want to mess up whatever called this function. */ | |
| 2639 | |
| 2640 if (!NILP (process)) | |
| 2641 CHECK_PROCESS (process); | |
| 2642 | |
| 2643 GCPRO2 (event, process); | |
| 2644 | |
| 2645 if (!NILP (timeout_secs) || !NILP (timeout_msecs)) | |
| 2646 { | |
| 2647 unsigned long msecs = 0; | |
| 2648 if (!NILP (timeout_secs)) | |
| 2649 msecs = lisp_number_to_milliseconds (timeout_secs, 1); | |
| 2650 if (!NILP (timeout_msecs)) | |
| 2651 { | |
| 2652 CHECK_NATNUM (timeout_msecs); | |
| 2653 msecs += XINT (timeout_msecs); | |
| 2654 } | |
| 2655 if (msecs) | |
| 2656 { | |
| 2657 timeout_id = event_stream_generate_wakeup (msecs, 0, Qnil, Qnil, 0); | |
| 2658 timeout_enabled = 1; | |
| 2659 } | |
| 2660 } | |
| 2661 | |
| 2662 event = Fmake_event (Qnil, Qnil); | |
| 2663 | |
| 2664 count = specpdl_depth (); | |
| 2665 record_unwind_protect (sit_for_unwind, | |
| 2666 timeout_enabled ? make_int (timeout_id) : Qnil); | |
| 1268 | 2667 recursive_sit_for = 1; |
| 428 | 2668 |
| 2669 while (!done && | |
| 2670 ((NILP (process) && timeout_enabled) || | |
| 2671 (NILP (process) && event_stream_event_pending_p (0)) || | |
| 2672 (!NILP (process)))) | |
| 2673 /* Calling detect_input_pending() is the wrong thing here, because | |
| 2674 that considers the Vunread_command_events and command_event_queue. | |
| 2675 We don't need to look at the command_event_queue because we are | |
| 2676 only interested in process events, which don't go on that. In | |
| 2677 fact, we can't read from it anyway, because we put stuff on it. | |
| 2678 | |
| 2679 Note that event_stream->event_pending_p must be called in such | |
| 2680 a way that it says whether any events *of any kind* are ready, | |
| 2681 not just user events, or (accept-process-output nil) will fail | |
| 2682 to dispatch any process events that may be on the queue. It is | |
| 2683 not clear to me that this is important, because the top-level | |
| 2684 loop will process it, and I don't think that there is ever a | |
| 2685 time when one calls accept-process-output with a nil argument | |
| 2686 and really need the processes to be handled. */ | |
| 2687 { | |
| 2688 /* If our timeout has arrived, we move along. */ | |
| 2689 if (timeout_enabled && !event_stream_wakeup_pending_p (timeout_id, 0)) | |
| 2690 { | |
| 2691 timeout_enabled = 0; | |
| 2692 done = 1; /* We're done. */ | |
| 2693 continue; /* Don't call next_event_internal */ | |
| 2694 } | |
| 2695 | |
| 2696 next_event_internal (event, 0); | |
| 2697 switch (XEVENT_TYPE (event)) | |
| 2698 { | |
| 2699 case process_event: | |
| 2700 { | |
| 2701 if (NILP (process) || | |
| 1204 | 2702 EQ (XEVENT_PROCESS_PROCESS (event), process)) |
| 428 | 2703 { |
| 2704 done = 1; | |
| 2705 /* RMS's version always returns nil when proc is nil, | |
| 2706 and only returns t if input ever arrived on proc. */ | |
| 2707 result = Qt; | |
| 2708 } | |
| 2709 | |
| 2710 execute_internal_event (event); | |
| 2711 break; | |
| 2712 } | |
| 2713 case timeout_event: | |
| 2714 /* We execute the event even if it's ours, and notice that it's | |
| 2715 happened above. */ | |
| 2716 case pointer_motion_event: | |
| 2717 case magic_event: | |
| 2718 { | |
| 2719 execute_internal_event (event); | |
| 2720 break; | |
| 2721 } | |
| 2722 default: | |
| 2723 { | |
| 2724 enqueue_command_event_1 (event); | |
| 2725 break; | |
| 2726 } | |
| 2727 } | |
| 2728 } | |
| 2729 | |
| 771 | 2730 unbind_to_1 (count, timeout_enabled ? make_int (timeout_id) : Qnil); |
| 428 | 2731 |
| 2732 Fdeallocate_event (event); | |
| 853 | 2733 |
| 2734 status_notify (); | |
| 2735 | |
| 428 | 2736 UNGCPRO; |
| 2737 current_buffer = old_buffer; | |
| 2738 return result; | |
| 2739 } | |
| 2740 | |
| 2741 DEFUN ("sleep-for", Fsleep_for, 1, 1, 0, /* | |
| 444 | 2742 Pause, without updating display, for SECONDS seconds. |
| 2743 SECONDS may be a float, allowing pauses for fractional parts of a second. | |
| 428 | 2744 |
| 2745 It is recommended that you never call sleep-for from inside of a process | |
| 444 | 2746 filter function or timer event (either synchronous or asynchronous). |
| 428 | 2747 */ |
| 2748 (seconds)) | |
| 2749 { | |
| 2750 /* This function can GC */ | |
| 2751 unsigned long msecs = lisp_number_to_milliseconds (seconds, 1); | |
| 2752 int id; | |
| 2753 Lisp_Object event = Qnil; | |
| 2754 int count; | |
| 2755 struct gcpro gcpro1; | |
| 2756 | |
| 2757 GCPRO1 (event); | |
| 2758 | |
| 2759 id = event_stream_generate_wakeup (msecs, 0, Qnil, Qnil, 0); | |
| 2760 event = Fmake_event (Qnil, Qnil); | |
| 2761 | |
| 2762 count = specpdl_depth (); | |
| 2763 record_unwind_protect (sit_for_unwind, make_int (id)); | |
| 1268 | 2764 recursive_sit_for = 1; |
| 428 | 2765 |
| 2766 while (1) | |
| 2767 { | |
| 2768 /* If our timeout has arrived, we move along. */ | |
| 2769 if (!event_stream_wakeup_pending_p (id, 0)) | |
| 2770 goto DONE_LABEL; | |
| 2771 | |
| 2772 /* We're a generator of the command_event_queue, so we can't be a | |
| 2773 consumer as well. We don't care about command and eval-events | |
| 2774 anyway. | |
| 2775 */ | |
| 2776 next_event_internal (event, 0); /* blocks */ | |
| 2777 switch (XEVENT_TYPE (event)) | |
| 2778 { | |
| 2779 case timeout_event: | |
| 2780 /* We execute the event even if it's ours, and notice that it's | |
| 2781 happened above. */ | |
| 2782 case process_event: | |
| 2783 case pointer_motion_event: | |
| 2784 case magic_event: | |
| 2785 { | |
| 2786 execute_internal_event (event); | |
| 2787 break; | |
| 2788 } | |
| 2789 default: | |
| 2790 { | |
| 2791 enqueue_command_event_1 (event); | |
| 2792 break; | |
| 2793 } | |
| 2794 } | |
| 2795 } | |
| 2796 DONE_LABEL: | |
| 771 | 2797 unbind_to_1 (count, make_int (id)); |
| 428 | 2798 Fdeallocate_event (event); |
| 2799 UNGCPRO; | |
| 2800 return Qnil; | |
| 2801 } | |
| 2802 | |
| 2803 DEFUN ("sit-for", Fsit_for, 1, 2, 0, /* | |
| 444 | 2804 Perform redisplay, then wait SECONDS seconds or until user input is available. |
| 2805 SECONDS may be a float, meaning a fractional part of a second. | |
| 2806 Optional second arg NODISPLAY non-nil means don't redisplay; just wait. | |
| 428 | 2807 Redisplay is preempted as always if user input arrives, and does not |
| 2808 happen if input is available before it starts. | |
| 2809 Value is t if waited the full time with no input arriving. | |
| 2810 | |
| 2811 If sit-for is called from within a process filter function or timer | |
| 2812 event (either synchronous or asynchronous) it will return immediately. | |
| 2813 */ | |
| 2814 (seconds, nodisplay)) | |
| 2815 { | |
| 2816 /* This function can GC */ | |
| 2817 unsigned long msecs = lisp_number_to_milliseconds (seconds, 1); | |
| 2818 Lisp_Object event, result; | |
| 2819 struct gcpro gcpro1; | |
| 2820 int id; | |
| 2821 int count; | |
| 2822 | |
| 2823 /* The unread-command-events count as pending input */ | |
| 2824 if (!NILP (Vunread_command_events) || !NILP (Vunread_command_event)) | |
| 2825 return Qnil; | |
| 2826 | |
| 2827 /* If the command-builder already has user-input on it (not eval events) | |
| 2828 then that means we're done too. | |
| 2829 */ | |
| 2830 if (!NILP (command_event_queue)) | |
| 2831 { | |
| 2832 EVENT_CHAIN_LOOP (event, command_event_queue) | |
| 2833 { | |
| 2834 if (command_event_p (event)) | |
| 2835 return Qnil; | |
| 2836 } | |
| 2837 } | |
| 2838 | |
| 2839 /* If we're in a macro, or noninteractive, or early in temacs, then | |
| 2840 don't wait. */ | |
| 2841 if (noninteractive || !NILP (Vexecuting_macro)) | |
| 2842 return Qnil; | |
| 2843 | |
| 2844 /* Recursive call from a filter function or timeout handler. */ | |
| 1268 | 2845 if (recursive_sit_for) |
| 428 | 2846 { |
| 2847 if (!event_stream_event_pending_p (1) && NILP (nodisplay)) | |
| 2848 redisplay (); | |
| 2849 return Qnil; | |
| 2850 } | |
| 2851 | |
| 2852 | |
| 2853 /* Otherwise, start reading events from the event_stream. | |
| 2854 Do this loop at least once even if (sit-for 0) so that we | |
| 2855 redisplay when no input pending. | |
| 2856 */ | |
| 2857 GCPRO1 (event); | |
| 2858 event = Fmake_event (Qnil, Qnil); | |
| 2859 | |
| 2860 /* Generate the wakeup even if MSECS is 0, so that existing timeout/etc. | |
| 2861 events get processed. The old (pre-19.12) code special-cased this | |
| 2862 and didn't generate a wakeup, but the resulting behavior was less than | |
| 2863 ideal; viz. the occurrence of (sit-for 0.001) scattered throughout | |
| 2864 the E-Lisp universe. */ | |
| 2865 | |
| 2866 id = event_stream_generate_wakeup (msecs, 0, Qnil, Qnil, 0); | |
| 2867 | |
| 2868 count = specpdl_depth (); | |
| 2869 record_unwind_protect (sit_for_unwind, make_int (id)); | |
| 1268 | 2870 recursive_sit_for = 1; |
| 428 | 2871 |
| 2872 while (1) | |
| 2873 { | |
| 2874 /* If there is no user input pending, then redisplay. | |
| 2875 */ | |
| 2876 if (!event_stream_event_pending_p (1) && NILP (nodisplay)) | |
| 2877 redisplay (); | |
| 2878 | |
| 2879 /* If our timeout has arrived, we move along. */ | |
| 2880 if (!event_stream_wakeup_pending_p (id, 0)) | |
| 2881 { | |
| 2882 result = Qt; | |
| 2883 goto DONE_LABEL; | |
| 2884 } | |
| 2885 | |
| 2886 /* We're a generator of the command_event_queue, so we can't be a | |
| 2887 consumer as well. In fact, we know there's nothing on the | |
| 2888 command_event_queue that we didn't just put there. | |
| 2889 */ | |
| 2890 next_event_internal (event, 0); /* blocks */ | |
| 2891 | |
| 2892 if (command_event_p (event)) | |
| 2893 { | |
| 2894 result = Qnil; | |
| 2895 goto DONE_LABEL; | |
| 2896 } | |
| 2897 switch (XEVENT_TYPE (event)) | |
| 2898 { | |
| 2899 case eval_event: | |
| 2900 { | |
| 2901 /* eval-events get delayed until later. */ | |
| 2902 enqueue_command_event (Fcopy_event (event, Qnil)); | |
| 2903 break; | |
| 2904 } | |
| 2905 | |
| 2906 case timeout_event: | |
| 2907 /* We execute the event even if it's ours, and notice that it's | |
| 2908 happened above. */ | |
| 2909 default: | |
| 2910 { | |
| 2911 execute_internal_event (event); | |
| 2912 break; | |
| 2913 } | |
| 2914 } | |
| 2915 } | |
| 2916 | |
| 2917 DONE_LABEL: | |
| 771 | 2918 unbind_to_1 (count, make_int (id)); |
| 428 | 2919 |
| 2920 /* Put back the event (if any) that made Fsit_for() exit before the | |
| 2921 timeout. Note that it is being added to the back of the queue, which | |
| 2922 would be inappropriate if there were any user events on the queue | |
| 2923 already: we would be misordering them. But we know that there are | |
| 2924 no user-events on the queue, or else we would not have reached this | |
| 2925 point at all. | |
| 2926 */ | |
| 2927 if (NILP (result)) | |
| 2928 enqueue_command_event (event); | |
| 2929 else | |
| 2930 Fdeallocate_event (event); | |
| 2931 | |
| 2932 UNGCPRO; | |
| 2933 return result; | |
| 2934 } | |
| 2935 | |
| 442 | 2936 /* This handy little function is used by select-x.c to wait for replies |
| 2937 from processes that aren't really processes (e.g. the X server) */ | |
| 428 | 2938 void |
| 2939 wait_delaying_user_input (int (*predicate) (void *arg), void *predicate_arg) | |
| 2940 { | |
| 2941 /* This function can GC */ | |
| 2942 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 2943 struct gcpro gcpro1; | |
| 2944 GCPRO1 (event); | |
| 2945 | |
| 2946 while (!(*predicate) (predicate_arg)) | |
| 2947 { | |
| 2948 /* We're a generator of the command_event_queue, so we can't be a | |
| 2949 consumer as well. Also, we have no reason to consult the | |
| 2950 command_event_queue; there are only user and eval-events there, | |
| 2951 and we'd just have to put them back anyway. | |
| 2952 */ | |
| 2953 next_event_internal (event, 0); | |
| 2954 if (command_event_p (event) | |
| 2955 || (XEVENT_TYPE (event) == eval_event) | |
| 2956 || (XEVENT_TYPE (event) == magic_eval_event)) | |
| 2957 enqueue_command_event_1 (event); | |
| 2958 else | |
| 2959 execute_internal_event (event); | |
| 2960 } | |
| 2961 UNGCPRO; | |
| 2962 } | |
| 2963 | |
| 2964 | |
| 2965 /**********************************************************************/ | |
| 2966 /* dispatching events; command builder */ | |
| 2967 /**********************************************************************/ | |
| 2968 | |
| 2969 static void | |
| 2970 execute_internal_event (Lisp_Object event) | |
| 2971 { | |
| 1292 | 2972 PROFILE_DECLARE (); |
| 2973 | |
| 428 | 2974 /* events on dead channels get silently eaten */ |
| 2975 if (object_dead_p (XEVENT (event)->channel)) | |
| 2976 return; | |
| 2977 | |
| 1292 | 2978 PROFILE_RECORD_ENTERING_SECTION (QSexecute_internal_event); |
| 2979 | |
| 428 | 2980 /* This function can GC */ |
| 2981 switch (XEVENT_TYPE (event)) | |
| 2982 { | |
| 2983 case empty_event: | |
| 1292 | 2984 goto done; |
| 428 | 2985 |
| 2986 case eval_event: | |
| 2987 { | |
| 1204 | 2988 call1 (XEVENT_EVAL_FUNCTION (event), |
| 2989 XEVENT_EVAL_OBJECT (event)); | |
| 1292 | 2990 goto done; |
| 428 | 2991 } |
| 2992 | |
| 2993 case magic_eval_event: | |
| 2994 { | |
| 1204 | 2995 XEVENT_MAGIC_EVAL_INTERNAL_FUNCTION (event) |
| 2996 XEVENT_MAGIC_EVAL_OBJECT (event); | |
| 1292 | 2997 goto done; |
| 428 | 2998 } |
| 2999 | |
| 3000 case pointer_motion_event: | |
| 3001 { | |
| 3002 if (!NILP (Vmouse_motion_handler)) | |
| 3003 call1 (Vmouse_motion_handler, event); | |
| 1292 | 3004 goto done; |
| 428 | 3005 } |
| 3006 | |
| 3007 case process_event: | |
| 3008 { | |
| 1204 | 3009 Lisp_Object p = XEVENT_PROCESS_PROCESS (event); |
| 428 | 3010 Charcount readstatus; |
| 853 | 3011 int iter; |
| 3012 | |
| 3013 assert (PROCESSP (p)); | |
| 3014 for (iter = 0; iter < 2; iter++) | |
| 3015 { | |
| 3016 if (iter == 1 && !process_has_separate_stderr (p)) | |
| 3017 break; | |
| 3018 while ((readstatus = read_process_output (p, iter)) > 0) | |
| 3019 ; | |
| 3020 if (readstatus > 0) | |
