3062
+ − 1 ## Copyright (C) 2003, 2005 Ben Wing.
1314
+ − 2
380
+ − 3 ## DIST: This is the distribution Makefile for XEmacs. configure can
+ − 4 ## DIST: make most of the changes to this file you might want, so try
+ − 5 ## DIST: that first.
+ − 6
+ − 7 ## This file is part of XEmacs.
+ − 8
+ − 9 ## XEmacs is free software; you can redistribute it and/or modify it
+ − 10 ## under the terms of the GNU General Public License as published by the
+ − 11 ## Free Software Foundation; either version 2, or (at your option) any
+ − 12 ## later version.
+ − 13
+ − 14 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT
+ − 15 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ − 16 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ − 17 ## for more details.
+ − 18
+ − 19 ## You should have received a copy of the GNU General Public License
+ − 20 ## along with XEmacs; see the file COPYING. If not, write to
+ − 21 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ − 22 ## Boston, MA 02111-1307, USA.
+ − 23
+ − 24 ## make all to compile and build XEmacs.
+ − 25 ## make install to build and install it.
+ − 26 ## make install-only to install after a previous complete build
+ − 27 ## make TAGS to update tags tables.
+ − 28
+ − 29 ## make clean or make mostlyclean
+ − 30 ## Delete all files from the current directory that are normally
+ − 31 ## created by building the program. Don't delete the files that
+ − 32 ## record the configuration. Also preserve files that could be made
+ − 33 ## by building, but normally aren't because the distribution comes
+ − 34 ## with them.
+ − 35
+ − 36 ## Delete `.dvi' files here if they are not part of the distribution.
+ − 37
+ − 38 ## make distclean
+ − 39 ## Delete all files from the current directory that are created by
+ − 40 ## configuring or building the program. If you have unpacked the
+ − 41 ## source and built the program without creating any other files,
+ − 42 ## `make distclean' should leave only the files that were in the
+ − 43 ## distribution.
+ − 44
+ − 45 ## make realclean
+ − 46 ## Delete everything from the current directory that can be
+ − 47 ## reconstructed with this Makefile. This typically includes
+ − 48 ## everything deleted by distclean, plus more: C source files
+ − 49 ## produced by Bison, tags tables, info files, and so on.
+ − 50
+ − 51 ## make extraclean
+ − 52 ## Still more severe - delete backup and autosave files, too.
+ − 53
424
+ − 54 #define NOT_C_CODE
+ − 55 #include "src/config.h"
+ − 56
380
+ − 57 #ifdef USE_GNU_MAKE
2427
+ − 58 RECURSIVE_MAKE_ARGS=
380
+ − 59 #else
+ − 60 @SET_MAKE@
2427
+ − 61 RECURSIVE_MAKE_ARGS=@RECURSIVE_MAKE_ARGS@
380
+ − 62 #endif
+ − 63
+ − 64 SHELL = /bin/sh
+ − 65 LANG = C
396
+ − 66 LC_ALL = C
380
+ − 67 RM = rm -f
426
+ − 68 MAKEPATH=./lib-src/make-path
380
+ − 69 pwd = /bin/pwd
430
+ − 70 TAR = tar
380
+ − 71
+ − 72 ## ==================== Things `configure' Might Edit ====================
+ − 73
+ − 74 CC=@CC@
+ − 75 CPP=@CPP@
+ − 76 LN_S=@LN_S@
+ − 77 CFLAGS=@CFLAGS@
+ − 78 CPPFLAGS=@CPPFLAGS@
708
+ − 79 LDFLAGS=@LDFLAGS@
380
+ − 80
+ − 81 ## These help us choose version- and architecture-specific directories
+ − 82 ## to install files in.
+ − 83
+ − 84 ## This should be the number of the XEmacs version we're building,
+ − 85 ## like `19.12' or `19.13'.
+ − 86 version=@version@
+ − 87
+ − 88 ## This should be the name of the configuration we're building XEmacs
+ − 89 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+ − 90 configuration=@configuration@
+ − 91
+ − 92 ## This will be the name of the generated binary and is set automatically
+ − 93 ## by configure.