| 3021 ; /* this clauses never gets executed but | |
| 3022 allows the #ifdefs to work cleanly. */ | |
| 428 | 3023 #ifdef EWOULDBLOCK |
| 853 | 3024 else if (readstatus == -1 && errno == EWOULDBLOCK) |
| 3025 ; | |
| 428 | 3026 #endif /* EWOULDBLOCK */ |
| 3027 #ifdef EAGAIN | |
| 853 | 3028 else if (readstatus == -1 && errno == EAGAIN) |
| 3029 ; | |
| 428 | 3030 #endif /* EAGAIN */ |
| 853 | 3031 else if ((readstatus == 0 && |
| 3032 /* Note that we cannot distinguish between no input | |
| 3033 available now and a closed pipe. | |
| 3034 With luck, a closed pipe will be accompanied by | |
| 3035 subprocess termination and SIGCHLD. */ | |
| 3036 (!network_connection_p (p) || | |
| 3037 /* | |
| 3038 When connected to ToolTalk (i.e. | |
| 3039 connected_via_filedesc_p()), it's not possible to | |
| 3040 reliably determine whether there is a message | |
| 3041 waiting for ToolTalk to receive. ToolTalk expects | |
| 3042 to have tt_message_receive() called exactly once | |
| 3043 every time the file descriptor becomes active, so | |
| 3044 the filter function forces this by returning 0. | |
| 3045 Emacs must not interpret this as a closed pipe. */ | |
| 3046 connected_via_filedesc_p (XPROCESS (p)))) | |
| 3047 | |
| 3048 /* On some OSs with ptys, when the process on one end of | |
| 3049 a pty exits, the other end gets an error reading with | |
| 3050 errno = EIO instead of getting an EOF (0 bytes read). | |
| 3051 Therefore, if we get an error reading and errno = | |
| 3052 EIO, just continue, because the child process has | |
| 3053 exited and should clean itself up soon (e.g. when we | |
| 3054 get a SIGCHLD). */ | |
| 535 | 3055 #ifdef EIO |
| 853 | 3056 || (readstatus == -1 && errno == EIO) |
| 428 | 3057 #endif |
| 535 | 3058 |
| 853 | 3059 ) |
| 3060 { | |
| 3061 /* Currently, we rely on SIGCHLD to indicate that the | |
| 3062 process has terminated. Unfortunately, on some systems | |
| 3063 the SIGCHLD gets missed some of the time. So we put an | |
| 3064 additional check in status_notify() to see whether a | |
| 3065 process has terminated. We must tell status_notify() | |
| 3066 to enable that check, and we do so now. */ | |
| 3067 kick_status_notify (); | |
| 3068 } | |
| 898 | 3069 else |
| 3070 { | |
| 3071 /* Deactivate network connection */ | |
| 3072 Lisp_Object status = Fprocess_status (p); | |
| 3073 if (EQ (status, Qopen) | |
| 3074 /* In case somebody changes the theory of whether to | |
| 3075 return open as opposed to run for network connection | |
| 3076 "processes"... */ | |
| 3077 || EQ (status, Qrun)) | |
| 3078 update_process_status (p, Qexit, 256, 0); | |
| 3079 deactivate_process (p); | |
| 3080 status_notify (); | |
| 3081 } | |
| 853 | 3082 |
| 3083 /* We must call status_notify here to allow the | |
| 3084 event_stream->unselect_process_cb to be run if appropriate. | |
| 3085 Otherwise, dead fds may be selected for, and we will get a | |
| 3086 continuous stream of process events for them. Since we don't | |
| 3087 return until all process events have been flushed, we would | |
| 3088 get stuck here, processing events on a process whose status | |
| 3025 | 3089 was `exit'. Call this after dispatch-event, or the fds will |
| 853 | 3090 have been closed before we read the last data from them. |
| 3091 It's safe for the filter to signal an error because | |
| 3092 status_notify() will be called on return to top-level. | |
| 3093 */ | |
| 3094 status_notify (); | |
| 428 | 3095 } |
| 1292 | 3096 goto done; |
| 428 | 3097 } |
| 3098 | |
| 3099 case timeout_event: | |
| 3100 { | |
| 440 | 3101 Lisp_Event *e = XEVENT (event); |
| 934 | 3102 |
| 1204 | 3103 if (!NILP (EVENT_TIMEOUT_FUNCTION (e))) |
| 3104 call1 (EVENT_TIMEOUT_FUNCTION (e), | |
| 3105 EVENT_TIMEOUT_OBJECT (e)); | |
| 1292 | 3106 goto done; |
| 428 | 3107 } |
| 3108 case magic_event: | |
| 3109 event_stream_handle_magic_event (XEVENT (event)); | |
| 1292 | 3110 goto done; |
| 428 | 3111 default: |
| 2500 | 3112 ABORT (); |
| 428 | 3113 } |
| 1292 | 3114 |
| 3115 done: | |
| 3116 PROFILE_RECORD_EXITING_SECTION (QSexecute_internal_event); | |
| 428 | 3117 } |
| 3118 | |
| 3119 | |
| 3120 | |
| 3121 static void | |
| 3122 this_command_keys_replace_suffix (Lisp_Object suffix, Lisp_Object chain) | |
| 3123 { | |
| 3124 Lisp_Object first_before_suffix = | |
| 3125 event_chain_find_previous (Vthis_command_keys, suffix); | |
| 3126 | |
| 3127 if (NILP (first_before_suffix)) | |
| 3128 Vthis_command_keys = chain; | |
| 3129 else | |
| 3130 XSET_EVENT_NEXT (first_before_suffix, chain); | |
| 3131 deallocate_event_chain (suffix); | |
| 3132 Vthis_command_keys_tail = event_chain_tail (chain); | |
| 3133 } | |
| 3134 | |
| 3135 static void | |
| 3136 command_builder_replace_suffix (struct command_builder *builder, | |
| 3137 Lisp_Object suffix, Lisp_Object chain) | |
| 3138 { | |
| 3139 Lisp_Object first_before_suffix = | |
| 3140 event_chain_find_previous (builder->current_events, suffix); | |
| 3141 | |
| 3142 if (NILP (first_before_suffix)) | |
| 3143 builder->current_events = chain; | |
| 3144 else | |
| 3145 XSET_EVENT_NEXT (first_before_suffix, chain); | |
| 3146 deallocate_event_chain (suffix); | |
| 3147 builder->most_current_event = event_chain_tail (chain); | |
| 3148 } | |
| 3149 | |
| 3150 static Lisp_Object | |
| 3151 command_builder_find_leaf_1 (struct command_builder *builder) | |
| 3152 { | |
| 3153 Lisp_Object event0 = builder->current_events; | |
| 3154 | |
| 3155 if (NILP (event0)) | |
| 3156 return Qnil; | |
| 3157 | |
| 3158 return event_binding (event0, 1); | |
| 3159 } | |
| 3160 | |
| 1268 | 3161 static void |
| 3162 maybe_kbd_translate (Lisp_Object event) | |
| 3163 { | |
| 3164 Ichar c; | |
| 3165 int did_translate = 0; | |
| 3166 | |
| 3167 if (XEVENT_TYPE (event) != key_press_event) | |
| 3168 return; | |
| 3169 if (!HASH_TABLEP (Vkeyboard_translate_table)) | |
| 3170 return; | |
| 3171 if (EQ (Fhash_table_count (Vkeyboard_translate_table), Qzero)) | |
| 3172 return; | |
| 3173 | |
| 2828 | 3174 c = event_to_character (event, 0, 0); |
| 1268 | 3175 if (c != -1) |
| 3176 { | |
| 3177 Lisp_Object traduit = Fgethash (make_char (c), Vkeyboard_translate_table, | |
| 3178 Qnil); | |
| 3179 if (!NILP (traduit) && SYMBOLP (traduit)) | |
| 3180 { | |
| 3181 XSET_EVENT_KEY_KEYSYM (event, traduit); | |
| 3182 XSET_EVENT_KEY_MODIFIERS (event, 0); | |
| 3183 did_translate = 1; | |
| 3184 } | |
| 3185 else if (CHARP (traduit)) | |
| 3186 { | |
| 3187 /* This used to call Fcharacter_to_event() directly into EVENT, | |
| 3188 but that can eradicate timestamps and other such stuff. | |
| 3189 This way is safer. */ | |
| 3190 Lisp_Object ev2 = Fmake_event (Qnil, Qnil); | |
| 3191 | |
| 3192 character_to_event (XCHAR (traduit), XEVENT (ev2), | |
|
4780
2fd201d73a92
Call character_to_event on characters received from XIM, event-Xt.c
Aidan Kehoe <kehoea@parhasard.net>
parents:
4775
diff
changeset
|
3193 XCONSOLE (XEVENT_CHANNEL (event)), |
|
2fd201d73a92
Call character_to_event on characters received from XIM, event-Xt.c
Aidan Kehoe <kehoea@parhasard.net>
parents:
4775
diff
changeset
|
3194 high_bit_is_meta, 1); |
| 1268 | 3195 XSET_EVENT_KEY_KEYSYM (event, XEVENT_KEY_KEYSYM (ev2)); |
| 3196 XSET_EVENT_KEY_MODIFIERS (event, XEVENT_KEY_MODIFIERS (ev2)); | |
| 3197 Fdeallocate_event (ev2); | |
| 3198 did_translate = 1; | |
| 3199 } | |
| 3200 } | |
| 3201 | |
| 3202 if (!did_translate) | |
| 3203 { | |
| 3204 Lisp_Object traduit = Fgethash (XEVENT_KEY_KEYSYM (event), | |
| 3205 Vkeyboard_translate_table, Qnil); | |
| 3206 if (!NILP (traduit) && SYMBOLP (traduit)) | |
| 3207 { | |
| 3208 XSET_EVENT_KEY_KEYSYM (event, traduit); | |
| 3209 did_translate = 1; | |
| 3210 } | |
| 3211 else if (CHARP (traduit)) | |
| 3212 { | |
| 3213 /* This used to call Fcharacter_to_event() directly into EVENT, | |
| 3214 but that can eradicate timestamps and other such stuff. | |
| 3215 This way is safer. */ | |
| 3216 Lisp_Object ev2 = Fmake_event (Qnil, Qnil); | |
| 3217 | |
| 3218 character_to_event (XCHAR (traduit), XEVENT (ev2), | |
|
4780
2fd201d73a92
Call character_to_event on characters received from XIM, event-Xt.c
Aidan Kehoe <kehoea@parhasard.net>
parents:
4775
diff
changeset
|
3219 XCONSOLE (XEVENT_CHANNEL (event)), |
|
2fd201d73a92
Call character_to_event on characters received from XIM, event-Xt.c
Aidan Kehoe <kehoea@parhasard.net>
parents:
4775
diff
changeset
|
3220 high_bit_is_meta, 1); |
| 1268 | 3221 XSET_EVENT_KEY_KEYSYM (event, XEVENT_KEY_KEYSYM (ev2)); |
| 3222 XSET_EVENT_KEY_MODIFIERS (event, | |
| 3223 XEVENT_KEY_MODIFIERS (event) | | |
| 3224 XEVENT_KEY_MODIFIERS (ev2)); | |
| 3225 | |
| 3226 Fdeallocate_event (ev2); | |
| 3227 did_translate = 1; | |
| 3228 } | |
| 3229 } | |
| 3230 | |
| 3231 #ifdef DEBUG_XEMACS | |
| 3232 if (did_translate) | |
| 3233 DEBUG_PRINT_EMACS_EVENT ("->keyboard-translate-table", event); | |
| 3234 #endif | |
| 3235 } | |
| 3236 | |
| 428 | 3237 /* See if we can do function-key-map or key-translation-map translation |
| 3238 on the current events in the command builder. If so, do this, and | |
| 771 | 3239 return the resulting binding, if any. |
| 3240 | |
| 3241 DID_MUNGE must be initialized before calling this function. If munging | |
| 3242 happened, DID_MUNGE will be non-zero; otherwise, it will be left alone. | |
| 3243 */ | |
| 428 | 3244 |
| 3245 static Lisp_Object | |
| 3246 munge_keymap_translate (struct command_builder *builder, | |
| 3247 enum munge_me_out_the_door munge, | |
| 771 | 3248 int has_normal_binding_p, int *did_munge) |
| 428 | 3249 { |
| 3250 Lisp_Object suffix; | |
| 3251 | |
| 1204 | 3252 EVENT_CHAIN_LOOP (suffix, builder->first_mungeable_event[munge]) |
| 428 | 3253 { |
| 3254 Lisp_Object result = munging_key_map_event_binding (suffix, munge); | |
| 3255 | |
| 3256 if (NILP (result)) | |
| 3257 continue; | |
| 3258 | |
| 3259 if (KEYMAPP (result)) | |
| 3260 { | |
| 3261 if (NILP (builder->last_non_munged_event) | |
| 3262 && !has_normal_binding_p) | |
| 3263 builder->last_non_munged_event = builder->most_current_event; | |
| 3264 } | |
| 3265 else | |
| 3266 builder->last_non_munged_event = Qnil; | |
| 3267 | |
| 3268 if (!KEYMAPP (result) && | |
| 3269 !VECTORP (result) && | |
| 3270 !STRINGP (result)) | |
| 3271 { | |
| 3272 struct gcpro gcpro1; | |
| 3273 GCPRO1 (suffix); | |
| 3274 result = call1 (result, Qnil); | |
| 3275 UNGCPRO; | |
| 3276 if (NILP (result)) | |
| 3277 return Qnil; | |
| 3278 } | |
| 3279 | |
| 3280 if (KEYMAPP (result)) | |
| 3281 return result; | |
| 3282 | |
| 3283 if (VECTORP (result) || STRINGP (result)) | |
| 3284 { | |
| 3285 Lisp_Object new_chain = key_sequence_to_event_chain (result); | |
| 3286 Lisp_Object tempev; | |
| 3287 | |
| 3288 /* If the first_mungeable_event of the other munger is | |
| 3289 within the events we're munging, then it will point to | |
| 3290 deallocated events afterwards, which is bad -- so make it | |
| 3291 point at the beginning of the munged events. */ | |
| 3292 EVENT_CHAIN_LOOP (tempev, suffix) | |
| 3293 { | |
| 3294 Lisp_Object *mungeable_event = | |
| 1204 | 3295 &builder->first_mungeable_event[1 - munge]; |
| 428 | 3296 if (EQ (tempev, *mungeable_event)) |
| 3297 { | |
| 3298 *mungeable_event = new_chain; | |
| 3299 break; | |
| 3300 } | |
| 3301 } | |
| 3302 | |
| 771 | 3303 /* Now munge the current event chain in the command builder. */ |
| 428 | 3304 command_builder_replace_suffix (builder, suffix, new_chain); |
| 1204 | 3305 builder->first_mungeable_event[munge] = Qnil; |
| 771 | 3306 |
| 3307 *did_munge = 1; | |
| 428 | 3308 |
| 793 | 3309 return command_builder_find_leaf_1 (builder); |
| 428 | 3310 } |
| 3311 | |
| 563 | 3312 signal_error (Qinvalid_key_binding, |
| 3313 (munge == MUNGE_ME_FUNCTION_KEY ? | |
| 3314 "Invalid binding in function-key-map" : | |
| 3315 "Invalid binding in key-translation-map"), | |
| 3316 result); | |
| 428 | 3317 } |
| 3318 | |
| 3319 return Qnil; | |
| 3320 } | |
| 3321 | |
| 2828 | 3322 /* Same as command_builder_find_leaf() below, but without offering the |
| 3323 platform-specific event code the opportunity to give a default binding of | |
| 3324 an unseen keysym to self-insert-command, and without the fallback to | |
| 3325 other keymaps for lookups that allows someone with a Cyrillic keyboard | |
| 3326 to pretend it's Qwerty for C-x C-f, for example. */ | |
| 771 | 3327 |
| 428 | 3328 static Lisp_Object |
| 2828 | 3329 command_builder_find_leaf_no_jit_binding (struct command_builder *builder, |
| 771 | 3330 int allow_misc_user_events_p, |
| 3331 int *did_munge) | |
| 428 | 3332 { |
| 3333 /* This function can GC */ | |
| 3334 Lisp_Object result; | |
| 3335 Lisp_Object evee = builder->current_events; | |
| 3336 | |
| 3337 if (XEVENT_TYPE (evee) == misc_user_event) | |
| 3338 { | |
| 3339 if (allow_misc_user_events_p && (NILP (XEVENT_NEXT (evee)))) | |
| 1204 | 3340 return list2 (XEVENT_EVAL_FUNCTION (evee), |
| 3341 XEVENT_EVAL_OBJECT (evee)); | |
| 428 | 3342 else |
| 3343 return Qnil; | |
| 3344 } | |
| 3345 | |
| 442 | 3346 /* if we're currently in a menu accelerator, check there for further |
| 3347 events */ | |
| 3348 /* #### fuck me! who wrote this crap? think "abstraction", baby. */ | |
| 771 | 3349 /* #### this horribly-written crap can mess with global state, which |
| 3350 this function should not do. i'm not fixing it now. someone | |
| 3351 needs to go and rewrite that shit correctly. --ben */ | |
| 1268 | 3352 #if defined (HAVE_X_WINDOWS) && defined (LWLIB_MENUBARS_LUCID) |
| 442 | 3353 if (x_kludge_lw_menu_active ()) |
| 428 | 3354 { |
| 3355 return command_builder_operate_menu_accelerator (builder); | |
| 3356 } | |
| 3357 else | |
| 3358 { | |
| 3359 result = Qnil; | |
| 3360 if (EQ (Vmenu_accelerator_enabled, Qmenu_force)) | |
| 3361 result = command_builder_find_menu_accelerator (builder); | |
| 3362 if (NILP (result)) | |
| 3363 #endif | |
| 3364 result = command_builder_find_leaf_1 (builder); | |
| 1268 | 3365 #if defined (HAVE_X_WINDOWS) && defined (LWLIB_MENUBARS_LUCID) |
| 428 | 3366 if (NILP (result) |
| 3367 && EQ (Vmenu_accelerator_enabled, Qmenu_fallback)) | |
| 3368 result = command_builder_find_menu_accelerator (builder); | |
| 3369 } | |
| 3370 #endif | |
| 3371 | |
| 3372 /* Check to see if we have a potential function-key-map match. */ | |
| 3373 if (NILP (result)) | |
| 771 | 3374 result = munge_keymap_translate (builder, MUNGE_ME_FUNCTION_KEY, 0, |
| 3375 did_munge); | |
| 3376 | |
| 428 | 3377 /* Check to see if we have a potential key-translation-map match. */ |
| 3378 { | |
| 3379 Lisp_Object key_translate_result = | |
| 3380 munge_keymap_translate (builder, MUNGE_ME_KEY_TRANSLATION, | |
| 771 | 3381 !NILP (result), did_munge); |
| 428 | 3382 if (!NILP (key_translate_result)) |
| 771 | 3383 result = key_translate_result; |
| 428 | 3384 } |
| 3385 | |
| 3386 if (!NILP (result)) | |
| 3387 return result; | |
| 3388 | |
| 3389 /* If key-sequence wasn't bound, we'll try some fallbacks. */ | |
| 3390 | |
| 3391 /* If we didn't find a binding, and the last event in the sequence is | |
| 3392 a shifted character, then try again with the lowercase version. */ | |
| 3393 | |
| 3394 if (XEVENT_TYPE (builder->most_current_event) == key_press_event | |
| 3395 && !NILP (Vretry_undefined_key_binding_unshifted)) | |
| 3396 { | |
| 1204 | 3397 if (event_upshifted_p (builder->most_current_event)) |
| 428 | 3398 { |
| 771 | 3399 Lisp_Object neubauten = copy_command_builder (builder, 0); |
| 3400 struct command_builder *neub = XCOMMAND_BUILDER (neubauten); | |
| 3401 struct gcpro gcpro1; | |
| 3402 | |
| 3403 GCPRO1 (neubauten); | |
| 1204 | 3404 downshift_event (event_chain_tail (neub->current_events)); |
| 771 | 3405 result = |
| 2828 | 3406 command_builder_find_leaf_no_jit_binding |
| 771 | 3407 (neub, allow_misc_user_events_p, did_munge); |
| 3408 | |
| 428 | 3409 if (!NILP (result)) |
| 771 | 3410 { |
| 3411 copy_command_builder (neub, builder); | |
| 3412 *did_munge = 1; | |
| 3413 } | |
| 3414 free_command_builder (neub); | |
| 3415 UNGCPRO; | |
| 3416 if (!NILP (result)) | |
| 428 | 3417 return result; |
| 3418 } | |
| 3419 } | |
| 3420 | |
| 3421 /* help-char is `auto-bound' in every keymap */ | |
| 3422 if (!NILP (Vprefix_help_command) && | |
| 1204 | 3423 event_matches_key_specifier_p (builder->most_current_event, Vhelp_char)) |
| 428 | 3424 return Vprefix_help_command; |
| 3425 | |
| 771 | 3426 return Qnil; |
| 3427 } | |
| 3428 | |
| 3429 /* Compare the current state of the command builder against the local and | |
| 3430 global keymaps, and return the binding. If there is no match, try again, | |
| 3431 case-insensitively. The return value will be one of: | |
| 3432 -- nil (there is no binding) | |
| 3433 -- a keymap (part of a command has been specified) | |
| 3434 -- a command (anything that satisfies `commandp'; this includes | |
| 3435 some symbols, lists, subrs, strings, vectors, and | |
| 3436 compiled-function objects) | |
| 3437 | |
| 3438 This may "munge" the current event chain in the command builder; | |
| 3439 i.e. the sequence might be mutated into a different sequence, | |
| 3440 which we then pretend is what the user actually typed instead of | |
| 3441 the passed-in sequence. This happens as a result of: | |
| 3442 | |
| 3443 -- key-translation-map changes | |
| 3444 -- function-key-map changes | |
| 3445 -- retry-undefined-key-binding-unshifted (q.v.) | |
| 3446 -- "Russian C-x problem" changes (see definition of struct key_data, | |
| 3447 events.h) | |
| 3448 | |
| 3449 DID_MUNGE must be initialized before calling this function. If munging | |
| 3450 happened, DID_MUNGE will be non-zero; otherwise, it will be left alone. | |
| 2828 | 3451 |
| 3452 (The above was Ben, I think.) | |
| 3453 | |
| 3454 It might be nice to have lookup-key call this function, directly or | |
| 3455 indirectly. Though it is arguably the right thing if lookup-key fails on | |
| 3456 a keysym that the X11 event code hasn't seen. There's no way to know if | |
| 3457 that keysym is generatable by the keyboard until it's generated, | |
| 3458 therefore there's no reasonable expectation that it be bound before it's | |
| 3459 generated--all the other default bindings depend on our knowing the | |
| 3460 keyboard layout and relying on it. And describe-key works without it, so | |
| 3461 I think we're fine. | |
| 3462 | |
| 3463 Some weirdness with this code--try this on a keyboard where X11 will | |
| 3464 produce ediaeresis with dead-diaeresis and e, but it's not produced by | |
| 3465 any other combination of keys on the keyboard; | |
| 3466 | |
| 3467 (defun ding-command () | |
| 3468 (interactive) | |
| 3469 (ding)) | |
| 3470 | |
| 3471 (define-key global-map 'ediaeresis 'ding-command) | |
| 3472 | |
| 3473 Now, pressing dead-diaeresis and then e will ding. Next; | |
| 3474 | |
| 3475 (define-key global-map 'ediaeresis 'self-insert-command) | |
| 3476 | |
| 3477 and press dead-diaeresis and then e. It'll give you "Invalid argument: | |
| 3478 typed key has no ASCII equivalent" Then; | |
| 3479 | |
| 3480 (define-key global-map 'ediaeresis nil) | |
| 3481 | |
| 3482 and press the combination again; it'll self-insert. The moral of the | |
| 3483 story is, if you want to suppress all bindings to a non-ASCII X11 key, | |
| 3484 bind it to a trivial no-op command, because the automatic mapping to | |
| 3485 self-insert-command will happen if there's no existing binding for the | |
| 3486 symbol. I can't see a way around this. -- Aidan Kehoe, 2005-05-14 */ | |
| 771 | 3487 |
| 3488 static Lisp_Object | |
| 3489 command_builder_find_leaf (struct command_builder *builder, | |
| 3490 int allow_misc_user_events_p, | |
| 3491 int *did_munge) | |
| 3492 { | |
| 3493 Lisp_Object result = | |
| 2828 | 3494 command_builder_find_leaf_no_jit_binding |
| 771 | 3495 (builder, allow_misc_user_events_p, did_munge); |
| 2828 | 3496 Lisp_Object event, console, channel, lookup_res; |
| 3497 int redolookup = 0, i; | |
| 771 | 3498 |
| 3499 if (!NILP (result)) | |
| 3500 return result; | |
| 3501 | |
| 2828 | 3502 /* If some of the events are keyboard events, and this is the first time |
| 3503 the platform event code has seen their keysyms--which will be the case | |
| 3504 the first time we see a composed keysym on X11, for example--offer it | |
| 3505 the chance to define them as a self-insert-command, and do the lookup | |
| 3506 again. | |
| 3507 | |
| 3508 This isn't Mule-specific; in a world where x-iso8859-1.el is gone, it's | |
| 3509 needed for non-Mule too. | |
| 3510 | |
| 3511 Probably this can just be limited to the checking the last | |
| 3512 keypress. */ | |
| 3513 | |
| 3514 EVENT_CHAIN_LOOP (event, builder->current_events) | |
| 3515 { | |
| 3516 /* We can ignore key release events because the preceding presses will | |
| 3517 have initiated the mapping. */ | |
| 3518 if (key_press_event != XEVENT_TYPE (event)) | |
| 3519 continue; | |
| 3520 | |
| 3521 channel = XEVENT_CHANNEL (event); | |
| 3522 if (object_dead_p (channel)) | |
| 3523 continue; | |
| 3524 | |
| 3525 console = CDFW_CONSOLE (channel); | |
| 3526 if (NILP (console)) | |
| 3527 console = Vselected_console; | |
| 3528 | |
| 3529 if (CONSOLE_LIVE_P(XCONSOLE(console))) | |
| 3530 { | |
| 3531 lookup_res = MAYBE_LISP_CONMETH(XCONSOLE(console), | |
| 3532 perhaps_init_unseen_key_defaults, | |
| 3533 (XCONSOLE(console), | |
| 3534 XEVENT_KEY_KEYSYM(event))); | |
| 3535 if (EQ(lookup_res, Qt)) | |
| 3536 { | |
| 3537 redolookup += 1; | |
| 3538 } | |
| 3539 } | |
| 3540 } | |
| 3541 | |
| 3542 if (redolookup) | |
| 428 | 3543 { |
| 2828 | 3544 result = command_builder_find_leaf_no_jit_binding |
| 3545 (builder, allow_misc_user_events_p, did_munge); | |
| 3546 if (!NILP (result)) | |
| 3547 { | |
| 3548 return result; | |
| 3549 } | |
| 3550 } | |
| 3551 | |
| 3552 /* The old composed-character-default-binding handling that used to be | |
| 3553 here was wrong--if a user wants to bind a given key to something other | |
| 3554 than self-insert-command, then they should go ahead and do it, we won't | |
| 3555 override it, and the sane thing to do with any key that has a known | |
| 3556 character correspondence is _always_ to default it to | |
| 3557 self-insert-command, nothing else. | |
| 3558 | |
| 3559 I'm adding the variable to control whether "Russian C-x processing" is | |
| 3560 used because I have a feeling that it's not always the most appropriate | |
| 3561 thing to do--in cases where people are using a non-Qwerty | |
| 3562 Roman-alphabet layout, do they really want C-x with some random letter | |
| 3563 to call `switch-to-buffer'? I can imagine that being very confusing, | |
| 3564 certainly for new users, and it might be that defaulting the value for | |
| 3565 `try-alternate-layouts-for-commands' as part of the language | |
| 3566 environment is the right thing to do, only defaulting to `t' for those | |
| 3567 languages that don't use the Roman alphabet. | |
| 3568 | |
| 3569 Much of that reasoning is tentative on my part, and feel free to change | |
| 3570 this code if you have more experience with the problem and an intuition | |
| 3571 that differs from mine. (Aidan Kehoe, 2005-05-29)*/ | |
| 3572 | |
| 3573 if (!try_alternate_layouts_for_commands) | |
| 3574 { | |
| 3575 return Qnil; | |
| 428 | 3576 } |
| 2828 | 3577 |
| 3578 if (key_press_event == XEVENT_TYPE (builder->most_current_event)) | |
| 3579 { | |
| 3580 Lisp_Object ev = builder->most_current_event, newbuilder; | |
| 3581 Ichar this_alternative; | |
| 3582 | |
| 3583 struct command_builder *newb; | |
| 3584 struct gcpro gcpro1; | |
| 3585 | |
| 3586 /* Ignore the value for CURRENT_LANGENV, because we've checked it | |
| 3587 already, above. */ | |
| 3588 for (i = KEYCHAR_CURRENT_LANGENV, ++i; i < KEYCHAR_LAST; ++i) | |
| 3589 { | |
| 3590 this_alternative = XEVENT_KEY_ALT_KEYCHARS(ev, i); | |
| 3591 | |
| 3592 if (0 == this_alternative) | |
| 3593 continue; | |
| 3594 | |
| 3595 newbuilder = copy_command_builder(builder, 0); | |
| 3596 GCPRO1(newbuilder); | |
| 3597 | |
| 3598 newb = XCOMMAND_BUILDER(newbuilder); | |
| 3599 | |
| 2830 | 3600 XSET_EVENT_KEY_KEYSYM(event_chain_tail |
| 3601 (XCOMMAND_BUILDER(newbuilder)->current_events), | |
| 2828 | 3602 make_char(this_alternative)); |
| 3603 | |
| 3604 result = command_builder_find_leaf_no_jit_binding | |
| 3605 (newb, allow_misc_user_events_p, did_munge); | |
| 3606 | |
| 3607 if (!NILP (result)) | |
| 3608 { | |
| 3609 copy_command_builder (newb, builder); | |
| 3610 *did_munge = 1; | |
| 3611 } | |
| 2830 | 3612 else if (event_upshifted_p |
| 3613 (XCOMMAND_BUILDER(newbuilder)->most_current_event) && | |
| 2828 | 3614 !NILP (Vretry_undefined_key_binding_unshifted) |
| 3615 && isascii(this_alternative)) | |
| 3616 { | |
| 2830 | 3617 downshift_event (event_chain_tail |
| 3618 (XCOMMAND_BUILDER(newbuilder)->current_events)); | |
| 3619 XSET_EVENT_KEY_KEYSYM(event_chain_tail | |
| 3620 (newb->current_events), | |
| 2828 | 3621 make_char(tolower(this_alternative))); |
| 3622 result = command_builder_find_leaf_no_jit_binding | |
| 3623 (newb, allow_misc_user_events_p, did_munge); | |
| 3624 } | |
| 3625 | |
| 3626 free_command_builder (newb); | |
| 3627 UNGCPRO; | |
| 3628 | |
| 3629 if (!NILP (result)) | |
| 3630 return result; | |
| 3631 } | |
| 3632 } | |
| 428 | 3633 |
| 3634 return Qnil; | |
| 3635 } | |
| 3636 | |
| 771 | 3637 /* Like command_builder_find_leaf but update this-command-keys and the |
| 3638 echo area as necessary when the current event chain was munged. */ | |
| 3639 | |
| 3640 static Lisp_Object | |
| 3641 command_builder_find_leaf_and_update_global_state (struct command_builder * | |
| 3642 builder, | |
| 3643 int | |
| 3644 allow_misc_user_events_p) | |
| 3645 { | |
| 3646 int did_munge = 0; | |
| 3647 int orig_length = event_chain_count (builder->current_events); | |
| 3648 Lisp_Object result = command_builder_find_leaf (builder, | |
| 3649 allow_misc_user_events_p, | |
| 3650 &did_munge); | |
| 3651 | |
| 3652 if (did_munge) | |
| 3653 { | |
| 3654 int tck_length = event_chain_count (Vthis_command_keys); | |
| 3655 | |
| 3656 /* We just assume that the events we just replaced are | |
| 3657 sitting in copied form at the end of this-command-keys. | |
| 3658 If the user did weird things with `dispatch-event' this | |
| 3659 may not be the case, but at least we make sure we won't | |
| 3660 crash. */ | |
| 3661 | |
| 3662 if (tck_length >= orig_length) | |
| 3663 { | |
| 3664 Lisp_Object new_chain = | |
| 3665 copy_event_chain (builder->current_events); | |
| 3666 this_command_keys_replace_suffix | |
| 3667 (event_chain_nth (Vthis_command_keys, tck_length - orig_length), | |
| 3668 new_chain); | |
| 3669 | |
| 3670 regenerate_echo_keys_from_this_command_keys (builder); | |
| 3671 } | |
| 3672 } | |
| 3673 | |
| 3674 if (NILP (result)) | |
| 3675 { | |
| 3676 /* If we read extra events attempting to match a function key but end | |
| 3677 up failing, then we release those events back to the command loop | |
| 3678 and fail on the original lookup. The released events will then be | |
| 3679 reprocessed in the context of the first part having failed. */ | |
| 3680 if (!NILP (builder->last_non_munged_event)) | |
| 3681 { | |
| 3682 Lisp_Object event0 = builder->last_non_munged_event; | |
| 3683 | |
| 3684 /* Put the commands back on the event queue. */ | |
| 3685 enqueue_event_chain (XEVENT_NEXT (event0), | |
| 3686 &command_event_queue, | |
| 3687 &command_event_queue_tail); | |
| 3688 | |
| 3689 /* Then remove them from the command builder. */ | |
| 3690 XSET_EVENT_NEXT (event0, Qnil); | |
| 3691 builder->most_current_event = event0; | |