+ − 94 PROGNAME=@PROGNAME@
+ − 95
+ − 96 ## ==================== Where To Install Things ====================
+ − 97
+ − 98 ## The default location for installation. Everything is placed in
+ − 99 ## subdirectories of this directory. The default values for many of
+ − 100 ## the variables below are expressed in terms of this one, so you may
+ − 101 ## not need to change them. This defaults to /usr/local.
+ − 102 prefix=@prefix@
+ − 103
422
+ − 104 ## Variable data (as per each program update) goes here
+ − 105 ## The default is ${PROGNAME}
+ − 106 inststaticdir=@inststaticdir@
+ − 107
+ − 108 ## Static data (constant across program updates) goes here
+ − 109 ## The default is ${PROGNAME}-${version}
+ − 110 instvardir=@instvardir@
+ − 111
380
+ − 112 ## Like `prefix', but used for architecture-specific files.
+ − 113 exec_prefix=@exec_prefix@
+ − 114
+ − 115 ## Where to install XEmacs and other binaries that people will want to
+ − 116 ## run directly (like etags).
+ − 117 bindir=@bindir@
+ − 118
4118
+ − 119 ## Base for installing architecture-independent data files.
+ − 120 ## ${infodir} and ${mandir} are subdirectories of this.
+ − 121 datarootdir=@datarootdir@
+ − 122
380
+ − 123 ## Where to install architecture-independent data files.
+ − 124 ## ${lispdir} and ${etcdir} are subdirectories of this.
+ − 125 datadir=@datadir@
+ − 126
+ − 127 ## Where to install and expect the files that XEmacs modifies as it runs.
+ − 128 ## These files are all architecture-independent. Right now, the
+ − 129 ## only such data is the locking directory;
+ − 130 statedir=@statedir@
+ − 131
+ − 132 ## Where to install and expect executable files to be run by XEmacs
+ − 133 ## rather than directly by users, and other architecture-dependent data
+ − 134 ## ${archlibdir} is a subdirectory of this.
+ − 135 libdir=@libdir@
+ − 136
+ − 137 ## Where to install XEmacs's man pages, and what extension they should have.
+ − 138 mandir=@mandir@
+ − 139 manext=.1
+ − 140
+ − 141 ## Where to install and expect the info files describing XEmacs. In the
+ − 142 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
+ − 143 ## since there are now many packages documented with the texinfo
+ − 144 ## system, it is inappropriate to imply that it is part of XEmacs.
+ − 145 infodir=@infodir@
+ − 146
+ − 147 ## Document me.
+ − 148 ## See callproc.c for code which references this.
+ − 149 infopath=@infopath@
+ − 150
+ − 151 ## Where to find the source code. The source code for XEmacs's C kernel is
+ − 152 ## expected to be in ${srcdir}/src, and the source code for XEmacs's
+ − 153 ## utility programs is expected to be in ${srcdir}/lib-src. This is
+ − 154 ## set by the configure script's `--srcdir' option.
+ − 155 srcdir=@srcdir@
+ − 156
+ − 157 ## Where the build is done.
+ − 158 blddir=@blddir@
+ − 159
+ − 160 ## ==================== XEmacs-specific directories ====================
+ − 161
+ − 162 ## These variables hold the values XEmacs will actually use. They are
+ − 163 ## based on the values of the standard Make variables above.
+ − 164
+ − 165 ## Where to install the lisp files distributed with
+ − 166 ## XEmacs. This includes the XEmacs version, so that the
+ − 167 ## lisp files for different versions of XEmacs will install
+ − 168 ## themselves in separate directories.
+ − 169 lispdir=@lispdir@
+ − 170
388
+ − 171 ## Where to install the module files distributed with
+ − 172 ## XEmacs. This includes the XEmacs version, so that the
+ − 173 ## module files for different versions of XEmacs will install
+ − 174 ## themselves in separate directories.
+ − 175 moduledir=@moduledir@
+ − 176
380
+ − 177 ## Directory XEmacs should search for lisp files specific
+ − 178 ## to this site (i.e. customizations), before consulting
+ − 179 ## ${lispdir}.
+ − 180 sitelispdir=@sitelispdir@
+ − 181
388
+ − 182 ## Directory XEmacs should search for module files specific
+ − 183 ## to this site (i.e. customizations), before consulting
+ − 184 ## ${moduledir}.
+ − 185 sitemoduledir=@sitemoduledir@
+ − 186
380
+ − 187 ## Where XEmacs will search for its lisp files while
+ − 188 ## building. This is only used during the process of
+ − 189 ## compiling XEmacs, to help XEmacs find its lisp files
+ − 190 ## before they've been installed in their final location.
+ − 191 ## It's usually identical to lispdir, except that the
+ − 192 ## entry for the directory containing the installed lisp
+ − 193 ## files has been replaced with ../lisp. This should be a
+ − 194 ## colon-separated list of directories.
+ − 195 buildlispdir=${srcdir}/lisp
+ − 196
+ − 197 ## Where to install the other architecture-independent
+ − 198 ## data files distributed with XEmacs (like the tutorial,
+ − 199 ## the cookie recipes and the Zippy database). This path
+ − 200 ## usually contains the XEmacs version number, so the data
+ − 201 ## files for multiple versions of XEmacs may be installed
+ − 202 ## at once.
+ − 203 etcdir=@etcdir@
+ − 204
424
+ − 205 ## Where to put the DOC file.
420
+ − 206 docdir=@docdir@
+ − 207
380
+ − 208 ## Where to put executables to be run by XEmacs rather than
+ − 209 ## the user. This path usually includes the XEmacs version
+ − 210 ## and configuration name, so that multiple configurations
+ − 211 ## for multiple versions of XEmacs may be installed at
+ − 212 ## once.
+ − 213 archlibdir=@archlibdir@
+ − 214
+ − 215 ## ==================== Utility Programs for the Build ====================
+ − 216
+ − 217 ## Allow the user to specify the install program.
+ − 218 INSTALL = @install_pp@ @INSTALL@
+ − 219 INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ − 220 INSTALL_DATA = @INSTALL_DATA@
+ − 221
+ − 222 ## ============================= Targets ==============================
+ − 223
3062
+ − 224 ## Subdirectories to make recursively. `lisp' is not included currently;
+ − 225 ## rebuilding the compiled lisp files is done in the `src' make and requires
+ − 226 ## building XEmacs first.
380
+ − 227 MAKE_SUBDIR = @MAKE_SUBDIR@
+ − 228
+ − 229 ## Subdirectories that can be made recursively.
424
+ − 230 SUBDIR = ${MAKE_SUBDIR} man
+ − 231
380
+ − 232 ## The makefiles of the directories in ${MAKE_SUBDIR}.
+ − 233 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
+ − 234
+ − 235 ## Subdirectories to `make install-arch-dep' recursively
+ − 236 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
+ − 237
+ − 238 ## Subdirectories to install, and where they'll go.
+ − 239 ## lib-src's makefile knows how to install it, so we don't do that here.
+ − 240 ## When installing the info files, we need to do special things to
+ − 241 ## avoid nuking an existing dir file, so we don't do that here;
+ − 242 ## instead, we have written out explicit code in the `install' targets.
+ − 243 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+ − 244 COPYDESTS = ${etcdir} ${lispdir}
3074
+ − 245 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/config.h lwlib/config.h src/sheap-adjust.h src/xemacs.def etc/PROBLEMS
380
+ − 246
1314
+ − 247 ## MAKE_SUBDIR will always be of the form lib-src ... src, where
+ − 248 ## `...' includes various other directories that may be inserted by
+ − 249 ## configure.
+ − 250 all: Makefile ${GENERATED_HEADERS} ${MAKE_SUBDIR} info
380
+ − 251
+ − 252 ## For performance and consistency, no built-in rules
+ − 253 .SUFFIXES:
+ − 254
1314
+ − 255 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR}
+ − 256 .PHONY: ${SUBDIR} all beta
380
+ − 257
+ − 258 ## Convenience target for XEmacs beta testers
3062
+ − 259 beta: elcclean all
380
+ − 260
+ − 261 ## Convenience target for XEmacs maintainers
+ − 262 ## This would run `make-xemacsdist' if I were really confident that everything
+ − 263 ## was turnkey.