| 3692 builder->last_non_munged_event = Qnil; | |
| 3693 } | |
| 3694 } | |
| 3695 | |
| 3696 return result; | |
| 3697 } | |
| 428 | 3698 |
| 3699 /* Every time a command-event (a key, button, or menu selection) is read by | |
| 3700 Fnext_event(), it is stored in the recent_keys_ring, in Vlast_input_event, | |
| 3701 and in Vthis_command_keys. (Eval-events are not stored there.) | |
| 3702 | |
| 3703 Every time a command is invoked, Vlast_command_event is set to the last | |
| 3704 event in the sequence. | |
| 3705 | |
| 3706 This means that Vthis_command_keys is really about "input read since the | |
| 3707 last command was executed" rather than about "what keys invoked this | |
| 3708 command." This is a little counterintuitive, but that's the way it | |
| 3709 has always worked. | |
| 3710 | |
| 3711 As an extra kink, the function read-key-sequence resets/updates the | |
| 3712 last-command-event and this-command-keys. It doesn't append to the | |
| 3713 command-keys as read-char does. Such are the pitfalls of having to | |
| 3714 maintain compatibility with a program for which the only specification | |
| 3715 is the code itself. | |
| 3716 | |
| 3717 (We could implement recent_keys_ring and Vthis_command_keys as the same | |
| 3718 data structure.) | |
| 3719 */ | |
| 3720 | |
| 3721 DEFUN ("recent-keys", Frecent_keys, 0, 1, 0, /* | |
| 3722 Return a vector of recent keyboard or mouse button events read. | |
| 3723 If NUMBER is non-nil, not more than NUMBER events will be returned. | |
| 3724 Change number of events stored using `set-recent-keys-ring-size'. | |
| 3725 | |
| 3726 This copies the event objects into a new vector; it is safe to keep and | |
| 3727 modify them. | |
| 3728 */ | |
| 3729 (number)) | |
| 3730 { | |
| 3731 struct gcpro gcpro1; | |
| 3732 Lisp_Object val = Qnil; | |
| 3733 int nwanted; | |
| 3734 int start, nkeys, i, j; | |
| 3735 GCPRO1 (val); | |
| 3736 | |
| 3737 if (NILP (number)) | |
| 3738 nwanted = recent_keys_ring_size; | |
| 3739 else | |
| 3740 { | |
| 3741 CHECK_NATNUM (number); | |
| 3742 nwanted = XINT (number); | |
| 3743 } | |
| 3744 | |
| 3745 /* Create the keys ring vector, if none present. */ | |
| 3746 if (NILP (Vrecent_keys_ring)) | |
| 3747 { | |
| 3748 Vrecent_keys_ring = make_vector (recent_keys_ring_size, Qnil); | |
| 3749 /* And return nothing in particular. */ | |
| 446 | 3750 RETURN_UNGCPRO (make_vector (0, Qnil)); |
| 428 | 3751 } |
| 3752 | |
| 3753 if (NILP (XVECTOR_DATA (Vrecent_keys_ring)[recent_keys_ring_index])) | |
| 3754 /* This means the vector has not yet wrapped */ | |
| 3755 { | |
| 3756 nkeys = recent_keys_ring_index; | |
| 3757 start = 0; | |
| 3758 } | |
| 3759 else | |
| 3760 { | |
| 3761 nkeys = recent_keys_ring_size; | |
| 3762 start = ((recent_keys_ring_index == nkeys) ? 0 : recent_keys_ring_index); | |
| 3763 } | |
| 3764 | |
| 3765 if (nwanted < nkeys) | |
| 3766 { | |
| 3767 start += nkeys - nwanted; | |
| 3768 if (start >= recent_keys_ring_size) | |
| 3769 start -= recent_keys_ring_size; | |
| 3770 nkeys = nwanted; | |
| 3771 } | |
| 3772 else | |
| 3773 nwanted = nkeys; | |
| 3774 | |
| 3775 val = make_vector (nwanted, Qnil); | |
| 3776 | |
| 3777 for (i = 0, j = start; i < nkeys; i++) | |
| 3778 { | |
| 3779 Lisp_Object e = XVECTOR_DATA (Vrecent_keys_ring)[j]; | |
| 3780 | |
| 3781 if (NILP (e)) | |
| 2500 | 3782 ABORT (); |
| 428 | 3783 XVECTOR_DATA (val)[i] = Fcopy_event (e, Qnil); |
| 3784 if (++j >= recent_keys_ring_size) | |
| 3785 j = 0; | |
| 3786 } | |
| 3787 UNGCPRO; | |
| 3788 return val; | |
| 3789 } | |
| 3790 | |
| 3791 | |
| 3792 DEFUN ("recent-keys-ring-size", Frecent_keys_ring_size, 0, 0, 0, /* | |
| 3793 The maximum number of events `recent-keys' can return. | |
| 3794 */ | |
| 3795 ()) | |
| 3796 { | |
| 3797 return make_int (recent_keys_ring_size); | |
| 3798 } | |
| 3799 | |
| 3800 DEFUN ("set-recent-keys-ring-size", Fset_recent_keys_ring_size, 1, 1, 0, /* | |
| 3801 Set the maximum number of events to be stored internally. | |
| 3802 */ | |
| 3803 (size)) | |
| 3804 { | |
| 3805 Lisp_Object new_vector = Qnil; | |
| 3806 int i, j, nkeys, start, min; | |
| 3807 struct gcpro gcpro1; | |
| 3808 | |
| 3809 CHECK_INT (size); | |
| 3810 if (XINT (size) <= 0) | |
| 563 | 3811 invalid_argument ("Recent keys ring size must be positive", size); |
| 428 | 3812 if (XINT (size) == recent_keys_ring_size) |
| 3813 return size; | |
| 3814 | |
| 446 | 3815 GCPRO1 (new_vector); |
| 428 | 3816 new_vector = make_vector (XINT (size), Qnil); |
| 3817 | |
| 3818 if (NILP (Vrecent_keys_ring)) | |
| 3819 { | |
| 3820 Vrecent_keys_ring = new_vector; | |
| 446 | 3821 RETURN_UNGCPRO (size); |
| 428 | 3822 } |
| 3823 | |
| 3824 if (NILP (XVECTOR_DATA (Vrecent_keys_ring)[recent_keys_ring_index])) | |
| 3825 /* This means the vector has not yet wrapped */ | |
| 3826 { | |
| 3827 nkeys = recent_keys_ring_index; | |
| 3828 start = 0; | |
| 3829 } | |
| 3830 else | |
| 3831 { | |
| 3832 nkeys = recent_keys_ring_size; | |
| 3833 start = ((recent_keys_ring_index == nkeys) ? 0 : recent_keys_ring_index); | |
| 3834 } | |
| 3835 | |
| 3836 if (XINT (size) > nkeys) | |
| 3837 min = nkeys; | |
| 3838 else | |
| 3839 min = XINT (size); | |
| 3840 | |
| 3841 for (i = 0, j = start; i < min; i++) | |
| 3842 { | |
| 3843 XVECTOR_DATA (new_vector)[i] = XVECTOR_DATA (Vrecent_keys_ring)[j]; | |
| 3844 if (++j >= recent_keys_ring_size) | |
| 3845 j = 0; | |
| 3846 } | |
| 3847 recent_keys_ring_size = XINT (size); | |
| 3848 recent_keys_ring_index = (i < recent_keys_ring_size) ? i : 0; | |
| 3849 | |
| 3850 Vrecent_keys_ring = new_vector; | |
| 3851 | |
| 3852 UNGCPRO; | |
| 3853 return size; | |
| 3854 } | |
| 3855 | |
| 3856 /* Vthis_command_keys having value Qnil means that the next time | |
| 3857 push_this_command_keys is called, it should start over. | |
| 3858 The times at which the command-keys are reset | |
| 3859 (instead of merely being augmented) are pretty counterintuitive. | |
| 3860 (More specifically: | |
| 3861 | |
| 3862 -- We do not reset this-command-keys when we finish reading a | |
| 3863 command. This is because some commands (e.g. C-u) act | |
| 3864 like command prefixes; they signal this by setting prefix-arg | |
| 3865 to non-nil. | |
| 3866 -- Therefore, we reset this-command-keys when we finish | |
| 3867 executing a command, unless prefix-arg is set. | |
| 3868 -- However, if we ever do a non-local exit out of a command | |
| 3869 loop (e.g. an error in a command), we need to reset | |
| 3870 this-command-keys. We do this by calling reset_this_command_keys() | |
| 3871 from cmdloop.c, whenever an error causes an invocation of the | |
| 3872 default error handler, and whenever there's a throw to top-level.) | |
| 3873 */ | |
| 3874 | |
| 3875 void | |
| 3876 reset_this_command_keys (Lisp_Object console, int clear_echo_area_p) | |
| 3877 { | |
| 757 | 3878 if (!NILP (console)) |
| 3879 { | |
| 3880 /* console is nil if we just deleted the console as a result of C-x 5 | |
| 3881 0. Unfortunately things are currently in a messy situation where | |
| 3882 some stuff is console-local and other stuff isn't, so we need to | |
| 3883 do everything that's not console-local. */ | |
| 3884 struct command_builder *command_builder = | |
| 3885 XCOMMAND_BUILDER (XCONSOLE (console)->command_builder); | |
| 3886 | |
| 3887 reset_key_echo (command_builder, clear_echo_area_p); | |
| 3888 reset_current_events (command_builder); | |
| 3889 } | |
| 3890 else | |
| 3891 reset_key_echo (0, clear_echo_area_p); | |
| 428 | 3892 |
| 3893 deallocate_event_chain (Vthis_command_keys); | |
| 3894 Vthis_command_keys = Qnil; | |
| 3895 Vthis_command_keys_tail = Qnil; | |
| 3896 } | |
| 3897 | |
| 3898 static void | |
| 3899 push_this_command_keys (Lisp_Object event) | |
| 3900 { | |
| 3025 | 3901 Lisp_Object new_ = Fmake_event (Qnil, Qnil); |
| 3902 | |
| 3903 Fcopy_event (event, new_); | |
| 3904 enqueue_event (new_, &Vthis_command_keys, &Vthis_command_keys_tail); | |
| 428 | 3905 } |
| 3906 | |
| 3907 /* The following two functions are used in call-interactively, | |
| 3908 for the @ and e specifications. We used to just use | |
| 3909 `current-mouse-event' (i.e. the last mouse event in this-command-keys), | |
| 3910 but FSF does it more generally so we follow their lead. */ | |
| 3911 | |
| 3912 Lisp_Object | |
| 3913 extract_this_command_keys_nth_mouse_event (int n) | |
| 3914 { | |
| 3915 Lisp_Object event; | |
| 3916 | |
| 3917 EVENT_CHAIN_LOOP (event, Vthis_command_keys) | |
| 3918 { | |
| 3919 if (EVENTP (event) | |
| 3920 && (XEVENT_TYPE (event) == button_press_event | |
| 3921 || XEVENT_TYPE (event) == button_release_event | |
| 3922 || XEVENT_TYPE (event) == misc_user_event)) | |
| 3923 { | |
| 3924 if (!n) | |
| 3925 { | |
| 2500 | 3926 /* must copy to avoid an ABORT() in next_event_internal() */ |
| 428 | 3927 if (!NILP (XEVENT_NEXT (event))) |
| 3928 return Fcopy_event (event, Qnil); | |
| 3929 else | |
| 3930 return event; | |
| 3931 } | |
| 3932 n--; | |
| 3933 } | |
| 3934 } | |
| 3935 | |
| 3936 return Qnil; | |
| 3937 } | |
| 3938 | |
| 3939 Lisp_Object | |
| 3940 extract_vector_nth_mouse_event (Lisp_Object vector, int n) | |
| 3941 { | |
| 3942 int i; | |
| 3943 int len = XVECTOR_LENGTH (vector); | |
| 3944 | |
| 3945 for (i = 0; i < len; i++) | |
| 3946 { | |
| 3947 Lisp_Object event = XVECTOR_DATA (vector)[i]; | |
| 3948 if (EVENTP (event)) | |
| 3949 switch (XEVENT_TYPE (event)) | |
| 3950 { | |
| 3951 case button_press_event : | |
| 3952 case button_release_event : | |
| 3953 case misc_user_event : | |
| 3954 if (n == 0) | |
| 3955 return event; | |
| 3956 n--; | |
| 3957 break; | |
| 3958 default: | |
| 3959 continue; | |
| 3960 } | |
| 3961 } | |
| 3962 | |
| 3963 return Qnil; | |
| 3964 } | |
| 3965 | |
| 3966 static void | |
| 3967 push_recent_keys (Lisp_Object event) | |
| 3968 { | |
| 3969 Lisp_Object e; | |
| 3970 | |
| 3971 if (NILP (Vrecent_keys_ring)) | |
| 3972 Vrecent_keys_ring = make_vector (recent_keys_ring_size, Qnil); | |
| 3973 | |
| 3974 e = XVECTOR_DATA (Vrecent_keys_ring) [recent_keys_ring_index]; | |
| 3975 | |
| 3976 if (NILP (e)) | |
| 3977 { | |
| 3978 e = Fmake_event (Qnil, Qnil); | |
| 3979 XVECTOR_DATA (Vrecent_keys_ring) [recent_keys_ring_index] = e; | |
| 3980 } | |
| 3981 Fcopy_event (event, e); | |
| 3982 if (++recent_keys_ring_index == recent_keys_ring_size) | |
| 3983 recent_keys_ring_index = 0; | |
| 3984 } | |
| 3985 | |
| 3986 | |
| 3987 static Lisp_Object | |
| 3988 current_events_into_vector (struct command_builder *command_builder) | |
| 3989 { | |
| 3990 Lisp_Object vector; | |
| 3991 Lisp_Object event; | |
| 3992 int n = event_chain_count (command_builder->current_events); | |
| 3993 | |
| 3994 /* Copy the vector and the events in it. */ | |
| 3995 /* No need to copy the events, since they're already copies, and | |
| 3996 nobody other than the command-builder has pointers to them */ | |
| 3997 vector = make_vector (n, Qnil); | |
| 3998 n = 0; | |
| 3999 EVENT_CHAIN_LOOP (event, command_builder->current_events) | |
| 4000 XVECTOR_DATA (vector)[n++] = event; | |
| 4001 reset_command_builder_event_chain (command_builder); | |
| 4002 return vector; | |
| 4003 } | |
| 4004 | |
| 4005 | |
| 4006 /* | |
| 4007 Given the current state of the command builder and a new command event | |
| 4008 that has just been dispatched: | |
| 4009 | |
| 4010 -- add the event to the event chain forming the current command | |
| 4011 (doing meta-translation as necessary) | |
| 4012 -- return the binding of this event chain; this will be one of: | |
| 4013 -- nil (there is no binding) | |
| 4014 -- a keymap (part of a command has been specified) | |
| 4015 -- a command (anything that satisfies `commandp'; this includes | |
| 4016 some symbols, lists, subrs, strings, vectors, and | |
| 4017 compiled-function objects) | |
| 4018 */ | |
| 4019 static Lisp_Object | |
| 4020 lookup_command_event (struct command_builder *command_builder, | |
| 4021 Lisp_Object event, int allow_misc_user_events_p) | |
| 4022 { | |
| 4023 /* This function can GC */ | |
| 4024 struct frame *f = selected_frame (); | |
| 4025 /* Clear output from previous command execution */ | |
| 4026 if (!EQ (Qcommand, echo_area_status (f)) | |
| 4027 /* but don't let mouse-up clear what mouse-down just printed */ | |
| 4028 && (XEVENT (event)->event_type != button_release_event)) | |
| 4029 clear_echo_area (f, Qnil, 0); | |
| 4030 | |
| 4031 /* Add the given event to the command builder. | |
| 4032 Extra hack: this also updates the recent_keys_ring and Vthis_command_keys | |
| 4033 vectors to translate "ESC x" to "M-x" (for any "x" of course). | |
| 4034 */ | |
| 4035 { | |
| 4036 Lisp_Object recent = command_builder->most_current_event; | |
| 4037 | |
| 4038 if (EVENTP (recent) | |
| 1204 | 4039 && event_matches_key_specifier_p (recent, Vmeta_prefix_char)) |
| 428 | 4040 { |
| 440 | 4041 Lisp_Event *e; |
| 428 | 4042 /* When we see a sequence like "ESC x", pretend we really saw "M-x". |
| 4043 DoubleThink the recent-keys and this-command-keys as well. */ | |
| 4044 | |
| 4045 /* Modify the previous most-recently-pushed event on the command | |
| 4046 builder to be a copy of this one with the meta-bit set instead of | |
| 4047 pushing a new event. | |
| 4048 */ | |
| 4049 Fcopy_event (event, recent); | |
| 4050 e = XEVENT (recent); | |
| 934 | 4051 if (EVENT_TYPE (e) == key_press_event) |
| 1204 | 4052 SET_EVENT_KEY_MODIFIERS (e, EVENT_KEY_MODIFIERS (e) | |
| 4053 XEMACS_MOD_META); | |
| 934 | 4054 else if (EVENT_TYPE (e) == button_press_event |
| 4055 || EVENT_TYPE (e) == button_release_event) | |
| 1204 | 4056 SET_EVENT_BUTTON_MODIFIERS (e, EVENT_BUTTON_MODIFIERS (e) | |
| 4057 XEMACS_MOD_META); | |
| 428 | 4058 else |
| 2500 | 4059 ABORT (); |
| 428 | 4060 |
| 4061 { | |
| 4062 int tckn = event_chain_count (Vthis_command_keys); | |