1314
+ − 264 dist: all
380
+ − 265
+ − 266 ## Convenience target for XEmacs maintainers
+ − 267 ## Updates some rarely generated files:
3752
+ − 268 ## - configure from configure.ac
380
+ − 269 ## - config.values.in from configure
+ − 270 ## - src/depend from src/*.[ch]
+ − 271 .PHONY: config configure depend
+ − 272 config: configure depend
426
+ − 273 configure: ${srcdir}/configure ${srcdir}/lib-src/config.values.in
+ − 274
3752
+ − 275 ${srcdir}/configure : ${srcdir}/configure.ac
380
+ − 276 cd ${srcdir} && autoconf
+ − 277
426
+ − 278 ${srcdir}/lib-src/config.values.in : ${srcdir}/configure
+ − 279 cd ${srcdir} && $(SHELL) lib-src/config.values.sh
+ − 280
442
+ − 281 depend ${srcdir}/src/depend:
2427
+ − 282 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) depend
380
+ − 283
1314
+ − 284 check:
2427
+ − 285 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@
380
+ − 286
1314
+ − 287 check-features: all
2427
+ − 288 cd ./src && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@
380
+ − 289
+ − 290 ## We have to force the building of Emacs.ad.h as well in order to get it
+ − 291 ## updated correctly when VPATH is being used. Since we use move-if-change,
+ − 292 ## it will only actually change if the user modified ${etcdir}/Emacs.ad.
+ − 293 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
+ − 294 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
+ − 295 @$(RM) src/Emacs.ad.h
+ − 296 @(echo "/* Do not edit this file!" ; \
+ − 297 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
+ − 298 echo " */" ; \
426
+ − 299 $(SHELL) ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
380
+ − 300 src/Emacs.ad.h
+ − 301
+ − 302 src/sheap-adjust.h:
+ − 303 @echo "Resetting \`src/sheap-adjust.h'."; \
+ − 304 (echo "/* Do not edit this file!" ; \
+ − 305 echo " Automatically generated by XEmacs */" ; \
1157
+ − 306 echo "#define SHEAP_ADJUSTMENT 0") > $@
380
+ − 307
+ − 308 src: @SRC_SUBDIR_DEPS@ FRC.src
+ − 309 pkg-src/tree-x: pkg-src/FRC.tree-x
+ − 310 lib-src: FRC.lib-src
+ − 311 lwlib: FRC.lwlib
+ − 312 dynodump: FRC.dynodump
+ − 313 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
+ − 314 FRC.lisp.finder-inf.el:
+ − 315
+ − 316 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
2427
+ − 317 cd ./$@ && $(MAKE) $(RECURSIVE_MAKE_ARGS) all
2259
+ − 318
+ − 319 ## Building modules depends on ellcc, found in lib-src.
2973
+ − 320 modules/sample modules/ldap modules/zlib modules/base64: lib-src
+ − 321 modules/postgresql modules/canna: lib-src
380
+ − 322
801
+ − 323 Makefile: ${srcdir}/Makefile.in.in config.status
380
+ − 324 ./config.status
2427
+ − 325 $(MAKE) $(RECURSIVE_MAKE_ARGS) all
380
+ − 326
+ − 327 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
+ − 328 ./config.status
+ − 329
+ − 330 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
+ − 331 ./config.status
+ − 332
+ − 333 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
+ − 334 ./config.status
+ − 335
+ − 336 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
+ − 337 ./config.status
+ − 338
+ − 339 src/config.h: ${srcdir}/src/config.h.in
+ − 340 ./config.status && touch $@
+ − 341
+ − 342 src/paths.h: ${srcdir}/src/paths.h.in
+ − 343 ./config.status && touch $@
+ − 344
+ − 345 lwlib/config.h: ${srcdir}/lwlib/config.h.in
+ − 346 ./config.status && touch $@
+ − 347
1633
+ − 348 src/xemacs.def: $(srcdir)/src/xemacs.def.in.in
+ − 349 ./config.status && touch $@
+ − 350
3074
+ − 351 etc/PROBLEMS: $(srcdir)/PROBLEMS
+ − 352 cp $^ $@
+ − 353
380
+ − 354 ## ==================== Installation ====================
+ − 355
+ − 356 ## If we let lib-src do its own installation, that means we
+ − 357 ## don't have to duplicate the list of utilities to install in
+ − 358 ## this Makefile as well.
+ − 359
+ − 360 ## On AIX, use tar xBf.
+ − 361 ## On Xenix, use tar xpf.
+ − 362
+ − 363 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
1314
+ − 364 .PHONY: check check-features
380
+ − 365
+ − 366 ## We delete each directory in ${COPYDESTS} before we copy into it;
+ − 367 ## that way, we can reinstall over directories that have been put in
+ − 368 ## place with their files read-only (perhaps because they are checked
+ − 369 ## into RCS). In order to make this safe, we make sure that the
+ − 370 ## source exists and is distinct from the destination.
+ − 371
+ − 372 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
+ − 373 ## they "won't ever modify src/paths.h". But that means you can't do
+ − 374 ## 'make install' right off the bat because src/paths.h won't exist.
+ − 375 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
+ − 376 ## don't see the point in avoiding modifying paths.h. It creates an
+ − 377 ## inconsistency in the build process. So we go ahead and depend on
+ − 378 ## all. --cet
+ − 379
+ − 380 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
+ − 381
+ − 382 install: all check-features install-arch-dep install-arch-indep
+ − 383
+ − 384 install-arch-dep: mkdir
+ − 385 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
2427
+ − 386 (cd ./$${subdir} && $(MAKE) $(RECURSIVE_MAKE_ARGS) install prefix=${prefix} \
380
+ − 387 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
+ − 388 archlibdir=${archlibdir}) ; done
+ − 389 if test "`(cd ${archlibdir} && $(pwd))`" != \
+ − 390 "`(cd ./lib-src && $(pwd))`"; then \
+ − 391 if test -f ../Installation; then \
+ − 392 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
+ − 393 fi; \
422
+ − 394 ${INSTALL_DATA} lib-src/config.values ${docdir}/config.values; \
420
+ − 395 ${INSTALL_DATA} lib-src/DOC ${docdir}/DOC; \
380
+ − 396 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
+ − 397 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
+ − 398 else true; fi
2720
+ − 399 #if (defined(PDUMP) && !defined (DUMP_IN_EXEC)) || (defined (PDUMP) && defined(WIN32_NATIVE))
442
+ − 400 ${INSTALL_DATA} src/${PROGNAME}.dmp ${bindir}/${PROGNAME}-${version}-`src/${PROGNAME} -sd`.dmp
+ − 401 #endif
+ − 402 #ifdef WIN32_NATIVE
424
+ − 403 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}
+ − 404 -chmod 0755 ${bindir}/${PROGNAME}
+ − 405 #else
2388
+ − 406 # ifdef CYGWIN
+ − 407 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}.exe
+ − 408 -chmod 0755 ${bindir}/${PROGNAME}-${version}.exe
+ − 409 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version}.exe ./${PROGNAME}
+ − 410 # else
380
+ − 411 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
+ − 412 -chmod 0755 ${bindir}/${PROGNAME}-${version}
+ − 413 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
442
+ − 414 # endif /* CYGWIN */
+ − 415 #endif /* WIN32_NATIVE */
380
+ − 416 if test "${prefix}" != "${exec_prefix}"; then \
426
+ − 417 $(MAKEPATH) ${exec_prefix}/lib/${instvardir}; \
380
+ − 418 for dir in \
422
+ − 419 lib/${inststaticdir} \
+ − 420 lib/${instvardir}/etc \
+ − 421 lib/${instvardir}/info \
+ − 422 lib/${instvardir}/lisp; do \
380
+ − 423 if test ! -d ${exec_prefix}/$${dir}; then \
+ − 424 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
+ − 425 done; \
+ − 426 fi
997
+ − 427 #ifdef HAVE_SHLIB
+ − 428 $(INSTALL_DATA) $(srcdir)/modules/auto-autoloads.* $(moduledir)
+ − 429 #endif
380
+ − 430
+ − 431 install-arch-indep: mkdir info
+ − 432 -@set ${COPYDESTS} ; \
+ − 433 for dir in ${COPYDIR} ; do \
+ − 434 if test "`(cd $$1 && $(pwd))`" != \
+ − 435 "`(cd $${dir} && $(pwd))`"; then \
+ − 436 : do nothing - echo "rm -rf $$1" ; \
+ − 437 fi ; \
+ − 438 shift ; \