| 4063 if (tckn >= 2) | |
| 4064 /* ??? very strange if it's < 2. */ | |
| 4065 this_command_keys_replace_suffix | |
| 4066 (event_chain_nth (Vthis_command_keys, tckn - 2), | |
| 4067 Fcopy_event (recent, Qnil)); | |
| 4068 } | |
| 4069 | |
| 4070 regenerate_echo_keys_from_this_command_keys (command_builder); | |
| 4071 } | |
| 4072 else | |
| 771 | 4073 command_builder_append_event (command_builder, event); |
| 428 | 4074 } |
| 4075 | |
| 4076 { | |
| 771 | 4077 Lisp_Object leaf = |
| 4078 command_builder_find_leaf_and_update_global_state | |
| 4079 (command_builder, | |
| 4080 allow_misc_user_events_p); | |
| 428 | 4081 struct gcpro gcpro1; |
| 4082 GCPRO1 (leaf); | |
| 4083 | |
| 4084 if (KEYMAPP (leaf)) | |
| 4085 { | |
| 442 | 4086 #if defined (HAVE_X_WINDOWS) && defined (LWLIB_MENUBARS_LUCID) |
| 4087 if (!x_kludge_lw_menu_active ()) | |
| 4088 #else | |
| 4089 if (1) | |
| 4090 #endif | |
| 428 | 4091 { |
| 4092 Lisp_Object prompt = Fkeymap_prompt (leaf, Qt); | |
| 4093 if (STRINGP (prompt)) | |
| 4094 { | |
| 4095 /* Append keymap prompt to key echo buffer */ | |
| 4096 int buf_index = command_builder->echo_buf_index; | |
| 4097 Bytecount len = XSTRING_LENGTH (prompt); | |
| 4098 | |
| 4099 if (len + buf_index + 1 <= command_builder->echo_buf_length) | |
| 4100 { | |
| 867 | 4101 Ibyte *echo = command_builder->echo_buf + buf_index; |
| 428 | 4102 memcpy (echo, XSTRING_DATA (prompt), len); |
| 4103 echo[len] = 0; | |
| 4104 } | |
| 4105 maybe_echo_keys (command_builder, 1); | |
| 4106 } | |
| 4107 else | |
| 4108 maybe_echo_keys (command_builder, 0); | |
| 4109 } | |
| 853 | 4110 /* #### i don't trust this at all. --ben */ |
| 4111 #if 0 | |
| 442 | 4112 else if (!NILP (Vquit_flag)) |
| 4113 { | |
| 4114 /* if quit happened during menu acceleration, pretend we read it */ | |
| 4115 struct console *con = XCONSOLE (Fselected_console ()); | |
| 1204 | 4116 |
| 4117 enqueue_command_event (Fcopy_event (CONSOLE_QUIT_EVENT (con), | |
| 4118 Qnil)); | |
| 442 | 4119 Vquit_flag = Qnil; |
| 4120 } | |
| 853 | 4121 #endif |
| 428 | 4122 } |
| 4123 else if (!NILP (leaf)) | |
| 4124 { | |
| 4125 if (EQ (Qcommand, echo_area_status (f)) | |
| 4126 && command_builder->echo_buf_index > 0) | |
| 4127 { | |
| 4128 /* If we had been echoing keys, echo the last one (without | |
| 4129 the trailing dash) and redisplay before executing the | |
| 4130 command. */ | |
| 4131 command_builder->echo_buf[command_builder->echo_buf_index] = 0; | |
| 4132 maybe_echo_keys (command_builder, 1); | |
| 4133 Fsit_for (Qzero, Qt); | |
| 4134 } | |
| 4135 } | |
| 4136 RETURN_UNGCPRO (leaf); | |
| 4137 } | |
| 4138 } | |
| 4139 | |
| 479 | 4140 static int |
| 4932 | 4141 is_scrollbar_event (Lisp_Object USED_IF_SCROLLBARS (event)) |
| 479 | 4142 { |
| 516 | 4143 #ifdef HAVE_SCROLLBARS |
| 479 | 4144 Lisp_Object fun; |
| 4145 | |
| 934 | 4146 if (XEVENT_TYPE (event) != misc_user_event) |
| 4147 return 0; | |
| 1204 | 4148 fun = XEVENT_MISC_USER_FUNCTION (event); |
| 479 | 4149 |
| 4150 return (EQ (fun, Qscrollbar_line_up) || | |
| 4151 EQ (fun, Qscrollbar_line_down) || | |
| 4152 EQ (fun, Qscrollbar_page_up) || | |
| 4153 EQ (fun, Qscrollbar_page_down) || | |
| 4154 EQ (fun, Qscrollbar_to_top) || | |
| 4155 EQ (fun, Qscrollbar_to_bottom) || | |
| 4156 EQ (fun, Qscrollbar_vertical_drag) || | |
| 4157 EQ (fun, Qscrollbar_char_left) || | |
| 4158 EQ (fun, Qscrollbar_char_right) || | |
| 4159 EQ (fun, Qscrollbar_page_left) || | |
| 4160 EQ (fun, Qscrollbar_page_right) || | |
| 4161 EQ (fun, Qscrollbar_to_left) || | |
| 4162 EQ (fun, Qscrollbar_to_right) || | |
| 4163 EQ (fun, Qscrollbar_horizontal_drag)); | |
| 516 | 4164 #else |
| 4165 return 0; | |
| 4166 #endif /* HAVE_SCROLLBARS */ | |
| 479 | 4167 } |
| 4168 | |
| 428 | 4169 static void |
| 4170 execute_command_event (struct command_builder *command_builder, | |
| 4171 Lisp_Object event) | |
| 4172 { | |
| 4173 /* This function can GC */ | |
| 4174 struct console *con = XCONSOLE (command_builder->console); | |
| 4175 struct gcpro gcpro1; | |
| 4176 | |
| 4177 GCPRO1 (event); /* event may be freshly created */ | |
| 444 | 4178 |
| 479 | 4179 /* #### This call to is_scrollbar_event() isn't quite right, but |
| 4180 fixing properly it requires more work than can go into 21.4. | |
| 4181 (We really need to split out menu, scrollbar, dialog, and other | |
| 4182 types of events from misc-user, and put the remaining ones in a | |
| 4183 new `user-eval' type that behaves like an eval event but is a | |
| 4184 user event and thus has all of its semantics -- e.g. being | |
| 4185 delayed during `accept-process-output' and similar wait states.) | |
| 4186 | |
| 4187 The real issue here is that "user events" and "command events" | |
| 4188 are not the same thing, but are very much confused in | |
| 4189 event-stream.c. User events are, essentially, any event that | |
| 4190 should be delayed by accept-process-output, should terminate a | |
| 4191 sit-for, etc. -- basically, any event that needs to be processed | |
| 4192 synchronously with key and mouse events. Command events are | |
| 4193 those that participate in command building; scrollbar events | |
| 4194 clearly don't belong because they should be transparent in a | |
| 4195 sequence like C-x @ h <scrollbar-drag> x, which used to cause a | |
| 4196 crash before checks similar to the is_scrollbar_event() call were | |
| 4197 added. Do other events belong with scrollbar events? I'm not | |
| 4198 sure; we need to categorize all misc-user events and see what | |
| 4199 their semantics are. | |
| 4200 | |
| 4201 (You might ask, why do scrollbar events need to be user events? | |
| 4202 That's a good question. The answer seems to be that they can | |
| 4203 change point, and having this happen asynchronously would be a | |
| 4204 very bad idea. According to the "proper" functioning of | |
| 4205 scrollbars, this should not happen, but XEmacs does not allow | |
| 4206 point to go outside of the window.) | |
| 4207 | |
| 4208 Scrollbar events and similar non-command events should obviously | |
| 4209 not be recorded in this-command-keys, so we need to check for | |
| 4210 this in next-event. | |
| 4211 | |
| 4212 #### We call reset_current_events() twice in this function -- | |
| 4213 #### here, and later as a result of reset_this_command_keys(). | |
| 4214 #### This is almost certainly wrong; need to figure out what's | |
| 4215 #### correct. | |
| 4216 | |
| 4217 #### We need to figure out what's really correct w.r.t. scrollbar | |
| 4218 #### events. With these new fixes in, it actually works to do | |
| 4219 #### C-x <scrollbar-drag> 5 2, but the key echo gets messed up | |
| 4220 #### (starts over at 5). We really need to be special-casing | |
| 4221 #### scrollbar events at a lower level, and not really passing | |
| 4222 #### them through the command builder at all. (e.g. do scrollbar | |
| 4223 #### events belong in macros??? doubtful; probably only the | |
| 4224 #### point movement, if any, belongs, special-cased as a | |
| 4225 #### pseudo-issued M-x goto-char command). #### Need more work | |
| 4226 #### here. Do this when separating out scrollbar events. | |
| 4227 */ | |
| 4228 | |
| 4229 if (!is_scrollbar_event (event)) | |
| 444 | 4230 reset_current_events (command_builder); |
| 428 | 4231 |
| 4232 switch (XEVENT (event)->event_type) | |
| 4233 { | |
| 4234 case key_press_event: | |
| 4235 Vcurrent_mouse_event = Qnil; | |
| 4236 break; | |
| 4237 case button_press_event: | |
| 4238 case button_release_event: | |
| 4239 case misc_user_event: | |
| 4240 Vcurrent_mouse_event = Fcopy_event (event, Qnil); | |
| 4241 break; | |
| 4242 default: break; | |
| 4243 } | |
| 4244 | |
| 4245 /* Store the last-command-event. The semantics of this is that it | |
| 4246 is the last event most recently involved in command-lookup. */ | |
| 4247 if (!EVENTP (Vlast_command_event)) | |
| 4248 Vlast_command_event = Fmake_event (Qnil, Qnil); | |
| 4249 if (XEVENT (Vlast_command_event)->event_type == dead_event) | |
| 4250 { | |
| 4251 Vlast_command_event = Fmake_event (Qnil, Qnil); | |
| 563 | 4252 invalid_state ("Someone deallocated the last-command-event!", Qunbound); |
| 428 | 4253 } |
| 4254 | |
| 4255 if (! EQ (event, Vlast_command_event)) | |
| 4256 Fcopy_event (event, Vlast_command_event); | |
| 4257 | |
| 4258 /* Note that last-command-char will never have its high-bit set, in | |
| 4259 an effort to sidestep the ambiguity between M-x and oslash. */ | |
| 4260 Vlast_command_char = Fevent_to_character (Vlast_command_event, | |
| 2862 | 4261 Qnil, Qnil, Qnil); |
| 428 | 4262 |
| 4263 /* Actually call the command, with all sorts of hair to preserve or clear | |
| 4264 the echo-area and region as appropriate and call the pre- and post- | |
| 4265 command-hooks. */ | |
| 4266 { | |
| 4267 int old_kbd_macro = con->kbd_macro_end; | |
| 4268 struct window *w = XWINDOW (Fselected_window (Qnil)); | |
| 4269 | |
| 4270 /* We're executing a new command, so the old value is irrelevant. */ | |
| 4271 zmacs_region_stays = 0; | |
| 4272 | |
| 4273 /* If the previous command tried to force a specific window-start, | |
| 4274 reset the flag in case this command moves point far away from | |
| 4275 that position. Also, reset the window's buffer's change | |
| 4276 information so that we don't trigger an incremental update. */ | |
| 4277 if (w->force_start) | |
| 4278 { | |
| 4279 w->force_start = 0; | |
| 4280 buffer_reset_changes (XBUFFER (w->buffer)); | |
| 4281 } | |
| 4282 | |
| 4283 pre_command_hook (); | |
| 4284 | |
| 934 | 4285 if (XEVENT_TYPE (event) == misc_user_event) |
| 4286 { | |
| 1204 | 4287 call1 (XEVENT_MISC_USER_FUNCTION (event), |
| 4288 XEVENT_MISC_USER_OBJECT (event)); | |
| 934 | 4289 } |
| 428 | 4290 else |
| 4291 { | |
| 4292 Fcommand_execute (Vthis_command, Qnil, Qnil); | |
| 4293 } | |
| 4294 | |
| 4295 post_command_hook (); | |
| 4296 | |
| 757 | 4297 /* Console might have been deleted by command */ |
| 4298 if (CONSOLE_LIVE_P (con) && !NILP (con->prefix_arg)) | |
| 428 | 4299 { |
| 4300 /* Commands that set the prefix arg don't update last-command, don't | |
| 4301 reset the echoing state, and don't go into keyboard macros unless | |
| 444 | 4302 followed by another command. Also don't quit here. */ |
| 4303 int speccount = specpdl_depth (); | |
| 4304 specbind (Qinhibit_quit, Qt); | |
| 428 | 4305 maybe_echo_keys (command_builder, 0); |
| 771 | 4306 unbind_to (speccount); |
| 428 | 4307 |
| 4308 /* If we're recording a keyboard macro, and the last command | |
| 4309 executed set a prefix argument, then decrement the pointer to | |
| 4310 the "last character really in the macro" to be just before this | |
| 4311 command. This is so that the ^U in "^U ^X )" doesn't go onto | |
| 4312 the end of macro. */ | |
| 4313 if (!NILP (con->defining_kbd_macro)) | |
| 4314 con->kbd_macro_end = old_kbd_macro; | |
| 4315 } | |
| 4316 else | |
| 4317 { | |
| 4318 /* Start a new command next time */ | |
| 4319 Vlast_command = Vthis_command; | |
| 442 | 4320 Vlast_command_properties = Vthis_command_properties; |
| 4321 Vthis_command_properties = Qnil; | |
| 4322 | |
| 428 | 4323 /* Emacs 18 doesn't unconditionally clear the echoed keystrokes, |
| 4324 so we don't either */ | |
| 479 | 4325 |
| 4326 if (!is_scrollbar_event (event)) | |
| 771 | 4327 reset_this_command_keys (CONSOLE_LIVE_P (con) ? wrap_console (con) |
| 757 | 4328 : Qnil, 0); |
| 428 | 4329 } |
| 4330 } | |
| 4331 | |
| 4332 UNGCPRO; | |
| 4333 } | |
| 4334 | |
| 4335 /* Run the pre command hook. */ | |
| 4336 | |
| 4337 static void | |
| 4338 pre_command_hook (void) | |
| 4339 { | |
| 4340 last_point_position = BUF_PT (current_buffer); | |
| 793 | 4341 last_point_position_buffer = wrap_buffer (current_buffer); |
| 428 | 4342 /* This function can GC */ |
| 853 | 4343 safe_run_hook_trapping_problems |
| 1333 | 4344 (Qcommand, Qpre_command_hook, |
| 4345 INHIBIT_EXISTING_PERMANENT_DISPLAY_OBJECT_DELETION); | |
| 442 | 4346 |
| 4347 /* This is a kludge, but necessary; see simple.el */ | |
| 4348 call0 (Qhandle_pre_motion_command); | |
| 428 | 4349 } |
| 4350 | |
| 4351 /* Run the post command hook. */ | |
| 4352 | |
| 4353 static void | |
| 4354 post_command_hook (void) | |
| 4355 { | |
| 4356 /* This function can GC */ | |
| 4357 /* Turn off region highlighting unless this command requested that | |
| 4358 it be left on, or we're in the minibuffer. We don't turn it off | |
| 4359 when we're in the minibuffer so that things like M-x write-region | |
| 4360 still work! | |
| 4361 | |
| 4362 This could be done via a function on the post-command-hook, but | |
| 4363 we don't want the user to accidentally remove it. | |
| 4364 */ | |
| 4365 | |
| 4366 Lisp_Object win = Fselected_window (Qnil); | |
| 4367 | |
| 4368 /* If the last command deleted the frame, `win' might be nil. | |
| 4369 It seems safest to do nothing in this case. */ | |
| 442 | 4370 /* Note: Someone added the following comment and put #if 0's around |
| 4371 this code, not realizing that doing this invites a crash in the | |
| 4372 line after. */ | |
| 440 | 4373 /* #### This doesn't really fix the problem, |
| 428 | 4374 if delete-frame is called by some hook */ |
| 4375 if (NILP (win)) | |
| 4376 return; | |
| 442 | 4377 |
| 4378 /* This is a kludge, but necessary; see simple.el */ | |
| 4379 call0 (Qhandle_post_motion_command); | |
| 428 | 4380 |
| 4381 if (! zmacs_region_stays | |
| 4382 && (!MINI_WINDOW_P (XWINDOW (win)) | |
| 4383 || EQ (zmacs_region_buffer (), WINDOW_BUFFER (XWINDOW (win))))) | |
| 4384 zmacs_deactivate_region (); | |
| 4385 else | |
| 4386 zmacs_update_region (); | |
| 4387 | |
| 853 | 4388 safe_run_hook_trapping_problems |
| 1333 | 4389 (Qcommand, Qpost_command_hook, |
|
4718
a27de91ae83c
Don't prevent display objects from being deleted for `post-command-hook'.