+ − 439 done
+ − 440 -set ${COPYDESTS} ; \
+ − 441 for dir in ${COPYDESTS} ; do \
+ − 442 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
+ − 443 done ; \
+ − 444 for dir in ${COPYDIR} ; do \
+ − 445 dest=$$1 ; shift ; \
+ − 446 test -d $${dir} \
+ − 447 -a "`(cd $${dir} && $(pwd))`" != \
+ − 448 "`(cd $${dest} && $(pwd))`" \
+ − 449 && (echo "Copying $${dir}..." ; \
430
+ − 450 (cd $${dir} && $(TAR) -cf - . ) | \
+ − 451 (cd $${dest} && umask 022 && $(TAR) -xf - );\
380
+ − 452 chmod 0755 $${dest}; \
+ − 453 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
+ − 454 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
+ − 455 done) ; \
+ − 456 done
+ − 457 if test "`(cd ${srcdir}/info && $(pwd))`" != \
+ − 458 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
+ − 459 if test ! -f ${infodir}/dir -a -f dir ; then \
+ − 460 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
+ − 461 fi ; \
+ − 462 for file in *.info* ; do \
+ − 463 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
+ − 464 chmod 0644 ${infodir}/$${file}; \
+ − 465 done ; \
+ − 466 fi
+ − 467 cd ${srcdir}/etc && \
+ − 468 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
+ − 469 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
+ − 470 chmod 0644 ${mandir}/$${page}${manext} ; \
+ − 471 done
2128
+ − 472 @echo "If you would like to save approximately 4M of disk space, do"
380
+ − 473 @echo "make gzip-el"
+ − 474 @echo "or you may run "
+ − 475 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
+ − 476 @echo "Where lispdir is where the lisp files were installed, i.e.,"
+ − 477 @echo "${lispdir}"
+ − 478
+ − 479 gzip-el:
426
+ − 480 $(SHELL) ${srcdir}/lib-src/gzip-el.sh ${lispdir}
380
+ − 481
+ − 482 ## Build all the directories to install XEmacs in.
+ − 483 ## Since we may be creating several layers of directories,
+ − 484 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
+ − 485 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
+ − 486 mkdir: FRC.mkdir
444
+ − 487 ${MAKEPATH} ${COPYDESTS} ${docdir} ${infodir} ${archlibdir} \
1349
+ − 488 ${mandir} ${bindir} ${datadir} ${libdir} \
598
+ − 489 #ifdef HAVE_SHLIB
+ − 490 ${moduledir} ${sitemoduledir} \
+ − 491 #endif
+ − 492 ${sitelispdir}
380
+ − 493
+ − 494 ## Delete all the installed files that the `install' target would
+ − 495 ## create (but not the noninstalled files such as `make all' would
+ − 496 ## create).
+ − 497
+ − 498 #### Don't delete the lisp and etc directories if they're in the source tree.
+ − 499 #### This target has not been updated in sometime and until it is it
+ − 500 #### would be extremely dangerous for anyone to use it.
+ − 501 ##uninstall:
+ − 502 ## (cd ./lib-src; \
2427
+ − 503 ## $(MAKE) $(RECURSIVE_MAKE_ARGS) uninstall \
380
+ − 504 ## prefix=${prefix} exec_prefix=${exec_prefix} \
+ − 505 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+ − 506 ## for dir in ${lispdir} ${etcdir} ; do \
+ − 507 ## case `(cd $${dir} ; $(pwd))` in \
+ − 508 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \
+ − 509 ## * ) $(RM) $${dir} ;; \
+ − 510 ## esac ; \
+ − 511 ## case $${dir} in \
+ − 512 ## ${datadir}/${PROGNAME}/${version}/* ) \
+ − 513 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \
+ − 514 ## ;; \
+ − 515 ## esac ; \
+ − 516 ## done
+ − 517 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
+ − 518 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
+ − 519 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
+ − 520
+ − 521
+ − 522 ## Some makes seem to remember that they've built something called FRC,
+ − 523 ## so you can only use a given FRC once per makefile.