Mike Sperber <sperber@deinprogramm.de>
parents:
4677
diff
changeset
|
4390 0); |
| 853 | 4391 |
| 4392 #if 0 /* FSF Emacs */ | |
| 4393 if (!NILP (current_buffer->mark_active)) | |
| 4394 { | |
| 4395 if (!NILP (Vdeactivate_mark) && !NILP (Vtransient_mark_mode)) | |
| 4396 { | |
| 4397 current_buffer->mark_active = Qnil; | |
| 4398 run_hook (intern ("deactivate-mark-hook")); | |
| 4399 } | |
| 4400 else if (current_buffer != prev_buffer || | |
| 4401 BUF_MODIFF (current_buffer) != prev_modiff) | |
| 4402 run_hook (intern ("activate-mark-hook")); | |
| 4403 } | |
| 4404 #endif /* FSF Emacs */ | |
| 428 | 4405 |
| 4406 /* #### Kludge!!! This is necessary to make sure that things | |
| 4407 are properly positioned even if post-command-hook moves point. | |
| 4408 #### There should be a cleaner way of handling this. */ | |
| 4409 call0 (Qauto_show_make_point_visible); | |
| 4410 } | |
| 4411 | |
| 4412 | |
| 4413 DEFUN ("dispatch-event", Fdispatch_event, 1, 1, 0, /* | |
| 444 | 4414 Given an event object EVENT as returned by `next-event', execute it. |
| 428 | 4415 |
| 4416 Key-press, button-press, and button-release events get accumulated | |
| 4417 until a complete key sequence (see `read-key-sequence') is reached, | |
| 4418 at which point the sequence is looked up in the current keymaps and | |
| 4419 acted upon. | |
| 4420 | |
| 4421 Mouse motion events cause the low-level handling function stored in | |
| 4422 `mouse-motion-handler' to be called. (There are very few circumstances | |
| 4423 under which you should change this handler. Use `mode-motion-hook' | |
| 4424 instead.) | |
| 4425 | |
| 4426 Menu, timeout, and eval events cause the associated function or handler | |
| 4427 to be called. | |
| 4428 | |
| 4429 Process events cause the subprocess's output to be read and acted upon | |
| 4430 appropriately (see `start-process'). | |
| 4431 | |
| 4432 Magic events are handled as necessary. | |
| 4433 */ | |
| 4434 (event)) | |
| 4435 { | |
| 4436 /* This function can GC */ | |
| 4437 struct command_builder *command_builder; | |
| 440 | 4438 Lisp_Event *ev; |
| 428 | 4439 Lisp_Object console; |
| 4440 Lisp_Object channel; | |
| 1292 | 4441 PROFILE_DECLARE (); |
| 428 | 4442 |
| 4443 CHECK_LIVE_EVENT (event); | |
| 4444 ev = XEVENT (event); | |
| 4445 | |
| 4446 /* events on dead channels get silently eaten */ | |
| 4447 channel = EVENT_CHANNEL (ev); | |
| 4448 if (object_dead_p (channel)) | |
| 4449 return Qnil; | |
| 4450 | |
| 1292 | 4451 PROFILE_RECORD_ENTERING_SECTION (Qdispatch_event); |
| 4452 | |
| 428 | 4453 /* Some events don't have channels (e.g. eval events). */ |
| 4454 console = CDFW_CONSOLE (channel); | |
| 4455 if (NILP (console)) | |
| 4456 console = Vselected_console; | |
| 4457 else if (!EQ (console, Vselected_console)) | |
| 4458 Fselect_console (console); | |
| 4459 | |
| 4460 command_builder = XCOMMAND_BUILDER (XCONSOLE (console)->command_builder); | |
| 934 | 4461 switch (XEVENT_TYPE (event)) |
| 428 | 4462 { |
| 4463 case button_press_event: | |
| 4464 case button_release_event: | |
| 4465 case key_press_event: | |
| 4466 { | |
| 4467 Lisp_Object leaf = lookup_command_event (command_builder, event, 1); | |
| 4468 | |
| 4469 if (KEYMAPP (leaf)) | |
| 4470 /* Incomplete key sequence */ | |
| 4471 break; | |
| 4472 if (NILP (leaf)) | |
| 4473 { | |
| 4474 /* At this point, we know that the sequence is not bound to a | |
| 4475 command. Normally, we beep and print a message informing the | |
| 4476 user of this. But we do not beep or print a message when: | |
| 4477 | |
| 4478 o the last event in this sequence is a mouse-up event; or | |
| 4479 o the last event in this sequence is a mouse-down event and | |
| 4480 there is a binding for the mouse-up version. | |
| 4481 | |
| 4482 That is, if the sequence ``C-x button1'' is typed, and is not | |
| 4483 bound to a command, but the sequence ``C-x button1up'' is bound | |
| 4484 to a command, we do not complain about the ``C-x button1'' | |
| 4485 sequence. If neither ``C-x button1'' nor ``C-x button1up'' is | |
| 4486 bound to a command, then we complain about the ``C-x button1'' | |
| 4487 sequence, but later will *not* complain about the | |
| 4488 ``C-x button1up'' sequence, which would be redundant. | |
| 4489 | |
| 4490 This is pretty hairy, but I think it's the most intuitive | |
| 4491 behavior. | |
| 4492 */ | |
| 4493 Lisp_Object terminal = command_builder->most_current_event; | |
| 4494 | |
| 4495 if (XEVENT_TYPE (terminal) == button_press_event) | |
| 4496 { | |
| 4497 int no_bitching; | |
| 4498 /* Temporarily pretend the last event was an "up" instead of a | |
| 4499 "down", and look up its binding. */ | |
| 4500 XEVENT_TYPE (terminal) = button_release_event; | |
| 4501 /* If the "up" version is bound, don't complain. */ | |
| 4502 no_bitching | |
| 771 | 4503 = !NILP (command_builder_find_leaf_and_update_global_state |
| 4504 (command_builder, 0)); | |
| 428 | 4505 /* Undo the temporary changes we just made. */ |
| 4506 XEVENT_TYPE (terminal) = button_press_event; | |
| 4507 if (no_bitching) | |
| 4508 { | |
| 4509 /* Pretend this press was not seen (treat as a prefix) */ | |
| 4510 if (EQ (command_builder->current_events, terminal)) | |
| 4511 { | |
| 4512 reset_current_events (command_builder); | |
| 4513 } | |
| 4514 else | |
| 4515 { | |
| 4516 Lisp_Object eve; | |
| 4517 | |
| 4518 EVENT_CHAIN_LOOP (eve, command_builder->current_events) | |
| 4519 if (EQ (XEVENT_NEXT (eve), terminal)) | |
| 4520 break; | |
| 4521 | |
| 4522 Fdeallocate_event (command_builder-> | |
| 4523 most_current_event); | |
| 4524 XSET_EVENT_NEXT (eve, Qnil); | |
| 4525 command_builder->most_current_event = eve; | |
| 4526 } | |
| 4527 maybe_echo_keys (command_builder, 1); | |
| 4528 break; | |
| 4529 } | |
| 4530 } | |
| 4531 | |
| 4532 /* Complain that the typed sequence is not defined, if this is the | |
| 4533 kind of sequence that warrants a complaint. */ | |
| 4534 XCONSOLE (console)->defining_kbd_macro = Qnil; | |
| 4535 XCONSOLE (console)->prefix_arg = Qnil; | |
| 4536 /* Don't complain about undefined button-release events */ | |
| 4537 if (XEVENT_TYPE (terminal) != button_release_event) | |
| 4538 { | |
| 4539 Lisp_Object keys = current_events_into_vector (command_builder); | |
| 4540 struct gcpro gcpro1; | |
| 4541 | |
| 4542 /* Run the pre-command-hook before barfing about an undefined | |
| 4543 key. */ | |
| 4544 Vthis_command = Qnil; | |
| 4545 GCPRO1 (keys); | |
| 4546 pre_command_hook (); | |
| 4547 UNGCPRO; | |
| 4548 /* The post-command-hook doesn't run. */ | |
| 4549 Fsignal (Qundefined_keystroke_sequence, list1 (keys)); | |
| 4550 } | |
| 4551 /* Reset the command builder for reading the next sequence. */ | |
| 4552 reset_this_command_keys (console, 1); | |
| 4553 } | |
| 4554 else /* key sequence is bound to a command */ | |
| 4555 { | |
| 430 | 4556 int magic_undo = 0; |
| 4557 int magic_undo_count = 20; | |
| 4558 | |
| 428 | 4559 Vthis_command = leaf; |
| 430 | 4560 |
| 428 | 4561 /* Don't push an undo boundary if the command set the prefix arg, |
| 4562 or if we are executing a keyboard macro, or if in the | |
| 4563 minibuffer. If the command we are about to execute is | |
| 4564 self-insert, it's tricky: up to 20 consecutive self-inserts may | |
| 4565 be done without an undo boundary. This counter is reset as | |
| 4566 soon as a command other than self-insert-command is executed. | |
| 430 | 4567 |
| 442 | 4568 Programmers can also use the `self-insert-defer-undo' |
| 4569 property to install that behavior on functions other | |
| 430 | 4570 than `self-insert-command', or to change the magic |
| 442 | 4571 number 20 to something else. #### DOCUMENT THIS! */ |
| 430 | 4572 |
| 4573 if (SYMBOLP (leaf)) | |
| 4574 { | |
| 4575 Lisp_Object prop = Fget (leaf, Qself_insert_defer_undo, Qnil); | |
| 4576 if (NATNUMP (prop)) | |
| 4577 magic_undo = 1, magic_undo_count = XINT (prop); | |
| 4578 else if (!NILP (prop)) | |
| 4579 magic_undo = 1; | |
| 4580 else if (EQ (leaf, Qself_insert_command)) | |
| 4581 magic_undo = 1; | |
| 4582 } | |
| 4583 | |
| 4584 if (!magic_undo) | |
| 428 | 4585 command_builder->self_insert_countdown = 0; |
| 4586 if (NILP (XCONSOLE (console)->prefix_arg) | |
| 4587 && NILP (Vexecuting_macro) | |
| 4588 && command_builder->self_insert_countdown == 0) | |
| 4589 Fundo_boundary (); | |
| 4590 | |
| 430 | 4591 if (magic_undo) |
| 428 | 4592 { |
| 4593 if (--command_builder->self_insert_countdown < 0) | |
| 430 | 4594 command_builder->self_insert_countdown = magic_undo_count; |
| 428 | 4595 } |
| 4596 execute_command_event | |
| 4597 (command_builder, | |
| 444 | 4598 internal_equal (event, command_builder->most_current_event, 0) |
| 428 | 4599 ? event |
| 4600 /* Use the translated event that was most recently seen. | |
| 4601 This way, last-command-event becomes f1 instead of | |
| 4602 the P from ESC O P. But we must copy it, else we'll | |
| 4603 lose when the command-builder events are deallocated. */ | |
| 444 | 4604 : Fcopy_event (command_builder->most_current_event, Qnil)); |
| 428 | 4605 } |
| 4606 break; | |
| 4607 } | |
| 4608 case misc_user_event: | |
| 4609 { | |
| 4610 /* Jamie said: | |
| 4611 | |
| 4612 We could just always use the menu item entry, whatever it is, but | |
| 4613 this might break some Lisp code that expects `this-command' to | |
| 4614 always contain a symbol. So only store it if this is a simple | |
| 4615 `call-interactively' sort of menu item. | |
| 4616 | |
| 4617 But this is bogus. `this-command' could be a string or vector | |
| 4618 anyway (for keyboard macros). There's even one instance | |
| 4619 (in pending-del.el) of `this-command' getting set to a cons | |
| 4620 (a lambda expression). So in the `eval' case I'll just | |
| 4621 convert it into a lambda expression. | |
| 4622 */ | |
| 1204 | 4623 if (EQ (XEVENT_MISC_USER_FUNCTION (event), Qcall_interactively) |
| 4624 && SYMBOLP (XEVENT_MISC_USER_OBJECT (event))) | |
| 4625 Vthis_command = XEVENT_MISC_USER_OBJECT (event); | |
| 4626 else if (EQ (XEVENT_MISC_USER_FUNCTION (event), Qeval)) | |
| 934 | 4627 Vthis_command = |
| 1204 | 4628 Fcons (Qlambda, Fcons (Qnil, XEVENT_MISC_USER_OBJECT (event))); |
| 4629 else if (SYMBOLP (XEVENT_MISC_USER_FUNCTION (event))) | |
| 934 | 4630 /* A scrollbar command or the like. */ |
| 1204 | 4631 Vthis_command = XEVENT_MISC_USER_FUNCTION (event); |
| 428 | 4632 else |
| 4633 /* Huh? */ | |
| 4634 Vthis_command = Qnil; | |
| 4635 | |
| 4636 /* clear the echo area */ | |
| 4637 reset_key_echo (command_builder, 1); | |
| 4638 | |
| 4639 command_builder->self_insert_countdown = 0; | |
| 4640 if (NILP (XCONSOLE (console)->prefix_arg) | |
| 4641 && NILP (Vexecuting_macro) | |
| 4642 && !EQ (minibuf_window, Fselected_window (Qnil))) | |
| 4643 Fundo_boundary (); | |
| 4644 execute_command_event (command_builder, event); | |
| 4645 break; | |
| 4646 } | |
| 4647 default: | |
| 4648 execute_internal_event (event); | |
| 4649 break; | |
| 4650 } | |
| 1292 | 4651 |
| 4652 PROFILE_RECORD_EXITING_SECTION (Qdispatch_event); | |
| 428 | 4653 return Qnil; |
| 4654 } | |
| 4655 | |
| 4656 DEFUN ("read-key-sequence", Fread_key_sequence, 1, 3, 0, /* | |
| 4657 Read a sequence of keystrokes or mouse clicks. | |
| 4658 Returns a vector of the event objects read. The vector and the event | |
| 444 | 4659 objects it contains are freshly created (and so will not be side-effected |
| 428 | 4660 by subsequent calls to this function). |
| 4661 | |
| 4662 The sequence read is sufficient to specify a non-prefix command starting | |
| 4663 from the current local and global keymaps. A C-g typed while in this | |
| 4664 function is treated like any other character, and `quit-flag' is not set. | |
| 4665 | |
| 4666 First arg PROMPT is a prompt string. If nil, do not prompt specially. | |
| 444 | 4667 |
| 4668 Second optional arg CONTINUE-ECHO non-nil means this key echoes as a | |
| 4669 continuation of the previous key. | |
| 4670 | |
| 4671 Third optional arg DONT-DOWNCASE-LAST non-nil means do not convert the | |
| 4672 last event to lower case. (Normally any upper case event is converted | |
| 4673 to lower case if the original event is undefined and the lower case | |
| 4674 equivalent is defined.) This argument is provided mostly for FSF | |
| 4675 compatibility; the equivalent effect can be achieved more generally by | |
| 4676 binding `retry-undefined-key-binding-unshifted' to nil around the call | |
| 4677 to `read-key-sequence'. | |
| 428 | 4678 |
| 4679 If the user selects a menu item while we are prompting for a key-sequence, | |
| 4680 the returned value will be a vector of a single menu-selection event. | |
| 4681 An error will be signalled if you pass this value to `lookup-key' or a | |
| 4682 related function. | |
| 4683 | |
| 4684 `read-key-sequence' checks `function-key-map' for function key | |
| 444 | 4685 sequences, where they wouldn't conflict with ordinary bindings. |
| 4686 See `function-key-map' for more details. | |
| 428 | 4687 */ |
| 4688 (prompt, continue_echo, dont_downcase_last)) | |
| 4689 { | |
| 4690 /* This function can GC */ | |
| 4691 struct console *con = XCONSOLE (Vselected_console); /* #### correct? | |
| 4692 Probably not -- see | |
| 4693 comment in | |
| 4694 next-event */ | |
| 4695 struct command_builder *command_builder = | |
| 4696 XCOMMAND_BUILDER (con->command_builder); | |
| 4697 Lisp_Object result; | |
| 4698 Lisp_Object event = Fmake_event (Qnil, Qnil); | |
| 4699 int speccount = specpdl_depth (); | |
| 4700 struct gcpro gcpro1; | |
| 4701 GCPRO1 (event); | |
| 4702 | |
| 707 | 4703 record_unwind_protect (Fset_buffer, Fcurrent_buffer ()); |
| 428 | 4704 if (!NILP (prompt)) |
| 4705 CHECK_STRING (prompt); | |
| 4706 /* else prompt = Fkeymap_prompt (current_buffer->keymap); may GC */ | |
| 4707 QUIT; | |
| 4708 | |
| 4709 if (NILP (continue_echo)) | |
| 771 | 4710 reset_this_command_keys (wrap_console (con), 1); |
| 428 | 4711 |
| 4712 if (!NILP (dont_downcase_last)) | |
| 4713 specbind (Qretry_undefined_key_binding_unshifted, Qnil); | |
| 4714 | |
| 4715 for (;;) | |
| 4716 { | |
| 4717 Fnext_event (event, prompt); | |
| 4718 /* restore the selected-console damage */ | |
| 4719 con = event_console_or_selected (event); | |
| 4720 command_builder = XCOMMAND_BUILDER (con->command_builder); | |
| 4721 if (! command_event_p (event)) | |
| 4722 execute_internal_event (event); | |
| 4723 else | |
| 4724 { | |
| 934 | 4725 if (XEVENT_TYPE (event) == misc_user_event) |
| 428 | 4726 reset_current_events (command_builder); |
| 4727 result = lookup_command_event (command_builder, event, 1); | |
| 4728 if (!KEYMAPP (result)) | |
| 4729 { | |
| 4730 result = current_events_into_vector (command_builder); | |
| 4731 reset_key_echo (command_builder, 0); | |
| 4732 break; | |
| 4733 } | |
| 4734 prompt = Qnil; | |
| 4735 } | |
| 4736 } | |
| 4737 | |
| 4738 Fdeallocate_event (event); | |
| 771 | 4739 RETURN_UNGCPRO (unbind_to_1 (speccount, result)); |
| 428 | 4740 } |
| 4741 | |
| 4742 DEFUN ("this-command-keys", Fthis_command_keys, 0, 0, 0, /* | |
| 4743 Return a vector of the keyboard or mouse button events that were used | |
| 4744 to invoke this command. This copies the vector and the events; it is safe | |
| 4745 to keep and modify them. | |
| 4746 */ | |
| 4747 ()) | |
| 4748 { | |
| 4749 Lisp_Object event; | |
| 4750 Lisp_Object result; | |
| 4751 int len; | |
| 4752 | |
| 4753 if (NILP (Vthis_command_keys)) | |
| 4754 return make_vector (0, Qnil); | |
| 4755 | |
| 4756 len = event_chain_count (Vthis_command_keys); | |
| 4757 | |
| 4758 result = make_vector (len, Qnil); | |
| 4759 len = 0; | |
| 4760 EVENT_CHAIN_LOOP (event, Vthis_command_keys) | |
| 4761 XVECTOR_DATA (result)[len++] = Fcopy_event (event, Qnil); | |
| 4762 return result; | |
| 4763 } | |
| 4764 | |
| 4765 DEFUN ("reset-this-command-lengths", Freset_this_command_lengths, 0, 0, 0, /* | |
| 4766 Used for complicated reasons in `universal-argument-other-key'. | |
| 4767 | |
| 4768 `universal-argument-other-key' rereads the event just typed. | |
| 4769 It then gets translated through `function-key-map'. | |