+ − 524 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
3062
+ − 525 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.extraclean FRC.tags:
+ − 526 FRC.distclean-noconfig FRC.realclean-noconfig FRC.extraclean-noconfig:
380
+ − 527
+ − 528 ## ==================== Cleaning up and miscellanea ====================
+ − 529
3062
+ − 530 .PHONY: mostlyclean clean distclean realclean extraclean elcclean
+ − 531 .PHONY: distclean-noconfig realclean-noconfig extraclean-noconfig
+ − 532 .PHONY: top-mostlyclean top-clean top-distclean top-realclean top-extraclean
+ − 533 .PHONY: top-distclean-noconfig top-realclean-noconfig top-extraclean-noconfig
380
+ − 534
+ − 535 ## `mostlyclean'
+ − 536 ## Like `clean', but may refrain from deleting a few files that people
+ − 537 ## normally don't want to recompile. For example, the `mostlyclean'
+ − 538 ## target for GCC does not delete `libgcc.a', because recompiling it
+ − 539 ## is rarely necessary and takes a lot of time.
3062
+ − 540 top-mostlyclean: FRC.mostlyclean
3083
+ − 541 -$(RM) core
3062
+ − 542
+ − 543 mostlyclean: top-mostlyclean
2427
+ − 544 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 545
+ − 546 ## `clean'
+ − 547 ## Delete all files from the current directory that are normally
+ − 548 ## created by building the program. Don't delete the files that
+ − 549 ## record the configuration. Also preserve files that could be made
+ − 550 ## by building, but normally aren't because the distribution comes
+ − 551 ## with them.
+ − 552
+ − 553 ## Delete `.dvi' files here if they are not part of the distribution.
1889
+ − 554
+ − 555 ## Remove the generated load files here; they cause lots of problems
+ − 556 ## when they don't work right. (beta can't depend on distclean, which
+ − 557 ## removes necessary files generated by configure.)
3062
+ − 558 top-clean: FRC.clean
3083
+ − 559 -$(RM) core lisp/auto-autoloads.el* lisp/custom-load.el*
+ − 560 -$(RM) lisp/mule/auto-autoloads.el* lisp/mule/custom-load.el*
+ − 561 -$(RM) modules/auto-autoloads.el* modules/custom-load.el*
+ − 562 -$(RM) etc/PROBLEMS
380
+ − 563
3062
+ − 564 clean: top-mostlyclean top-clean
+ − 565 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
+ − 566
+ − 567 ## `distclean-noconfig'
+ − 568 ## Like `distclean' but don't delete files created by `configure'.
+ − 569 top-distclean-noconfig: FRC.distclean-noconfig
3083
+ − 570 -$(RM) TAGS .sbinit lock/* lisp/finder-inf.el*
3062
+ − 571
+ − 572 distclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig
+ − 573 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
+ − 574
380
+ − 575 ## `distclean'
+ − 576 ## Delete all files from the current directory that are created by
+ − 577 ## configuring or building the program. If you have unpacked the
+ − 578 ## source and built the program without creating any other files,
+ − 579 ## `make distclean' should leave only the files that were in the
+ − 580 ## distribution.
3062
+ − 581 top-distclean: FRC.distclean
3083
+ − 582 -$(RM) config.status config.log confdefs.h config-tmp-* build-install Installation
+ − 583 -$(RM) GNUmakefile Makefile Makefile.in
+ − 584 -$(RM) Installation.el Installation.elc
3062
+ − 585
+ − 586 distclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean
+ − 587 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 588
3062
+ − 589 ## `realclean-noconfig'
+ − 590 ## Delete everything that can be reconstructed by `make'. Don't delete
+ − 591 ## anything requiring reconfiguration.
+ − 592 top-realclean-noconfig: FRC.realclean-noconfig
3083
+ − 593 -$(RM) *.elc lisp/*.elc lisp/mule/*.elc lisp/term/*.elc modules/*.elc
3062
+ − 594
+ − 595 realclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig top-realclean-noconfig
2427
+ − 596 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
3062
+ − 597
+ − 598 top-realclean: FRC.realclean
+ − 599
+ − 600 elcclean: realclean-noconfig
380
+ − 601
+ − 602 ## `realclean'
+ − 603 ## Delete everything from the current directory that can be
+ − 604 ## reconstructed with this Makefile. This typically includes
+ − 605 ## everything deleted by distclean, plus more: C source files
+ − 606 ## produced by Bison, tags tables, info files, and so on.
+ − 607
+ − 608 ## One exception, however: `make realclean' should not delete
+ − 609 ## `configure' even if `configure' can be remade using a rule in the
+ − 610 ## Makefile. More generally, `make realclean' should not delete
+ − 611 ## anything that needs to exist in order to run `configure' and then
+ − 612 ## begin to build the program.
3062
+ − 613 realclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean top-realclean-noconfig top-realclean
2427
+ − 614 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
3062
+ − 615
+ − 616 ## `extraclean-noconfig'
+ − 617 ## Like `extraclean' but don't delete anything requiring reconfiguration.
+ − 618 top-extraclean-noconfig: FRC.extraclean-noconfig
3083
+ − 619 -$(RM) *~ \#*
3062
+ − 620
+ − 621 extraclean-noconfig: top-mostlyclean top-clean top-distclean-noconfig top-realclean-noconfig top-extraclean-noconfig
+ − 622 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 623
+ − 624 ## This doesn't actually appear in the coding standards, but Karl
+ − 625 ## says GCC supports it, and that's where the configuration part of
+ − 626 ## the coding standards seem to come from. It's like distclean, but
+ − 627 ## it deletes backup and autosave files too.
3062
+ − 628 top-extraclean: FRC.extraclean
+ − 629
+ − 630 extraclean: top-mostlyclean top-clean top-distclean-noconfig top-distclean top-realclean-noconfig top-realclean top-extraclean-noconfig top-extraclean
2427
+ − 631 for d in $(SUBDIR); do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 632
+ − 633 ## Unlocking and relocking. The idea of these productions is to reduce
+ − 634 ## hassles when installing an incremental tar of XEmacs. Do `make unlock'
+ − 635 ## before unlocking the file to take the write locks off all sources so
+ − 636 ## that tar xvof will overwrite them without fuss. Then do `make relock'
+ − 637 ## afterward so that VC mode will know which files should be checked in
+ − 638 ## if you want to mung them.
+ − 639
+ − 640 ## Note: it's no disaster if these productions miss a file or two; tar
+ − 641 ## and VC will swiftly let you know if this happens, and it is easily
+ − 642 ## corrected.
2536
+ − 643 SOURCES = ChangeLog INSTALL Makefile.in.in PROBLEMS \
380
+ − 644 README build-install.in configure make-dist move-if-change
+ − 645
1314
+ − 646 .PHONY: unlock relock TAGS tags dist info dvi mcs
380
+ − 647
+ − 648 unlock:
+ − 649 chmod u+w $(SOURCES) cpp/*
+ − 650 -cd ./elisp && chmod u+w Makefile README *.texi
2427
+ − 651 for d in src etc lib-src lisp; do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 652 cd ./lisp/term && chmod u+w README *.el
+ − 653 cd ./man && chmod u+w *texi* ChangeLog split-man
+ − 654 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
+ − 655
+ − 656 relock:
+ − 657 chmod u-w $(SOURCES) cpp/*
+ − 658 -cd ./elisp && chmod u-w Makefile README *.texi
2427
+ − 659 for d in src etc lib-src lisp; do (cd ./$$d && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@); done
380
+ − 660 cd ./lisp/term && chmod u+w README *.el
+ − 661 cd ./man && chmod u+w *texi* ChangeLog split-man
+ − 662 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
+ − 663
+ − 664 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
+ − 665 tagslisp = lisp
+ − 666 TAGS tags: FRC.tags
+ − 667 @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
3083
+ − 668 -$(RM) ${srcdir}/TAGS
380
+ − 669 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
+ − 670 echo "Using etags from `which etags`."
+ − 671 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
1011
+ − 672 find src lwlib lib-src modules ${PRUNE_VC} -name '*.[ch]' -print | \
1441
+ − 673 xargs etags -a \
+ − 674 -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/' \
+ − 675 -r '/^DEFUN[ ]*([ ]*"\([^"]+\)"[ ]*,[ ]*\([A-Za-z0-9_]+\)/\2/'; \
380
+ − 676 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
+ − 677 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
+ − 678
+ − 679 info: FRC.info
2427
+ − 680 cd ${srcdir}/man && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@
380
+ − 681
+ − 682 dvi:
2427
+ − 683 cd ${srcdir}/man && $(MAKE) $(RECURSIVE_MAKE_ARGS) $@
380
+ − 684
+ − 685 ## Fix up version information in executables (Solaris-only)
+ − 686 mcs:
+ − 687 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
+ − 688 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
+ − 689 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
+ − 690 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \
+ − 691 done