| 4770 The translated event gets included in the echo area and in | |
| 4771 the value of `this-command-keys' in addition to the raw original event. | |
| 4772 That is not right. | |
| 4773 | |
| 4774 Calling this function directs the translated event to replace | |
| 4775 the original event, so that only one version of the event actually | |
| 430 | 4776 appears in the echo area and in the value of `this-command-keys'. |
| 428 | 4777 */ |
| 4778 ()) | |
| 4779 { | |
| 4780 /* #### I don't understand this at all, so currently it does nothing. | |
| 4781 If there is ever a problem, maybe someone should investigate. */ | |
| 4782 return Qnil; | |
| 4783 } | |
| 4784 | |
| 4785 | |
| 4786 static void | |
| 4787 dribble_out_event (Lisp_Object event) | |
| 4788 { | |
| 4789 if (NILP (Vdribble_file)) | |
| 4790 return; | |
| 4791 | |
| 934 | 4792 if (XEVENT_TYPE (event) == key_press_event && |
| 1204 | 4793 !XEVENT_KEY_MODIFIERS (event)) |
| 934 | 4794 { |
| 1204 | 4795 Lisp_Object keysym = XEVENT_KEY_KEYSYM (event); |
| 4796 if (CHARP (XEVENT_KEY_KEYSYM (event))) | |
| 428 | 4797 { |
| 867 | 4798 Ichar ch = XCHAR (keysym); |
| 4799 Ibyte str[MAX_ICHAR_LEN]; | |
| 4800 Bytecount len = set_itext_ichar (str, ch); | |
| 428 | 4801 Lstream_write (XLSTREAM (Vdribble_file), str, len); |
| 4802 } | |
| 826 | 4803 else if (string_char_length (XSYMBOL (keysym)->name) == 1) |
| 428 | 4804 /* one-char key events are printed with just the key name */ |
| 4805 Fprinc (keysym, Vdribble_file); | |
| 4806 else if (EQ (keysym, Qreturn)) | |
| 4807 Lstream_putc (XLSTREAM (Vdribble_file), '\n'); | |
| 4808 else if (EQ (keysym, Qspace)) | |
| 4809 Lstream_putc (XLSTREAM (Vdribble_file), ' '); | |
| 4810 else | |
| 4811 Fprinc (event, Vdribble_file); | |
| 4812 } | |
| 4813 else | |
| 4814 Fprinc (event, Vdribble_file); | |
| 4815 Lstream_flush (XLSTREAM (Vdribble_file)); | |
| 4816 } | |
| 4817 | |
| 4818 DEFUN ("open-dribble-file", Fopen_dribble_file, 1, 1, | |
| 4819 "FOpen dribble file: ", /* | |
| 444 | 4820 Start writing all keyboard characters to a dribble file called FILENAME. |
| 4821 If FILENAME is nil, close any open dribble file. | |
| 428 | 4822 */ |
| 444 | 4823 (filename)) |
| 428 | 4824 { |
| 4825 /* This function can GC */ | |
| 4826 /* XEmacs change: always close existing dribble file. */ | |
| 4827 /* FSFmacs uses FILE *'s here. With lstreams, that's unnecessary. */ | |
| 4828 if (!NILP (Vdribble_file)) | |
| 4829 { | |
| 4830 Lstream_close (XLSTREAM (Vdribble_file)); | |
| 4831 Vdribble_file = Qnil; | |
| 4832 } | |
| 444 | 4833 if (!NILP (filename)) |
| 428 | 4834 { |
| 4835 int fd; | |
| 4836 | |
| 444 | 4837 filename = Fexpand_file_name (filename, Qnil); |
| 771 | 4838 fd = qxe_open (XSTRING_DATA (filename), |
| 4839 O_WRONLY | O_TRUNC | O_CREAT | OPEN_BINARY, | |
| 4840 CREAT_MODE); | |
| 428 | 4841 if (fd < 0) |
| 563 | 4842 report_file_error ("Unable to create dribble file", filename); |
| 428 | 4843 Vdribble_file = make_filedesc_output_stream (fd, 0, 0, LSTR_CLOSING); |
| 4844 #ifdef MULE | |
| 4845 Vdribble_file = | |
| 771 | 4846 make_coding_output_stream |
| 4847 (XLSTREAM (Vdribble_file), | |
| 800 | 4848 Qescape_quoted, CODING_ENCODE, 0); |
| 428 | 4849 #endif |
| 4850 } | |
| 4851 return Qnil; | |
| 4852 } | |
| 4853 | |
| 4854 | |
| 442 | 4855 |
| 4856 DEFUN ("current-event-timestamp", Fcurrent_event_timestamp, 0, 1, 0, /* | |
| 4857 Return the current event timestamp of the window system associated with CONSOLE. | |
| 4858 CONSOLE defaults to the selected console if omitted. | |
| 4859 */ | |
| 4860 (console)) | |
| 4861 { | |
| 4862 struct console *c = decode_console (console); | |
| 4863 int tiempo = event_stream_current_event_timestamp (c); | |
| 4864 | |
| 4865 /* This junk is so that timestamps don't get to be negative, but contain | |
| 4866 as many bits as this particular emacs will allow. | |
| 4867 */ | |
| 2039 | 4868 return make_int (EMACS_INT_MAX & tiempo); |
| 442 | 4869 } |
| 4870 | |
| 4871 | |
| 428 | 4872 /************************************************************************/ |
| 4873 /* initialization */ | |
| 4874 /************************************************************************/ | |
| 4875 | |
| 4876 void | |
| 4877 syms_of_event_stream (void) | |
| 4878 { | |
| 442 | 4879 INIT_LRECORD_IMPLEMENTATION (command_builder); |
| 4880 INIT_LRECORD_IMPLEMENTATION (timeout); | |
| 4881 | |
| 563 | 4882 DEFSYMBOL (Qdisabled); |
| 4883 DEFSYMBOL (Qcommand_event_p); | |
| 4884 | |
| 4885 DEFERROR_STANDARD (Qundefined_keystroke_sequence, Qsyntax_error); | |
| 4886 DEFERROR_STANDARD (Qinvalid_key_binding, Qinvalid_state); | |
| 428 | 4887 |
| 4888 DEFSUBR (Frecent_keys); | |
| 4889 DEFSUBR (Frecent_keys_ring_size); | |
| 4890 DEFSUBR (Fset_recent_keys_ring_size); | |
| 4891 DEFSUBR (Finput_pending_p); | |
| 4892 DEFSUBR (Fenqueue_eval_event); | |
| 4893 DEFSUBR (Fnext_event); | |
| 4894 DEFSUBR (Fnext_command_event); | |
| 4895 DEFSUBR (Fdiscard_input); | |
| 4896 DEFSUBR (Fsit_for); | |
| 4897 DEFSUBR (Fsleep_for); | |
| 4898 DEFSUBR (Faccept_process_output); | |
| 4899 DEFSUBR (Fadd_timeout); | |
| 4900 DEFSUBR (Fdisable_timeout); | |
| 4901 DEFSUBR (Fadd_async_timeout); | |
| 4902 DEFSUBR (Fdisable_async_timeout); | |
| 4903 DEFSUBR (Fdispatch_event); | |
| 442 | 4904 DEFSUBR (Fdispatch_non_command_events); |
| 428 | 4905 DEFSUBR (Fread_key_sequence); |
| 4906 DEFSUBR (Fthis_command_keys); | |
| 4907 DEFSUBR (Freset_this_command_lengths); | |
| 4908 DEFSUBR (Fopen_dribble_file); | |
| 442 | 4909 DEFSUBR (Fcurrent_event_timestamp); |
| 428 | 4910 |
| 563 | 4911 DEFSYMBOL (Qpre_command_hook); |
| 4912 DEFSYMBOL (Qpost_command_hook); | |
| 4913 DEFSYMBOL (Qunread_command_events); | |
| 4914 DEFSYMBOL (Qunread_command_event); | |
| 4915 DEFSYMBOL (Qpre_idle_hook); | |
| 4916 DEFSYMBOL (Qhandle_pre_motion_command); | |
| 4917 DEFSYMBOL (Qhandle_post_motion_command); | |
| 4918 DEFSYMBOL (Qretry_undefined_key_binding_unshifted); | |
| 4919 DEFSYMBOL (Qauto_show_make_point_visible); | |
| 4920 | |
| 4921 DEFSYMBOL (Qself_insert_defer_undo); | |
| 4922 DEFSYMBOL (Qcancel_mode_internal); | |
| 1292 | 4923 |
| 4924 DEFSYMBOL (Qnext_event); | |
| 4925 DEFSYMBOL (Qdispatch_event); | |
| 428 | 4926 } |
| 4927 | |
| 4928 void | |
| 4929 reinit_vars_of_event_stream (void) | |
| 4930 { | |
| 4931 recent_keys_ring_index = 0; | |
| 4932 recent_keys_ring_size = 100; | |
| 4933 num_input_chars = 0; | |
| 3263 | 4934 #ifndef NEW_GC |
| 440 | 4935 Vtimeout_free_list = make_lcrecord_list (sizeof (Lisp_Timeout), |
| 428 | 4936 &lrecord_timeout); |
| 4937 staticpro_nodump (&Vtimeout_free_list); | |
| 771 | 4938 Vcommand_builder_free_list = |
| 4939 make_lcrecord_list (sizeof (struct command_builder), | |
| 4940 &lrecord_command_builder); | |
| 4941 staticpro_nodump (&Vcommand_builder_free_list); | |
| 3263 | 4942 #endif /* not NEW_GC */ |
| 428 | 4943 the_low_level_timeout_blocktype = |
| 4944 Blocktype_new (struct low_level_timeout_blocktype); | |
| 4945 something_happened = 0; | |
| 1268 | 4946 recursive_sit_for = 0; |
| 4947 in_modal_loop = 0; | |
| 428 | 4948 } |
| 4949 | |
| 4950 void | |
| 4951 vars_of_event_stream (void) | |
| 4952 { | |
| 4953 Vrecent_keys_ring = Qnil; | |
| 4954 staticpro (&Vrecent_keys_ring); | |
| 4955 | |
| 4956 Vthis_command_keys = Qnil; | |
| 4957 staticpro (&Vthis_command_keys); | |
| 4958 Vthis_command_keys_tail = Qnil; | |
| 1204 | 4959 dump_add_root_lisp_object (&Vthis_command_keys_tail); |
| 428 | 4960 |
| 4961 command_event_queue = Qnil; | |
| 4962 staticpro (&command_event_queue); | |
| 4963 command_event_queue_tail = Qnil; | |
| 1204 | 4964 dump_add_root_lisp_object (&command_event_queue_tail); |
| 4965 | |
| 4966 dispatch_event_queue = Qnil; | |
| 4967 staticpro (&dispatch_event_queue); | |
| 4968 dispatch_event_queue_tail = Qnil; | |
| 4969 dump_add_root_lisp_object (&dispatch_event_queue_tail); | |
| 428 | 4970 |
| 4971 Vlast_selected_frame = Qnil; | |
| 4972 staticpro (&Vlast_selected_frame); | |
| 4973 | |
| 4974 pending_timeout_list = Qnil; | |
| 4975 staticpro (&pending_timeout_list); | |
| 4976 | |
| 4977 pending_async_timeout_list = Qnil; | |
| 4978 staticpro (&pending_async_timeout_list); | |
| 4979 | |
| 4980 last_point_position_buffer = Qnil; | |
| 4981 staticpro (&last_point_position_buffer); | |
| 4982 | |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
4983 QSnext_event_internal = build_ascstring ("next_event_internal()"); |
| 1292 | 4984 staticpro (&QSnext_event_internal); |
|
4952
19a72041c5ed
Mule-izing, various fixes related to char * arguments
Ben Wing <ben@xemacs.org>
parents:
4932
diff
changeset
|
4985 QSexecute_internal_event = build_ascstring ("execute_internal_event()"); |
| 1292 | 4986 staticpro (&QSexecute_internal_event); |
| 4987 | |
| 428 | 4988 DEFVAR_LISP ("echo-keystrokes", &Vecho_keystrokes /* |
| 4989 *Nonzero means echo unfinished commands after this many seconds of pause. | |
| 4990 */ ); | |
| 4991 Vecho_keystrokes = make_int (1); | |
| 4992 | |
| 4993 DEFVAR_INT ("auto-save-interval", &auto_save_interval /* | |
| 4994 *Number of keyboard input characters between auto-saves. | |
| 4995 Zero means disable autosaving due to number of characters typed. | |
| 4996 See also the variable `auto-save-timeout'. | |
| 4997 */ ); | |
| 4998 auto_save_interval = 300; | |
| 4999 | |
| 5000 DEFVAR_LISP ("pre-command-hook", &Vpre_command_hook /* | |
| 5001 Function or functions to run before every command. | |
| 5002 This may examine the `this-command' variable to find out what command | |
| 5003 is about to be run, or may change it to cause a different command to run. | |
| 853 | 5004 Errors while running the hook are caught and turned into warnings. |
| 428 | 5005 */ ); |
| 5006 Vpre_command_hook = Qnil; | |
| 5007 | |
| 5008 DEFVAR_LISP ("post-command-hook", &Vpost_command_hook /* | |
| 5009 Function or functions to run after every command. | |
| 5010 This may examine the `this-command' variable to find out what command | |
| 5011 was just executed. | |
| 5012 */ ); | |
| 5013 Vpost_command_hook = Qnil; | |
| 5014 | |
| 5015 DEFVAR_LISP ("pre-idle-hook", &Vpre_idle_hook /* | |
| 5016 Normal hook run when XEmacs it about to be idle. | |
| 5017 This occurs whenever it is going to block, waiting for an event. | |
| 5018 This generally happens as a result of a call to `next-event', | |
| 5019 `next-command-event', `sit-for', `sleep-for', `accept-process-output', | |
| 853 | 5020 or `get-selection'. Errors while running the hook are caught and |
| 5021 turned into warnings. | |
| 428 | 5022 */ ); |
| 5023 Vpre_idle_hook = Qnil; | |
| 5024 | |
| 5025 DEFVAR_BOOL ("focus-follows-mouse", &focus_follows_mouse /* | |
| 5026 *Variable to control XEmacs behavior with respect to focus changing. | |
| 5027 If this variable is set to t, then XEmacs will not gratuitously change | |
| 5028 the keyboard focus. XEmacs cannot in general detect when this mode is | |
| 5029 used by the window manager, so it is up to the user to set it. | |
| 5030 */ ); | |
| 5031 focus_follows_mouse = 0; | |
| 5032 | |
| 5033 DEFVAR_LISP ("last-command-event", &Vlast_command_event /* | |
| 5034 Last keyboard or mouse button event that was part of a command. This | |
| 5035 variable is off limits: you may not set its value or modify the event that | |
| 5036 is its value, as it is destructively modified by `read-key-sequence'. If | |
| 5037 you want to keep a pointer to this value, you must use `copy-event'. | |
| 5038 */ ); | |
| 5039 Vlast_command_event = Qnil; | |
| 5040 | |
| 5041 DEFVAR_LISP ("last-command-char", &Vlast_command_char /* | |
| 5042 If the value of `last-command-event' is a keyboard event, then | |
| 5043 this is the nearest ASCII equivalent to it. This is the value that | |
| 5044 `self-insert-command' will put in the buffer. Remember that there is | |
| 5045 NOT a 1:1 mapping between keyboard events and ASCII characters: the set | |
| 5046 of keyboard events is much larger, so writing code that examines this | |
| 5047 variable to determine what key has been typed is bad practice, unless | |
| 5048 you are certain that it will be one of a small set of characters. | |
| 5049 */ ); | |
| 5050 Vlast_command_char = Qnil; | |
| 5051 | |
| 5052 DEFVAR_LISP ("last-input-event", &Vlast_input_event /* | |
| 5053 Last keyboard or mouse button event received. This variable is off | |
| 5054 limits: you may not set its value or modify the event that is its value, as | |
| 5055 it is destructively modified by `next-event'. If you want to keep a pointer | |
| 5056 to this value, you must use `copy-event'. | |
| 5057 */ ); | |
| 5058 Vlast_input_event = Qnil; | |
| 5059 | |
| 5060 DEFVAR_LISP ("current-mouse-event", &Vcurrent_mouse_event /* | |
| 5061 The mouse-button event which invoked this command, or nil. | |
| 5062 This is usually what `(interactive "e")' returns. | |
| 5063 */ ); | |
| 5064 Vcurrent_mouse_event = Qnil; | |
| 5065 | |
| 5066 DEFVAR_LISP ("last-input-char", &Vlast_input_char /* | |
| 5067 If the value of `last-input-event' is a keyboard event, then | |
| 5068 this is the nearest ASCII equivalent to it. Remember that there is | |
| 5069 NOT a 1:1 mapping between keyboard events and ASCII characters: the set | |
| 5070 of keyboard events is much larger, so writing code that examines this | |
| 5071 variable to determine what key has been typed is bad practice, unless | |
| 5072 you are certain that it will be one of a small set of characters. | |
| 5073 */ ); | |
| 5074 Vlast_input_char = Qnil; | |
| 5075 | |
| 5076 DEFVAR_LISP ("last-input-time", &Vlast_input_time /* | |
| 5077 The time (in seconds since Jan 1, 1970) of the last-command-event, | |
| 5078 represented as a cons of two 16-bit integers. This is destructively | |
| 5079 modified, so copy it if you want to keep it. | |
| 5080 */ ); | |
| 5081 Vlast_input_time = Qnil; | |
| 5082 | |
| 5083 DEFVAR_LISP ("last-command-event-time", &Vlast_command_event_time /* | |
| 5084 The time (in seconds since Jan 1, 1970) of the last-command-event, | |
| 5085 represented as a list of three integers. The first integer contains | |
| 5086 the most significant 16 bits of the number of seconds, and the second | |
| 5087 integer contains the least significant 16 bits. The third integer | |
| 5088 contains the remainder number of microseconds, if the current system | |
| 5089 supports microsecond clock resolution. This list is destructively | |
| 5090 modified, so copy it if you want to keep it. | |
| 5091 */ ); | |
| 5092 Vlast_command_event_time = Qnil; | |
| 5093 | |
| 5094 DEFVAR_LISP ("unread-command-events", &Vunread_command_events /* | |
| 5095 List of event objects to be read as next command input events. | |
| 5096 This can be used to simulate the receipt of events from the user. | |
| 5097 Normally this is nil. | |
| 5098 Events are removed from the front of this list. | |
| 5099 */ ); | |
| 5100 Vunread_command_events = Qnil; | |
| 5101 | |
| 5102 DEFVAR_LISP ("unread-command-event", &Vunread_command_event /* | |
| 5103 Obsolete. Use `unread-command-events' instead. | |
| 5104 */ ); | |
| 5105 Vunread_command_event = Qnil; | |
| 5106 | |
| 5107 DEFVAR_LISP ("last-command", &Vlast_command /* | |
| 5108 The last command executed. Normally a symbol with a function definition, | |
| 5109 but can be whatever was found in the keymap, or whatever the variable | |
| 5110 `this-command' was set to by that command. | |
| 5111 */ ); | |
| 5112 Vlast_command = Qnil; | |
| 5113 | |
| 5114 DEFVAR_LISP ("this-command", &Vthis_command /* | |
| 5115 The command now being executed. | |
| 5116 The command can set this variable; whatever is put here | |
| 5117 will be in `last-command' during the following command. | |
| 5118 */ ); | |
| 5119 Vthis_command = Qnil; | |
| 5120 | |
| 442 | 5121 DEFVAR_LISP ("last-command-properties", &Vlast_command_properties /* |
| 5122 Value of `this-command-properties' for the last command. | |
| 5123 Used by commands to help synchronize consecutive commands, in preference | |
| 5124 to looking at `last-command' directly. | |
| 5125 */ ); | |
| 5126 Vlast_command_properties = Qnil; | |
| 5127 | |
| 5128 DEFVAR_LISP ("this-command-properties", &Vthis_command_properties /* | |
| 5129 Properties set by the current command. | |
| 5130 At the beginning of each command, the current value of this variable is | |
| 5131 copied to `last-command-properties', and then it is set to nil. Use `putf' | |
| 5132 to add properties to this variable. Commands should use this to communicate | |
| 5133 with pre/post-command hooks, subsequent commands, wrapping commands, etc. | |
| 5134 in preference to looking at and/or setting `this-command'. | |
| 5135 */ ); | |
| 5136 Vthis_command_properties = Qnil; | |
| 5137 | |
| 428 | 5138 DEFVAR_LISP ("help-char", &Vhelp_char /* |
| 5139 Character to recognize as meaning Help. | |
| 5140 When it is read, do `(eval help-form)', and display result if it's a string. | |
| 5141 If the value of `help-form' is nil, this char can be read normally. | |
| 5142 This can be any form recognized as a single key specifier. | |
| 5143 The help-char cannot be a negative number in XEmacs. | |
| 5144 */ ); | |
| 5145 Vhelp_char = make_char (8); /* C-h */ | |
| 5146 | |
| 5147 DEFVAR_LISP ("help-form", &Vhelp_form /* | |
| 5148 Form to execute when character help-char is read. | |
| 5149 If the form returns a string, that string is displayed. | |
| 5150 If `help-form' is nil, the help char is not recognized. | |
| 5151 */ ); | |
| 5152 Vhelp_form = Qnil; | |
| 5153 | |
| 5154 DEFVAR_LISP ("prefix-help-command", &Vprefix_help_command /* | |
| 5155 Command to run when `help-char' character follows a prefix key. | |
| 5156 This command is used only when there is no actual binding | |
| 5157 for that character after that prefix key. | |
| 5158 */ ); | |
| 5159 Vprefix_help_command = Qnil; | |
| 5160 | |
| 5161 DEFVAR_CONST_LISP ("keyboard-translate-table", &Vkeyboard_translate_table /* | |
| 5162 Hash table used as translate table for keyboard input. | |
| 5163 Use `keyboard-translate' to portably add entries to this table. | |
| 5164 Each key-press event is looked up in this table as follows: | |
| 5165 | |
| 5166 -- If an entry maps a symbol to a symbol, then a key-press event whose | |
| 5167 keysym is the former symbol (with any modifiers at all) gets its | |
| 5168 keysym changed and its modifiers left alone. This is useful for | |
| 5169 dealing with non-standard X keyboards, such as the grievous damage | |
| 5170 that Sun has inflicted upon the world. | |
| 442 | 5171 -- If an entry maps a symbol to a character, then a key-press event |
| 5172 whose keysym is the former symbol (with any modifiers at all) gets | |
| 5173 changed into a key-press event matching the latter character, and the | |
| 5174 resulting modifiers are the union of the original and new modifiers. | |
| 428 | 5175 -- If an entry maps a character to a character, then a key-press event |
| 5176 matching the former character gets converted to a key-press event | |
| 5177 matching the latter character. This is useful on ASCII terminals | |
| 5178 for (e.g.) making C-\\ look like C-s, to get around flow-control | |
| 5179 problems. | |
| 5180 -- If an entry maps a character to a symbol, then a key-press event | |
| 5181 matching the character gets converted to a key-press event whose | |
| 5182 keysym is the given symbol and which has no modifiers. | |
| 442 | 5183 |
| 5184 Here's an example: This makes typing parens and braces easier by rerouting | |
| 5185 their positions to eliminate the need to use the Shift key. | |
| 5186 | |
| 5187 (keyboard-translate ?[ ?() | |
| 5188 (keyboard-translate ?] ?)) | |
| 5189 (keyboard-translate ?{ ?[) | |
| 5190 (keyboard-translate ?} ?]) | |
| 5191 (keyboard-translate 'f11 ?{) | |
| 5192 (keyboard-translate 'f12 ?}) | |
| 428 | 5193 */ ); |
| 5194 | |
| 5195 DEFVAR_LISP ("retry-undefined-key-binding-unshifted", | |
| 5196 &Vretry_undefined_key_binding_unshifted /* | |
| 5197 If a key-sequence which ends with a shifted keystroke is undefined | |
| 5198 and this variable is non-nil then the command lookup is retried again | |
| 5199 with the last key unshifted. (e.g. C-X C-F would be retried as C-X C-f.) | |
| 5200 If lookup still fails, a normal error is signalled. In general, | |
| 5201 you should *bind* this, not set it. | |
| 5202 */ ); | |
| 5203 Vretry_undefined_key_binding_unshifted = Qt; | |
| 5204 | |
| 442 | 5205 DEFVAR_BOOL ("modifier-keys-are-sticky", &modifier_keys_are_sticky /* |
| 5206 *Non-nil makes modifier keys sticky. | |
| 5207 This means that you can release the modifier key before pressing down | |
| 5208 the key that you wish to be modified. Although this is non-standard | |
| 5209 behavior, it is recommended because it reduces the strain on your hand, | |
| 5210 thus reducing the incidence of the dreaded Emacs-pinky syndrome. | |
| 444 | 5211 |
| 5212 Modifier keys are sticky within the inverval specified by | |
| 5213 `modifier-keys-sticky-time'. | |
| 442 | 5214 */ ); |
| 5215 modifier_keys_are_sticky = 0; | |
| 5216 | |
| 444 | 5217 DEFVAR_LISP ("modifier-keys-sticky-time", &Vmodifier_keys_sticky_time /* |
| 5218 *Modifier keys are sticky within this many milliseconds. | |
| 5219 If you don't want modifier keys sticking to be bounded, set this to | |
| 5220 non-integer value. | |
| 5221 | |
| 5222 This variable has no effect when `modifier-keys-are-sticky' is nil. | |
| 5223 Currently only implemented under X Window System. | |
| 5224 */ ); | |
| 5225 Vmodifier_keys_sticky_time = make_int (500); | |
| 5226 | |
| 428 | 5227 Vcontrolling_terminal = Qnil; |
| 5228 staticpro (&Vcontrolling_terminal); | |
| 5229 | |
| 5230 Vdribble_file = Qnil; | |
| 5231 staticpro (&Vdribble_file); | |
| 5232 | |
| 5233 #ifdef DEBUG_XEMACS | |
| 5234 DEFVAR_INT ("debug-emacs-events", &debug_emacs_events /* | |
| 5235 If non-zero, display debug information about Emacs events that XEmacs sees. | |
| 5236 Information is displayed on stderr. | |
| 5237 | |
| 5238 Before the event, the source of the event is displayed in parentheses, | |
| 5239 and is one of the following: | |
| 5240 | |
| 5241 \(real) A real event from the window system or | |
| 5242 terminal driver, as far as XEmacs can tell. | |
| 5243 | |
| 5244 \(keyboard macro) An event generated from a keyboard macro. | |
| 5245 | |
| 5246 \(unread-command-events) An event taken from `unread-command-events'. | |
| 5247 | |
| 5248 \(unread-command-event) An event taken from `unread-command-event'. | |
| 5249 | |
| 5250 \(command event queue) An event taken from an internal queue. | |
| 5251 Events end up on this queue when | |
| 5252 `enqueue-eval-event' is called or when | |
| 5253 user or eval events are received while | |
| 5254 XEmacs is blocking (e.g. in `sit-for', | |
| 5255 `sleep-for', or `accept-process-output', | |
| 5256 or while waiting for the reply to an | |
| 5257 X selection). | |
| 5258 | |
| 5259 \(->keyboard-translate-table) The result of an event translated through | |
| 5260 keyboard-translate-table. Note that in | |
| 5261 this case, two events are printed even | |
| 5262 though only one is really generated. | |
| 5263 | |
| 5264 \(SIGINT) A faked C-g resulting when XEmacs receives | |
| 5265 a SIGINT (e.g. C-c was pressed in XEmacs' | |
| 5266 controlling terminal or the signal was | |
| 5267 explicitly sent to the XEmacs process). | |
| 5268 */ ); | |
| 5269 debug_emacs_events = 0; | |
| 5270 #endif | |
| 5271 | |
| 2828 | 5272 DEFVAR_BOOL ("inhibit-input-event-recording", |
| 5273 &inhibit_input_event_recording /* | |
| 428 | 5274 Non-nil inhibits recording of input-events to recent-keys ring. |
| 5275 */ ); | |
| 5276 inhibit_input_event_recording = 0; | |
| 771 | 5277 |
| 428 | 5278 Vkeyboard_translate_table = |
| 5279 make_lisp_hash_table (100, HASH_TABLE_NON_WEAK, HASH_TABLE_EQ); | |
| 2828 | 5280 |
| 5281 DEFVAR_BOOL ("try-alternate-layouts-for-commands", | |
| 5282 &try_alternate_layouts_for_commands /* | |
| 5283 Non-nil means that if looking up a command from a sequence of keys typed by | |
| 5284 the user would otherwise fail, try it again with some other keyboard | |
| 5285 layout. On X11, the only alternative to the default mapping is American | |
| 5286 QWERTY; on Windows, other mappings may be available, depending on things | |
| 5287 like the default language environment for the current user, for the system, | |
| 5288 &c. | |
| 5289 | |
| 5290 With a Russian keyboard layout on X11, for example, this means that | |
| 5291 C-Cyrillic_che C-Cyrillic_a, if you haven't given that sequence a binding | |
| 5292 yourself, will invoke `find-file.' This is because `Cyrillic_che' is | |
| 5293 physically where `x' is, and `Cyrillic_a' is where `f' is, on an American | |
| 5294 Qwerty layout, and, of course, C-x C-f is a default emacs binding for that | |
| 5295 command. | |
| 5296 */ ); | |
| 5297 try_alternate_layouts_for_commands = 1; | |
| 428 | 5298 } |
| 5299 | |
| 5300 void | |
| 5301 init_event_stream (void) | |
| 5302 { | |
| 814 | 5303 /* Normally we don't initialize the event stream when running a bare |
| 5304 temacs (the check for initialized) because it may do various things | |
| 5305 (e.g. under Xt) that we don't want any traces of in a dumped xemacs. | |
| 5306 However, sometimes we need to process events in a bare temacs (in | |
| 5307 particular, when make-docfile.el is executed); so we initialize as | |
| 5308 necessary in check_event_stream_ok(). */ | |
| 428 | 5309 if (initialized) |
| 5310 { | |
| 5311 #ifdef HAVE_UNIXOID_EVENT_LOOP | |
| 5312 init_event_unixoid (); | |
| 5313 #endif | |
| 5314 #ifdef HAVE_X_WINDOWS | |
| 5315 if (!strcmp (display_use, "x")) | |
| 5316 init_event_Xt_late (); | |
| 5317 else | |
| 5318 #endif | |
| 462 | 5319 #ifdef HAVE_GTK |
| 5320 if (!strcmp (display_use, "gtk")) | |
| 5321 init_event_gtk_late (); | |
| 5322 else | |
| 5323 #endif | |
| 428 | 5324 #ifdef HAVE_MS_WINDOWS |
| 5325 if (!strcmp (display_use, "mswindows")) | |
| 5326 init_event_mswindows_late (); | |
| 5327 else | |
| 5328 #endif | |
| 5329 { | |
| 5330 /* For TTY's, use the Xt event loop if we can; it allows | |
| 5331 us to later open an X connection. */ | |
| 5332 #if defined (HAVE_MS_WINDOWS) && (!defined (HAVE_TTY) \ | |
| 5333 || (defined (HAVE_MSG_SELECT) \ | |
| 5334 && !defined (DEBUG_TTY_EVENT_STREAM))) | |
| 5335 init_event_mswindows_late (); | |
| 5336 #elif defined (HAVE_X_WINDOWS) && !defined (DEBUG_TTY_EVENT_STREAM) | |
| 5337 init_event_Xt_late (); | |
| 5338 #elif defined (HAVE_TTY) | |
| 5339 init_event_tty_late (); | |
| 5340 #endif | |
| 5341 } | |
| 5342 init_interrupts_late (); | |
| 5343 } | |
| 5344 } | |
| 5345 | |
| 5346 | |
| 5347 /* | |
| 853 | 5348 #### this comment is at least 8 years old and some may no longer apply. |
| 5349 | |
| 428 | 5350 useful testcases for v18/v19 compatibility: |
| 5351 | |
| 5352 (defun foo () | |
| 5353 (interactive) | |
| 5354 (setq unread-command-event (character-to-event ?A (allocate-event))) | |
| 5355 (setq x (list (read-char) | |
| 5356 ; (read-key-sequence "") ; try it with and without this | |
| 5357 last-command-char last-input-char | |
| 5358 (recent-keys) (this-command-keys)))) | |
| 5359 (global-set-key "\^Q" 'foo) | |
| 5360 | |
| 5361 without the read-key-sequence: | |
| 444 | 5362 ^Q ==> (?A ?\^Q ?A [... ^Q] [^Q]) |
| 5363 ^U^U^Q ==> (?A ?\^Q ?A [... ^U ^U ^Q] [^U ^U ^Q]) | |
| 5364 ^U^U^U^G^Q ==> (?A ?\^Q ?A [... ^U ^U ^U ^G ^Q] [^Q]) | |
| 428 | 5365 |
| 5366 with the read-key-sequence: | |
| 444 | 5367 ^Qb ==> (?A [b] ?\^Q ?b [... ^Q b] [b]) |
| 5368 ^U^U^Qb ==> (?A [b] ?\^Q ?b [... ^U ^U ^Q b] [b]) | |
| 5369 ^U^U^U^G^Qb ==> (?A [b] ?\^Q ?b [... ^U ^U ^U ^G ^Q b] [b]) | |
| 428 | 5370 |
| 5371 ;the evi-mode command "4dlj.j.j.j.j.j." is also a good testcase (gag) | |
| 5372 | |
| 5373 ;(setq x (list (read-char) quit-flag))^J^G | |
| 5374 ;(let ((inhibit-quit t)) (setq x (list (read-char) quit-flag)))^J^G | |
| 5375 ;for BOTH, x should get set to (7 t), but no result should be printed. | |
| 444 | 5376 ;; #### According to the doc of quit-flag, second test should return |
| 5377 ;; (?\^G nil). Accidentaly XEmacs returns correct value. However, | |
| 5378 ;; XEmacs 21.1.12 and 21.2.36 both fails on first test. | |
| 428 | 5379 |
| 5380 ;also do this: make two frames, one viewing "*scratch*", the other "foo". | |
| 5381 ;in *scratch*, type (sit-for 20)^J | |
| 5382 ;wait a couple of seconds, move cursor to foo, type "a" | |
| 5383 ;a should be inserted in foo. Cursor highlighting should not change in | |
| 5384 ;the meantime. | |
| 5385 | |
| 5386 ;do it with sleep-for. move cursor into foo, then back into *scratch* | |
| 5387 ;before typing. | |
| 5388 ;repeat also with (accept-process-output nil 20) | |
| 5389 | |
| 5390 ;make sure ^G aborts sit-for, sleep-for and accept-process-output: | |
| 5391 | |
| 5392 (defun tst () | |
| 5393 (list (condition-case c | |
| 5394 (sleep-for 20) | |
| 5395 (quit c)) | |
| 5396 (read-char))) | |
| 5397 | |
| 444 | 5398 (tst)^Ja^G ==> ((quit) ?a) with no signal |
| 5399 (tst)^J^Ga ==> ((quit) ?a) with no signal | |
| 5400 (tst)^Jabc^G ==> ((quit) ?a) with no signal, and "bc" inserted in buffer | |
| 428 | 5401 |
| 5402 ; with sit-for only do the 2nd test. | |
| 5403 ; Do all 3 tests with (accept-process-output nil 20) | |
| 5404 | |
| 5405 Do this: | |
| 5406 (setq enable-recursive-minibuffers t | |
| 5407 minibuffer-max-depth nil) | |
| 5408 ESC ESC ESC ESC - there are now two minibuffers active | |
| 5409 C-g C-g C-g - there should be active 0, not 1 | |
| 5410 Similarly: | |
| 5411 C-x C-f ~ / ? - wait for "Making completion list..." to display | |
| 5412 C-g - wait for "Quit" to display | |
| 5413 C-g - minibuffer should not be active | |
| 5414 however C-g before "Quit" is displayed should leave minibuffer active. | |
| 5415 | |
| 5416 ;do it all in both v18 and v19 and make sure all results are the same. | |
| 5417 ;all of these cases matter a lot, but some in quite subtle ways. | |
| 5418 */ | |
| 5419 | |
| 5420 /* | |
| 5421 Additional test cases for accept-process-output, sleep-for, sit-for. | |
| 5422 Be sure you do all of the above checking for C-g and focus, too! | |
| 5423 | |
| 5424 ; Make sure that timer handlers are run during, not after sit-for: | |
| 5425 (defun timer-check () | |
| 5426 (add-timeout 2 '(lambda (ignore) (message "timer ran")) nil) | |
| 5427 (sit-for 5) | |
| 5428 (message "after sit-for")) | |
| 5429 | |
| 5430 ; The first message should appear after 2 seconds, and the final message | |
| 5431 ; 3 seconds after that. | |
| 5432 ; repeat above test with (sleep-for 5) and (accept-process-output nil 5) | |
| 5433 | |
| 5434 | |
| 5435 | |
| 5436 ; Make sure that process filters are run during, not after sit-for. | |
| 5437 (defun fubar () | |
| 5438 (message "sit-for = %s" (sit-for 30))) | |
| 5439 (add-hook 'post-command-hook 'fubar) | |
| 5440 | |
| 5441 ; Now type M-x shell RET | |
| 5442 ; wait for the shell prompt then send: ls RET | |
| 5443 ; the output of ls should fill immediately, and not wait 30 seconds. | |
| 5444 | |
| 5445 ; repeat above test with (sleep-for 30) and (accept-process-output nil 30) | |
| 5446 | |
| 5447 | |
| 5448 | |
| 5449 ; Make sure that recursive invocations return immediately: | |
| 5450 (defmacro test-diff-time (start end) | |
| 5451 `(+ (* (- (car ,end) (car ,start)) 65536.0) | |
| 5452 (- (cadr ,end) (cadr ,start)) | |
| 5453 (/ (- (caddr ,end) (caddr ,start)) 1000000.0))) | |
| 5454 | |
| 5455 (defun testee (ignore) | |
| 5456 (sit-for 10)) | |
| 5457 | |
| 5458 (defun test-them () | |
| 5459 (let ((start (current-time)) | |
| 5460 end) | |
| 5461 (add-timeout 2 'testee nil) | |
| 5462 (sit-for 5) | |
| 5463 (add-timeout 2 'testee nil) | |
| 5464 (sleep-for 5) | |
| 5465 (add-timeout 2 'testee nil) | |
| 5466 (accept-process-output nil 5) | |
| 5467 (setq end (current-time)) | |
| 5468 (test-diff-time start end))) | |
| 5469 | |
| 5470 (test-them) should sit for 15 seconds. | |
| 5471 Repeat with testee set to sleep-for and accept-process-output. | |
| 5472 These should each delay 36 seconds. | |
| 5473 | |
| 5474 */ |